1 /*
2 * PMC-Sierra SPC 8001 SAS/SATA based host adapters driver
3 *
4 * Copyright (c) 2008-2009 USI Co., Ltd.
5 * All rights reserved.
6 *
7 * Redistribution and use in source and binary forms, with or without
8 * modification, are permitted provided that the following conditions
9 * are met:
10 * 1. Redistributions of source code must retain the above copyright
11 * notice, this list of conditions, and the following disclaimer,
12 * without modification.
13 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
14 * substantially similar to the "NO WARRANTY" disclaimer below
15 * ("Disclaimer") and any redistribution must be conditioned upon
16 * including a substantially similar Disclaimer requirement for further
17 * binary redistribution.
18 * 3. Neither the names of the above-listed copyright holders nor the names
19 * of any contributors may be used to endorse or promote products derived
20 * from this software without specific prior written permission.
21 *
22 * Alternatively, this software may be distributed under the terms of the
23 * GNU General Public License ("GPL") version 2 as published by the Free
24 * Software Foundation.
25 *
26 * NO WARRANTY
27 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
28 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
29 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
30 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
31 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
32 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
33 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
34 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
35 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
36 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
37 * POSSIBILITY OF SUCH DAMAGES.
38 *
39 */
40
41 #include <linux/slab.h>
42 #include "pm8001_sas.h"
43 #include "pm8001_chips.h"
44
45 static struct scsi_transport_template *pm8001_stt;
46
47 static const struct pm8001_chip_info pm8001_chips[] = {
48 [chip_8001] = { 8, &pm8001_8001_dispatch,},
49 };
50 static int pm8001_id;
51
52 LIST_HEAD(hba_list);
53
54 struct workqueue_struct *pm8001_wq;
55
56 /**
57 * The main structure which LLDD must register for scsi core.
58 */
59 static struct scsi_host_template pm8001_sht = {
60 .module = THIS_MODULE,
61 .name = DRV_NAME,
62 .queuecommand = sas_queuecommand,
63 .target_alloc = sas_target_alloc,
64 .slave_configure = pm8001_slave_configure,
65 .slave_destroy = sas_slave_destroy,
66 .scan_finished = pm8001_scan_finished,
67 .scan_start = pm8001_scan_start,
68 .change_queue_depth = sas_change_queue_depth,
69 .change_queue_type = sas_change_queue_type,
70 .bios_param = sas_bios_param,
71 .can_queue = 1,
72 .cmd_per_lun = 1,
73 .this_id = -1,
74 .sg_tablesize = SG_ALL,
75 .max_sectors = SCSI_DEFAULT_MAX_SECTORS,
76 .use_clustering = ENABLE_CLUSTERING,
77 .eh_device_reset_handler = sas_eh_device_reset_handler,
78 .eh_bus_reset_handler = sas_eh_bus_reset_handler,
79 .slave_alloc = pm8001_slave_alloc,
80 .target_destroy = sas_target_destroy,
81 .ioctl = sas_ioctl,
82 .shost_attrs = pm8001_host_attrs,
83 };
84
85 /**
86 * Sas layer call this function to execute specific task.
87 */
88 static struct sas_domain_function_template pm8001_transport_ops = {
89 .lldd_dev_found = pm8001_dev_found,
90 .lldd_dev_gone = pm8001_dev_gone,
91
92 .lldd_execute_task = pm8001_queue_command,
93 .lldd_control_phy = pm8001_phy_control,
94
95 .lldd_abort_task = pm8001_abort_task,
96 .lldd_abort_task_set = pm8001_abort_task_set,
97 .lldd_clear_aca = pm8001_clear_aca,
98 .lldd_clear_task_set = pm8001_clear_task_set,
99 .lldd_I_T_nexus_reset = pm8001_I_T_nexus_reset,
100 .lldd_lu_reset = pm8001_lu_reset,
101 .lldd_query_task = pm8001_query_task,
102 };
103
104 /**
105 *pm8001_phy_init - initiate our adapter phys
106 *@pm8001_ha: our hba structure.
107 *@phy_id: phy id.
108 */
pm8001_phy_init(struct pm8001_hba_info * pm8001_ha,int phy_id)109 static void __devinit pm8001_phy_init(struct pm8001_hba_info *pm8001_ha,
110 int phy_id)
111 {
112 struct pm8001_phy *phy = &pm8001_ha->phy[phy_id];
113 struct asd_sas_phy *sas_phy = &phy->sas_phy;
114 phy->phy_state = 0;
115 phy->pm8001_ha = pm8001_ha;
116 sas_phy->enabled = (phy_id < pm8001_ha->chip->n_phy) ? 1 : 0;
117 sas_phy->class = SAS;
118 sas_phy->iproto = SAS_PROTOCOL_ALL;
119 sas_phy->tproto = 0;
120 sas_phy->type = PHY_TYPE_PHYSICAL;
121 sas_phy->role = PHY_ROLE_INITIATOR;
122 sas_phy->oob_mode = OOB_NOT_CONNECTED;
123 sas_phy->linkrate = SAS_LINK_RATE_UNKNOWN;
124 sas_phy->id = phy_id;
125 sas_phy->sas_addr = &pm8001_ha->sas_addr[0];
126 sas_phy->frame_rcvd = &phy->frame_rcvd[0];
127 sas_phy->ha = (struct sas_ha_struct *)pm8001_ha->shost->hostdata;
128 sas_phy->lldd_phy = phy;
129 }
130
131 /**
132 *pm8001_free - free hba
133 *@pm8001_ha: our hba structure.
