1
2 /******************************************************************************
3 *
4 * Module Name: exprep - ACPI AML (p-code) execution - field prep utilities
5 *
6 *****************************************************************************/
7
8 /*
9 * Copyright (C) 2000 - 2012, Intel Corp.
10 * All rights reserved.
11 *
12 * Redistribution and use in source and binary forms, with or without
13 * modification, are permitted provided that the following conditions
14 * are met:
15 * 1. Redistributions of source code must retain the above copyright
16 * notice, this list of conditions, and the following disclaimer,
17 * without modification.
18 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
19 * substantially similar to the "NO WARRANTY" disclaimer below
20 * ("Disclaimer") and any redistribution must be conditioned upon
21 * including a substantially similar Disclaimer requirement for further
22 * binary redistribution.
23 * 3. Neither the names of the above-listed copyright holders nor the names
24 * of any contributors may be used to endorse or promote products derived
25 * from this software without specific prior written permission.
26 *
27 * Alternatively, this software may be distributed under the terms of the
28 * GNU General Public License ("GPL") version 2 as published by the Free
29 * Software Foundation.
30 *
31 * NO WARRANTY
32 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
33 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
34 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
35 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
36 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
37 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
38 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
39 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
40 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
41 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
42 * POSSIBILITY OF SUCH DAMAGES.
43 */
44
45 #include <acpi/acpi.h>
46 #include "accommon.h"
47 #include "acinterp.h"
48 #include "amlcode.h"
49 #include "acnamesp.h"
50 #include "acdispat.h"
51
52 #define _COMPONENT ACPI_EXECUTER
53 ACPI_MODULE_NAME("exprep")
54
55 /* Local prototypes */
56 static u32
57 acpi_ex_decode_field_access(union acpi_operand_object *obj_desc,
58 u8 field_flags, u32 * return_byte_alignment);
59
60 #ifdef ACPI_UNDER_DEVELOPMENT
61
62 static u32
63 acpi_ex_generate_access(u32 field_bit_offset,
64 u32 field_bit_length, u32 region_length);
65
66 /*******************************************************************************
67 *
68 * FUNCTION: acpi_ex_generate_access
69 *
70 * PARAMETERS: field_bit_offset - Start of field within parent region/buffer
71 * field_bit_length - Length of field in bits
72 * region_length - Length of parent in bytes
73 *
74 * RETURN: Field granularity (8, 16, 32 or 64) and
75 * byte_alignment (1, 2, 3, or 4)
76 *
77 * DESCRIPTION: Generate an optimal access width for fields defined with the
78 * any_acc keyword.
79 *
80 * NOTE: Need to have the region_length in order to check for boundary
81 * conditions (end-of-region). However, the region_length is a deferred
82 * operation. Therefore, to complete this implementation, the generation
83 * of this access width must be deferred until the region length has
84 * been evaluated.
85 *
86 ******************************************************************************/
87
88 static u32
acpi_ex_generate_access(u32 field_bit_offset,u32 field_bit_length,u32 region_length)89 acpi_ex_generate_access(u32 field_bit_offset,
90 u32 field_bit_length, u32 region_length)
91 {
92 u32 field_byte_length;
93 u32 field_byte_offset;
94 u32 field_byte_end_offset;
95 u32 access_byte_width;
96 u32 field_start_offset;
97 u32 field_end_offset;
98 u32 minimum_access_width = 0xFFFFFFFF;
99 u32 minimum_accesses = 0xFFFFFFFF;
100 u32 accesses;
101
102 ACPI_FUNCTION_TRACE(ex_generate_access);
103
104 /* Round Field start offset and length to "minimal" byte boundaries */
105
106 field_byte_offset = ACPI_DIV_8(ACPI_ROUND_DOWN(field_bit_offset, 8));
107 field_byte_end_offset = ACPI_DIV_8(ACPI_ROUND_UP(field_bit_length +
108 field_bit_offset, 8));
109 field_byte_length = field_byte_end_offset - field_byte_offset;
110
111 ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
112 "Bit length %u, Bit offset %u\n",
113 field_bit_length, field_bit_offset));
114
115 ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
116 "Byte Length %u, Byte Offset %u, End Offset %u\n",
117 field_byte_length, field_byte_offset,
118 field_byte_end_offset));
119
120 /*
121 * Iterative search for the maximum access width that is both aligned
122 * and does not go beyond the end of the region
123 *
124 * Start at byte_acc and work upwards to qword_acc max. (1,2,4,8 bytes)
125 */
126 for (access_byte_width = 1; access_byte_width <= 8;
127 access_byte_width <<= 1) {
128 /*
129 * 1) Round end offset up to next access boundary and make sure that
130 * this does not go beyond the end of the parent region.
