1 /*
2 * arch/arm/mach-ixp2000/ixdp2x01.c
3 *
4 * Code common to Intel IXDP2401 and IXDP2801 platforms
5 *
6 * Original Author: Andrzej Mialkowski <andrzej.mialkowski@intel.com>
7 * Maintainer: Deepak Saxena <dsaxena@plexity.net>
8 *
9 * Copyright (C) 2002-2003 Intel Corp.
10 * Copyright (C) 2003-2004 MontaVista Software, Inc.
11 *
12 * This program is free software; you can redistribute it and/or modify it
13 * under the terms of the GNU General Public License as published by the
14 * Free Software Foundation; either version 2 of the License, or (at your
15 * option) any later version.
16 */
17
18 #include <linux/kernel.h>
19 #include <linux/init.h>
20 #include <linux/mm.h>
21 #include <linux/sched.h>
22 #include <linux/interrupt.h>
23 #include <linux/bitops.h>
24 #include <linux/pci.h>
25 #include <linux/ioport.h>
26 #include <linux/delay.h>
27 #include <linux/serial.h>
28 #include <linux/tty.h>
29 #include <linux/serial_core.h>
30 #include <linux/platform_device.h>
31 #include <linux/serial_8250.h>
32 #include <linux/io.h>
33
34 #include <asm/irq.h>
35 #include <asm/pgtable.h>
36 #include <asm/page.h>
37 #include <mach/hardware.h>
38 #include <asm/mach-types.h>
39
40 #include <asm/mach/pci.h>
41 #include <asm/mach/map.h>
42 #include <asm/mach/irq.h>
43 #include <asm/mach/time.h>
44 #include <asm/mach/arch.h>
45 #include <asm/mach/flash.h>
46
47 /*************************************************************************
48 * IXDP2x01 IRQ Handling
49 *************************************************************************/
ixdp2x01_irq_mask(struct irq_data * d)50 static void ixdp2x01_irq_mask(struct irq_data *d)
51 {
52 ixp2000_reg_wrb(IXDP2X01_INT_MASK_SET_REG,
53 IXP2000_BOARD_IRQ_MASK(d->irq));
54 }
55
ixdp2x01_irq_unmask(struct irq_data * d)56 static void ixdp2x01_irq_unmask(struct irq_data *d)
57 {
58 ixp2000_reg_write(IXDP2X01_INT_MASK_CLR_REG,
59 IXP2000_BOARD_IRQ_MASK(d->irq));
60 }
61
62 static u32 valid_irq_mask;
63
ixdp2x01_irq_handler(unsigned int irq,struct irq_desc * desc)64 static void ixdp2x01_irq_handler(unsigned int irq, struct irq_desc *desc)
65 {
66 u32 ex_interrupt;
67 int i;
68
69 desc->irq_data.chip->irq_mask(&desc->irq_data);
70
71 ex_interrupt = *IXDP2X01_INT_STAT_REG & valid_irq_mask;
72
73 if (!ex_interrupt) {
74 printk(KERN_ERR "Spurious IXDP2X01 CPLD interrupt!\n");
75 return;
76 }
77
78 for (i = 0; i < IXP2000_BOARD_IRQS; i++) {
79 if (ex_interrupt & (1 << i)) {
80 int cpld_irq = IXP2000_BOARD_IRQ(0) + i;
81 generic_handle_irq(cpld_irq);
82 }
83 }
84
85 desc->irq_data.chip->irq_unmask(&desc->irq_data);
86 }
87
88 static struct irq_chip ixdp2x01_irq_chip = {
89 .irq_mask = ixdp2x01_irq_mask,
90 .irq_ack = ixdp2x01_irq_mask,
91 .irq_unmask = ixdp2x01_irq_unmask
92 };
93
94 /*
95 * We only do anything if we are the master NPU on the board.
96 * The slave NPU only has the ethernet chip going directly to
97 * the PCIB interrupt input.
