1 /*
2 * SL811HS register declarations and HCD data structures
3 *
4 * Copyright (C) 2004 Psion Teklogix
5 * Copyright (C) 2004 David Brownell
6 * Copyright (C) 2001 Cypress Semiconductor Inc.
7 */
8
9 /*
10 * SL811HS has transfer registers, and control registers. In host/master
11 * mode one set of registers is used; in peripheral/slave mode, another.
12 * - SL11H only has some "A" transfer registers from 0x00-0x04
13 * - SL811HS also has "B" registers from 0x08-0x0c
14 * - SL811S (or HS in slave mode) has four A+B sets, at 00, 10, 20, 30
15 */
16
17 #define SL811_EP_A(base) ((base) + 0)
18 #define SL811_EP_B(base) ((base) + 8)
19
20 #define SL811_HOST_BUF 0x00
21 #define SL811_PERIPH_EP0 0x00
22 #define SL811_PERIPH_EP1 0x10
23 #define SL811_PERIPH_EP2 0x20
24 #define SL811_PERIPH_EP3 0x30
25
26
27 /* TRANSFER REGISTERS: host and peripheral sides are similar
28 * except for the control models (master vs slave).
29 */
30 #define SL11H_HOSTCTLREG 0
31 # define SL11H_HCTLMASK_ARM 0x01
32 # define SL11H_HCTLMASK_ENABLE 0x02
33 # define SL11H_HCTLMASK_IN 0x00
34 # define SL11H_HCTLMASK_OUT 0x04
35 # define SL11H_HCTLMASK_ISOCH 0x10
36 # define SL11H_HCTLMASK_AFTERSOF 0x20
37 # define SL11H_HCTLMASK_TOGGLE 0x40
38 # define SL11H_HCTLMASK_PREAMBLE 0x80
39 #define SL11H_BUFADDRREG 1
40 #define SL11H_BUFLNTHREG 2
41 #define SL11H_PKTSTATREG 3 /* read */
42 # define SL11H_STATMASK_ACK 0x01
43 # define SL11H_STATMASK_ERROR 0x02
44 # define SL11H_STATMASK_TMOUT 0x04
45 # define SL11H_STATMASK_SEQ 0x08
46 # define SL11H_STATMASK_SETUP 0x10
47 # define SL11H_STATMASK_OVF 0x20
48 # define SL11H_STATMASK_NAK 0x40
49 # define SL11H_STATMASK_STALL 0x80
50 #define SL11H_PIDEPREG 3 /* write */
51 # define SL_SETUP 0xd0
52 # define SL_IN 0x90
53 # define SL_OUT 0x10
54 # define SL_SOF 0x50
55 # define SL_PREAMBLE 0xc0
56 # define SL_NAK 0xa0
57 # define SL_STALL 0xe0
58 # define SL_DATA0 0x30
59 # define SL_DATA1 0xb0
60 #define SL11H_XFERCNTREG 4 /* read */
61 #define SL11H_DEVADDRREG 4 /* write */
62
63
64 /* CONTROL REGISTERS: host and peripheral are very different.
65 */
66 #define SL11H_CTLREG1 5
67 # define SL11H_CTL1MASK_SOF_ENA 0x01
68 # define SL11H_CTL1MASK_FORCE 0x18
69 # define SL11H_CTL1MASK_NORMAL 0x00
70 # define SL11H_CTL1MASK_SE0 0x08 /* reset */
71 # define SL11H_CTL1MASK_J 0x10
72 # define SL11H_CTL1MASK_K 0x18 /* resume */
73 # define SL11H_CTL1MASK_LSPD 0x20
74 # define SL11H_CTL1MASK_SUSPEND 0x40
75 #define SL11H_IRQ_ENABLE 6
76 # define SL11H_INTMASK_DONE_A 0x01
77 # define SL11H_INTMASK_DONE_B 0x02
78 # define SL11H_INTMASK_SOFINTR 0x10
79 # define SL11H_INTMASK_INSRMV 0x20 /* to/from SE0 */
80 # define SL11H_INTMASK_RD 0x40
81 # define SL11H_INTMASK_DP 0x80 /* only in INTSTATREG */
82 #define SL11S_ADDRESS 7
83
84 /* 0x08-0x0c are for the B buffer (not in SL11) */
85
86 #define SL11H_IRQ_STATUS 0x0D /* write to ack */
87 #define SL11H_HWREVREG 0x0E /* read */
88 # define SL11H_HWRMASK_HWREV 0xF0
89 #define SL11H_SOFLOWREG 0x0E /* write */
90 #define SL11H_SOFTMRREG 0x0F /* read */
91
92 /* a write to this register enables SL811HS features.
93 * HOST flag presumably overrides the chip input signal?
94 */
95 #define SL811HS_CTLREG2 0x0F
96 # define SL811HS_CTL2MASK_SOF_MASK 0x3F
97 # define SL811HS_CTL2MASK_DSWAP 0x40
98 # define SL811HS_CTL2MASK_HOST 0x80
99
100 #define SL811HS_CTL2_INIT (SL811HS_CTL2MASK_HOST | 0x2e)
101
102
103 /* DATA BUFFERS: registers from 0x10..0xff are for data buffers;
104 * that's 240 bytes, which we'll split evenly between A and B sides.
105 * Only ISO can use more than 64 bytes per packet.
106 * (The SL11S has 0x40..0xff for buffers.)
