1 /*
2  *
3  * Alchemy Au1x00 ethernet driver include file
4  *
5  * Author: Pete Popov <ppopov@mvista.com>
6  *
7  * Copyright 2001 MontaVista Software Inc.
8  *
9  * ########################################################################
10  *
11  *  This program is free software; you can distribute it and/or modify it
12  *  under the terms of the GNU General Public License (Version 2) as
13  *  published by the Free Software Foundation.
14  *
15  *  This program is distributed in the hope it will be useful, but WITHOUT
16  *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
17  *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
18  *  for more details.
19  *
20  *  You should have received a copy of the GNU General Public License along
21  *  with this program; if not, write to the Free Software Foundation, Inc.,
22  *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
23  *
24  * ########################################################################
25  *
26  *
27  */
28 
29 
30 #define MAC_IOSIZE 0x10000
31 #define NUM_RX_DMA 4       /* Au1x00 has 4 rx hardware descriptors */
32 #define NUM_TX_DMA 4       /* Au1x00 has 4 tx hardware descriptors */
33 
34 #define NUM_RX_BUFFS 4
35 #define NUM_TX_BUFFS 4
36 #define MAX_BUF_SIZE 2048
37 
38 #define ETH_TX_TIMEOUT (HZ/4)
39 #define MAC_MIN_PKT_SIZE 64
40 
41 #define MULTICAST_FILTER_LIMIT 64
42 
43 /*
44  * Data Buffer Descriptor. Data buffers must be aligned on 32 byte
45  * boundary for both, receive and transmit.
46  */
47 struct db_dest {
48 	struct db_dest *pnext;
49 	u32 *vaddr;
50 	dma_addr_t dma_addr;
51 };
52 
53 /*
54  * The transmit and receive descriptors are memory
55  * mapped registers.
56  */
57 struct tx_dma {
58 	u32 status;
59 	u32 buff_stat;
60 	u32 len;
61 	u32 pad;
62 };
63 
64 struct rx_dma {
65 	u32 status;
66 	u32 buff_stat;
67 	u32 pad[2];
68 };
69 
70 
71 /*
72  * MAC control registers, memory mapped.
73  */
74 struct mac_reg {
75 	u32 control;
76 	u32 mac_addr_high;
77 	u32 mac_addr_low;
78 	u32 multi_hash_high;
79 	u32 multi_hash_low;
80 	u32 mii_control;
81 	u32 mii_data;
82 	u32 flow_control;
83 	u32 vlan1_tag;
84 	u32 vlan2_tag;
85 };
86 
87 
88 struct au1000_private {
89 	struct db_dest *pDBfree;
90 	struct db_dest db[NUM_RX_BUFFS+NUM_TX_BUFFS];
91 	struct rx_dma *rx_dma_ring[NUM_RX_DMA];
92 	struct tx_dma *tx_dma_ring[NUM_TX_DMA];
93 	struct db_dest *rx_db_inuse[NUM_RX_DMA];
94 	struct db_dest *tx_db_inuse[NUM_TX_DMA];
95 	u32 rx_head;
96 	u32 tx_head;
97 	u32 tx_tail;
98 	u32 tx_full;
99 
100 	int mac_id;
101 
102 	int mac_enabled;       /* whether MAC is currently enabled and running
103 				* (req. for mdio)
104 				*/
105 
106 	int old_link;          /* used by au1000_adjust_link */
107 	int old_speed;
108 	int old_duplex;
109 
110 	struct phy_device *phy_dev;
111 	struct mii_bus *mii_bus;
112 
113 	/* PHY configuration */
114 	int phy_static_config;
115 	int phy_search_highest_addr;
116 	int phy1_search_mac0;
117 
118 	int phy_addr;
119 	int phy_busid;
120 	int phy_irq;
121 
122 	/* These variables are just for quick access
123 	 * to certain regs addresses.
124 	 */
125 	struct mac_reg *mac;  /* mac registers                      */
126 	u32 *enable;     /* address of MAC Enable Register     */
127 
128 	u32 vaddr;                /* virtual address of rx/tx buffers   */
129 	dma_addr_t dma_addr;      /* dma address of rx/tx buffers       */
130 
131 	spinlock_t lock;       /* Serialise access to device */
132 
133 	u32 msg_enable;
134 };
135