131 * 2) When the Access width is greater than the field_byte_length, we
132 * are done. (This does not optimize for the perfectly aligned
133 * case yet).
134 */
135 if (ACPI_ROUND_UP(field_byte_end_offset, access_byte_width) <=
136 region_length) {
137 field_start_offset =
138 ACPI_ROUND_DOWN(field_byte_offset,
139 access_byte_width) /
140 access_byte_width;
141
142 field_end_offset =
143 ACPI_ROUND_UP((field_byte_length +
144 field_byte_offset),
145 access_byte_width) /
146 access_byte_width;
147
148 accesses = field_end_offset - field_start_offset;
149
150 ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
151 "AccessWidth %u end is within region\n",
152 access_byte_width));
153
154 ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
155 "Field Start %u, Field End %u -- requires %u accesses\n",
156 field_start_offset, field_end_offset,
157 accesses));
158
159 /* Single access is optimal */
160
161 if (accesses <= 1) {
162 ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
163 "Entire field can be accessed with one operation of size %u\n",
164 access_byte_width));
165 return_VALUE(access_byte_width);
166 }
167
168 /*
169 * Fits in the region, but requires more than one read/write.
170 * try the next wider access on next iteration
171 */
172 if (accesses < minimum_accesses) {
173 minimum_accesses = accesses;
174 minimum_access_width = access_byte_width;
175 }
176 } else {
177 ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
178 "AccessWidth %u end is NOT within region\n",
179 access_byte_width));
180 if (access_byte_width == 1) {
181 ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
182 "Field goes beyond end-of-region!\n"));
183
184 /* Field does not fit in the region at all */
185
186 return_VALUE(0);
187 }
188
189 /*
190 * This width goes beyond the end-of-region, back off to
191 * previous access
192 */
193 ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
194 "Backing off to previous optimal access width of %u\n",
195 minimum_access_width));
196 return_VALUE(minimum_access_width);
197 }
198 }
199
200 /*
201 * Could not read/write field with one operation,
202 * just use max access width
203 */
204 ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
205 "Cannot access field in one operation, using width 8\n"));
206 return_VALUE(8);
207 }
208 #endif /* ACPI_UNDER_DEVELOPMENT */
209
210 /*******************************************************************************
211 *
212 * FUNCTION: acpi_ex_decode_field_access
213 *
214 * PARAMETERS: obj_desc - Field object
215 * field_flags - Encoded fieldflags (contains access bits)
216 * return_byte_alignment - Where the byte alignment is returned
217 *
218 * RETURN: Field granularity (8, 16, 32 or 64) and
219 * byte_alignment (1, 2, 3, or 4)
220 *
221 * DESCRIPTION: Decode the access_type bits of a field definition.
222 *
223 ******************************************************************************/
224
225 static u32
acpi_ex_decode_field_access(union acpi_operand_object * obj_desc,u8 field_flags,u32 * return_byte_alignment)226 acpi_ex_decode_field_access(union acpi_operand_object *obj_desc,
227 u8 field_flags, u32 * return_byte_alignment)
228 {
229 u32 access;
230 u32 byte_alignment;
231 u32 bit_length;
232
233 ACPI_FUNCTION_TRACE(ex_decode_field_access);
234
235 access = (field_flags & AML_FIELD_ACCESS_TYPE_MASK);
236
237 switch (access) {
238 case AML_FIELD_ACCESS_ANY:
239
240 #ifdef ACPI_UNDER_DEVELOPMENT
241 byte_alignment =
242 acpi_ex_generate_access(obj_desc->common_field.