107 */
108 #define H_MAXPACKET 120 /* bytes in A or B fifos */
109
110 #define SL11H_DATA_START 0x10
111 #define SL811HS_PACKET_BUF(is_a) ((is_a) \
112 ? SL11H_DATA_START \
113 : (SL11H_DATA_START + H_MAXPACKET))
114
115 /*-------------------------------------------------------------------------*/
116
117 #define LOG2_PERIODIC_SIZE 5 /* arbitrary; this matches OHCI */
118 #define PERIODIC_SIZE (1 << LOG2_PERIODIC_SIZE)
119
120 struct sl811 {
121 spinlock_t lock;
122 void __iomem *addr_reg;
123 void __iomem *data_reg;
124 struct sl811_platform_data *board;
125 struct proc_dir_entry *pde;
126
127 unsigned long stat_insrmv;
128 unsigned long stat_wake;
129 unsigned long stat_sof;
130 unsigned long stat_a;
131 unsigned long stat_b;
132 unsigned long stat_lost;
133 unsigned long stat_overrun;
134
135 /* sw model */
136 struct timer_list timer;
137 struct sl811h_ep *next_periodic;
138 struct sl811h_ep *next_async;
139
140 struct sl811h_ep *active_a;
141 unsigned long jiffies_a;
142 struct sl811h_ep *active_b;
143 unsigned long jiffies_b;
144
145 u32 port1;
146 u8 ctrl1, ctrl2, irq_enable;
147 u16 frame;
148
149 /* async schedule: control, bulk */
150 struct list_head async;
151
152 /* periodic schedule: interrupt, iso */
153 u16 load[PERIODIC_SIZE];
154 struct sl811h_ep *periodic[PERIODIC_SIZE];
155 unsigned periodic_count;
156 };
157
hcd_to_sl811(struct usb_hcd * hcd)158 static inline struct sl811 *hcd_to_sl811(struct usb_hcd *hcd)
159 {
160 return (struct sl811 *) (hcd->hcd_priv);
161 }
162
sl811_to_hcd(struct sl811 * sl811)163 static inline struct usb_hcd *sl811_to_hcd(struct sl811 *sl811)
164 {
165 return container_of((void *) sl811, struct usb_hcd, hcd_priv);
166 }
167
168 struct sl811h_ep {
169 struct usb_host_endpoint *hep;
170 struct usb_device *udev;
171
172 u8 defctrl;
173 u8 maxpacket;
174 u8 epnum;
175 u8 nextpid;
176
177 u16 error_count;
178 u16 nak_count;
179 u16 length; /* of current packet */
180
181 /* periodic schedule */
182 u16 period;
183 u16 branch;
184 u16 load;
185 struct sl811h_ep *next;
186
187 /* async schedule */
188 struct list_head schedule;
189 };
190
191 /*-------------------------------------------------------------------------*/
192
193 /* These register utilities should work for the SL811S register API too
194 * NOTE: caller must hold sl811->lock.
195 */
196
sl811_read(struct sl811 * sl811,int reg)197 static inline u8 sl811_read(struct sl811 *sl811, int reg)
198 {
199 writeb(reg, sl811->addr_reg);
200 return readb(sl811->data_reg);
201 }
202
sl811_write(struct sl811 * sl811,int reg,u8 val)203 static inline void sl811_write(struct sl811 *sl811, int reg, u8 val)
204 {
205 writeb(reg, sl811->addr_reg);
206 writeb(val, sl811->data_reg);
207 }
208
209 static inline void
sl811_write_buf(struct sl811 * sl811,int addr,const void * buf,size_t count)210 sl811_write_buf(struct sl811 *sl811, int addr, const void *buf, size_t count)
211 {
212 const u8 *data;
213 void __iomem *data_reg;
214
215 if (!count)
216 return;
217 writeb(addr, sl811->addr_reg);
218
219 data = buf;
220 data_reg = sl811->data_reg;
221 do {
222 writeb(*data++, data_reg);
223 } while (--count);
224 }
225
226 static inline void
sl811_read_buf(struct sl811 * sl811,int addr,void * buf,size_t count)227 sl811_read_buf(struct sl811 *sl811, int addr, void *buf, size_t count)
228 {
229 u8 *data;
230 void __iomem *data_reg;
231
232 if (!count)
233 return;
234 writeb(addr, sl811->addr_reg);
235
236 data = buf;
237 data_reg = sl811->data_reg;
238 do {
239 *data++ = readb(data_reg);
240 } while (--count);
241 }
242
243 /*-------------------------------------------------------------------------*/
244
245 #ifdef DEBUG
246 #define DBG(stuff...) printk(KERN_DEBUG "sl811: " stuff)
247 #else
248 #define DBG(stuff...) do{}while(0)
249 #endif
250
251 #ifdef VERBOSE
252 # define VDBG DBG
253 #else
254 # define VDBG(stuff...) do{}while(0)
255 #endif
256
257 #ifdef PACKET_TRACE
258 # define PACKET VDBG
259 #else
260 # define PACKET(stuff...) do{}while(0)
261 #endif
262
263 #define ERR(stuff...) printk(KERN_ERR "sl811: " stuff)
264 #define WARNING(stuff...) printk(KERN_WARNING "sl811: " stuff)
265 #define INFO(stuff...) printk(KERN_INFO "sl811: " stuff)
266
267