98 */
ixdp2x01_init_irq(void)99 void __init ixdp2x01_init_irq(void)
100 {
101 int irq = 0;
102
103 /* initialize chip specific interrupts */
104 ixp2000_init_irq();
105
106 if (machine_is_ixdp2401())
107 valid_irq_mask = IXDP2401_VALID_IRQ_MASK;
108 else
109 valid_irq_mask = IXDP2801_VALID_IRQ_MASK;
110
111 /* Mask all interrupts from CPLD, disable simulation */
112 ixp2000_reg_write(IXDP2X01_INT_MASK_SET_REG, 0xffffffff);
113 ixp2000_reg_wrb(IXDP2X01_INT_SIM_REG, 0);
114
115 for (irq = NR_IXP2000_IRQS; irq < NR_IXDP2X01_IRQS; irq++) {
116 if (irq & valid_irq_mask) {
117 irq_set_chip_and_handler(irq, &ixdp2x01_irq_chip,
118 handle_level_irq);
119 set_irq_flags(irq, IRQF_VALID);
120 } else {
121 set_irq_flags(irq, 0);
122 }
123 }
124
125 /* Hook into PCI interrupts */
126 irq_set_chained_handler(IRQ_IXP2000_PCIB, ixdp2x01_irq_handler);
127 }
128
129
130 /*************************************************************************
131 * IXDP2x01 memory map
132 *************************************************************************/
133 static struct map_desc ixdp2x01_io_desc __initdata = {
134 .virtual = IXDP2X01_VIRT_CPLD_BASE,
135 .pfn = __phys_to_pfn(IXDP2X01_PHYS_CPLD_BASE),
136 .length = IXDP2X01_CPLD_REGION_SIZE,
137 .type = MT_DEVICE
138 };
139
ixdp2x01_map_io(void)140 static void __init ixdp2x01_map_io(void)
141 {
142 ixp2000_map_io();
143 iotable_init(&ixdp2x01_io_desc, 1);
144 }
145
146
147 /*************************************************************************
148 * IXDP2x01 serial ports
149 *************************************************************************/
150 static struct plat_serial8250_port ixdp2x01_serial_port1[] = {
151 {
152 .mapbase = (unsigned long)IXDP2X01_UART1_PHYS_BASE,
153 .membase = (char *)IXDP2X01_UART1_VIRT_BASE,
154 .irq = IRQ_IXDP2X01_UART1,
155 .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
156 .iotype = UPIO_MEM32,
157 .regshift = 2,
158 .uartclk = IXDP2X01_UART_CLK,
159 },
160 { }
161 };
162
163 static struct resource ixdp2x01_uart_resource1 = {
164 .start = IXDP2X01_UART1_PHYS_BASE,
165 .end = IXDP2X01_UART1_PHYS_BASE + 0xffff,
166 .flags = IORESOURCE_MEM,
167 };
168
169 static struct platform_device ixdp2x01_serial_device1 = {
170 .name = "serial8250",
171 .id = PLAT8250_DEV_PLATFORM1,
172 .dev = {
173 .platform_data = ixdp2x01_serial_port1,
174 },
175 .num_resources = 1,
176 .resource = &ixdp2x01_uart_resource1,
177 };
178
179 static struct plat_serial8250_port ixdp2x01_serial_port2[] = {
180 {
181 .mapbase = (unsigned long)IXDP2X01_UART2_PHYS_BASE,
182 .membase = (char *)IXDP2X01_UART2_VIRT_BASE,
183 .irq = IRQ_IXDP2X01_UART2,
184 .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
185 .iotype = UPIO_MEM32,
186 .regshift = 2,
187 .uartclk = IXDP2X01_UART_CLK,
188 },
189 { }
190 };
191
192 static struct resource ixdp2x01_uart_resource2 = {
193 .start = IXDP2X01_UART2_PHYS_BASE,
194 .end = IXDP2X01_UART2_PHYS_BASE + 0xffff,
195 .flags = IORESOURCE_MEM,
196 };
197
198 static struct platform_device ixdp2x01_serial_device2 = {
199 .name = "serial8250",
200 .id = PLAT8250_DEV_PLATFORM2,
201 .dev = {
202 .platform_data = ixdp2x01_serial_port2,
203 },
204 .num_resources = 1,
205 .resource = &ixdp2x01_uart_resource2,
