1 /*
2 Driver for Spase SP8870 demodulator
3
4 Copyright (C) 1999 Juergen Peitz
5
6 This program is free software; you can redistribute it and/or modify
7 it under the terms of the GNU General Public License as published by
8 the Free Software Foundation; either version 2 of the License, or
9 (at your option) any later version.
10
11 This program is distributed in the hope that it will be useful,
12 but WITHOUT ANY WARRANTY; without even the implied warranty of
13 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14
15 GNU General Public License for more details.
16
17 You should have received a copy of the GNU General Public License
18 along with this program; if not, write to the Free Software
19 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
20
21 */
22 /*
23 * This driver needs external firmware. Please use the command
24 * "<kerneldir>/Documentation/dvb/get_dvb_firmware alps_tdlb7" to
25 * download/extract it, and then copy it to /usr/lib/hotplug/firmware
26 * or /lib/firmware (depending on configuration of firmware hotplug).
27 */
28 #define SP8870_DEFAULT_FIRMWARE "dvb-fe-sp8870.fw"
29
30 #include <linux/init.h>
31 #include <linux/module.h>
32 #include <linux/device.h>
33 #include <linux/firmware.h>
34 #include <linux/delay.h>
35 #include <linux/string.h>
36 #include <linux/slab.h>
37
38 #include "dvb_frontend.h"
39 #include "sp8870.h"
40
41
42 struct sp8870_state {
43
44 struct i2c_adapter* i2c;
45
46 const struct sp8870_config* config;
47
48 struct dvb_frontend frontend;
49
50 /* demodulator private data */
51 u8 initialised:1;
52 };
53
54 static int debug;
55 #define dprintk(args...) \
56 do { \
57 if (debug) printk(KERN_DEBUG "sp8870: " args); \
58 } while (0)
59
60 /* firmware size for sp8870 */
61 #define SP8870_FIRMWARE_SIZE 16382
62
63 /* starting point for firmware in file 'Sc_main.mc' */
64 #define SP8870_FIRMWARE_OFFSET 0x0A
65
sp8870_writereg(struct sp8870_state * state,u16 reg,u16 data)66 static int sp8870_writereg (struct sp8870_state* state, u16 reg, u16 data)
67 {
68 u8 buf [] = { reg >> 8, reg & 0xff, data >> 8, data & 0xff };
69 struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = buf, .len = 4 };
70 int err;
71
72 if ((err = i2c_transfer (state->i2c, &msg, 1)) != 1) {
73 dprintk ("%s: writereg error (err == %i, reg == 0x%02x, data == 0x%02x)\n", __func__, err, reg, data);
74 return -EREMOTEIO;
75 }
76
77 return 0;
78 }
79
sp8870_readreg(struct sp8870_state * state,u16 reg)80 static int sp8870_readreg (struct sp8870_state* state, u16 reg)
81 {
82 int ret;
83 u8 b0 [] = { reg >> 8 , reg & 0xff };
84 u8 b1 [] = { 0, 0 };
85 struct i2c_msg msg [] = { { .addr = state->config->demod_address, .flags = 0, .buf = b0, .len = 2 },
86 { .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = b1, .len = 2 } };
87
88 ret = i2c_transfer (state->i2c, msg, 2);
89
90 if (ret != 2) {
91 dprintk("%s: readreg error (ret == %i)\n", __func__, ret);
92 return -1;
93 }
94
95 return (b1[0] << 8 | b1[1]);
96 }
97
sp8870_firmware_upload(struct sp8870_state * state,const struct firmware * fw)98 static int sp8870_firmware_upload (struct sp8870_state* state, const struct firmware *fw)
99 {
100 struct i2c_msg msg;
101 const char *fw_buf = fw->data;
102 int fw_pos;
103 u8 tx_buf[255];
104 int tx_len;
105 int err = 0;
106
107 dprintk ("%s: ...\n", __func__);
