1 #ifndef _ASM_X86_PGTABLE_3LEVEL_H
2 #define _ASM_X86_PGTABLE_3LEVEL_H
3
4 /*
5 * Intel Physical Address Extension (PAE) Mode - three-level page
6 * tables on PPro+ CPUs.
7 *
8 * Copyright (C) 1999 Ingo Molnar <mingo@redhat.com>
9 */
10
11 #define pte_ERROR(e) \
12 printk("%s:%d: bad pte %p(%08lx%08lx).\n", \
13 __FILE__, __LINE__, &(e), (e).pte_high, (e).pte_low)
14 #define pmd_ERROR(e) \
15 printk("%s:%d: bad pmd %p(%016Lx).\n", \
16 __FILE__, __LINE__, &(e), pmd_val(e))
17 #define pgd_ERROR(e) \
18 printk("%s:%d: bad pgd %p(%016Lx).\n", \
19 __FILE__, __LINE__, &(e), pgd_val(e))
20
21 /* Rules for using set_pte: the pte being assigned *must* be
22 * either not present or in a state where the hardware will
23 * not attempt to update the pte. In places where this is
24 * not possible, use pte_get_and_clear to obtain the old pte
25 * value and then use set_pte to update it. -ben
26 */
native_set_pte(pte_t * ptep,pte_t pte)27 static inline void native_set_pte(pte_t *ptep, pte_t pte)
28 {
29 ptep->pte_high = pte.pte_high;
30 smp_wmb();
31 ptep->pte_low = pte.pte_low;
32 }
33
native_set_pte_atomic(pte_t * ptep,pte_t pte)34 static inline void native_set_pte_atomic(pte_t *ptep, pte_t pte)
35 {
36 set_64bit((unsigned long long *)(ptep), native_pte_val(pte));
37 }
38
native_set_pmd(pmd_t * pmdp,pmd_t pmd)39 static inline void native_set_pmd(pmd_t *pmdp, pmd_t pmd)
40 {
41 set_64bit((unsigned long long *)(pmdp), native_pmd_val(pmd));
42 }
43
native_set_pud(pud_t * pudp,pud_t pud)44 static inline void native_set_pud(pud_t *pudp, pud_t pud)
45 {
46 set_64bit((unsigned long long *)(pudp), native_pud_val(pud));
47 }
48
49 /*
50 * For PTEs and PDEs, we must clear the P-bit first when clearing a page table
51 * entry, so clear the bottom half first and enforce ordering with a compiler
52 * barrier.
53 */
native_pte_clear(struct mm_struct * mm,unsigned long addr,pte_t * ptep)54 static inline void native_pte_clear(struct mm_struct *mm, unsigned long addr,
55 pte_t *ptep)
56 {
57 ptep->pte_low = 0;
58 smp_wmb();
59 ptep->pte_high = 0;
60 }
61
native_pmd_clear(pmd_t * pmd)62 static inline void native_pmd_clear(pmd_t *pmd)
63 {
64 u32 *tmp = (u32 *)pmd;
65 *tmp = 0;
66 smp_wmb();
67 *(tmp + 1) = 0;
68 }
69
pud_clear(pud_t * pudp)70 static inline void pud_clear(pud_t *pudp)
71 {
72 set_pud(pudp, __pud(0));
73
74 /*
75 * According to Intel App note "TLBs, Paging-Structure Caches,
76 * and Their Invalidation", April 2007, document 317080-001,
77 * section 8.1: in PAE mode we explicitly have to flush the
78 * TLB via cr3 if the top-level pgd is changed...
79 *
80 * Currently all places where pud_clear() is called either have
81 * flush_tlb_mm() followed or don't need TLB flush (x86_64 code or
82 * pud_clear_bad()), so we don't need TLB flush here.
83 */
84 }
85
86 #ifdef CONFIG_SMP
native_ptep_get_and_clear(pte_t * ptep)87 static inline pte_t native_ptep_get_and_clear(pte_t *ptep)
88 {
89 pte_t res;
90
91 /* xchg acts as a barrier before the setting of the high bits */
92 res.pte_low = xchg(&ptep->pte_low, 0);
93 res.pte_high = ptep->pte_high;
94 ptep->pte_high = 0;
95
96 return res;
97 }
98 #else
99 #define native_ptep_get_and_clear(xp) native_local_ptep_get_and_clear(xp)
100 #endif
101
102 #ifdef CONFIG_SMP
103 union split_pmd {
104 struct {
105 u32 pmd_low;
106 u32 pmd_high;
107 };
108 pmd_t pmd;
109 };
native_pmdp_get_and_clear(pmd_t * pmdp)110 static inline pmd_t native_pmdp_get_and_clear(pmd_t *pmdp)
111 {
112 union split_pmd res, *orig = (union split_pmd *)pmdp;
113
114 /* xchg acts as a barrier before setting of the high bits */
115 res.pmd_low = xchg(&orig->pmd_low, 0);
116 res.pmd_high = orig->pmd_high;
117 orig->pmd_high = 0;
118
119 return res.pmd;
120 }
121 #else
122 #define native_pmdp_get_and_clear(xp) native_local_pmdp_get_and_clear(xp)
123 #endif
124
125 /*
126 * Bits 0, 6 and 7 are taken in the low part of the pte,
127 * put the 32 bits of offset into the high part.
128 */
129 #define pte_to_pgoff(pte) ((pte).pte_high)
130 #define pgoff_to_pte(off) \
131 ((pte_t) { { .pte_low = _PAGE_FILE, .pte_high = (off) } })
132 #define PTE_FILE_MAX_BITS 32
133
134 /* Encode and de-code a swap entry */
135 #define MAX_SWAPFILES_CHECK() BUILD_BUG_ON(MAX_SWAPFILES_SHIFT > 5)
136 #define __swp_type(x) (((x).val) & 0x1f)
137 #define __swp_offset(x) ((x).val >> 5)
138 #define __swp_entry(type, offset) ((swp_entry_t){(type) | (offset) << 5})
139 #define __pte_to_swp_entry(pte) ((swp_entry_t){ (pte).pte_high })
140 #define __swp_entry_to_pte(x) ((pte_t){ { .pte_high = (x).val } })
141
142 #endif /* _ASM_X86_PGTABLE_3LEVEL_H */
143