1/*
2 * Device Tree Source for Emerson KSI8560
3 *
4 * Author: Alexandr Smirnov <asmirnov@ru.mvista.com>
5 *
6 * Based on mpc8560ads.dts
7 *
8 * 2008 (c) MontaVista, Software, Inc.  This file is licensed under
9 * the terms of the GNU General Public License version 2.  This program
10 * is licensed "as is" without any warranty of any kind, whether express
11 * or implied.
12 *
13 */
14
15/dts-v1/;
16
17/ {
18	model = "KSI8560";
19	compatible = "emerson,KSI8560";
20	#address-cells = <1>;
21	#size-cells = <1>;
22
23	aliases {
24		ethernet0 = &enet0;
25		ethernet1 = &enet1;
26		ethernet2 = &enet2;
27	};
28
29	cpus {
30		#address-cells = <1>;
31		#size-cells = <0>;
32
33		PowerPC,8560@0 {
34			device_type = "cpu";
35			reg = <0>;
36			d-cache-line-size = <32>;
37			i-cache-line-size = <32>;
38			d-cache-size = <0x8000>;		/* L1, 32K */
39			i-cache-size = <0x8000>;		/* L1, 32K */
40			timebase-frequency = <0>;		/* From U-boot */
41			bus-frequency = <0>;			/* From U-boot */
42			clock-frequency = <0>;			/* From U-boot */
43			next-level-cache = <&L2>;
44		};
45	};
46
47	memory {
48		device_type = "memory";
49		reg = <0x00000000 0x10000000>;			/* Fixed by bootwrapper */
50	};
51
52	soc@fdf00000 {
53		#address-cells = <1>;
54		#size-cells = <1>;
55		device_type = "soc";
56		ranges = <0x00000000 0xfdf00000 0x00100000>;
57		bus-frequency = <0>;				/* Fixed by bootwrapper */
58
59		ecm-law@0 {
60			compatible = "fsl,ecm-law";
61			reg = <0x0 0x1000>;
62			fsl,num-laws = <8>;
63		};
64
65		ecm@1000 {
66			compatible = "fsl,mpc8560-ecm", "fsl,ecm";
67			reg = <0x1000 0x1000>;
68			interrupts = <17 2>;
69			interrupt-parent = <&mpic>;
70		};
71
72		memory-controller@2000 {
73			compatible = "fsl,mpc8540-memory-controller";
74			reg = <0x2000 0x1000>;
75			interrupt-parent = <&mpic>;
76			interrupts = <0x12 0x2>;
77		};
78
79		L2: l2-cache-controller@20000 {
80			compatible = "fsl,mpc8540-l2-cache-controller";
81			reg = <0x20000 0x1000>;
82			cache-line-size = <0x20>;		/* 32 bytes */
83			cache-size = <0x40000>;			/* L2, 256K */
84			interrupt-parent = <&mpic>;
85			interrupts = <0x10 0x2>;
86		};
87
88		i2c@3000 {
89			#address-cells = <1>;
90			#size-cells = <0>;
91			cell-index = <0>;
92			compatible = "fsl-i2c";
93			reg = <0x3000 0x100>;
94			interrupts = <0x2b 0x2>;
95			interrupt-parent = <&mpic>;
96			dfsrr;
97		};
98
99		dma@21300 {
100			#address-cells = <1>;
101			#size-cells = <1>;
102			compatible = "fsl,mpc8560-dma", "fsl,eloplus-dma";
103			reg = <0x21300 0x4>;
104			ranges = <0x0 0x21100 0x200>;
105			cell-index = <0>;
106			dma-channel@0 {
107				compatible = "fsl,mpc8560-dma-channel",
108						"fsl,eloplus-dma-channel";
109				reg = <0x0 0x80>;
110				cell-index = <0>;
111				interrupt-parent = <&mpic>;
112				interrupts = <20 2>;
113			};
114			dma-channel@80 {
115				compatible = "fsl,mpc8560-dma-channel",
116						"fsl,eloplus-dma-channel";
117				reg = <0x80 0x80>;
118				cell-index = <1>;
