1 /*
2  * AHCI SATA platform driver
3  *
4  * Copyright 2004-2005  Red Hat, Inc.
5  *   Jeff Garzik <jgarzik@pobox.com>
6  * Copyright 2010  MontaVista Software, LLC.
7  *   Anton Vorontsov <avorontsov@ru.mvista.com>
8  *
9  * This program is free software; you can redistribute it and/or modify
10  * it under the terms of the GNU General Public License as published by
11  * the Free Software Foundation; either version 2, or (at your option)
12  * any later version.
13  */
14 
15 #include <linux/kernel.h>
16 #include <linux/gfp.h>
17 #include <linux/module.h>
18 #include <linux/init.h>
19 #include <linux/interrupt.h>
20 #include <linux/device.h>
21 #include <linux/platform_device.h>
22 #include <linux/libata.h>
23 #include <linux/ahci_platform.h>
24 #include "ahci.h"
25 
26 enum ahci_type {
27 	AHCI,		/* standard platform ahci */
28 	IMX53_AHCI,	/* ahci on i.mx53 */
29 	STRICT_AHCI,	/* delayed DMA engine start */
30 };
31 
32 static struct platform_device_id ahci_devtype[] = {
33 	{
34 		.name = "ahci",
35 		.driver_data = AHCI,
36 	}, {
37 		.name = "imx53-ahci",
38 		.driver_data = IMX53_AHCI,
39 	}, {
40 		.name = "strict-ahci",
41 		.driver_data = STRICT_AHCI,
42 	}, {
43 		/* sentinel */
44 	}
45 };
46 MODULE_DEVICE_TABLE(platform, ahci_devtype);
47 
48 
49 static const struct ata_port_info ahci_port_info[] = {
50 	/* by features */
51 	[AHCI] = {
52 		.flags		= AHCI_FLAG_COMMON,
53 		.pio_mask	= ATA_PIO4,
54 		.udma_mask	= ATA_UDMA6,
55 		.port_ops	= &ahci_ops,
56 	},
57 	[IMX53_AHCI] = {
58 		.flags		= AHCI_FLAG_COMMON,
59 		.pio_mask	= ATA_PIO4,
60 		.udma_mask	= ATA_UDMA6,
61 		.port_ops	= &ahci_pmp_retry_srst_ops,
62 	},
63 	[STRICT_AHCI] = {
64 		AHCI_HFLAGS	(AHCI_HFLAG_DELAY_ENGINE),
65 		.flags		= AHCI_FLAG_COMMON,
66 		.pio_mask	= ATA_PIO4,
67 		.udma_mask	= ATA_UDMA6,
68 		.port_ops	= &ahci_ops,
69 	},
70 };
71 
72 static struct scsi_host_template ahci_platform_sht = {
73 	AHCI_SHT("ahci_platform"),
74 };
75 
ahci_probe(struct platform_device * pdev)76 static int __init ahci_probe(struct platform_device *pdev)
77 {
78 	struct device *dev = &pdev->dev;
79 	struct ahci_platform_data *pdata = dev_get_platdata(dev);
80 	const struct platform_device_id *id = platform_get_device_id(pdev);
81 	struct ata_port_info pi = ahci_port_info[id ? id->driver_data : 0];
82 	const struct ata_port_info *ppi[] = { &pi, NULL };
83 	struct ahci_host_priv *hpriv;
84 	struct ata_host *host;
85 	struct resource *mem;
86 	int irq;
87 	int n_ports;
88 	int i;
89 	int rc;
90 
91 	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
92 	if (!mem) {
93 		dev_err(dev, "no mmio space\n");
94 		return -EINVAL;
95 	}
96 
97 	irq = platform_get_irq(pdev, 0);
98 	if (irq <= 0) {
99 		dev_err(dev, "no irq\n");
100 		return -EINVAL;
101 	}
102 
103 	if (pdata && pdata->ata_port_info)
104 		pi = *pdata->ata_port_info;
105 
106 	hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL);
107 	if (!hpriv) {
108 		dev_err(dev, "can't alloc ahci_host_priv\n");
109 		return -ENOMEM;
110 	}
111 
112 	hpriv->flags |= (unsigned long)pi.private_data;
113 
114 	hpriv->mmio = devm_ioremap(dev, mem->start, resource_size(mem));
115 	if (!hpriv->mmio) {
116 		dev_err(dev, "can't map %pR\n", mem);
117 		return -ENOMEM;
118 	}
119 
120 	/*
121 	 * Some platforms might need to prepare for mmio region access,
122 	 * which could be done in the following init call. So, the mmio
123 	 * region shouldn't be accessed before init (if provided) has
124 	 * returned successfully.
