1 /*
2 * mc33880.c MC33880 high-side/low-side switch GPIO driver
3 * Copyright (c) 2009 Intel Corporation
4 *
5 * This program is free software; you can redistribute it and/or modify
6 * it under the terms of the GNU General Public License version 2 as
7 * published by the Free Software Foundation.
8 *
9 * This program is distributed in the hope that it will be useful,
10 * but WITHOUT ANY WARRANTY; without even the implied warranty of
11 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
12 * GNU General Public License for more details.
13 *
14 * You should have received a copy of the GNU General Public License
15 * along with this program; if not, write to the Free Software
16 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
17 */
18
19 /* Supports:
20 * Freescale MC33880 high-side/low-side switch
21 */
22
23 #include <linux/init.h>
24 #include <linux/mutex.h>
25 #include <linux/spi/spi.h>
26 #include <linux/spi/mc33880.h>
27 #include <linux/gpio.h>
28 #include <linux/slab.h>
29
30 #define DRIVER_NAME "mc33880"
31
32 /*
33 * Pin configurations, see MAX7301 datasheet page 6
34 */
35 #define PIN_CONFIG_MASK 0x03
36 #define PIN_CONFIG_IN_PULLUP 0x03
37 #define PIN_CONFIG_IN_WO_PULLUP 0x02
38 #define PIN_CONFIG_OUT 0x01
39
40 #define PIN_NUMBER 8
41
42
43 /*
44 * Some registers must be read back to modify.
45 * To save time we cache them here in memory
46 */
47 struct mc33880 {
48 struct mutex lock; /* protect from simultaneous accesses */
49 u8 port_config;
50 struct gpio_chip chip;
51 struct spi_device *spi;
52 };
53
mc33880_write_config(struct mc33880 * mc)54 static int mc33880_write_config(struct mc33880 *mc)
55 {
56 return spi_write(mc->spi, &mc->port_config, sizeof(mc->port_config));
57 }
58
59
__mc33880_set(struct mc33880 * mc,unsigned offset,int value)60 static int __mc33880_set(struct mc33880 *mc, unsigned offset, int value)
61 {
62 if (value)
63 mc->port_config |= 1 << offset;
64 else
65 mc->port_config &= ~(1 << offset);
66
67 return mc33880_write_config(mc);
68 }
69
70
mc33880_set(struct gpio_chip * chip,unsigned offset,int value)71 static void mc33880_set(struct gpio_chip *chip, unsigned offset, int value)
72 {
73 struct mc33880 *mc = container_of(chip, struct mc33880, chip);
74
75 mutex_lock(&mc->lock);
76
77 __mc33880_set(mc, offset, value);
78
79 mutex_unlock(&mc->lock);
80 }
81
mc33880_probe(struct spi_device * spi)82 static int __devinit mc33880_probe(struct spi_device *spi)
83 {
84 struct mc33880 *mc;
85 struct mc33880_platform_data *pdata;
86 int ret;
87
88 pdata = spi->dev.platform_data;
89 if (!pdata || !pdata->base) {
90 dev_dbg(&spi->dev, "incorrect or missing platform data\n");
91 return -EINVAL;
92 }
93
94 /*
95 * bits_per_word cannot be configured in platform data
96 */
97 spi->bits_per_word = 8;
98
99 ret = spi_setup(spi);
100 if (ret < 0)
101 return ret;
102
103 mc = kzalloc(sizeof(struct mc33880), GFP_KERNEL);
104 if (!mc)
105 return -ENOMEM;
106
107 mutex_init(&mc->lock);
108
109 dev_set_drvdata(&spi->dev, mc);
110
111 mc->spi = spi;
112
113 mc->chip.label = DRIVER_NAME,
114 mc->chip.set = mc33880_set;
115 mc->chip.base = pdata->base;
116 mc->chip.ngpio = PIN_NUMBER;
117 mc->chip.can_sleep = 1;
118 mc->chip.dev = &spi->dev;
119 mc->chip.owner = THIS_MODULE;
120
121 mc->port_config = 0x00;
122 /* write twice, because during initialisation the first setting
123 * is just for testing SPI communication, and the second is the
124 * "real" configuration
125 */
126 ret = mc33880_write_config(mc);
127 mc->port_config = 0x00;
128 if (!ret)
129 ret = mc33880_write_config(mc);
130
131 if (ret) {
132 printk(KERN_ERR "Failed writing to " DRIVER_NAME ": %d\n", ret);
133 goto exit_destroy;
134 }
135
136 ret = gpiochip_add(&mc->chip);
137 if (ret)
138 goto exit_destroy;
139
140 return ret;
141
142 exit_destroy:
143 dev_set_drvdata(&spi->dev, NULL);
144 mutex_destroy(&mc->lock);
145 kfree(mc);
146 return ret;
147 }
148
mc33880_remove(struct spi_device * spi)149 static int __devexit mc33880_remove(struct spi_device *spi)
150 {
151 struct mc33880 *mc;
152 int ret;
153
154 mc = dev_get_drvdata(&spi->dev);
155 if (mc == NULL)
156 return -ENODEV;
157
158 dev_set_drvdata(&spi->dev, NULL);
159
160 ret = gpiochip_remove(&mc->chip);
161 if (!ret) {
162 mutex_destroy(&mc->lock);
163 kfree(mc);
164 } else
165 dev_err(&spi->dev, "Failed to remove the GPIO controller: %d\n",
166 ret);
167
168 return ret;
169 }
170
171 static struct spi_driver mc33880_driver = {
172 .driver = {
173 .name = DRIVER_NAME,
174 .owner = THIS_MODULE,
175 },
176 .probe = mc33880_probe,
177 .remove = __devexit_p(mc33880_remove),
178 };
179
mc33880_init(void)180 static int __init mc33880_init(void)
181 {
182 return spi_register_driver(&mc33880_driver);
183 }
184 /* register after spi postcore initcall and before
185 * subsys initcalls that may rely on these GPIOs
186 */
187 subsys_initcall(mc33880_init);
188
mc33880_exit(void)189 static void __exit mc33880_exit(void)
190 {
191 spi_unregister_driver(&mc33880_driver);
192 }
193 module_exit(mc33880_exit);
194
195 MODULE_AUTHOR("Mocean Laboratories <info@mocean-labs.com>");
196 MODULE_LICENSE("GPL v2");
197
198