206 };
207
ixdp2x01_uart_init(void)208 static void ixdp2x01_uart_init(void)
209 {
210 platform_device_register(&ixdp2x01_serial_device1);
211 platform_device_register(&ixdp2x01_serial_device2);
212 }
213
214
215 /*************************************************************************
216 * IXDP2x01 timer tick configuration
217 *************************************************************************/
218 static unsigned int ixdp2x01_clock;
219
ixdp2x01_clock_setup(char * str)220 static int __init ixdp2x01_clock_setup(char *str)
221 {
222 ixdp2x01_clock = simple_strtoul(str, NULL, 10);
223
224 return 1;
225 }
226
227 __setup("ixdp2x01_clock=", ixdp2x01_clock_setup);
228
ixdp2x01_timer_init(void)229 static void __init ixdp2x01_timer_init(void)
230 {
231 if (!ixdp2x01_clock)
232 ixdp2x01_clock = 50000000;
233
234 ixp2000_init_time(ixdp2x01_clock);
235 }
236
237 static struct sys_timer ixdp2x01_timer = {
238 .init = ixdp2x01_timer_init,
239 .offset = ixp2000_gettimeoffset,
240 };
241
242 /*************************************************************************
243 * IXDP2x01 PCI
244 *************************************************************************/
ixdp2x01_pci_preinit(void)245 void __init ixdp2x01_pci_preinit(void)
246 {
247 ixp2000_reg_write(IXP2000_PCI_ADDR_EXT, 0x00000000);
248 ixp2000_pci_preinit();
249 pcibios_setup("firmware");
250 }
251
252 #define DEVPIN(dev, pin) ((pin) | ((dev) << 3))
253
ixdp2x01_pci_map_irq(const struct pci_dev * dev,u8 slot,u8 pin)254 static int __init ixdp2x01_pci_map_irq(const struct pci_dev *dev, u8 slot,
255 u8 pin)
256 {
257 u8 bus = dev->bus->number;
258 u32 devpin = DEVPIN(PCI_SLOT(dev->devfn), pin);
259 struct pci_bus *tmp_bus = dev->bus;
260
261 /* Primary bus, no interrupts here */
262 if (bus == 0) {
263 return -1;
264 }
265
266 /* Lookup first leaf in bus tree */
267 while ((tmp_bus->parent != NULL) && (tmp_bus->parent->parent != NULL)) {
268 tmp_bus = tmp_bus->parent;
269 }
270
271 /* Select between known bridges */
272 switch (tmp_bus->self->devfn | (tmp_bus->self->bus->number << 8)) {
273 /* Device is located after first MB bridge */
274 case 0x0008:
275 if (tmp_bus == dev->bus) {
276 /* Device is located directly after first MB bridge */
277 switch (devpin) {
278 case DEVPIN(1, 1): /* Onboard 82546 ch 0 */
279 if (machine_is_ixdp2401())
280 return IRQ_IXDP2401_INTA_82546;
281 return -1;
282 case DEVPIN(1, 2): /* Onboard 82546 ch 1 */
283 if (machine_is_ixdp2401())
284 return IRQ_IXDP2401_INTB_82546;
285 return -1;
286 case DEVPIN(0, 1): /* PMC INTA# */
287 return IRQ_IXDP2X01_SPCI_PMC_INTA;
288 case DEVPIN(0, 2): /* PMC INTB# */
289 return IRQ_IXDP2X01_SPCI_PMC_INTB;
290 case DEVPIN(0, 3): /* PMC INTC# */
291 return IRQ_IXDP2X01_SPCI_PMC_INTC;
292 case DEVPIN(0, 4): /* PMC INTD# */
293 return IRQ_IXDP2X01_SPCI_PMC_INTD;
294 }
295 }
296 break;
297 case 0x0010:
298 if (tmp_bus == dev->bus) {
299 /* Device is located directly after second MB bridge */
300 /* Secondary bus of second bridge */
301 switch (devpin) {
302 case DEVPIN(0, 1): /* DB#0 */
303 return IRQ_IXDP2X01_SPCI_DB_0;
304 case DEVPIN(1, 1): /* DB#1 */
305 return IRQ_IXDP2X01_SPCI_DB_1;
306 }
307 } else {
308 /* Device is located indirectly after second MB bridge */
