1 /* pci-vdk.c: MB93090-MB00 (VDK) PCI support
2 *
3 * Copyright (C) 2003, 2004 Red Hat, Inc. All Rights Reserved.
4 * Written by David Howells (dhowells@redhat.com)
5 *
6 * This program is free software; you can redistribute it and/or
7 * modify it under the terms of the GNU General Public License
8 * as published by the Free Software Foundation; either version
9 * 2 of the License, or (at your option) any later version.
10 */
11
12 #include <linux/types.h>
13 #include <linux/kernel.h>
14 #include <linux/sched.h>
15 #include <linux/pci.h>
16 #include <linux/init.h>
17 #include <linux/ioport.h>
18 #include <linux/delay.h>
19
20 #include <asm/segment.h>
21 #include <asm/io.h>
22 #include <asm/mb-regs.h>
23 #include <asm/mb86943a.h>
24 #include "pci-frv.h"
25
26 unsigned int __nongpreldata pci_probe = 1;
27
28 int __nongpreldata pcibios_last_bus = -1;
29 struct pci_bus *__nongpreldata pci_root_bus;
30 struct pci_ops *__nongpreldata pci_root_ops;
31
32 /*
33 * The accessible PCI window does not cover the entire CPU address space, but
34 * there are devices we want to access outside of that window, so we need to
35 * insert specific PCI bus resources instead of using the platform-level bus
36 * resources directly for the PCI root bus.
37 *
38 * These are configured and inserted by pcibios_init() and are attached to the
39 * root bus by pcibios_fixup_bus().
40 */
41 static struct resource pci_ioport_resource = {
42 .name = "PCI IO",
43 .start = 0,
44 .end = IO_SPACE_LIMIT,
45 .flags = IORESOURCE_IO,
46 };
47
48 static struct resource pci_iomem_resource = {
49 .name = "PCI mem",
50 .start = 0,
51 .end = -1,
52 .flags = IORESOURCE_MEM,
53 };
54
55 /*
56 * Functions for accessing PCI configuration space
57 */
58
59 #define CONFIG_CMD(bus, dev, where) \
60 (0x80000000 | (bus->number << 16) | (devfn << 8) | (where & ~3))
61
62 #define __set_PciCfgAddr(A) writel((A), (volatile void __iomem *) __region_CS1 + 0x80)
63
64 #define __get_PciCfgDataB(A) readb((volatile void __iomem *) __region_CS1 + 0x88 + ((A) & 3))
65 #define __get_PciCfgDataW(A) readw((volatile void __iomem *) __region_CS1 + 0x88 + ((A) & 2))
66 #define __get_PciCfgDataL(A) readl((volatile void __iomem *) __region_CS1 + 0x88)
67
68 #define __set_PciCfgDataB(A,V) \
69 writeb((V), (volatile void __iomem *) __region_CS1 + 0x88 + (3 - ((A) & 3)))
70
71 #define __set_PciCfgDataW(A,V) \
72 writew((V), (volatile void __iomem *) __region_CS1 + 0x88 + (2 - ((A) & 2)))
73
74 #define __set_PciCfgDataL(A,V) \
75 writel((V), (volatile void __iomem *) __region_CS1 + 0x88)
76
77 #define __get_PciBridgeDataB(A) readb((volatile void __iomem *) __region_CS1 + 0x800 + (A))
78 #define __get_PciBridgeDataW(A) readw((volatile void __iomem *) __region_CS1 + 0x800 + (A))
79 #define __get_PciBridgeDataL(A) readl((volatile void __iomem *) __region_CS1 + 0x800 + (A))
80
81 #define __set_PciBridgeDataB(A,V) writeb((V), (volatile void __iomem *) __region_CS1 + 0x800 + (A))
82 #define __set_PciBridgeDataW(A,V) writew((V), (volatile void __iomem *) __region_CS1 + 0x800 + (A))
83 #define __set_PciBridgeDataL(A,V) writel((V), (volatile void __iomem *) __region_CS1 + 0x800 + (A))
84
__query(const struct pci_dev * dev)85 static inline int __query(const struct pci_dev *dev)
86 {
87 // return dev->bus->number==0 && (dev->devfn==PCI_DEVFN(0,0));
88 // return dev->bus->number==1;
89 // return dev->bus->number==0 &&
90 // (dev->devfn==PCI_DEVFN(2,0) || dev->devfn==PCI_DEVFN(3,0));
91 return 0;
92 }
93
94 /*****************************************************************************/