134 *
135 */
pm8001_free(struct pm8001_hba_info * pm8001_ha)136 static void pm8001_free(struct pm8001_hba_info *pm8001_ha)
137 {
138 int i;
139
140 if (!pm8001_ha)
141 return;
142
143 for (i = 0; i < USI_MAX_MEMCNT; i++) {
144 if (pm8001_ha->memoryMap.region[i].virt_ptr != NULL) {
145 pci_free_consistent(pm8001_ha->pdev,
146 pm8001_ha->memoryMap.region[i].element_size,
147 pm8001_ha->memoryMap.region[i].virt_ptr,
148 pm8001_ha->memoryMap.region[i].phys_addr);
149 }
150 }
151 PM8001_CHIP_DISP->chip_iounmap(pm8001_ha);
152 if (pm8001_ha->shost)
153 scsi_host_put(pm8001_ha->shost);
154 flush_workqueue(pm8001_wq);
155 kfree(pm8001_ha->tags);
156 kfree(pm8001_ha);
157 }
158
159 #ifdef PM8001_USE_TASKLET
pm8001_tasklet(unsigned long opaque)160 static void pm8001_tasklet(unsigned long opaque)
161 {
162 struct pm8001_hba_info *pm8001_ha;
163 pm8001_ha = (struct pm8001_hba_info *)opaque;;
164 if (unlikely(!pm8001_ha))
165 BUG_ON(1);
166 PM8001_CHIP_DISP->isr(pm8001_ha);
167 }
168 #endif
169
170
171 /**
172 * pm8001_interrupt - when HBA originate a interrupt,we should invoke this
173 * dispatcher to handle each case.
174 * @irq: irq number.
175 * @opaque: the passed general host adapter struct
176 */
pm8001_interrupt(int irq,void * opaque)177 static irqreturn_t pm8001_interrupt(int irq, void *opaque)
178 {
179 struct pm8001_hba_info *pm8001_ha;
180 irqreturn_t ret = IRQ_HANDLED;
181 struct sas_ha_struct *sha = opaque;
182 pm8001_ha = sha->lldd_ha;
183 if (unlikely(!pm8001_ha))
184 return IRQ_NONE;
185 if (!PM8001_CHIP_DISP->is_our_interupt(pm8001_ha))
186 return IRQ_NONE;
187 #ifdef PM8001_USE_TASKLET
188 tasklet_schedule(&pm8001_ha->tasklet);
189 #else
190 ret = PM8001_CHIP_DISP->isr(pm8001_ha);
191 #endif
192 return ret;
193 }
194
195 /**
196 * pm8001_alloc - initiate our hba structure and 6 DMAs area.
197 * @pm8001_ha:our hba structure.
198 *
199 */
pm8001_alloc(struct pm8001_hba_info * pm8001_ha)200 static int __devinit pm8001_alloc(struct pm8001_hba_info *pm8001_ha)
201 {
202 int i;
203 spin_lock_init(&pm8001_ha->lock);
204 for (i = 0; i < pm8001_ha->chip->n_phy; i++) {
205 pm8001_phy_init(pm8001_ha, i);
206 pm8001_ha->port[i].wide_port_phymap = 0;
207 pm8001_ha->port[i].port_attached = 0;
208 pm8001_ha->port[i].port_state = 0;
209 INIT_LIST_HEAD(&pm8001_ha->port[i].list);
210 }
211
212 pm8001_ha->tags = kzalloc(PM8001_MAX_CCB, GFP_KERNEL);
213 if (!pm8001_ha->tags)
214 goto err_out;
215 /* MPI Memory region 1 for AAP Event Log for fw */
216 pm8001_ha->memoryMap.region[AAP1].num_elements = 1;
217 pm8001_ha->memoryMap.region[AAP1].element_size = PM8001_EVENT_LOG_SIZE;
218 pm8001_ha->memoryMap.region[AAP1].total_len = PM8001_EVENT_LOG_SIZE;
219 pm8001_ha->memoryMap.region[AAP1].alignment = 32;
220
221 /* MPI Memory region 2 for IOP Event Log for fw */
222 pm8001_ha->memoryMap.region[IOP].num_elements = 1;
223 pm8001_ha->memoryMap.region[IOP].element_size = PM8001_EVENT_LOG_SIZE;
224 pm8001_ha->memoryMap.region[IOP].total_len = PM8001_EVENT_LOG_SIZE;
225 pm8001_ha->memoryMap.region[IOP].alignment = 32;
226
227 /* MPI Memory region 3 for consumer Index of inbound queues */
228 pm8001_ha->memoryMap.region[CI].num_elements = 1;
229 pm8001_ha->memoryMap.region[CI].element_size = 4;
230 pm8001_ha->memoryMap.region[CI].total_len = 4;