243 start_field_bit_offset,
244 obj_desc->common_field.bit_length,
245 0xFFFFFFFF
246 /* Temp until we pass region_length as parameter */
247 );
248 bit_length = byte_alignment * 8;
249 #endif
250
251 byte_alignment = 1;
252 bit_length = 8;
253 break;
254
255 case AML_FIELD_ACCESS_BYTE:
256 case AML_FIELD_ACCESS_BUFFER: /* ACPI 2.0 (SMBus Buffer) */
257 byte_alignment = 1;
258 bit_length = 8;
259 break;
260
261 case AML_FIELD_ACCESS_WORD:
262 byte_alignment = 2;
263 bit_length = 16;
264 break;
265
266 case AML_FIELD_ACCESS_DWORD:
267 byte_alignment = 4;
268 bit_length = 32;
269 break;
270
271 case AML_FIELD_ACCESS_QWORD: /* ACPI 2.0 */
272 byte_alignment = 8;
273 bit_length = 64;
274 break;
275
276 default:
277 /* Invalid field access type */
278
279 ACPI_ERROR((AE_INFO, "Unknown field access type 0x%X", access));
280 return_UINT32(0);
281 }
282
283 if (obj_desc->common.type == ACPI_TYPE_BUFFER_FIELD) {
284 /*
285 * buffer_field access can be on any byte boundary, so the
286 * byte_alignment is always 1 byte -- regardless of any byte_alignment
287 * implied by the field access type.
288 */
289 byte_alignment = 1;
290 }
291
292 *return_byte_alignment = byte_alignment;
293 return_UINT32(bit_length);
294 }
295
296 /*******************************************************************************
297 *
298 * FUNCTION: acpi_ex_prep_common_field_object
299 *
300 * PARAMETERS: obj_desc - The field object
301 * field_flags - Access, lock_rule, and update_rule.
302 * The format of a field_flag is described
303 * in the ACPI specification
304 * field_attribute - Special attributes (not used)
305 * field_bit_position - Field start position
306 * field_bit_length - Field length in number of bits
307 *
308 * RETURN: Status
309 *
310 * DESCRIPTION: Initialize the areas of the field object that are common
311 * to the various types of fields. Note: This is very "sensitive"
312 * code because we are solving the general case for field
313 * alignment.
314 *
315 ******************************************************************************/
316
317 acpi_status
acpi_ex_prep_common_field_object(union acpi_operand_object * obj_desc,u8 field_flags,u8 field_attribute,u32 field_bit_position,u32 field_bit_length)318 acpi_ex_prep_common_field_object(union acpi_operand_object *obj_desc,
319 u8 field_flags,
320 u8 field_attribute,
321 u32 field_bit_position, u32 field_bit_length)
322 {
323 u32 access_bit_width;
324 u32 byte_alignment;
325 u32 nearest_byte_address;
326
327 ACPI_FUNCTION_TRACE(ex_prep_common_field_object);
328
329 /*
330 * Note: the structure being initialized is the
331 * ACPI_COMMON_FIELD_INFO; No structure fields outside of the common
332 * area are initialized by this procedure.
333 */
334 obj_desc->common_field.field_flags = field_flags;
335 obj_desc->common_field.attribute = field_attribute;
336 obj_desc->common_field.bit_length = field_bit_length;
337
338 /*
339 * Decode the access type so we can compute offsets. The access type gives
340 * two pieces of information - the width of each field access and the
341 * necessary byte_alignment (address granularity) of the access.
342 *
343 * For any_acc, the access_bit_width is the largest width that is both
344 * necessary and possible in an attempt to access the whole field in one
345 * I/O operation. However, for any_acc, the byte_alignment is always one
346 * byte.
347 *
348 * For all Buffer Fields, the byte_alignment is always one byte.
349 *
350 * For all other access types (Byte, Word, Dword, Qword), the Bitwidth is
351 * the same (equivalent) as the byte_alignment.
352 */
353 access_bit_width = acpi_ex_decode_field_access(obj_desc, field_flags,
354 &byte_alignment);
355 if (!access_bit_width) {
356 return_ACPI_STATUS(AE_AML_OPERAND_VALUE);
357 }
358
359 /* Setup width (access granularity) fields (values are: 1, 2, 4, 8) */
360
361 obj_desc->common_field.access_byte_width = (u8)
362 ACPI_DIV_8(access_bit_width);
363
364 /*
365 * base_byte_offset is the address of the start of the field within the
366 * region. It is the byte address of the first *datum* (field-width data
367 * unit) of the field. (i.e., the first datum that contains at least the
368 * first *bit* of the field.)
369 *
370 * Note: byte_alignment is always either equal to the access_bit_width or 8
371 * (Byte access), and it defines the addressing granularity of the parent
372 * region or buffer.
373 */
374 nearest_byte_address =
375 ACPI_ROUND_BITS_DOWN_TO_BYTES(field_bit_position);
376 obj_desc->common_field.base_byte_offset = (u32)
377 ACPI_ROUND_DOWN(nearest_byte_address, byte_alignment);
378
379 /*
380 * start_field_bit_offset is the offset of the first bit of the field within
381 * a field datum.
