1 /* 2 * This interface is used for compatibility with old U-boots *ONLY*. 3 * Please do not imitate or extend this. 4 */ 5 6 /* 7 * Unfortunately, the ESTeem Hotfoot board uses a mangled version of 8 * ppcboot.h for historical reasons, and in the interest of having a 9 * mainline kernel boot on the production board+bootloader, this was the 10 * least-offensive solution. Please direct all flames to: 11 * 12 * Solomon Peachy <solomon@linux-wlan.com> 13 * 14 * (This header is identical to ppcboot.h except for the 15 * TARGET_HOTFOOT bits) 16 */ 17 18 /* 19 * (C) Copyright 2000, 2001 20 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. 21 * 22 * This program is free software; you can redistribute it and/or 23 * modify it under the terms of the GNU General Public License as 24 * published by the Free Software Foundation; either version 2 of 25 * the License, or (at your option) any later version. 26 * 27 * This program is distributed in the hope that it will be useful, 28 * but WITHOUT ANY WARRANTY; without even the implied warranty of 29 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 30 * GNU General Public License for more details. 31 * 32 * You should have received a copy of the GNU General Public License 33 * along with this program; if not, write to the Free Software 34 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 35 * MA 02111-1307 USA 36 */ 37 38 #ifndef __PPCBOOT_H__ 39 #define __PPCBOOT_H__ 40 41 /* 42 * Board information passed to kernel from PPCBoot 43 * 44 * include/asm-ppc/ppcboot.h 45 */ 46 47 #include "types.h" 48 49 typedef struct bd_info { 50 unsigned long bi_memstart; /* start of DRAM memory */ 51 unsigned long bi_memsize; /* size of DRAM memory in bytes */ 52 unsigned long bi_flashstart; /* start of FLASH memory */ 53 unsigned long bi_flashsize; /* size of FLASH memory */ 54 unsigned long bi_flashoffset; /* reserved area for startup monitor */ 55 unsigned long bi_sramstart; /* start of SRAM memory */ 56 unsigned long bi_sramsize; /* size of SRAM memory */ 57 #if defined(TARGET_8xx) || defined(TARGET_CPM2) || defined(TARGET_85xx) ||\ 58 defined(TARGET_83xx) 59 unsigned long bi_immr_base; /* base of IMMR register */ 60 #endif 61 #if defined(TARGET_PPC_MPC52xx) 62 unsigned long bi_mbar_base; /* base of internal registers */ 63 #endif 64 unsigned long bi_bootflags; /* boot / reboot flag (for LynxOS) */ 65 unsigned long bi_ip_addr; /* IP Address */ 66 unsigned char bi_enetaddr[6]; /* Ethernet address */ 67 #if defined(TARGET_HOTFOOT) 68 /* second onboard ethernet port */ 69 unsigned char bi_enet1addr[6]; 70 #define HAVE_ENET1ADDR 71 #endif /* TARGET_HOOTFOOT */ 72 unsigned short bi_ethspeed; /* Ethernet speed in Mbps */ 73 unsigned long bi_intfreq; /* Internal Freq, in MHz */ 74 unsigned long bi_busfreq; /* Bus Freq, in MHz */ 75 #if defined(TARGET_CPM2) 76 unsigned long bi_cpmfreq; /* CPM_CLK Freq, in MHz */ 77 unsigned long bi_brgfreq; /* BRG_CLK Freq, in MHz */ 78 unsigned long bi_sccfreq; /* SCC_CLK Freq, in MHz */ 79 unsigned long bi_vco; /* VCO Out from PLL, in MHz */ 80 #endif 81 #if defined(TARGET_PPC_MPC52xx) 82 unsigned long bi_ipbfreq; /* IPB Bus Freq, in MHz */ 83 unsigned long bi_pcifreq; /* PCI Bus Freq, in MHz */ 84 #endif 85 unsigned long bi_baudrate; /* Console Baudrate */ 86 #if defined(TARGET_4xx) 87 unsigned char bi_s_version[4]; /* Version of this structure */ 88 unsigned char bi_r_version[32]; /* Version of the ROM (IBM) */ 89 unsigned int bi_procfreq; /* CPU (Internal) Freq, in Hz */ 90 unsigned int bi_plb_busfreq; /* PLB Bus speed, in Hz */ 91 unsigned int bi_pci_busfreq; /* PCI Bus speed, in Hz */ 92 unsigned char bi_pci_enetaddr[6]; /* PCI Ethernet MAC address */ 93 #endif 94 #if defined(TARGET_HOTFOOT) 95 unsigned int bi_pllouta_freq; /* PLL OUTA speed, in Hz */ 96 #endif 97 #if defined(TARGET_HYMOD) 98 hymod_conf_t bi_hymod_conf; /* hymod configuration information */ 99 #endif 100 #if defined(TARGET_EVB64260) || defined(TARGET_405EP) || defined(TARGET_44x) || \ 101 defined(TARGET_85xx) || defined(TARGET_83xx) || defined(TARGET_HAS_ETH1) 102 /* second onboard ethernet port */ 103 unsigned char bi_enet1addr[6]; 104 #define HAVE_ENET1ADDR 105 #endif 106 #if defined(TARGET_EVB64260) || defined(TARGET_440GX) || \ 107 defined(TARGET_85xx) || defined(TARGET_HAS_ETH2) 108 /* third onboard ethernet ports */ 109 unsigned char bi_enet2addr[6]; 110 #define HAVE_ENET2ADDR 111 #endif 112 #if defined(TARGET_440GX) || defined(TARGET_HAS_ETH3) 113 /* fourth onboard ethernet ports */ 114 unsigned char bi_enet3addr[6]; 115 #define HAVE_ENET3ADDR 116 #endif 117 #if defined(TARGET_HOTFOOT) 118 int bi_phynum[2]; /* Determines phy mapping */ 119 int bi_phymode[2]; /* Determines phy mode */ 120 #endif 121 #if defined(TARGET_4xx) 122 unsigned int bi_opbfreq; /* OB clock in Hz */ 123 int bi_iic_fast[2]; /* Use fast i2c mode */ 124 #endif 125 #if defined(TARGET_440GX) 126 int bi_phynum[4]; /* phy mapping */ 127 int bi_phymode[4]; /* phy mode */ 128 #endif 129 } bd_t; 130 131 #define bi_tbfreq bi_intfreq 132 133 #endif /* __PPCBOOT_H__ */ 134