108
109 if (fw->size < SP8870_FIRMWARE_SIZE + SP8870_FIRMWARE_OFFSET)
110 return -EINVAL;
111
112 // system controller stop
113 sp8870_writereg(state, 0x0F00, 0x0000);
114
115 // instruction RAM register hiword
116 sp8870_writereg(state, 0x8F08, ((SP8870_FIRMWARE_SIZE / 2) & 0xFFFF));
117
118 // instruction RAM MWR
119 sp8870_writereg(state, 0x8F0A, ((SP8870_FIRMWARE_SIZE / 2) >> 16));
120
121 // do firmware upload
122 fw_pos = SP8870_FIRMWARE_OFFSET;
123 while (fw_pos < SP8870_FIRMWARE_SIZE + SP8870_FIRMWARE_OFFSET){
124 tx_len = (fw_pos <= SP8870_FIRMWARE_SIZE + SP8870_FIRMWARE_OFFSET - 252) ? 252 : SP8870_FIRMWARE_SIZE + SP8870_FIRMWARE_OFFSET - fw_pos;
125 // write register 0xCF0A
126 tx_buf[0] = 0xCF;
127 tx_buf[1] = 0x0A;
128 memcpy(&tx_buf[2], fw_buf + fw_pos, tx_len);
129 msg.addr = state->config->demod_address;
130 msg.flags = 0;
131 msg.buf = tx_buf;
132 msg.len = tx_len + 2;
133 if ((err = i2c_transfer (state->i2c, &msg, 1)) != 1) {
134 printk("%s: firmware upload failed!\n", __func__);
135 printk ("%s: i2c error (err == %i)\n", __func__, err);
136 return err;
137 }
138 fw_pos += tx_len;
139 }
140
141 dprintk ("%s: done!\n", __func__);
142 return 0;
143 };
144
sp8870_microcontroller_stop(struct sp8870_state * state)145 static void sp8870_microcontroller_stop (struct sp8870_state* state)
146 {
147 sp8870_writereg(state, 0x0F08, 0x000);
148 sp8870_writereg(state, 0x0F09, 0x000);
149
150 // microcontroller STOP
151 sp8870_writereg(state, 0x0F00, 0x000);
152 }
153
sp8870_microcontroller_start(struct sp8870_state * state)154 static void sp8870_microcontroller_start (struct sp8870_state* state)
155 {
156 sp8870_writereg(state, 0x0F08, 0x000);
157 sp8870_writereg(state, 0x0F09, 0x000);
158
159 // microcontroller START
160 sp8870_writereg(state, 0x0F00, 0x001);
161 // not documented but if we don't read 0x0D01 out here
162 // we don't get a correct data valid signal
163 sp8870_readreg(state, 0x0D01);
164 }
165
sp8870_read_data_valid_signal(struct sp8870_state * state)166 static int sp8870_read_data_valid_signal(struct sp8870_state* state)
167 {
168 return (sp8870_readreg(state, 0x0D02) > 0);
169 }
170
configure_reg0xc05(struct dvb_frontend_parameters * p,u16 * reg0xc05)171 static int configure_reg0xc05 (struct dvb_frontend_parameters *p, u16 *reg0xc05)
172 {
173 int known_parameters = 1;
174
175 *reg0xc05 = 0x000;
176
177 switch (p->u.ofdm.constellation) {
178 case QPSK:
179 break;
180 case QAM_16:
181 *reg0xc05 |= (1 << 10);
182 break;
183 case QAM_64:
184 *reg0xc05 |= (2 << 10);
185 break;
186 case QAM_AUTO:
187 known_parameters = 0;
188 break;
189 default:
190 return -EINVAL;
191 };
192
193 switch (p->u.ofdm.hierarchy_information) {
194 case HIERARCHY_NONE:
195 break;
196 case HIERARCHY_1:
197 *reg0xc05 |= (1 << 7);
198 break;
199 case HIERARCHY_2:
200 *reg0xc05 |= (2 << 7);
201 break;
202 case HIERARCHY_4:
203 *reg0xc05 |= (3 << 7);
204 break;
205 case HIERARCHY_AUTO:
206 known_parameters = 0;
207 break;
208 default:
209 return -EINVAL;
210 };
211
212 switch (p->u.ofdm.code_rate_HP) {
213 case FEC_1_2:
214 break;
215 case FEC_2_3:
216 *reg0xc05 |= (1 << 3);
217 break;
218 case FEC_3_4:
219 *reg0xc05 |= (2 << 3);
220 break;
221 case FEC_5_6:
222 *reg0xc05 |= (3 << 3);
223 break;
224 case FEC_7_8:
225 *reg0xc05 |= (4 << 3);
226 break;
