1# 2# USB Storage driver configuration 3# 4 5comment "NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may" 6comment "also be needed; see USB_STORAGE Help for more info" 7 depends on USB 8 9config USB_STORAGE 10 tristate "USB Mass Storage support" 11 depends on USB && SCSI 12 ---help--- 13 Say Y here if you want to connect USB mass storage devices to your 14 computer's USB port. This is the driver you need for USB 15 floppy drives, USB hard disks, USB tape drives, USB CD-ROMs, 16 USB flash devices, and memory sticks, along with 17 similar devices. This driver may also be used for some cameras 18 and card readers. 19 20 This option depends on 'SCSI' support being enabled, but you 21 probably also need 'SCSI device support: SCSI disk support' 22 (BLK_DEV_SD) for most USB storage devices. 23 24 To compile this driver as a module, choose M here: the 25 module will be called usb-storage. 26 27config USB_STORAGE_DEBUG 28 bool "USB Mass Storage verbose debug" 29 depends on USB_STORAGE 30 help 31 Say Y here in order to have the USB Mass Storage code generate 32 verbose debugging messages. 33 34config USB_STORAGE_REALTEK 35 tristate "Realtek Card Reader support" 36 depends on USB_STORAGE 37 help 38 Say Y here to include additional code to support the power-saving function 39 for Realtek RTS51xx USB card readers. 40 41 If this driver is compiled as a module, it will be named ums-realtek. 42 43 44config USB_STORAGE_DATAFAB 45 tristate "Datafab Compact Flash Reader support" 46 depends on USB_STORAGE 47 help 48 Support for certain Datafab CompactFlash readers. 49 Datafab has a web page at <http://www.datafab.com/>. 50 51 If this driver is compiled as a module, it will be named ums-datafab. 52 53config USB_STORAGE_FREECOM 54 tristate "Freecom USB/ATAPI Bridge support" 55 depends on USB_STORAGE 56 help 57 Support for the Freecom USB to IDE/ATAPI adaptor. 58 Freecom has a web page at <http://www.freecom.de/>. 59 60 If this driver is compiled as a module, it will be named ums-freecom. 61 62config USB_STORAGE_ISD200 63 tristate "ISD-200 USB/ATA Bridge support" 64 depends on USB_STORAGE 65 ---help--- 66 Say Y here if you want to use USB Mass Store devices based 67 on the In-Systems Design ISD-200 USB/ATA bridge. 68 69 Some of the products that use this chip are: 70 71 - Archos Jukebox 6000 72 - ISD SmartCable for Storage 73 - Taiwan Skymaster CD530U/DEL-0241 IDE bridge 74 - Sony CRX10U CD-R/RW drive 75 - CyQ've CQ8060A CDRW drive 76 - Planex eXtreme Drive RX-25HU USB-IDE cable (not model RX-25U) 77 78 If this driver is compiled as a module, it will be named ums-isd200. 79 80config USB_STORAGE_USBAT 81 tristate "USBAT/USBAT02-based storage support" 82 depends on USB_STORAGE 83 help 84 Say Y here to include additional code to support storage devices 85 based on the SCM/Shuttle USBAT/USBAT02 processors. 86 87 Devices reported to work with this driver include: 88 - CompactFlash reader included with Kodak DC3800 camera 89 - Dane-Elec Zmate CompactFlash reader 90 - Delkin Efilm reader2 91 - HP 8200e/8210e/8230e CD-Writer Plus drives 92 - I-JAM JS-50U 93 - Jessops CompactFlash JESDCFRU BLACK 94 - Kingston Technology PCREAD-USB/CF 95 - Maxell UA4 CompactFlash reader 96 - Memorex UCF-100 97 - Microtech ZiO! ICS-45 CF2 98 - RCA LYRA MP3 portable 99 - Sandisk ImageMate SDDR-05b 100 101 If this driver is compiled as a module, it will be named ums-usbat. 102 103config USB_STORAGE_SDDR09 104 tristate "SanDisk SDDR-09 (and other SmartMedia, including DPCM) support" 105 depends on USB_STORAGE 106 help 107 Say Y here to include additional code to support the Sandisk SDDR-09 108 SmartMedia reader in the USB Mass Storage driver. 109 Also works for the Microtech Zio! CompactFlash/SmartMedia reader. 110 111 If this driver is compiled as a module, it will be named ums-sddr09. 112 113config USB_STORAGE_SDDR55 114 tristate "SanDisk SDDR-55 SmartMedia support" 115 depends on USB_STORAGE 116 help 117 Say Y here to include additional code to support the Sandisk SDDR-55 118 SmartMedia reader in the USB Mass Storage driver. 