231 pm8001_ha->memoryMap.region[CI].alignment = 4;
232
233 /* MPI Memory region 4 for producer Index of outbound queues */
234 pm8001_ha->memoryMap.region[PI].num_elements = 1;
235 pm8001_ha->memoryMap.region[PI].element_size = 4;
236 pm8001_ha->memoryMap.region[PI].total_len = 4;
237 pm8001_ha->memoryMap.region[PI].alignment = 4;
238
239 /* MPI Memory region 5 inbound queues */
240 pm8001_ha->memoryMap.region[IB].num_elements = 256;
241 pm8001_ha->memoryMap.region[IB].element_size = 64;
242 pm8001_ha->memoryMap.region[IB].total_len = 256 * 64;
243 pm8001_ha->memoryMap.region[IB].alignment = 64;
244
245 /* MPI Memory region 6 inbound queues */
246 pm8001_ha->memoryMap.region[OB].num_elements = 256;
247 pm8001_ha->memoryMap.region[OB].element_size = 64;
248 pm8001_ha->memoryMap.region[OB].total_len = 256 * 64;
249 pm8001_ha->memoryMap.region[OB].alignment = 64;
250
251 /* Memory region write DMA*/
252 pm8001_ha->memoryMap.region[NVMD].num_elements = 1;
253 pm8001_ha->memoryMap.region[NVMD].element_size = 4096;
254 pm8001_ha->memoryMap.region[NVMD].total_len = 4096;
255 /* Memory region for devices*/
256 pm8001_ha->memoryMap.region[DEV_MEM].num_elements = 1;
257 pm8001_ha->memoryMap.region[DEV_MEM].element_size = PM8001_MAX_DEVICES *
258 sizeof(struct pm8001_device);
259 pm8001_ha->memoryMap.region[DEV_MEM].total_len = PM8001_MAX_DEVICES *
260 sizeof(struct pm8001_device);
261
262 /* Memory region for ccb_info*/
263 pm8001_ha->memoryMap.region[CCB_MEM].num_elements = 1;
264 pm8001_ha->memoryMap.region[CCB_MEM].element_size = PM8001_MAX_CCB *
265 sizeof(struct pm8001_ccb_info);
266 pm8001_ha->memoryMap.region[CCB_MEM].total_len = PM8001_MAX_CCB *
267 sizeof(struct pm8001_ccb_info);
268
269 for (i = 0; i < USI_MAX_MEMCNT; i++) {
270 if (pm8001_mem_alloc(pm8001_ha->pdev,
271 &pm8001_ha->memoryMap.region[i].virt_ptr,
272 &pm8001_ha->memoryMap.region[i].phys_addr,
273 &pm8001_ha->memoryMap.region[i].phys_addr_hi,
274 &pm8001_ha->memoryMap.region[i].phys_addr_lo,
275 pm8001_ha->memoryMap.region[i].total_len,
276 pm8001_ha->memoryMap.region[i].alignment) != 0) {
277 PM8001_FAIL_DBG(pm8001_ha,
278 pm8001_printk("Mem%d alloc failed\n",
279 i));
280 goto err_out;
281 }
282 }
283
284 pm8001_ha->devices = pm8001_ha->memoryMap.region[DEV_MEM].virt_ptr;
285 for (i = 0; i < PM8001_MAX_DEVICES; i++) {
286 pm8001_ha->devices[i].dev_type = NO_DEVICE;
287 pm8001_ha->devices[i].id = i;
288 pm8001_ha->devices[i].device_id = PM8001_MAX_DEVICES;
289 pm8001_ha->devices[i].running_req = 0;
290 }
291 pm8001_ha->ccb_info = pm8001_ha->memoryMap.region[CCB_MEM].virt_ptr;
292 for (i = 0; i < PM8001_MAX_CCB; i++) {
293 pm8001_ha->ccb_info[i].ccb_dma_handle =
294 pm8001_ha->memoryMap.region[CCB_MEM].phys_addr +
295 i * sizeof(struct pm8001_ccb_info);
296 pm8001_ha->ccb_info[i].task = NULL;
297 pm8001_ha->ccb_info[i].ccb_tag = 0xffffffff;
298 pm8001_ha->ccb_info[i].device = NULL;
299 ++pm8001_ha->tags_num;
300 }
301 pm8001_ha->flags = PM8001F_INIT_TIME;
302 /* Initialize tags */
303 pm8001_tag_init(pm8001_ha);
304 return 0;
305 err_out:
306 return 1;
307 }
308
309 /**
310 * pm8001_ioremap - remap the pci high physical address to kernal virtual
311 * address so that we can access them.
312 * @pm8001_ha:our hba structure.