227 case FEC_AUTO:
228 known_parameters = 0;
229 break;
230 default:
231 return -EINVAL;
232 };
233
234 if (known_parameters)
235 *reg0xc05 |= (2 << 1); /* use specified parameters */
236 else
237 *reg0xc05 |= (1 << 1); /* enable autoprobing */
238
239 return 0;
240 }
241
sp8870_wake_up(struct sp8870_state * state)242 static int sp8870_wake_up(struct sp8870_state* state)
243 {
244 // enable TS output and interface pins
245 return sp8870_writereg(state, 0xC18, 0x00D);
246 }
247
sp8870_set_frontend_parameters(struct dvb_frontend * fe,struct dvb_frontend_parameters * p)248 static int sp8870_set_frontend_parameters (struct dvb_frontend* fe,
249 struct dvb_frontend_parameters *p)
250 {
251 struct sp8870_state* state = fe->demodulator_priv;
252 int err;
253 u16 reg0xc05;
254
255 if ((err = configure_reg0xc05(p, ®0xc05)))
256 return err;
257
258 // system controller stop
259 sp8870_microcontroller_stop(state);
260
261 // set tuner parameters
262 if (fe->ops.tuner_ops.set_params) {
263 fe->ops.tuner_ops.set_params(fe, p);
264 if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0);
265 }
266
267 // sample rate correction bit [23..17]
268 sp8870_writereg(state, 0x0319, 0x000A);
269
270 // sample rate correction bit [16..0]
271 sp8870_writereg(state, 0x031A, 0x0AAB);
272
273 // integer carrier offset
274 sp8870_writereg(state, 0x0309, 0x0400);
275
276 // fractional carrier offset
277 sp8870_writereg(state, 0x030A, 0x0000);
278
279 // filter for 6/7/8 Mhz channel
280 if (p->u.ofdm.bandwidth == BANDWIDTH_6_MHZ)
281 sp8870_writereg(state, 0x0311, 0x0002);
282 else if (p->u.ofdm.bandwidth == BANDWIDTH_7_MHZ)
283 sp8870_writereg(state, 0x0311, 0x0001);
284 else
285 sp8870_writereg(state, 0x0311, 0x0000);
286
287 // scan order: 2k first = 0x0000, 8k first = 0x0001
288 if (p->u.ofdm.transmission_mode == TRANSMISSION_MODE_2K)
289 sp8870_writereg(state, 0x0338, 0x0000);
290 else
291 sp8870_writereg(state, 0x0338, 0x0001);
292
293 sp8870_writereg(state, 0xc05, reg0xc05);
294
295 // read status reg in order to clear pending irqs
296 sp8870_readreg(state, 0x200);
297
298 // system controller start
299 sp8870_microcontroller_start(state);
300
301 return 0;
302 }
303
sp8870_init(struct dvb_frontend * fe)304 static int sp8870_init (struct dvb_frontend* fe)
305 {
306 struct sp8870_state* state = fe->demodulator_priv;
307 const struct firmware *fw = NULL;
308
309 sp8870_wake_up(state);
310 if (state->initialised) return 0;
311 state->initialised = 1;
312
313 dprintk ("%s\n", __func__);
314
315
316 /* request the firmware, this will block until someone uploads it */
317 printk("sp8870: waiting for firmware upload (%s)...\n", SP8870_DEFAULT_FIRMWARE);
318 if (state->config->request_firmware(fe, &fw, SP8870_DEFAULT_FIRMWARE)) {
319 printk("sp8870: no firmware upload (timeout or file not found?)\n");
320 return -EIO;
321 }
322
323 if (sp8870_firmware_upload(state, fw)) {
324 printk("sp8870: writing firmware to device failed\n");
325 release_firmware(fw);
326 return -EIO;
327 }
328 release_firmware(fw);
329 printk("sp8870: firmware upload complete\n");
330
331 /* enable TS output and interface pins */
332 sp8870_writereg(state, 0xc18, 0x00d);
333
334 // system controller stop
335 sp8870_microcontroller_stop(state);
336
337 // ADC mode
338 sp8870_writereg(state, 0x0301, 0x0003);
339