119 120 If this driver is compiled as a module, it will be named ums-sddr55. 121 122config USB_STORAGE_JUMPSHOT 123 tristate "Lexar Jumpshot Compact Flash Reader" 124 depends on USB_STORAGE 125 help 126 Say Y here to include additional code to support the Lexar Jumpshot 127 USB CompactFlash reader. 128 129 If this driver is compiled as a module, it will be named ums-jumpshot. 130 131config USB_STORAGE_ALAUDA 132 tristate "Olympus MAUSB-10/Fuji DPC-R1 support" 133 depends on USB_STORAGE 134 help 135 Say Y here to include additional code to support the Olympus MAUSB-10 136 and Fujifilm DPC-R1 USB Card reader/writer devices. 137 138 These devices are based on the Alauda chip and support both 139 XD and SmartMedia cards. 140 141 If this driver is compiled as a module, it will be named ums-alauda. 142 143config USB_STORAGE_ONETOUCH 144 tristate "Support OneTouch Button on Maxtor Hard Drives" 145 depends on USB_STORAGE 146 depends on INPUT=y || INPUT=USB_STORAGE 147 help 148 Say Y here to include additional code to support the Maxtor OneTouch 149 USB hard drive's onetouch button. 150 151 This code registers the button on the front of Maxtor OneTouch USB 152 hard drive's as an input device. An action can be associated with 153 this input in any keybinding software. (e.g. gnome's keyboard short- 154 cuts) 155 156 If this driver is compiled as a module, it will be named ums-onetouch. 157 158config USB_STORAGE_KARMA 159 tristate "Support for Rio Karma music player" 160 depends on USB_STORAGE 161 help 162 Say Y here to include additional code to support the Rio Karma 163 USB interface. 164 165 This code places the Rio Karma into mass storage mode, enabling 166 it to be mounted as an ordinary filesystem. Performing an eject 167 on the resulting scsi device node returns the Karma to normal 168 operation. 169 170 If this driver is compiled as a module, it will be named ums-karma. 171 172config USB_STORAGE_CYPRESS_ATACB 173 tristate "SAT emulation on Cypress USB/ATA Bridge with ATACB" 174 depends on USB_STORAGE 175 ---help--- 176 Say Y here if you want to use SAT (ata pass through) on devices based 177 on the Cypress USB/ATA bridge supporting ATACB. This will allow you 178 to use tools to tune and monitor your drive (like hdparm or smartctl). 179 180 If you say no here your device will still work with the standard usb 181 mass storage class. 182 183 If this driver is compiled as a module, it will be named ums-cypress. 184 185config USB_STORAGE_ENE_UB6250 186 tristate "USB ENE card reader support" 187 depends on USB && SCSI 188 depends on USB_STORAGE 189 ---help--- 190 Say Y here if you wish to control a ENE SD Card reader. 191 To use SM/MS card, please build driver/staging/keucr/keucr.ko 192 193 This option depends on 'SCSI' support being enabled, but you 194 probably also need 'SCSI device support: SCSI disk support' 195 (BLK_DEV_SD) for most USB storage devices. 196 197 To compile this driver as a module, choose M here: the 198 module will be called ums-eneub6250. 199 200config USB_UAS 201 tristate "USB Attached SCSI" 202 depends on USB && SCSI 203 help 204 The USB Attached SCSI protocol is supported by some USB 205 storage devices. It permits higher performance by supporting 206 multiple outstanding commands. 207 208 If you don't know whether you have a UAS device, it is safe to 209 say 'Y' or 'M' here and the kernel will use the right driver. 210 211 If you compile this driver as a module, it will be named uas. 212 213config USB_LIBUSUAL 214 bool "The shared table of common (or usual) storage devices" 215 depends on USB 216 help 217 This module contains a table of common (or usual) devices 218 for usb-storage and ub drivers, and allows to switch binding 219 of these devices without rebuilding modules. 220 221 Typical syntax of /etc/modprobe.conf is: 222 223 options libusual bias="ub" 224 225 If unsure, say N. 226