95 /*
96 *
97 */
pci_frv_read_config(struct pci_bus * bus,unsigned int devfn,int where,int size,u32 * val)98 static int pci_frv_read_config(struct pci_bus *bus, unsigned int devfn, int where, int size,
99 u32 *val)
100 {
101 u32 _value;
102
103 if (bus->number == 0 && devfn == PCI_DEVFN(0, 0)) {
104 _value = __get_PciBridgeDataL(where & ~3);
105 }
106 else {
107 __set_PciCfgAddr(CONFIG_CMD(bus, devfn, where));
108 _value = __get_PciCfgDataL(where & ~3);
109 }
110
111 switch (size) {
112 case 1:
113 _value = _value >> ((where & 3) * 8);
114 break;
115
116 case 2:
117 _value = _value >> ((where & 2) * 8);
118 break;
119
120 case 4:
121 break;
122
123 default:
124 BUG();
125 }
126
127 *val = _value;
128 return PCIBIOS_SUCCESSFUL;
129 }
130
pci_frv_write_config(struct pci_bus * bus,unsigned int devfn,int where,int size,u32 value)131 static int pci_frv_write_config(struct pci_bus *bus, unsigned int devfn, int where, int size,
132 u32 value)
133 {
134 switch (size) {
135 case 1:
136 if (bus->number == 0 && devfn == PCI_DEVFN(0, 0)) {
137 __set_PciBridgeDataB(where, value);
138 }
139 else {
140 __set_PciCfgAddr(CONFIG_CMD(bus, devfn, where));
141 __set_PciCfgDataB(where, value);
142 }
143 break;
144
145 case 2:
146 if (bus->number == 0 && devfn == PCI_DEVFN(0, 0)) {
147 __set_PciBridgeDataW(where, value);
148 }
149 else {
150 __set_PciCfgAddr(CONFIG_CMD(bus, devfn, where));
151 __set_PciCfgDataW(where, value);
152 }
153 break;
154
155 case 4:
156 if (bus->number == 0 && devfn == PCI_DEVFN(0, 0)) {
157 __set_PciBridgeDataL(where, value);
158 }
159 else {
160 __set_PciCfgAddr(CONFIG_CMD(bus, devfn, where));
161 __set_PciCfgDataL(where, value);
162 }
163 break;
164
165 default:
166 BUG();
167 }
168
169 return PCIBIOS_SUCCESSFUL;
170 }
171
172 static struct pci_ops pci_direct_frv = {
173 pci_frv_read_config,
174 pci_frv_write_config,
175 };
176
177 /*
178 * Before we decide to use direct hardware access mechanisms, we try to do some
179 * trivial checks to ensure it at least _seems_ to be working -- we just test
180 * whether bus 00 contains a host bridge (this is similar to checking
181 * techniques used in XFree86, but ours should be more reliable since we
182 * attempt to make use of direct access hints provided by the PCI BIOS).
183 *
184 * This should be close to trivial, but it isn't, because there are buggy
185 * chipsets (yes, you guessed it, by Intel and Compaq) that have no class ID.
186 */
pci_sanity_check(struct pci_ops * o)187 static int __init pci_sanity_check(struct pci_ops *o)
188 {
189 struct pci_bus bus; /* Fake bus and device */
190 u32 id;
191
192 bus.number = 0;
193
194 if (o->read(&bus, 0, PCI_VENDOR_ID, 4, &id) == PCIBIOS_SUCCESSFUL) {
195 printk("PCI: VDK Bridge device:vendor: %08x\n", id);
196 if (id == 0x200e10cf)
197 return 1;
198 }
199
200 printk("PCI: VDK Bridge: Sanity check failed\n");
201 return 0;
202 }
203
pci_check_direct(void)204 static struct pci_ops * __init pci_check_direct(void)
205 {
206 unsigned long flags;
207
208 local_irq_save(flags);
209
210 /* check if access works */
211 if (pci_sanity_check(&pci_direct_frv)) {
212 local_irq_restore(flags);
213 printk("PCI: Using configuration frv\n");
214 // request_mem_region(0xBE040000, 256, "FRV bridge");
215 // request_mem_region(0xBFFFFFF4, 12, "PCI frv");
216 return &pci_direct_frv;
217 }
218
219 local_irq_restore(flags);
220 return NULL;
221 }
222
223 /*
224 * Discover remaining PCI buses in case there are peer host bridges.
225 * We use the number of last PCI bus provided by the PCI BIOS.