309 /* Not supported now */
310 }
311 break;
312 }
313
314 return -1;
315 }
316
317
ixdp2x01_pci_setup(int nr,struct pci_sys_data * sys)318 static int ixdp2x01_pci_setup(int nr, struct pci_sys_data *sys)
319 {
320 sys->mem_offset = 0xe0000000;
321
322 if (machine_is_ixdp2801() || machine_is_ixdp28x5())
323 sys->mem_offset -= ((*IXP2000_PCI_ADDR_EXT & 0xE000) << 16);
324
325 return ixp2000_pci_setup(nr, sys);
326 }
327
328 struct hw_pci ixdp2x01_pci __initdata = {
329 .nr_controllers = 1,
330 .setup = ixdp2x01_pci_setup,
331 .preinit = ixdp2x01_pci_preinit,
332 .scan = ixp2000_pci_scan_bus,
333 .map_irq = ixdp2x01_pci_map_irq,
334 };
335
ixdp2x01_pci_init(void)336 int __init ixdp2x01_pci_init(void)
337 {
338 if (machine_is_ixdp2401() || machine_is_ixdp2801() ||\
339 machine_is_ixdp28x5())
340 pci_common_init(&ixdp2x01_pci);
341
342 return 0;
343 }
344
345 subsys_initcall(ixdp2x01_pci_init);
346
347 /*************************************************************************
348 * IXDP2x01 Machine Initialization
349 *************************************************************************/
350 static struct flash_platform_data ixdp2x01_flash_platform_data = {
351 .map_name = "cfi_probe",
352 .width = 1,
353 };
354
ixdp2x01_flash_bank_setup(unsigned long ofs)355 static unsigned long ixdp2x01_flash_bank_setup(unsigned long ofs)
356 {
357 ixp2000_reg_wrb(IXDP2X01_CPLD_FLASH_REG,
358 ((ofs >> IXDP2X01_FLASH_WINDOW_BITS) | IXDP2X01_CPLD_FLASH_INTERN));
359 return (ofs & IXDP2X01_FLASH_WINDOW_MASK);
360 }
361
362 static struct ixp2000_flash_data ixdp2x01_flash_data = {
363 .platform_data = &ixdp2x01_flash_platform_data,
364 .bank_setup = ixdp2x01_flash_bank_setup
365 };
366
367 static struct resource ixdp2x01_flash_resource = {
368 .start = 0xc4000000,
369 .end = 0xc4000000 + 0x01ffffff,
370 .flags = IORESOURCE_MEM,
371 };
372
373 static struct platform_device ixdp2x01_flash = {
374 .name = "IXP2000-Flash",
375 .id = 0,
376 .dev = {
377 .platform_data = &ixdp2x01_flash_data,
378 },
379 .num_resources = 1,
380 .resource = &ixdp2x01_flash_resource,
381 };
382
383 static struct ixp2000_i2c_pins ixdp2x01_i2c_gpio_pins = {
384 .sda_pin = IXDP2X01_GPIO_SDA,
385 .scl_pin = IXDP2X01_GPIO_SCL,
386 };
387
388 static struct platform_device ixdp2x01_i2c_controller = {
389 .name = "IXP2000-I2C",
390 .id = 0,
391 .dev = {
392 .platform_data = &ixdp2x01_i2c_gpio_pins,
393 },
394 .num_resources = 0
395 };
396
397 static struct platform_device *ixdp2x01_devices[] __initdata = {
398 &ixdp2x01_flash,
399 &ixdp2x01_i2c_controller
400 };
401
ixdp2x01_init_machine(void)402 static void __init ixdp2x01_init_machine(void)
403 {
404 ixp2000_reg_wrb(IXDP2X01_CPLD_FLASH_REG,
405 (IXDP2X01_CPLD_FLASH_BANK_MASK | IXDP2X01_CPLD_FLASH_INTERN));
406
407 ixdp2x01_flash_data.nr_banks =
408 ((*IXDP2X01_CPLD_FLASH_REG & IXDP2X01_CPLD_FLASH_BANK_MASK) + 1);
409
410 platform_add_devices(ixdp2x01_devices, ARRAY_SIZE(ixdp2x01_devices));
411 ixp2000_uart_init();
412 ixdp2x01_uart_init();
413 }
414
ixdp2401_restart(char mode,const char * cmd)415 static void ixdp2401_restart(char mode, const char *cmd)
416 {
417 /*
418 * Reset flash banking register so that we are pointing at
419 * RedBoot bank.
