1 /*
2 * bsbe1.h - ALPS BSBE1 tuner support
3 *
4 * This program is free software; you can redistribute it and/or
5 * modify it under the terms of the GNU General Public License
6 * as published by the Free Software Foundation; either version 2
7 * of the License, or (at your option) any later version.
8 *
9 *
10 * This program is distributed in the hope that it will be useful,
11 * but WITHOUT ANY WARRANTY; without even the implied warranty of
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 * GNU General Public License for more details.
14 *
15 *
16 * You should have received a copy of the GNU General Public License
17 * along with this program; if not, write to the Free Software
18 * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
19 * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
20 *
21 *
22 * the project's page is at http://www.linuxtv.org
23 */
24
25 #ifndef BSBE1_H
26 #define BSBE1_H
27
28 static u8 alps_bsbe1_inittab[] = {
29 0x01, 0x15, /* XTAL = 4MHz, VCO = 352 MHz */
30 0x02, 0x30, /* MCLK = 88 MHz */
31 0x03, 0x00, /* ACR output 0 */
32 0x04, 0x7d, /* F22FR = 0x7d, F22 = f_VCO / 128 / 0x7d = 22 kHz */
33 0x05, 0x05, /* I2CT = 0, SCLT = 1, SDAT = 1 */
34 0x06, 0x00, /* DAC output 0 */
35 0x08, 0x40, /* DiSEqC off, LNB power on OP2/LOCK pin on */
36 0x09, 0x00, /* FIFO */
37 0x0c, 0x51, /* OP1/OP0 normal, val = 1 (LNB power on) */
38 0x0d, 0x82, /* DC offset compensation = on, beta_agc1 = 2 */
39 0x0f, 0x92, /* AGC1R */
40 0x10, 0x34, /* AGC2O */
41 0x11, 0x84, /* TLSR */
42 0x12, 0xb9, /* CFD */
43 0x15, 0xc9, /* lock detector threshold */
44 0x28, 0x00, /* out imp: normal, type: parallel, FEC mode: QPSK */
45 0x33, 0xfc, /* RS control */
46 0x34, 0x93, /* count viterbi bit errors per 2E18 bytes */
47 0xff, 0xff
48 };
49
50
alps_bsbe1_set_symbol_rate(struct dvb_frontend * fe,u32 srate,u32 ratio)51 static int alps_bsbe1_set_symbol_rate(struct dvb_frontend* fe, u32 srate, u32 ratio)
52 {
53 u8 aclk = 0;
54 u8 bclk = 0;
55
56 if (srate < 1500000) { aclk = 0xb7; bclk = 0x47; }
57 else if (srate < 3000000) { aclk = 0xb7; bclk = 0x4b; }
58 else if (srate < 7000000) { aclk = 0xb7; bclk = 0x4f; }
59 else if (srate < 14000000) { aclk = 0xb7; bclk = 0x53; }
60 else if (srate < 30000000) { aclk = 0xb6; bclk = 0x53; }
61 else if (srate < 45000000) { aclk = 0xb4; bclk = 0x51; }
62
63 stv0299_writereg(fe, 0x13, aclk);
64 stv0299_writereg(fe, 0x14, bclk);
65 stv0299_writereg(fe, 0x1f, (ratio >> 16) & 0xff);
66 stv0299_writereg(fe, 0x20, (ratio >> 8) & 0xff);
67 stv0299_writereg(fe, 0x21, (ratio ) & 0xf0);
68
69 return 0;
70 }
71
alps_bsbe1_tuner_set_params(struct dvb_frontend * fe,struct dvb_frontend_parameters * params)72 static int alps_bsbe1_tuner_set_params(struct dvb_frontend* fe, struct dvb_frontend_parameters *params)
73 {
74 int ret;
75 u8 data[4];
76 u32 div;
77 struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = data, .len = sizeof(data) };
78 struct i2c_adapter *i2c = fe->tuner_priv;
79
80 if ((params->frequency < 950000) || (params->frequency > 2150000))
81 return -EINVAL;
82
83 div = params->frequency / 1000;
84 data[0] = (div >> 8) & 0x7f;
85 data[1] = div & 0xff;
86 data[2] = 0x80 | ((div & 0x18000) >> 10) | 0x1;
87 data[3] = 0xe0;
88
89 if (fe->ops.i2c_gate_ctrl)
90 fe->ops.i2c_gate_ctrl(fe, 1);
91 ret = i2c_transfer(i2c, &msg, 1);
92 return (ret != 1) ? -EIO : 0;
93 }
94
95 static struct stv0299_config alps_bsbe1_config = {
96 .demod_address = 0x68,
97 .inittab = alps_bsbe1_inittab,
98 .mclk = 88000000UL,
99 .invert = 1,
100 .skip_reinit = 0,
101 .min_delay_ms = 100,
102 .set_symbol_rate = alps_bsbe1_set_symbol_rate,
103 };
104
105 #endif
106