1 /* $Id: ns87303.h,v 1.3 2000/01/09 15:16:34 ecd Exp $
2  * ns87303.h: Configuration Register Description for the
3  *            National Semiconductor PC87303 (SuperIO).
4  *
5  * Copyright (C) 1997  Eddie C. Dost  (ecd@skynet.be)
6  */
7 
8 #ifndef _SPARC_NS87303_H
9 #define _SPARC_NS87303_H 1
10 
11 /*
12  * Controll Register Index Values
13  */
14 #define FER	0x00
15 #define FAR	0x01
16 #define PTR	0x02
17 #define FCR	0x03
18 #define PCR	0x04
19 #define KRR	0x05
20 #define PMC	0x06
21 #define TUP	0x07
22 #define SID	0x08
23 #define ASC	0x09
24 #define CS0CF0	0x0a
25 #define CS0CF1	0x0b
26 #define CS1CF0	0x0c
27 #define CS1CF1	0x0d
28 
29 /* Function Enable Register (FER) bits */
30 #define FER_EDM		0x10	/* Encoded Drive and Motor pin information   */
31 
32 /* Function Address Register (FAR) bits */
33 #define FAR_LPT_MASK	0x03
34 #define FAR_LPTB	0x00
35 #define FAR_LPTA	0x01
36 #define FAR_LPTC	0x02
37 
38 /* Power and Test Register (PTR) bits */
39 #define PTR_LPTB_IRQ7	0x08
40 #define PTR_LEVEL_IRQ	0x80	/* When not ECP/EPP: Use level IRQ           */
41 #define PTR_LPT_REG_DIR	0x80	/* When ECP/EPP: LPT CTR controlls direction */
42 				/*               of the parallel port	     */
43 
44 /* Function Control Register (FCR) bits */
45 #define FCR_LDE		0x10	/* Logical Drive Exchange                    */
46 #define FCR_ZWS_ENA	0x20	/* Enable short host read/write in ECP/EPP   */
47 
48 /* Printer Control Register (PCR) bits */
49 #define PCR_EPP_ENABLE	0x01
50 #define PCR_EPP_IEEE	0x02	/* Enable EPP Version 1.9 (IEEE 1284)        */
51 #define PCR_ECP_ENABLE	0x04
52 #define PCR_ECP_CLK_ENA	0x08	/* If 0 ECP Clock is stopped on Power down   */
53 #define PCR_IRQ_POLAR	0x20	/* If 0 IRQ is level high or negative pulse, */
54 				/* if 1 polarity is inverted                 */
55 #define PCR_IRQ_ODRAIN	0x40	/* If 1, IRQ is open drain                   */
56 
57 /* Tape UARTs and Parallel Port Config Register (TUP) bits */
58 #define TUP_EPP_TIMO	0x02	/* Enable EPP timeout IRQ                    */
59 
60 /* Advanced SuperIO Config Register (ASC) bits */
61 #define ASC_LPT_IRQ7	0x01	/* Allways use IRQ7 for LPT                  */
62 #define ASC_DRV2_SEL	0x02	/* Logical Drive Exchange controlled by TDR  */
63 
64 #define FER_RESERVED	0x00
65 #define FAR_RESERVED	0x00
66 #define PTR_RESERVED	0x73
67 #define FCR_RESERVED	0xc4
68 #define PCR_RESERVED	0x10
69 #define KRR_RESERVED	0x00
70 #define PMC_RESERVED	0x98
71 #define TUP_RESERVED	0xfb
72 #define SIP_RESERVED	0x00
73 #define ASC_RESERVED	0x18
74 #define CS0CF0_RESERVED	0x00
75 #define CS0CF1_RESERVED	0x08
76 #define CS1CF0_RESERVED	0x00
77 #define CS1CF1_RESERVED	0x08
78 
79 #ifdef __KERNEL__
80 
81 #include <asm/system.h>
82 #include <asm/io.h>
83 
ns87303_modify(unsigned long port,unsigned int index,unsigned char clr,unsigned char set)84 static __inline__ int ns87303_modify(unsigned long port, unsigned int index,
85 				     unsigned char clr, unsigned char set)
86 {
87 	static unsigned char reserved[] = {
88 		FER_RESERVED, FAR_RESERVED, PTR_RESERVED, FCR_RESERVED,
89 		PCR_RESERVED, KRR_RESERVED, PMC_RESERVED, TUP_RESERVED,
90 		SIP_RESERVED, ASC_RESERVED, CS0CF0_RESERVED, CS0CF1_RESERVED,
91 		CS1CF0_RESERVED, CS1CF1_RESERVED
92 	};
93 	unsigned long flags;
94 	unsigned char value;
95 
96 	if (index > 0x0d)
97 		return -EINVAL;
98 
99 	save_flags(flags); cli();
100 	outb(index, port);
101 	value = inb(port + 1);
102 	value &= ~(reserved[index] | clr);
103 	value |= set;
104 	outb(value, port + 1);
105 	outb(value, port + 1);
106 	restore_flags(flags);
107 
108 	return 0;
109 }
110 
111 #endif /* __KERNEL__ */
112 
113 #endif /* !(_SPARC_NS87303_H) */
114