1 /*
2 * Support for 'mpc5200-simple-platform' compatible boards.
3 *
4 * Written by Marian Balakowicz <m8@semihalf.com>
5 * Copyright (C) 2007 Semihalf
6 *
7 * This program is free software; you can redistribute it and/or modify it
8 * under the terms of the GNU General Public License as published by the
9 * Free Software Foundation; either version 2 of the License, or (at your
10 * option) any later version.
11 *
12 * Description:
13 * This code implements support for a simple MPC52xx based boards which
14 * do not need a custom platform specific setup. Such boards are
15 * supported assuming the following:
16 *
17 * - GPIO pins are configured by the firmware,
18 * - CDM configuration (clocking) is setup correctly by firmware,
19 * - if the 'fsl,has-wdt' property is present in one of the
20 * gpt nodes, then it is safe to use such gpt to reset the board,
21 * - PCI is supported if enabled in the kernel configuration
22 * and if there is a PCI bus node defined in the device tree.
23 *
24 * Boards that are compatible with this generic platform support
25 * are listed in a 'board' table.
26 */
27
28 #undef DEBUG
29 #include <asm/time.h>
30 #include <asm/prom.h>
31 #include <asm/machdep.h>
32 #include <asm/mpc52xx.h>
33
34 /*
35 * Setup the architecture
36 */
mpc5200_simple_setup_arch(void)37 static void __init mpc5200_simple_setup_arch(void)
38 {
39 if (ppc_md.progress)
40 ppc_md.progress("mpc5200_simple_setup_arch()", 0);
41
42 /* Map important registers from the internal memory map */
43 mpc52xx_map_common_devices();
44
45 /* Some mpc5200 & mpc5200b related configuration */
46 mpc5200_setup_xlb_arbiter();
47
48 mpc52xx_setup_pci();
49 }
50
51 /* list of the supported boards */
52 static const char *board[] __initdata = {
53 "intercontrol,digsy-mtc",
54 "manroland,mucmc52",
55 "manroland,uc101",
56 "phytec,pcm030",
57 "phytec,pcm032",
58 "promess,motionpro",
59 "schindler,cm5200",
60 "tqc,tqm5200",
61 NULL
62 };
63
64 /*
65 * Called very early, MMU is off, device-tree isn't unflattened
66 */
mpc5200_simple_probe(void)67 static int __init mpc5200_simple_probe(void)
68 {
69 return of_flat_dt_match(of_get_flat_dt_root(), board);
70 }
71
define_machine(mpc5200_simple_platform)72 define_machine(mpc5200_simple_platform) {
73 .name = "mpc5200-simple-platform",
74 .probe = mpc5200_simple_probe,
75 .setup_arch = mpc5200_simple_setup_arch,
76 .init = mpc52xx_declare_of_platform_devices,
77 .init_IRQ = mpc52xx_init_irq,
78 .get_irq = mpc52xx_get_irq,
79 .restart = mpc52xx_restart,
80 .calibrate_decr = generic_calibrate_decr,
81 };
82