313 */
pm8001_ioremap(struct pm8001_hba_info * pm8001_ha)314 static int pm8001_ioremap(struct pm8001_hba_info *pm8001_ha)
315 {
316 u32 bar;
317 u32 logicalBar = 0;
318 struct pci_dev *pdev;
319
320 pdev = pm8001_ha->pdev;
321 /* map pci mem (PMC pci base 0-3)*/
322 for (bar = 0; bar < 6; bar++) {
323 /*
324 ** logical BARs for SPC:
325 ** bar 0 and 1 - logical BAR0
326 ** bar 2 and 3 - logical BAR1
327 ** bar4 - logical BAR2
328 ** bar5 - logical BAR3
329 ** Skip the appropriate assignments:
330 */
331 if ((bar == 1) || (bar == 3))
332 continue;
333 if (pci_resource_flags(pdev, bar) & IORESOURCE_MEM) {
334 pm8001_ha->io_mem[logicalBar].membase =
335 pci_resource_start(pdev, bar);
336 pm8001_ha->io_mem[logicalBar].membase &=
337 (u32)PCI_BASE_ADDRESS_MEM_MASK;
338 pm8001_ha->io_mem[logicalBar].memsize =
339 pci_resource_len(pdev, bar);
340 pm8001_ha->io_mem[logicalBar].memvirtaddr =
341 ioremap(pm8001_ha->io_mem[logicalBar].membase,
342 pm8001_ha->io_mem[logicalBar].memsize);
343 PM8001_INIT_DBG(pm8001_ha,
344 pm8001_printk("PCI: bar %d, logicalBar %d "
345 "virt_addr=%lx,len=%d\n", bar, logicalBar,
346 (unsigned long)
347 pm8001_ha->io_mem[logicalBar].memvirtaddr,
348 pm8001_ha->io_mem[logicalBar].memsize));
349 } else {
350 pm8001_ha->io_mem[logicalBar].membase = 0;
351 pm8001_ha->io_mem[logicalBar].memsize = 0;
352 pm8001_ha->io_mem[logicalBar].memvirtaddr = 0;
353 }
354 logicalBar++;
355 }
356 return 0;
357 }
358
359 /**
360 * pm8001_pci_alloc - initialize our ha card structure
361 * @pdev: pci device.
362 * @ent: ent
363 * @shost: scsi host struct which has been initialized before.
364 */
365 static struct pm8001_hba_info *__devinit
pm8001_pci_alloc(struct pci_dev * pdev,u32 chip_id,struct Scsi_Host * shost)366 pm8001_pci_alloc(struct pci_dev *pdev, u32 chip_id, struct Scsi_Host *shost)
367 {
368 struct pm8001_hba_info *pm8001_ha;
369 struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
370
371
372 pm8001_ha = sha->lldd_ha;
373 if (!pm8001_ha)
374 return NULL;
375
376 pm8001_ha->pdev = pdev;
377 pm8001_ha->dev = &pdev->dev;
378 pm8001_ha->chip_id = chip_id;
379 pm8001_ha->chip = &pm8001_chips[pm8001_ha->chip_id];
380 pm8001_ha->irq = pdev->irq;
381 pm8001_ha->sas = sha;
382 pm8001_ha->shost = shost;
383 pm8001_ha->id = pm8001_id++;
384 pm8001_ha->logging_level = 0x01;
385 sprintf(pm8001_ha->name, "%s%d", DRV_NAME, pm8001_ha->id);
386 #ifdef PM8001_USE_TASKLET
387 tasklet_init(&pm8001_ha->tasklet, pm8001_tasklet,
388 (unsigned long)pm8001_ha);
389 #endif
390 pm8001_ioremap(pm8001_ha);
391 if (!pm8001_alloc(pm8001_ha))
392 return pm8001_ha;
393 pm8001_free(pm8001_ha);
394 return NULL;
395 }
396
397 /**
398 * pci_go_44 - pm8001 specified, its DMA is 44 bit rather than 64 bit
399 * @pdev: pci device.
400 */
pci_go_44(struct pci_dev * pdev)401 static int pci_go_44(struct pci_dev *pdev)
402 {
403 int rc;
404
405 if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(44))) {
406 rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(44));
407 if (rc) {
408 rc = pci_set_consistent_dma_mask(pdev,
409 DMA_BIT_MASK(32));
410 if (rc) {
411 dev_printk(KERN_ERR, &pdev->dev,
412 "44-bit DMA enable failed\n");
413 return rc;
414 }
415 }
416 } else {
417 rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
418 if (rc) {
419 dev_printk(KERN_ERR, &pdev->dev,
420 "32-bit DMA enable failed\n");
421 return rc;
422 }
423 rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
424 if (rc) {
425 dev_printk(KERN_ERR, &pdev->dev,
426 "32-bit consistent DMA enable failed\n");
427 return rc;
428 }
429 }
430 return rc;
431 }
432
433 /**
434 * pm8001_prep_sas_ha_init - allocate memory in general hba struct && init them.
435 * @shost: scsi host which has been allocated outside.