125 	 */
126 	if (pdata && pdata->init) {
127 		rc = pdata->init(dev, hpriv->mmio);
128 		if (rc)
129 			return rc;
130 	}
131 
132 	ahci_save_initial_config(dev, hpriv,
133 		pdata ? pdata->force_port_map : 0,
134 		pdata ? pdata->mask_port_map  : 0);
135 
136 	/* prepare host */
137 	if (hpriv->cap & HOST_CAP_NCQ)
138 		pi.flags |= ATA_FLAG_NCQ;
139 
140 	if (hpriv->cap & HOST_CAP_PMP)
141 		pi.flags |= ATA_FLAG_PMP;
142 
143 	ahci_set_em_messages(hpriv, &pi);
144 
145 	/* CAP.NP sometimes indicate the index of the last enabled
146 	 * port, at other times, that of the last possible port, so
147 	 * determining the maximum port number requires looking at
148 	 * both CAP.NP and port_map.
149 	 */
150 	n_ports = max(ahci_nr_ports(hpriv->cap), fls(hpriv->port_map));
151 
152 	host = ata_host_alloc_pinfo(dev, ppi, n_ports);
153 	if (!host) {
154 		rc = -ENOMEM;
155 		goto err0;
156 	}
157 
158 	host->private_data = hpriv;
159 
160 	if (!(hpriv->cap & HOST_CAP_SSS) || ahci_ignore_sss)
161 		host->flags |= ATA_HOST_PARALLEL_SCAN;
162 	else
163 		printk(KERN_INFO "ahci: SSS flag set, parallel bus scan disabled\n");
164 
165 	if (pi.flags & ATA_FLAG_EM)
166 		ahci_reset_em(host);
167 
168 	for (i = 0; i < host->n_ports; i++) {
169 		struct ata_port *ap = host->ports[i];
170 
171 		ata_port_desc(ap, "mmio %pR", mem);
172 		ata_port_desc(ap, "port 0x%x", 0x100 + ap->port_no * 0x80);
173 
174 		/* set enclosure management message type */
175 		if (ap->flags & ATA_FLAG_EM)
176 			ap->em_message_type = hpriv->em_msg_type;
177 
178 		/* disabled/not-implemented port */
179 		if (!(hpriv->port_map & (1 << i)))
180 			ap->ops = &ata_dummy_port_ops;
181 	}
182 
183 	rc = ahci_reset_controller(host);
184 	if (rc)
185 		goto err0;
186 
187 	ahci_init_controller(host);
188 	ahci_print_info(host, "platform");
189 
190 	rc = ata_host_activate(host, irq, ahci_interrupt, IRQF_SHARED,
191 			       &ahci_platform_sht);
192 	if (rc)
193 		goto err0;
194 
195 	return 0;
196 err0:
197 	if (pdata && pdata->exit)
198 		pdata->exit(dev);
199 	return rc;
200 }
201 
ahci_remove(struct platform_device * pdev)202 static int __devexit ahci_remove(struct platform_device *pdev)
203 {
204 	struct device *dev = &pdev->dev;
205 	struct ahci_platform_data *pdata = dev_get_platdata(dev);
206 	struct ata_host *host = dev_get_drvdata(dev);
207 
208 	ata_host_detach(host);
209 
210 	if (pdata && pdata->exit)
211 		pdata->exit(dev);
212 
213 	return 0;
214 }
215 
216 #ifdef CONFIG_PM
ahci_suspend(struct device * dev)217 static int ahci_suspend(struct device *dev)
218 {
219 	struct ahci_platform_data *pdata = dev_get_platdata(dev);
220 	struct ata_host *host = dev_get_drvdata(dev);
221 	struct ahci_host_priv *hpriv = host->private_data;
222 	void __iomem *mmio = hpriv->mmio;
223 	u32 ctl;
224 	int rc;
225 
226 	if (hpriv->flags & AHCI_HFLAG_NO_SUSPEND) {
227 		dev_err(dev, "firmware update required for suspend/resume\n");
228 		return -EIO;
229 	}
230 
231 	/*
232 	 * AHCI spec rev1.1 section 8.3.3:
233 	 * Software must disable interrupts prior to requesting a
234 	 * transition of the HBA to D3 state.