382 */
383 obj_desc->common_field.start_field_bit_offset = (u8)
384 (field_bit_position -
385 ACPI_MUL_8(obj_desc->common_field.base_byte_offset));
386
387 return_ACPI_STATUS(AE_OK);
388 }
389
390 /*******************************************************************************
391 *
392 * FUNCTION: acpi_ex_prep_field_value
393 *
394 * PARAMETERS: Info - Contains all field creation info
395 *
396 * RETURN: Status
397 *
398 * DESCRIPTION: Construct a union acpi_operand_object of type def_field and
399 * connect it to the parent Node.
400 *
401 ******************************************************************************/
402
acpi_ex_prep_field_value(struct acpi_create_field_info * info)403 acpi_status acpi_ex_prep_field_value(struct acpi_create_field_info *info)
404 {
405 union acpi_operand_object *obj_desc;
406 union acpi_operand_object *second_desc = NULL;
407 acpi_status status;
408 u32 access_byte_width;
409 u32 type;
410
411 ACPI_FUNCTION_TRACE(ex_prep_field_value);
412
413 /* Parameter validation */
414
415 if (info->field_type != ACPI_TYPE_LOCAL_INDEX_FIELD) {
416 if (!info->region_node) {
417 ACPI_ERROR((AE_INFO, "Null RegionNode"));
418 return_ACPI_STATUS(AE_AML_NO_OPERAND);
419 }
420
421 type = acpi_ns_get_type(info->region_node);
422 if (type != ACPI_TYPE_REGION) {
423 ACPI_ERROR((AE_INFO,
424 "Needed Region, found type 0x%X (%s)", type,
425 acpi_ut_get_type_name(type)));
426
427 return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
428 }
429 }
430
431 /* Allocate a new field object */
432
433 obj_desc = acpi_ut_create_internal_object(info->field_type);
434 if (!obj_desc) {
435 return_ACPI_STATUS(AE_NO_MEMORY);
436 }
437
438 /* Initialize areas of the object that are common to all fields */
439
440 obj_desc->common_field.node = info->field_node;
441 status = acpi_ex_prep_common_field_object(obj_desc,
442 info->field_flags,
443 info->attribute,
444 info->field_bit_position,
445 info->field_bit_length);
446 if (ACPI_FAILURE(status)) {
447 acpi_ut_delete_object_desc(obj_desc);
448 return_ACPI_STATUS(status);
449 }
450
451 /* Initialize areas of the object that are specific to the field type */
452
453 switch (info->field_type) {
454 case ACPI_TYPE_LOCAL_REGION_FIELD:
455
456 obj_desc->field.region_obj =
457 acpi_ns_get_attached_object(info->region_node);
458
459 /* Fields specific to generic_serial_bus fields */
460
461 obj_desc->field.access_length = info->access_length;
462
463 if (info->connection_node) {
464 second_desc = info->connection_node->object;
465 if (!(second_desc->common.flags & AOPOBJ_DATA_VALID)) {
466 status =
467 acpi_ds_get_buffer_arguments(second_desc);
468 if (ACPI_FAILURE(status)) {
469 acpi_ut_delete_object_desc(obj_desc);
470 return_ACPI_STATUS(status);
471 }
472 }
473
474 obj_desc->field.resource_buffer =
475 second_desc->buffer.pointer;
476 obj_desc->field.resource_length =
477 (u16)second_desc->buffer.length;
478 } else if (info->resource_buffer) {
479 obj_desc->field.resource_buffer = info->resource_buffer;
480 obj_desc->field.resource_length = info->resource_length;