436 * @chip_info: our ha struct.
437 */
pm8001_prep_sas_ha_init(struct Scsi_Host * shost,const struct pm8001_chip_info * chip_info)438 static int __devinit pm8001_prep_sas_ha_init(struct Scsi_Host * shost,
439 const struct pm8001_chip_info *chip_info)
440 {
441 int phy_nr, port_nr;
442 struct asd_sas_phy **arr_phy;
443 struct asd_sas_port **arr_port;
444 struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
445
446 phy_nr = chip_info->n_phy;
447 port_nr = phy_nr;
448 memset(sha, 0x00, sizeof(*sha));
449 arr_phy = kcalloc(phy_nr, sizeof(void *), GFP_KERNEL);
450 if (!arr_phy)
451 goto exit;
452 arr_port = kcalloc(port_nr, sizeof(void *), GFP_KERNEL);
453 if (!arr_port)
454 goto exit_free2;
455
456 sha->sas_phy = arr_phy;
457 sha->sas_port = arr_port;
458 sha->lldd_ha = kzalloc(sizeof(struct pm8001_hba_info), GFP_KERNEL);
459 if (!sha->lldd_ha)
460 goto exit_free1;
461
462 shost->transportt = pm8001_stt;
463 shost->max_id = PM8001_MAX_DEVICES;
464 shost->max_lun = 8;
465 shost->max_channel = 0;
466 shost->unique_id = pm8001_id;
467 shost->max_cmd_len = 16;
468 shost->can_queue = PM8001_CAN_QUEUE;
469 shost->cmd_per_lun = 32;
470 return 0;
471 exit_free1:
472 kfree(arr_port);
473 exit_free2:
474 kfree(arr_phy);
475 exit:
476 return -1;
477 }
478
479 /**
480 * pm8001_post_sas_ha_init - initialize general hba struct defined in libsas
481 * @shost: scsi host which has been allocated outside
482 * @chip_info: our ha struct.
483 */
pm8001_post_sas_ha_init(struct Scsi_Host * shost,const struct pm8001_chip_info * chip_info)484 static void __devinit pm8001_post_sas_ha_init(struct Scsi_Host *shost,
485 const struct pm8001_chip_info *chip_info)
486 {
487 int i = 0;
488 struct pm8001_hba_info *pm8001_ha;
489 struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
490
491 pm8001_ha = sha->lldd_ha;
492 for (i = 0; i < chip_info->n_phy; i++) {
493 sha->sas_phy[i] = &pm8001_ha->phy[i].sas_phy;
494 sha->sas_port[i] = &pm8001_ha->port[i].sas_port;
495 }
496 sha->sas_ha_name = DRV_NAME;
497 sha->dev = pm8001_ha->dev;
498
499 sha->lldd_module = THIS_MODULE;
500 sha->sas_addr = &pm8001_ha->sas_addr[0];
501 sha->num_phys = chip_info->n_phy;
502 sha->lldd_max_execute_num = 1;
503 sha->lldd_queue_size = PM8001_CAN_QUEUE;
504 sha->core.shost = shost;
505 }
506
507 /**
508 * pm8001_init_sas_add - initialize sas address
509 * @chip_info: our ha struct.
510 *
511 * Currently we just set the fixed SAS address to our HBA,for manufacture,
512 * it should read from the EEPROM
513 */
pm8001_init_sas_add(struct pm8001_hba_info * pm8001_ha)514 static void pm8001_init_sas_add(struct pm8001_hba_info *pm8001_ha)
515 {
516 u8 i;
517 #ifdef PM8001_READ_VPD
518 DECLARE_COMPLETION_ONSTACK(completion);
519 struct pm8001_ioctl_payload payload;
520 pm8001_ha->nvmd_completion = &completion;
521 payload.minor_function = 0;
522 payload.length = 128;
523 payload.func_specific = kzalloc(128, GFP_KERNEL);
524 PM8001_CHIP_DISP->get_nvmd_req(pm8001_ha, &payload);
525 wait_for_completion(&completion);
526 for (i = 0; i < pm8001_ha->chip->n_phy; i++) {
527 memcpy(&pm8001_ha->phy[i].dev_sas_addr, pm8001_ha->sas_addr,
528 SAS_ADDR_SIZE);
529 PM8001_INIT_DBG(pm8001_ha,
530 pm8001_printk("phy %d sas_addr = %016llx \n", i,
531 pm8001_ha->phy[i].dev_sas_addr));
532 }
533 #else
534 for (i = 0; i < pm8001_ha->chip->n_phy; i++) {
535 pm8001_ha->phy[i].dev_sas_addr = 0x50010c600047f9d0ULL;
536 pm8001_ha->phy[i].dev_sas_addr =
537 cpu_to_be64((u64)
538 (*(u64 *)&pm8001_ha->phy[i].dev_sas_addr));
539 }
540 memcpy(pm8001_ha->sas_addr, &pm8001_ha->phy[0].dev_sas_addr,
541 SAS_ADDR_SIZE);
542 #endif
543 }
544
545 #ifdef PM8001_USE_MSIX
546 /**
547 * pm8001_setup_msix - enable MSI-X interrupt
548 * @chip_info: our ha struct.