226 */
pcibios_fixup_peer_bridges(void)227 static void __init pcibios_fixup_peer_bridges(void)
228 {
229 struct pci_bus bus;
230 struct pci_dev dev;
231 int n;
232 u16 l;
233
234 if (pcibios_last_bus <= 0 || pcibios_last_bus >= 0xff)
235 return;
236 printk("PCI: Peer bridge fixup\n");
237 for (n=0; n <= pcibios_last_bus; n++) {
238 if (pci_find_bus(0, n))
239 continue;
240 bus.number = n;
241 bus.ops = pci_root_ops;
242 dev.bus = &bus;
243 for(dev.devfn=0; dev.devfn<256; dev.devfn += 8)
244 if (!pci_read_config_word(&dev, PCI_VENDOR_ID, &l) &&
245 l != 0x0000 && l != 0xffff) {
246 printk("Found device at %02x:%02x [%04x]\n", n, dev.devfn, l);
247 printk("PCI: Discovered peer bus %02x\n", n);
248 pci_scan_bus(n, pci_root_ops, NULL);
249 break;
250 }
251 }
252 }
253
254 /*
255 * Exceptions for specific devices. Usually work-arounds for fatal design flaws.
256 */
257
pci_fixup_umc_ide(struct pci_dev * d)258 static void __init pci_fixup_umc_ide(struct pci_dev *d)
259 {
260 /*
261 * UM8886BF IDE controller sets region type bits incorrectly,
262 * therefore they look like memory despite of them being I/O.
263 */
264 int i;
265
266 printk("PCI: Fixing base address flags for device %s\n", pci_name(d));
267 for(i=0; i<4; i++)
268 d->resource[i].flags |= PCI_BASE_ADDRESS_SPACE_IO;
269 }
270
pci_fixup_ide_bases(struct pci_dev * d)271 static void __init pci_fixup_ide_bases(struct pci_dev *d)
272 {
273 int i;
274
275 /*
276 * PCI IDE controllers use non-standard I/O port decoding, respect it.
277 */
278 if ((d->class >> 8) != PCI_CLASS_STORAGE_IDE)
279 return;
280 printk("PCI: IDE base address fixup for %s\n", pci_name(d));
281 for(i=0; i<4; i++) {
282 struct resource *r = &d->resource[i];
283 if ((r->start & ~0x80) == 0x374) {
284 r->start |= 2;
285 r->end = r->start;
286 }
287 }
288 }
289
pci_fixup_ide_trash(struct pci_dev * d)290 static void __init pci_fixup_ide_trash(struct pci_dev *d)
291 {
292 int i;
293
294 /*
295 * There exist PCI IDE controllers which have utter garbage
296 * in first four base registers. Ignore that.
297 */
298 printk("PCI: IDE base address trash cleared for %s\n", pci_name(d));
299 for(i=0; i<4; i++)
300 d->resource[i].start = d->resource[i].end = d->resource[i].flags = 0;
301 }
302
pci_fixup_latency(struct pci_dev * d)303 static void __devinit pci_fixup_latency(struct pci_dev *d)
304 {
305 /*
306 * SiS 5597 and 5598 chipsets require latency timer set to
307 * at most 32 to avoid lockups.
308 */
309 DBG("PCI: Setting max latency to 32\n");
310 pcibios_max_latency = 32;
311 }
312
313 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_UMC, PCI_DEVICE_ID_UMC_UM8886BF, pci_fixup_umc_ide);
314 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_5513, pci_fixup_ide_trash);
315 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_5597, pci_fixup_latency);
316 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_5598, pci_fixup_latency);
317 DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_ide_bases);
318
319 /*
320 * Called after each bus is probed, but before its children
321 * are examined.
322 */
323
pcibios_fixup_bus(struct pci_bus * bus)324 void __init pcibios_fixup_bus(struct pci_bus *bus)
325 {
326 #if 0
327 printk("### PCIBIOS_FIXUP_BUS(%d)\n",bus->number);
328 #endif
329
330 pci_read_bridge_bases(bus);
331
332 if (bus->number == 0) {
333 struct list_head *ln;
334 struct pci_dev *dev;
335 for (ln=bus->devices.next; ln != &bus->devices; ln=ln->next) {
336 dev = pci_dev_b(ln);
337 if (dev->devfn == 0) {
338 dev->resource[0].start = 0;
339 dev->resource[0].end = 0;
340 }
341 }
342 }
343 }
344
345 /*
346 * Initialization. Try all known PCI access methods. Note that we support
347 * using both PCI BIOS and direct access: in such cases, we use I/O ports
348 * to access config space, but we still keep BIOS order of cards to be
349 * compatible with 2.0.X. This should go away some day.