420 */
421 ixp2000_reg_write(IXDP2X01_CPLD_FLASH_REG,
422 ((0 >> IXDP2X01_FLASH_WINDOW_BITS)
423 | IXDP2X01_CPLD_FLASH_INTERN));
424 ixp2000_reg_wrb(IXDP2X01_CPLD_RESET_REG, 0xffffffff);
425
426 ixp2000_restart(mode, cmd);
427 }
428
ixdp280x_restart(char mode,const char * cmd)429 static void ixdp280x_restart(char mode, const char *cmd)
430 {
431 /*
432 * On IXDP2801 we need to write this magic sequence to the CPLD
433 * to cause a complete reset of the CPU and all external devices
434 * and move the flash bank register back to 0.
435 */
436 unsigned long reset_reg = *IXDP2X01_CPLD_RESET_REG;
437
438 reset_reg = 0x55AA0000 | (reset_reg & 0x0000FFFF);
439 ixp2000_reg_write(IXDP2X01_CPLD_RESET_REG, reset_reg);
440 ixp2000_reg_wrb(IXDP2X01_CPLD_RESET_REG, 0x80000000);
441
442 ixp2000_restart(mode, cmd);
443 }
444
445 #ifdef CONFIG_ARCH_IXDP2401
446 MACHINE_START(IXDP2401, "Intel IXDP2401 Development Platform")
447 /* Maintainer: MontaVista Software, Inc. */
448 .atag_offset = 0x100,
449 .map_io = ixdp2x01_map_io,
450 .init_irq = ixdp2x01_init_irq,
451 .timer = &ixdp2x01_timer,
452 .init_machine = ixdp2x01_init_machine,
453 .restart = ixdp2401_restart,
454 MACHINE_END
455 #endif
456
457 #ifdef CONFIG_ARCH_IXDP2801
458 MACHINE_START(IXDP2801, "Intel IXDP2801 Development Platform")
459 /* Maintainer: MontaVista Software, Inc. */
460 .atag_offset = 0x100,
461 .map_io = ixdp2x01_map_io,
462 .init_irq = ixdp2x01_init_irq,
463 .timer = &ixdp2x01_timer,
464 .init_machine = ixdp2x01_init_machine,
465 .restart = ixdp280x_restart,
466 MACHINE_END
467
468 /*
469 * IXDP28x5 is basically an IXDP2801 with a different CPU but Intel
470 * changed the machine ID in the bootloader
471 */
472 MACHINE_START(IXDP28X5, "Intel IXDP2805/2855 Development Platform")
473 /* Maintainer: MontaVista Software, Inc. */
474 .atag_offset = 0x100,
475 .map_io = ixdp2x01_map_io,
476 .init_irq = ixdp2x01_init_irq,
477 .timer = &ixdp2x01_timer,
478 .init_machine = ixdp2x01_init_machine,
479 .restart = ixdp280x_restart,
480 MACHINE_END
481 #endif
482
483
484