549 * @irq_handler: irq_handler
550 */
pm8001_setup_msix(struct pm8001_hba_info * pm8001_ha,irq_handler_t irq_handler)551 static u32 pm8001_setup_msix(struct pm8001_hba_info *pm8001_ha,
552 irq_handler_t irq_handler)
553 {
554 u32 i = 0, j = 0;
555 u32 number_of_intr = 1;
556 int flag = 0;
557 u32 max_entry;
558 int rc;
559 max_entry = sizeof(pm8001_ha->msix_entries) /
560 sizeof(pm8001_ha->msix_entries[0]);
561 flag |= IRQF_DISABLED;
562 for (i = 0; i < max_entry ; i++)
563 pm8001_ha->msix_entries[i].entry = i;
564 rc = pci_enable_msix(pm8001_ha->pdev, pm8001_ha->msix_entries,
565 number_of_intr);
566 pm8001_ha->number_of_intr = number_of_intr;
567 if (!rc) {
568 for (i = 0; i < number_of_intr; i++) {
569 if (request_irq(pm8001_ha->msix_entries[i].vector,
570 irq_handler, flag, DRV_NAME,
571 SHOST_TO_SAS_HA(pm8001_ha->shost))) {
572 for (j = 0; j < i; j++)
573 free_irq(
574 pm8001_ha->msix_entries[j].vector,
575 SHOST_TO_SAS_HA(pm8001_ha->shost));
576 pci_disable_msix(pm8001_ha->pdev);
577 break;
578 }
579 }
580 }
581 return rc;
582 }
583 #endif
584
585 /**
586 * pm8001_request_irq - register interrupt
587 * @chip_info: our ha struct.
588 */
pm8001_request_irq(struct pm8001_hba_info * pm8001_ha)589 static u32 pm8001_request_irq(struct pm8001_hba_info *pm8001_ha)
590 {
591 struct pci_dev *pdev;
592 irq_handler_t irq_handler = pm8001_interrupt;
593 int rc;
594
595 pdev = pm8001_ha->pdev;
596
597 #ifdef PM8001_USE_MSIX
598 if (pci_find_capability(pdev, PCI_CAP_ID_MSIX))
599 return pm8001_setup_msix(pm8001_ha, irq_handler);
600 else
601 goto intx;
602 #endif
603
604 intx:
605 /* initialize the INT-X interrupt */
606 rc = request_irq(pdev->irq, irq_handler, IRQF_SHARED, DRV_NAME,
607 SHOST_TO_SAS_HA(pm8001_ha->shost));
608 return rc;
609 }
610
611 /**
612 * pm8001_pci_probe - probe supported device
613 * @pdev: pci device which kernel has been prepared for.
614 * @ent: pci device id
615 *
616 * This function is the main initialization function, when register a new
617 * pci driver it is invoked, all struct an hardware initilization should be done
618 * here, also, register interrupt
619 */
pm8001_pci_probe(struct pci_dev * pdev,const struct pci_device_id * ent)620 static int __devinit pm8001_pci_probe(struct pci_dev *pdev,
621 const struct pci_device_id *ent)
622 {
623 unsigned int rc;
624 u32 pci_reg;
625 struct pm8001_hba_info *pm8001_ha;
626 struct Scsi_Host *shost = NULL;
627 const struct pm8001_chip_info *chip;
628
629 dev_printk(KERN_INFO, &pdev->dev,
630 "pm8001: driver version %s\n", DRV_VERSION);
631 rc = pci_enable_device(pdev);
632 if (rc)
633 goto err_out_enable;
634 pci_set_master(pdev);
635 /*
636 * Enable pci slot busmaster by setting pci command register.
637 * This is required by FW for Cyclone card.