340 // Reed Solomon parity bytes passed to output
341 sp8870_writereg(state, 0x0C13, 0x0001);
342
343 // MPEG clock is suppressed if no valid data
344 sp8870_writereg(state, 0x0C14, 0x0001);
345
346 /* bit 0x010: enable data valid signal */
347 sp8870_writereg(state, 0x0D00, 0x010);
348 sp8870_writereg(state, 0x0D01, 0x000);
349
350 return 0;
351 }
352
sp8870_read_status(struct dvb_frontend * fe,fe_status_t * fe_status)353 static int sp8870_read_status (struct dvb_frontend* fe, fe_status_t * fe_status)
354 {
355 struct sp8870_state* state = fe->demodulator_priv;
356 int status;
357 int signal;
358
359 *fe_status = 0;
360
361 status = sp8870_readreg (state, 0x0200);
362 if (status < 0)
363 return -EIO;
364
365 signal = sp8870_readreg (state, 0x0303);
366 if (signal < 0)
367 return -EIO;
368
369 if (signal > 0x0F)
370 *fe_status |= FE_HAS_SIGNAL;
371 if (status & 0x08)
372 *fe_status |= FE_HAS_SYNC;
373 if (status & 0x04)
374 *fe_status |= FE_HAS_LOCK | FE_HAS_CARRIER | FE_HAS_VITERBI;
375
376 return 0;
377 }
378
sp8870_read_ber(struct dvb_frontend * fe,u32 * ber)379 static int sp8870_read_ber (struct dvb_frontend* fe, u32 * ber)
380 {
381 struct sp8870_state* state = fe->demodulator_priv;
382 int ret;
383 u32 tmp;
384
385 *ber = 0;
386
387 ret = sp8870_readreg(state, 0xC08);
388 if (ret < 0)
389 return -EIO;
390
391 tmp = ret & 0x3F;
392
393 ret = sp8870_readreg(state, 0xC07);
394 if (ret < 0)
395 return -EIO;
396
397 tmp = ret << 6;
398
399 if (tmp >= 0x3FFF0)
400 tmp = ~0;
401
402 *ber = tmp;
403
404 return 0;
405 }
406
sp8870_read_signal_strength(struct dvb_frontend * fe,u16 * signal)407 static int sp8870_read_signal_strength(struct dvb_frontend* fe, u16 * signal)
408 {
409 struct sp8870_state* state = fe->demodulator_priv;
410 int ret;
411 u16 tmp;
412
413 *signal = 0;
414
415 ret = sp8870_readreg (state, 0x306);
416 if (ret < 0)
417 return -EIO;
418
419 tmp = ret << 8;
420
421 ret = sp8870_readreg (state, 0x303);
422 if (ret < 0)
423 return -EIO;
424
425 tmp |= ret;
426
427 if (tmp)
428 *signal = 0xFFFF - tmp;
429
430 return 0;
431 }
432
sp8870_read_uncorrected_blocks(struct dvb_frontend * fe,u32 * ublocks)433 static int sp8870_read_uncorrected_blocks (struct dvb_frontend* fe, u32* ublocks)
434 {
435 struct sp8870_state* state = fe->demodulator_priv;
436 int ret;
437
438 *ublocks = 0;
439
440 ret = sp8870_readreg(state, 0xC0C);
441 if (ret < 0)
442 return -EIO;
443
444 if (ret == 0xFFFF)
445 ret = ~0;
446
447 *ublocks = ret;
448
449 return 0;
450 }
451
452 /* number of trials to recover from lockup */
453 #define MAXTRIALS 5
454 /* maximum checks for data valid signal */
455 #define MAXCHECKS 100
456
457 /* only for debugging: counter for detected lockups */
458 static int lockups;
459 /* only for debugging: counter for channel switches */
460 static int switches;
461
sp8870_set_frontend(struct dvb_frontend * fe,struct dvb_frontend_parameters * p)462 static int sp8870_set_frontend (struct dvb_frontend* fe, struct dvb_frontend_parameters *p)
463 {
464 struct sp8870_state* state = fe->demodulator_priv;
465
466 /*
467 The firmware of the sp8870 sometimes locks up after setting frontend parameters.
468 We try to detect this by checking the data valid signal.
469 If it is not set after MAXCHECKS we try to recover the lockup by setting
470 the frontend parameters again.