481 }
482
483 /* Allow full data read from EC address space */
484
485 if ((obj_desc->field.region_obj->region.space_id ==
486 ACPI_ADR_SPACE_EC)
487 && (obj_desc->common_field.bit_length > 8)) {
488 access_byte_width =
489 ACPI_ROUND_BITS_UP_TO_BYTES(obj_desc->common_field.
490 bit_length);
491
492 /* Maximum byte width supported is 255 */
493
494 if (access_byte_width < 256) {
495 obj_desc->common_field.access_byte_width =
496 (u8)access_byte_width;
497 }
498 }
499 /* An additional reference for the container */
500
501 acpi_ut_add_reference(obj_desc->field.region_obj);
502
503 ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
504 "RegionField: BitOff %X, Off %X, Gran %X, Region %p\n",
505 obj_desc->field.start_field_bit_offset,
506 obj_desc->field.base_byte_offset,
507 obj_desc->field.access_byte_width,
508 obj_desc->field.region_obj));
509 break;
510
511 case ACPI_TYPE_LOCAL_BANK_FIELD:
512
513 obj_desc->bank_field.value = info->bank_value;
514 obj_desc->bank_field.region_obj =
515 acpi_ns_get_attached_object(info->region_node);
516 obj_desc->bank_field.bank_obj =
517 acpi_ns_get_attached_object(info->register_node);
518
519 /* An additional reference for the attached objects */
520
521 acpi_ut_add_reference(obj_desc->bank_field.region_obj);
522 acpi_ut_add_reference(obj_desc->bank_field.bank_obj);
523
524 ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
525 "Bank Field: BitOff %X, Off %X, Gran %X, Region %p, BankReg %p\n",
526 obj_desc->bank_field.start_field_bit_offset,
527 obj_desc->bank_field.base_byte_offset,
528 obj_desc->field.access_byte_width,
529 obj_desc->bank_field.region_obj,
530 obj_desc->bank_field.bank_obj));
531
532 /*
533 * Remember location in AML stream of the field unit
534 * opcode and operands -- since the bank_value
535 * operands must be evaluated.
536 */
537 second_desc = obj_desc->common.next_object;
538 second_desc->extra.aml_start =
539 ACPI_CAST_PTR(union acpi_parse_object,
540 info->data_register_node)->named.data;
541 second_desc->extra.aml_length =
542 ACPI_CAST_PTR(union acpi_parse_object,
543 info->data_register_node)->named.length;
544
545 break;
546
547 case ACPI_TYPE_LOCAL_INDEX_FIELD:
548
549 /* Get the Index and Data registers */
550
551 obj_desc->index_field.index_obj =
552 acpi_ns_get_attached_object(info->register_node);
553 obj_desc->index_field.data_obj =
554 acpi_ns_get_attached_object(info->data_register_node);
555
556 if (!obj_desc->index_field.data_obj
557 || !obj_desc->index_field.index_obj) {
558 ACPI_ERROR((AE_INFO,
559 "Null Index Object during field prep"));
560 acpi_ut_delete_object_desc(obj_desc);
561 return_ACPI_STATUS(AE_AML_INTERNAL);
562 }
563
564 /* An additional reference for the attached objects */
565
566 acpi_ut_add_reference(obj_desc->index_field.data_obj);
567 acpi_ut_add_reference(obj_desc->index_field.index_obj);
568
569 /*
570 * April 2006: Changed to match MS behavior
571 *
572 * The value written to the Index register is the byte offset of the
573 * target field in units of the granularity of the index_field
574 *
575 * Previously, the value was calculated as an index in terms of the
576 * width of the Data register, as below:
577 *
578 * obj_desc->index_field.Value = (u32)
579 * (Info->field_bit_position / ACPI_MUL_8 (
580 * obj_desc->Field.access_byte_width));
581 *
582 * February 2006: Tried value as a byte offset:
583 * obj_desc->index_field.Value = (u32)
584 * ACPI_DIV_8 (Info->field_bit_position);
585 */
586 obj_desc->index_field.value =
587 (u32) ACPI_ROUND_DOWN(ACPI_DIV_8(info->field_bit_position),
588 obj_desc->index_field.
589 access_byte_width);
590
591 ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
592 "IndexField: BitOff %X, Off %X, Value %X, Gran %X, Index %p, Data %p\n",
593 obj_desc->index_field.start_field_bit_offset,
594 obj_desc->index_field.base_byte_offset,
595 obj_desc->index_field.value,
596 obj_desc->field.access_byte_width,
597 obj_desc->index_field.index_obj,
598 obj_desc->index_field.data_obj));
599 break;
600
601 default:
602 /* No other types should get here */
603 break;
604 }
605
606 /*
607 * Store the constructed descriptor (obj_desc) into the parent Node,
608 * preserving the current type of that named_obj.
609 */
610 status = acpi_ns_attach_object(info->field_node, obj_desc,
611 acpi_ns_get_type(info->field_node));
612
613 ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
614 "Set NamedObj %p [%4.4s], ObjDesc %p\n",
615 info->field_node,
616 acpi_ut_get_node_name(info->field_node), obj_desc));
617
618 /* Remove local reference to the object */
619
620 acpi_ut_remove_reference(obj_desc);
621 return_ACPI_STATUS(status);
622 }
623