638 */
639
640 pci_read_config_dword(pdev, PCI_COMMAND, &pci_reg);
641 pci_reg |= 0x157;
642 pci_write_config_dword(pdev, PCI_COMMAND, pci_reg);
643 rc = pci_request_regions(pdev, DRV_NAME);
644 if (rc)
645 goto err_out_disable;
646 rc = pci_go_44(pdev);
647 if (rc)
648 goto err_out_regions;
649
650 shost = scsi_host_alloc(&pm8001_sht, sizeof(void *));
651 if (!shost) {
652 rc = -ENOMEM;
653 goto err_out_regions;
654 }
655 chip = &pm8001_chips[ent->driver_data];
656 SHOST_TO_SAS_HA(shost) =
657 kzalloc(sizeof(struct sas_ha_struct), GFP_KERNEL);
658 if (!SHOST_TO_SAS_HA(shost)) {
659 rc = -ENOMEM;
660 goto err_out_free_host;
661 }
662
663 rc = pm8001_prep_sas_ha_init(shost, chip);
664 if (rc) {
665 rc = -ENOMEM;
666 goto err_out_free;
667 }
668 pci_set_drvdata(pdev, SHOST_TO_SAS_HA(shost));
669 pm8001_ha = pm8001_pci_alloc(pdev, chip_8001, shost);
670 if (!pm8001_ha) {
671 rc = -ENOMEM;
672 goto err_out_free;
673 }
674 list_add_tail(&pm8001_ha->list, &hba_list);
675 PM8001_CHIP_DISP->chip_soft_rst(pm8001_ha, 0x252acbcd);
676 rc = PM8001_CHIP_DISP->chip_init(pm8001_ha);
677 if (rc)
678 goto err_out_ha_free;
679
680 rc = scsi_add_host(shost, &pdev->dev);
681 if (rc)
682 goto err_out_ha_free;
683 rc = pm8001_request_irq(pm8001_ha);
684 if (rc)
685 goto err_out_shost;
686
687 PM8001_CHIP_DISP->interrupt_enable(pm8001_ha);
688 pm8001_init_sas_add(pm8001_ha);
689 pm8001_post_sas_ha_init(shost, chip);
690 rc = sas_register_ha(SHOST_TO_SAS_HA(shost));
691 if (rc)
692 goto err_out_shost;
693 scsi_scan_host(pm8001_ha->shost);
694 return 0;
695
696 err_out_shost:
697 scsi_remove_host(pm8001_ha->shost);
698 err_out_ha_free:
699 pm8001_free(pm8001_ha);
700 err_out_free:
701 kfree(SHOST_TO_SAS_HA(shost));
702 err_out_free_host:
703 kfree(shost);
704 err_out_regions:
705 pci_release_regions(pdev);
706 err_out_disable:
707 pci_disable_device(pdev);
708 err_out_enable:
709 return rc;
710 }
711
pm8001_pci_remove(struct pci_dev * pdev)712 static void __devexit pm8001_pci_remove(struct pci_dev *pdev)
713 {
714 struct sas_ha_struct *sha = pci_get_drvdata(pdev);
715 struct pm8001_hba_info *pm8001_ha;
716 int i;
717 pm8001_ha = sha->lldd_ha;
718 pci_set_drvdata(pdev, NULL);
719 sas_unregister_ha(sha);
720 sas_remove_host(pm8001_ha->shost);
721 list_del(&pm8001_ha->list);
722 scsi_remove_host(pm8001_ha->shost);
723 PM8001_CHIP_DISP->interrupt_disable(pm8001_ha);
724 PM8001_CHIP_DISP->chip_soft_rst(pm8001_ha, 0x252acbcd);
725
726 #ifdef PM8001_USE_MSIX
727 for (i = 0; i < pm8001_ha->number_of_intr; i++)
728 synchronize_irq(pm8001_ha->msix_entries[i].vector);
729 for (i = 0; i < pm8001_ha->number_of_intr; i++)
730 free_irq(pm8001_ha->msix_entries[i].vector, sha);
731 pci_disable_msix(pdev);
732 #else
733 free_irq(pm8001_ha->irq, sha);
734 #endif
735 #ifdef PM8001_USE_TASKLET
736 tasklet_kill(&pm8001_ha->tasklet);
737 #endif
738 pm8001_free(pm8001_ha);
739 kfree(sha->sas_phy);
740 kfree(sha->sas_port);
741 kfree(sha);
742 pci_release_regions(pdev);
743 pci_disable_device(pdev);
744 }
745
746 /**
747 * pm8001_pci_suspend - power management suspend main entry point
748 * @pdev: PCI device struct
749 * @state: PM state change to (usually PCI_D3)
750 *
751 * Returns 0 success, anything else error.
752 */
pm8001_pci_suspend(struct pci_dev * pdev,pm_message_t state)753 static int pm8001_pci_suspend(struct pci_dev *pdev, pm_message_t state)
754 {
755 struct sas_ha_struct *sha = pci_get_drvdata(pdev);
756 struct pm8001_hba_info *pm8001_ha;
757 int i , pos;
758 u32 device_state;
759 pm8001_ha = sha->lldd_ha;
760 flush_workqueue(pm8001_wq);
761 scsi_block_requests(pm8001_ha->shost);
762 pos = pci_find_capability(pdev, PCI_CAP_ID_PM);
763 if (pos == 0) {
764 printk(KERN_ERR " PCI PM not supported\n");
765 return -ENODEV;
766 }
767 PM8001_CHIP_DISP->interrupt_disable(pm8001_ha);
768 PM8001_CHIP_DISP->chip_soft_rst(pm8001_ha, 0x252acbcd);
769 #ifdef PM8001_USE_MSIX
770 for (i = 0; i < pm8001_ha->number_of_intr; i++)
771 synchronize_irq(pm8001_ha->msix_entries[i].vector);
772 for (i = 0; i < pm8001_ha->number_of_intr; i++)
773 free_irq(pm8001_ha->msix_entries[i].vector, sha);
774 pci_disable_msix(pdev);
775 #else
776 free_irq(pm8001_ha->irq, sha);
777 #endif
778 #ifdef PM8001_USE_TASKLET
779 tasklet_kill(&pm8001_ha->tasklet);
780 #endif
781 device_state = pci_choose_state(pdev, state);
782 pm8001_printk("pdev=0x%p, slot=%s, entering "
783 "operating state [D%d]\n", pdev,
784 pm8001_ha->name, device_state);
785 pci_save_state(pdev);
786 pci_disable_device(pdev);
787 pci_set_power_state(pdev, device_state);
788 return 0;
789 }
790
791 /**
792 * pm8001_pci_resume - power management resume main entry point
793 * @pdev: PCI device struct
794 *
795 * Returns 0 success, anything else error.