471 */
472
473 int err = 0;
474 int valid = 0;
475 int trials = 0;
476 int check_count = 0;
477
478 dprintk("%s: frequency = %i\n", __func__, p->frequency);
479
480 for (trials = 1; trials <= MAXTRIALS; trials++) {
481
482 if ((err = sp8870_set_frontend_parameters(fe, p)))
483 return err;
484
485 for (check_count = 0; check_count < MAXCHECKS; check_count++) {
486 // valid = ((sp8870_readreg(i2c, 0x0200) & 4) == 0);
487 valid = sp8870_read_data_valid_signal(state);
488 if (valid) {
489 dprintk("%s: delay = %i usec\n",
490 __func__, check_count * 10);
491 break;
492 }
493 udelay(10);
494 }
495 if (valid)
496 break;
497 }
498
499 if (!valid) {
500 printk("%s: firmware crash!!!!!!\n", __func__);
501 return -EIO;
502 }
503
504 if (debug) {
505 if (valid) {
506 if (trials > 1) {
507 printk("%s: firmware lockup!!!\n", __func__);
508 printk("%s: recovered after %i trial(s))\n", __func__, trials - 1);
509 lockups++;
510 }
511 }
512 switches++;
513 printk("%s: switches = %i lockups = %i\n", __func__, switches, lockups);
514 }
515
516 return 0;
517 }
518
sp8870_sleep(struct dvb_frontend * fe)519 static int sp8870_sleep(struct dvb_frontend* fe)
520 {
521 struct sp8870_state* state = fe->demodulator_priv;
522
523 // tristate TS output and disable interface pins
524 return sp8870_writereg(state, 0xC18, 0x000);
525 }
526
sp8870_get_tune_settings(struct dvb_frontend * fe,struct dvb_frontend_tune_settings * fesettings)527 static int sp8870_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* fesettings)
528 {
529 fesettings->min_delay_ms = 350;
530 fesettings->step_size = 0;
531 fesettings->max_drift = 0;
532 return 0;
533 }
534
sp8870_i2c_gate_ctrl(struct dvb_frontend * fe,int enable)535 static int sp8870_i2c_gate_ctrl(struct dvb_frontend* fe, int enable)
536 {
537 struct sp8870_state* state = fe->demodulator_priv;
538
539 if (enable) {
540 return sp8870_writereg(state, 0x206, 0x001);
541 } else {
542 return sp8870_writereg(state, 0x206, 0x000);
543 }
544 }
545
sp8870_release(struct dvb_frontend * fe)546 static void sp8870_release(struct dvb_frontend* fe)
547 {
548 struct sp8870_state* state = fe->demodulator_priv;
549 kfree(state);
550 }
551
552 static struct dvb_frontend_ops sp8870_ops;
553
sp8870_attach(const struct sp8870_config * config,struct i2c_adapter * i2c)554 struct dvb_frontend* sp8870_attach(const struct sp8870_config* config,
555 struct i2c_adapter* i2c)
556 {
557 struct sp8870_state* state = NULL;
558
559 /* allocate memory for the internal state */
560 state = kzalloc(sizeof(struct sp8870_state), GFP_KERNEL);
561 if (state == NULL) goto error;
562
563 /* setup the state */
564 state->config = config;
565 state->i2c = i2c;
566 state->initialised = 0;
567
568 /* check if the demod is there */
569 if (sp8870_readreg(state, 0x0200) < 0) goto error;
570
571 /* create dvb_frontend */
572 memcpy(&state->frontend.ops, &sp8870_ops, sizeof(struct dvb_frontend_ops));
573 state->frontend.demodulator_priv = state;
574 return &state->frontend;
575
576 error:
577 kfree(state);
578 return NULL;
579 }
580
581 static struct dvb_frontend_ops sp8870_ops = {
582
583 .info = {
584 .name = "Spase SP8870 DVB-T",
585 .type = FE_OFDM,
586 .frequency_min = 470000000,
587 .frequency_max = 860000000,
588 .frequency_stepsize = 166666,
589 .caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 |
590 FE_CAN_FEC_3_4 | FE_CAN_FEC_5_6 |
591 FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
592 FE_CAN_QPSK | FE_CAN_QAM_16 |
593 FE_CAN_QAM_64 | FE_CAN_QAM_AUTO |
594 FE_CAN_HIERARCHY_AUTO | FE_CAN_RECOVER
595 },
596
597 .release = sp8870_release,
598
599 .init = sp8870_init,
600 .sleep = sp8870_sleep,
601 .i2c_gate_ctrl = sp8870_i2c_gate_ctrl,
602
603 .set_frontend = sp8870_set_frontend,
604 .get_tune_settings = sp8870_get_tune_settings,
605
606 .read_status = sp8870_read_status,
607 .read_ber = sp8870_read_ber,
608 .read_signal_strength = sp8870_read_signal_strength,
609 .read_ucblocks = sp8870_read_uncorrected_blocks,
610 };
611
612 module_param(debug, int, 0644);
613 MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
614
615 MODULE_DESCRIPTION("Spase SP8870 DVB-T Demodulator driver");
616 MODULE_AUTHOR("Juergen Peitz");
617 MODULE_LICENSE("GPL");
618
619 EXPORT_SYMBOL(sp8870_attach);
620