235 	 */
236 	ctl = readl(mmio + HOST_CTL);
237 	ctl &= ~HOST_IRQ_EN;
238 	writel(ctl, mmio + HOST_CTL);
239 	readl(mmio + HOST_CTL); /* flush */
240 
241 	rc = ata_host_suspend(host, PMSG_SUSPEND);
242 	if (rc)
243 		return rc;
244 
245 	if (pdata && pdata->suspend)
246 		return pdata->suspend(dev);
247 	return 0;
248 }
249 
ahci_resume(struct device * dev)250 static int ahci_resume(struct device *dev)
251 {
252 	struct ahci_platform_data *pdata = dev_get_platdata(dev);
253 	struct ata_host *host = dev_get_drvdata(dev);
254 	int rc;
255 
256 	if (pdata && pdata->resume) {
257 		rc = pdata->resume(dev);
258 		if (rc)
259 			return rc;
260 	}
261 
262 	if (dev->power.power_state.event == PM_EVENT_SUSPEND) {
263 		rc = ahci_reset_controller(host);
264 		if (rc)
265 			return rc;
266 
267 		ahci_init_controller(host);
268 	}
269 
270 	ata_host_resume(host);
271 
272 	return 0;
273 }
274 
275 static struct dev_pm_ops ahci_pm_ops = {
276 	.suspend		= &ahci_suspend,
277 	.resume			= &ahci_resume,
278 };
279 #endif
280 
281 static const struct of_device_id ahci_of_match[] = {
282 	{ .compatible = "calxeda,hb-ahci", },
283 	{ .compatible = "snps,spear-ahci", },
284 	{},
285 };
286 MODULE_DEVICE_TABLE(of, ahci_of_match);
287 
288 static struct platform_driver ahci_driver = {
289 	.remove = __devexit_p(ahci_remove),
290 	.driver = {
291 		.name = "ahci",
292 		.owner = THIS_MODULE,
293 		.of_match_table = ahci_of_match,
294 #ifdef CONFIG_PM
295 		.pm = &ahci_pm_ops,
296 #endif
297 	},
298 	.id_table	= ahci_devtype,
299 };
300 
ahci_init(void)301 static int __init ahci_init(void)
302 {
303 	return platform_driver_probe(&ahci_driver, ahci_probe);
304 }
305 module_init(ahci_init);
306 
ahci_exit(void)307 static void __exit ahci_exit(void)
308 {
309 	platform_driver_unregister(&ahci_driver);
310 }
311 module_exit(ahci_exit);
312 
313 MODULE_DESCRIPTION("AHCI SATA platform driver");
314 MODULE_AUTHOR("Anton Vorontsov <avorontsov@ru.mvista.com>");
315 MODULE_LICENSE("GPL");
316 MODULE_ALIAS("platform:ahci");
317