1$Id: tgafb.txt,v 1.1.2.2 2000/04/04 06:50:18 mato Exp $ 2 3What is tgafb? 4=============== 5 6This is a driver for DECChip 21030 based graphics framebuffers, a.k.a. TGA 7cards, which are usually found in older Digital Alpha systems. The 8following models are supported: 9 10ZLxP-E1 (8bpp, 2 MB VRAM) 11ZLxP-E2 (32bpp, 8 MB VRAM) 12ZLxP-E3 (32bpp, 16 MB VRAM, Zbuffer) 13 14This version is an almost complete rewrite of the code written by Geert 15Uytterhoeven, which was based on the original TGA console code written by 16Jay Estabrook. 17 18Major new features since Linux 2.0.x: 19 20 * Support for multiple resolutions 21 * Support for fixed-frequency and other oddball monitors 22 (by allowing the video mode to be set at boot time) 23 24User-visible changes since Linux 2.2.x: 25 26 * Sync-on-green is now handled properly 27 * More useful information is printed on bootup 28 (this helps if people run into problems) 29 30This driver does not (yet) support the TGA2 family of framebuffers, so the 31PowerStorm 3D30/4D20 (also known as PBXGB) cards are not supported. These 32can however be used with the standard VGA Text Console driver. 33 34 35Configuration 36============= 37 38You can pass kernel command line options to tgafb with 39`video=tgafb:option1,option2:value2,option3' (multiple options should be 40separated by comma, values are separated from options by `:'). 41Accepted options: 42 43font:X - default font to use. All fonts are supported, including the 44 SUN12x22 font which is very nice at high resolutions. 45 46mode:X - default video mode. The following video modes are supported: 47 640x480-60, 800x600-56, 640x480-72, 800x600-60, 800x600-72, 48 1024x768-60, 1152x864-60, 1024x768-70, 1024x768-76, 49 1152x864-70, 1280x1024-61, 1024x768-85, 1280x1024-70, 50 1152x864-84, 1280x1024-76, 1280x1024-85 51 52 53Known Issues 54============ 55 56The XFree86 FBDev server has been reported not to work, since tgafb doesn't do 57mmap(). Running the standard XF86_TGA server from XFree86 3.3.x works fine for 58me, however this server does not do acceleration, which make certain operations 59quite slow. Support for acceleration is being progressively integrated in 60XFree86 4.x. 61 62When running tgafb in resolutions higher than 640x480, on switching VCs from 63tgafb to XF86_TGA 3.3.x, the entire screen is not re-drawn and must be manually 64refreshed. This is an X server problem, not a tgafb problem, and is fixed in 65XFree86 4.0. 66 67Enjoy! 68 69Martin Lucina <mato@kotelna.sk> 70