1 /*
2 * linux/arch/arm/mach-omap1/board-h3-mmc.c
3 *
4 * Copyright (C) 2007 Instituto Nokia de Tecnologia - INdT
5 * Author: Felipe Balbi <felipe.lima@indt.org.br>
6 *
7 * This code is based on linux/arch/arm/mach-omap2/board-n800-mmc.c, which is:
8 * Copyright (C) 2006 Nokia Corporation
9 *
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License version 2 as
12 * published by the Free Software Foundation.
13 */
14 #include <linux/gpio.h>
15 #include <linux/platform_device.h>
16
17 #include <linux/i2c/tps65010.h>
18
19 #include <plat/mmc.h>
20
21 #include "board-h3.h"
22
23 #if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
24
mmc_set_power(struct device * dev,int slot,int power_on,int vdd)25 static int mmc_set_power(struct device *dev, int slot, int power_on,
26 int vdd)
27 {
28 gpio_set_value(H3_TPS_GPIO_MMC_PWR_EN, power_on);
29 return 0;
30 }
31
32 /*
33 * H3 could use the following functions tested:
34 * - mmc_get_cover_state that uses OMAP_MPUIO(1)
35 * - mmc_get_wp that maybe uses OMAP_MPUIO(3)
36 */
37 static struct omap_mmc_platform_data mmc1_data = {
38 .nr_slots = 1,
39 .dma_mask = 0xffffffff,
40 .slots[0] = {
41 .set_power = mmc_set_power,
42 .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
43 .name = "mmcblk",
44 },
45 };
46
47 static struct omap_mmc_platform_data *mmc_data[OMAP16XX_NR_MMC];
48
h3_mmc_init(void)49 void __init h3_mmc_init(void)
50 {
51 int ret;
52
53 ret = gpio_request(H3_TPS_GPIO_MMC_PWR_EN, "MMC power");
54 if (ret < 0)
55 return;
56 gpio_direction_output(H3_TPS_GPIO_MMC_PWR_EN, 0);
57
58 mmc_data[0] = &mmc1_data;
59 omap1_init_mmc(mmc_data, OMAP16XX_NR_MMC);
60 }
61
62 #else
63
h3_mmc_init(void)64 void __init h3_mmc_init(void)
65 {
66 }
67
68 #endif
69