119				interrupt-parent = <&mpic>;
120				interrupts = <21 2>;
121			};
122			dma-channel@100 {
123				compatible = "fsl,mpc8560-dma-channel",
124						"fsl,eloplus-dma-channel";
125				reg = <0x100 0x80>;
126				cell-index = <2>;
127				interrupt-parent = <&mpic>;
128				interrupts = <22 2>;
129			};
130			dma-channel@180 {
131				compatible = "fsl,mpc8560-dma-channel",
132						"fsl,eloplus-dma-channel";
133				reg = <0x180 0x80>;
134				cell-index = <3>;
135				interrupt-parent = <&mpic>;
136				interrupts = <23 2>;
137			};
138		};
139
140		enet0: ethernet@24000 {
141			#address-cells = <1>;
142			#size-cells = <1>;
143			device_type = "network";
144			model = "TSEC";
145			compatible = "gianfar";
146			reg = <0x24000 0x1000>;
147			ranges = <0x0 0x24000 0x1000>;
148			/* Mac address filled in by bootwrapper */
149			local-mac-address = [ 00 00 00 00 00 00 ];
150			interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>;
151			interrupt-parent = <&mpic>;
152			tbi-handle = <&tbi0>;
153			phy-handle = <&PHY1>;
154
155			mdio@520 {					/* For TSECs */
156				#address-cells = <1>;
157				#size-cells = <0>;
158				compatible = "fsl,gianfar-mdio";
159				reg = <0x520 0x20>;
160
161				PHY1: ethernet-phy@1 {
162					interrupt-parent = <&mpic>;
163					reg = <0x1>;
164					device_type = "ethernet-phy";
165				};
166
167				PHY2: ethernet-phy@2 {
168					interrupt-parent = <&mpic>;
169					reg = <0x2>;
170					device_type = "ethernet-phy";
171				};
172
173				tbi0: tbi-phy@11 {
174					reg = <0x11>;
175					device_type = "tbi-phy";
176				};
177			};
178		};
179
180		enet1: ethernet@25000 {
181			#address-cells = <1>;
182			#size-cells = <1>;
183			device_type = "network";
184			model = "TSEC";
185			compatible = "gianfar";
186			reg = <0x25000 0x1000>;
187			ranges = <0x0 0x25000 0x1000>;
188			/* Mac address filled in by bootwrapper */
189			local-mac-address = [ 00 00 00 00 00 00 ];
190			interrupts = <0x23 0x2 0x24 0x2 0x28 0x2>;
191			interrupt-parent = <&mpic>;
192			tbi-handle = <&tbi1>;
193			phy-handle = <&PHY2>;
194
195			mdio@520 {
196				#address-cells = <1>;
197				#size-cells = <0>;
198				compatible = "fsl,gianfar-tbi";
199				reg = <0x520 0x20>;
200
201				tbi1: tbi-phy@11 {
202					reg = <0x11>;
203					device_type = "tbi-phy";
204				};
205			};
206		};
207
208		mpic: pic@40000 {
209			#address-cells = <0>;
210			#interrupt-cells = <2>;
211			interrupt-controller;
212			reg = <0x40000 0x40000>;
213			device_type = "open-pic";
214		};
215
216		cpm@919c0 {
217			#address-cells = <1>;
218			#size-cells = <1>;
219			compatible = "fsl,mpc8560-cpm", "fsl,cpm2";
220			reg = <0x919c0 0x30>;
221			ranges;
222
223			muram@80000 {
224				#address-cells = <1>;
225				#size-cells = <1>;
226				ranges = <0x0 0x80000 0x10000>;
227
228				data@0 {
229					compatible = "fsl,cpm-muram-data";
230					reg = <0x0 0x4000 0x9000 0x2000>;
231				};
232			};
233
234			brg@919f0 {