796 */
pm8001_pci_resume(struct pci_dev * pdev)797 static int pm8001_pci_resume(struct pci_dev *pdev)
798 {
799 struct sas_ha_struct *sha = pci_get_drvdata(pdev);
800 struct pm8001_hba_info *pm8001_ha;
801 int rc;
802 u32 device_state;
803 pm8001_ha = sha->lldd_ha;
804 device_state = pdev->current_state;
805
806 pm8001_printk("pdev=0x%p, slot=%s, resuming from previous "
807 "operating state [D%d]\n", pdev, pm8001_ha->name, device_state);
808
809 pci_set_power_state(pdev, PCI_D0);
810 pci_enable_wake(pdev, PCI_D0, 0);
811 pci_restore_state(pdev);
812 rc = pci_enable_device(pdev);
813 if (rc) {
814 pm8001_printk("slot=%s Enable device failed during resume\n",
815 pm8001_ha->name);
816 goto err_out_enable;
817 }
818
819 pci_set_master(pdev);
820 rc = pci_go_44(pdev);
821 if (rc)
822 goto err_out_disable;
823
824 PM8001_CHIP_DISP->chip_soft_rst(pm8001_ha, 0x252acbcd);
825 rc = PM8001_CHIP_DISP->chip_init(pm8001_ha);
826 if (rc)
827 goto err_out_disable;
828 PM8001_CHIP_DISP->interrupt_disable(pm8001_ha);
829 rc = pm8001_request_irq(pm8001_ha);
830 if (rc)
831 goto err_out_disable;
832 #ifdef PM8001_USE_TASKLET
833 tasklet_init(&pm8001_ha->tasklet, pm8001_tasklet,
834 (unsigned long)pm8001_ha);
835 #endif
836 PM8001_CHIP_DISP->interrupt_enable(pm8001_ha);
837 scsi_unblock_requests(pm8001_ha->shost);
838 return 0;
839
840 err_out_disable:
841 scsi_remove_host(pm8001_ha->shost);
842 pci_disable_device(pdev);
843 err_out_enable:
844 return rc;
845 }
846
847 static struct pci_device_id __devinitdata pm8001_pci_table[] = {
848 {
849 PCI_VDEVICE(PMC_Sierra, 0x8001), chip_8001
850 },
851 {
852 PCI_DEVICE(0x117c, 0x0042),
853 .driver_data = chip_8001
854 },
855 {} /* terminate list */
856 };
857
858 static struct pci_driver pm8001_pci_driver = {
859 .name = DRV_NAME,
860 .id_table = pm8001_pci_table,
861 .probe = pm8001_pci_probe,
862 .remove = __devexit_p(pm8001_pci_remove),
863 .suspend = pm8001_pci_suspend,
864 .resume = pm8001_pci_resume,
865 };
866
867 /**
868 * pm8001_init - initialize scsi transport template
869 */
pm8001_init(void)870 static int __init pm8001_init(void)
871 {
872 int rc = -ENOMEM;
873
874 pm8001_wq = alloc_workqueue("pm8001", 0, 0);
875 if (!pm8001_wq)
876 goto err;
877
878 pm8001_id = 0;
879 pm8001_stt = sas_domain_attach_transport(&pm8001_transport_ops);
880 if (!pm8001_stt)
881 goto err_wq;
882 rc = pci_register_driver(&pm8001_pci_driver);
883 if (rc)
884 goto err_tp;
885 return 0;
886
887 err_tp:
888 sas_release_transport(pm8001_stt);
889 err_wq:
890 destroy_workqueue(pm8001_wq);
891 err:
892 return rc;
893 }
894
pm8001_exit(void)895 static void __exit pm8001_exit(void)
896 {
897 pci_unregister_driver(&pm8001_pci_driver);
898 sas_release_transport(pm8001_stt);
899 destroy_workqueue(pm8001_wq);
900 }
901
902 module_init(pm8001_init);
903 module_exit(pm8001_exit);
904
905 MODULE_AUTHOR("Jack Wang <jack_wang@usish.com>");
906 MODULE_DESCRIPTION("PMC-Sierra PM8001 SAS/SATA controller driver");
907 MODULE_VERSION(DRV_VERSION);
908 MODULE_LICENSE("GPL");
909 MODULE_DEVICE_TABLE(pci, pm8001_pci_table);
910
911