350 */
351
pcibios_init(void)352 int __init pcibios_init(void)
353 {
354 struct pci_ops *dir = NULL;
355 LIST_HEAD(resources);
356
357 if (!mb93090_mb00_detected)
358 return -ENXIO;
359
360 __reg_MB86943_sl_ctl |= MB86943_SL_CTL_DRCT_MASTER_SWAP | MB86943_SL_CTL_DRCT_SLAVE_SWAP;
361
362 __reg_MB86943_ecs_base(1) = ((__region_CS2 + 0x01000000) >> 9) | 0x08000000;
363 __reg_MB86943_ecs_base(2) = ((__region_CS2 + 0x00000000) >> 9) | 0x08000000;
364
365 *(volatile uint32_t *) (__region_CS1 + 0x848) = 0xe0000000;
366 *(volatile uint32_t *) (__region_CS1 + 0x8b8) = 0x00000000;
367
368 __reg_MB86943_sl_pci_io_base = (__region_CS2 + 0x04000000) >> 9;
369 __reg_MB86943_sl_pci_mem_base = (__region_CS2 + 0x08000000) >> 9;
370 __reg_MB86943_pci_sl_io_base = __region_CS2 + 0x04000000;
371 __reg_MB86943_pci_sl_mem_base = __region_CS2 + 0x08000000;
372 mb();
373
374 /* enable PCI arbitration */
375 __reg_MB86943_pci_arbiter = MB86943_PCIARB_EN;
376
377 pci_ioport_resource.start = (__reg_MB86943_sl_pci_io_base << 9) & 0xfffffc00;
378 pci_ioport_resource.end = (__reg_MB86943_sl_pci_io_range << 9) | 0x3ff;
379 pci_ioport_resource.end += pci_ioport_resource.start;
380
381 printk("PCI IO window: %08llx-%08llx\n",
382 (unsigned long long) pci_ioport_resource.start,
383 (unsigned long long) pci_ioport_resource.end);
384
385 pci_iomem_resource.start = (__reg_MB86943_sl_pci_mem_base << 9) & 0xfffffc00;
386 pci_iomem_resource.end = (__reg_MB86943_sl_pci_mem_range << 9) | 0x3ff;
387 pci_iomem_resource.end += pci_iomem_resource.start;
388
389 /* Reserve somewhere to write to flush posted writes. This is used by
390 * __flush_PCI_writes() from asm/io.h to force the write FIFO in the
391 * CPU-PCI bridge to flush as this doesn't happen automatically when a
392 * read is performed on the MB93090 development kit motherboard.
393 */
394 pci_iomem_resource.start += 0x400;
395
396 printk("PCI MEM window: %08llx-%08llx\n",
397 (unsigned long long) pci_iomem_resource.start,
398 (unsigned long long) pci_iomem_resource.end);
399 printk("PCI DMA memory: %08lx-%08lx\n",
400 dma_coherent_mem_start, dma_coherent_mem_end);
401
402 if (insert_resource(&iomem_resource, &pci_iomem_resource) < 0)
403 panic("Unable to insert PCI IOMEM resource\n");
404 if (insert_resource(&ioport_resource, &pci_ioport_resource) < 0)
405 panic("Unable to insert PCI IOPORT resource\n");
406
407 if (!pci_probe)
408 return -ENXIO;
409
410 dir = pci_check_direct();
411 if (dir)
412 pci_root_ops = dir;
413 else {
414 printk("PCI: No PCI bus detected\n");
415 return -ENXIO;
416 }
417
418 printk("PCI: Probing PCI hardware\n");
419 pci_add_resource(&resources, &pci_ioport_resource);
420 pci_add_resource(&resources, &pci_iomem_resource);
421 pci_root_bus = pci_scan_root_bus(NULL, 0, pci_root_ops, NULL,
422 &resources);
423
424 pcibios_irq_init();
425 pcibios_fixup_peer_bridges();
426 pcibios_fixup_irqs();
427 pcibios_resource_survey();
428
429 return 0;
430 }
431
432 arch_initcall(pcibios_init);
433
pcibios_setup(char * str)434 char * __init pcibios_setup(char *str)
435 {
436 if (!strcmp(str, "off")) {
437 pci_probe = 0;
438 return NULL;
439 } else if (!strncmp(str, "lastbus=", 8)) {
440 pcibios_last_bus = simple_strtol(str+8, NULL, 0);
441 return NULL;
442 }
443 return str;
444 }
445
pcibios_enable_device(struct pci_dev * dev,int mask)446 int pcibios_enable_device(struct pci_dev *dev, int mask)
447 {
448 int err;
449
450 if ((err = pci_enable_resources(dev, mask)) < 0)
451 return err;
452 if (!dev->msi_enabled)
453 pcibios_enable_irq(dev);
454 return 0;
455 }
456