235				compatible = "fsl,mpc8560-brg",
236					     "fsl,cpm2-brg",
237					     "fsl,cpm-brg";
238				reg = <0x919f0 0x10 0x915f0 0x10>;
239				clock-frequency = <165000000>;	/* 166MHz */
240			};
241
242			CPMPIC: pic@90c00 {
243				#address-cells = <0>;
244				#interrupt-cells = <2>;
245				interrupt-controller;
246				interrupts = <0x2e 0x2>;
247				interrupt-parent = <&mpic>;
248				reg = <0x90c00 0x80>;
249				compatible = "fsl,mpc8560-cpm-pic", "fsl,cpm2-pic";
250			};
251
252			serial@91a00 {
253				device_type = "serial";
254				compatible = "fsl,mpc8560-scc-uart",
255					     "fsl,cpm2-scc-uart";
256				reg = <0x91a00 0x20 0x88000 0x100>;
257				fsl,cpm-brg = <1>;
258				fsl,cpm-command = <0x800000>;
259				current-speed = <0x1c200>;
260				interrupts = <0x28 0x8>;
261				interrupt-parent = <&CPMPIC>;
262			};
263
264			serial@91a20 {
265				device_type = "serial";
266				compatible = "fsl,mpc8560-scc-uart",
267					     "fsl,cpm2-scc-uart";
268				reg = <0x91a20 0x20 0x88100 0x100>;
269				fsl,cpm-brg = <2>;
270				fsl,cpm-command = <0x4a00000>;
271				current-speed = <0x1c200>;
272				interrupts = <0x29 0x8>;
273				interrupt-parent = <&CPMPIC>;
274			};
275
276			mdio@90d00 {				/* For FCCs */
277				#address-cells = <1>;
278				#size-cells = <0>;
279				compatible = "fsl,cpm2-mdio-bitbang";
280				reg = <0x90d00 0x14>;
281				fsl,mdio-pin = <24>;
282				fsl,mdc-pin = <25>;
283
284				PHY0: ethernet-phy@0 {
285					interrupt-parent = <&mpic>;
286					reg = <0x0>;
287					device_type = "ethernet-phy";
288				};
289			};
290
291			enet2: ethernet@91300 {
292				device_type = "network";
293				compatible = "fsl,mpc8560-fcc-enet",
294					     "fsl,cpm2-fcc-enet";
295				reg = <0x91300 0x20 0x88400 0x100 0x91390 0x1>;
296				/* Mac address filled in by bootwrapper */
297				local-mac-address = [ 00 00 00 00 00 00 ];
298				fsl,cpm-command = <0x12000300>;
299				interrupts = <0x20 0x8>;
300				interrupt-parent = <&CPMPIC>;
301				phy-handle = <&PHY0>;
302			};
303		};
304	};
305
306	localbus@fdf05000 {
307		#address-cells = <2>;
308		#size-cells = <1>;
309		compatible = "fsl,mpc8560-localbus";
310		reg = <0xfdf05000 0x68>;
311
312		ranges = <0x0 0x0 0xe0000000 0x00800000
313			  0x4 0x0 0xe8080000 0x00080000>;
314
315		flash@0,0 {
316			#address-cells = <1>;
317			#size-cells = <1>;
318			compatible = "jedec-flash";
319			reg = <0x0 0x0 0x800000>;
320			bank-width = <0x2>;
321
322			partition@0 {
323				label = "Primary Kernel";
324				reg = <0x0 0x180000>;
325			};
326			partition@180000 {
327				label = "Primary Filesystem";
328				reg = <0x180000 0x580000>;
329			};
330			partition@700000 {
331				label = "Monitor";
332				reg = <0x300000 0x100000>;
333				read-only;
334			};
335		};
336
337		cpld@4,0 {
338			compatible = "emerson,KSI8560-cpld";
339			reg = <0x4 0x0 0x80000>;
340		};
341	};
342
343
344	chosen {
345		linux,stdout-path = "/soc/cpm/serial@91a00";
346	};
347};
348