1# 2# IDE ATA ATAPI Block device driver configuration 3# 4# Andre Hedrick <andre@linux-ide.org> 5# 6mainmenu_option next_comment 7comment 'IDE, ATA and ATAPI Block devices' 8 9dep_tristate 'Enhanced IDE/MFM/RLL disk/cdrom/tape/floppy support' CONFIG_BLK_DEV_IDE $CONFIG_IDE 10comment 'Please see Documentation/ide.txt for help/info on IDE drives' 11if [ "$CONFIG_BLK_DEV_IDE" != "n" ]; then 12 dep_bool ' Use old disk-only driver on primary interface' CONFIG_BLK_DEV_HD_IDE $CONFIG_X86 13 define_bool CONFIG_BLK_DEV_HD $CONFIG_BLK_DEV_HD_IDE 14 15 dep_mbool ' Support for SATA (deprecated; conflicts with libata SATA driver)' CONFIG_BLK_DEV_IDE_SATA $CONFIG_BLK_DEV_IDE 16 dep_tristate ' Include IDE/ATA-2 DISK support' CONFIG_BLK_DEV_IDEDISK $CONFIG_BLK_DEV_IDE 17 dep_mbool ' Use multi-mode by default' CONFIG_IDEDISK_MULTI_MODE $CONFIG_BLK_DEV_IDEDISK 18 dep_mbool ' Auto-Geometry Resizing support' CONFIG_IDEDISK_STROKE $CONFIG_BLK_DEV_IDEDISK 19 20 dep_tristate ' PCMCIA IDE support' CONFIG_BLK_DEV_IDECS $CONFIG_BLK_DEV_IDE $CONFIG_PCMCIA 21 dep_tristate ' Cardbus IDE support (Delkin/ASKA/Workbit)' CONFIG_BLK_DEV_DELKIN $CONFIG_BLK_DEV_IDE $CONFIG_PCMCIA $CONFIG_PCI 22 dep_tristate ' Include IDE/ATAPI CDROM support' CONFIG_BLK_DEV_IDECD $CONFIG_BLK_DEV_IDE 23 dep_tristate ' Include IDE/ATAPI TAPE support' CONFIG_BLK_DEV_IDETAPE $CONFIG_BLK_DEV_IDE 24 dep_tristate ' Include IDE/ATAPI FLOPPY support' CONFIG_BLK_DEV_IDEFLOPPY $CONFIG_BLK_DEV_IDE 25 dep_tristate ' SCSI emulation support' CONFIG_BLK_DEV_IDESCSI $CONFIG_BLK_DEV_IDE $CONFIG_SCSI 26 27 bool ' IDE Taskfile Access' CONFIG_IDE_TASK_IOCTL 28# bool ' IDE Taskfile IO' CONFIG_IDE_TASKFILE_IO 29 30 comment 'IDE chipset support/bugfixes' 31 if [ "$CONFIG_BLK_DEV_IDE" != "n" ]; then 32 dep_bool ' CMD640 chipset bugfix/support' CONFIG_BLK_DEV_CMD640 $CONFIG_X86 33 dep_bool ' CMD640 enhanced support' CONFIG_BLK_DEV_CMD640_ENHANCED $CONFIG_BLK_DEV_CMD640 34 dep_bool ' ISA-PNP EIDE support' CONFIG_BLK_DEV_ISAPNP $CONFIG_ISAPNP 35 if [ "$CONFIG_PCI" = "y" ]; then 36 bool ' PCI IDE chipset support' CONFIG_BLK_DEV_IDEPCI 37 if [ "$CONFIG_BLK_DEV_IDEPCI" = "y" ]; then 38 dep_bool ' Generic PCI IDE Chipset Support' CONFIG_BLK_DEV_GENERIC $CONFIG_BLK_DEV_IDEPCI 39 bool ' Sharing PCI IDE interrupts support' CONFIG_IDEPCI_SHARE_IRQ 40 bool ' Generic PCI bus-master DMA support' CONFIG_BLK_DEV_IDEDMA_PCI 41 bool ' Boot off-board chipsets first support' CONFIG_BLK_DEV_OFFBOARD 42 dep_bool ' Force enable legacy 2.0.X HOSTS to use DMA' CONFIG_BLK_DEV_IDEDMA_FORCED $CONFIG_BLK_DEV_IDEDMA_PCI 43 dep_bool ' Use PCI DMA by default when available' CONFIG_IDEDMA_PCI_AUTO $CONFIG_BLK_DEV_IDEDMA_PCI 44 dep_bool ' Enable DMA only for disks ' CONFIG_IDEDMA_ONLYDISK $CONFIG_IDEDMA_PCI_AUTO 45 define_bool CONFIG_BLK_DEV_IDEDMA $CONFIG_BLK_DEV_IDEDMA_PCI 46 dep_bool ' ATA Work(s) In Progress (EXPERIMENTAL)' CONFIG_IDEDMA_PCI_WIP $CONFIG_BLK_DEV_IDEDMA_PCI $CONFIG_EXPERIMENTAL 47# dep_bool ' Good-Bad DMA Model-Firmware (WIP)' CONFIG_IDEDMA_NEW_DRIVE_LISTINGS $CONFIG_IDEDMA_PCI_WIP 48 dep_tristate ' Pacific Digital ADMA-100 basic support' CONFIG_BLK_DEV_ADMA100 $CONFIG_BLK_DEV_IDEDMA_PCI 49 dep_tristate ' AEC62XX chipset support' CONFIG_BLK_DEV_AEC62XX $CONFIG_BLK_DEV_IDEDMA_PCI 50 dep_tristate ' ALI M15x3 chipset support' CONFIG_BLK_DEV_ALI15X3 $CONFIG_BLK_DEV_IDEDMA_PCI 51 dep_mbool ' ALI M15x3 WDC support (DANGEROUS)' CONFIG_WDC_ALI15X3 $CONFIG_BLK_DEV_ALI15X3 52 dep_tristate ' AMD and nVidia IDE support' CONFIG_BLK_DEV_AMD74XX $CONFIG_BLK_DEV_IDEDMA_PCI 53 dep_mbool ' AMD Viper ATA-66 Override' CONFIG_AMD74XX_OVERRIDE $CONFIG_BLK_DEV_AMD74XX 54 dep_tristate ' ATI IXP chipset IDE support' CONFIG_BLK_DEV_ATIIXP $CONFIG_BLK_DEV_IDEDMA_PCI $CONFIG_X86 55 dep_tristate ' CMD64{3|6|8|9} chipset support' CONFIG_BLK_DEV_CMD64X $CONFIG_BLK_DEV_IDEDMA_PCI 56 dep_tristate ' Compaq Triflex IDE support' CONFIG_BLK_DEV_TRIFLEX $CONFIG_BLK_DEV_IDEDMA_PCI 57 dep_tristate ' CY82C693 chipset support' CONFIG_BLK_DEV_CY82C693 $CONFIG_BLK_DEV_IDEDMA_PCI 58 dep_tristate ' Cyrix CS5530 MediaGX chipset support' CONFIG_BLK_DEV_CS5530 $CONFIG_BLK_DEV_IDEDMA_PCI 59 dep_tristate ' HPT34X chipset support' CONFIG_BLK_DEV_HPT34X $CONFIG_BLK_DEV_IDEDMA_PCI 60 dep_mbool ' HPT34X AUTODMA support (WIP)' CONFIG_HPT34X_AUTODMA $CONFIG_BLK_DEV_HPT34X $CONFIG_IDEDMA_PCI_WIP 61 dep_tristate ' HPT36X/37X chipset support' CONFIG_BLK_DEV_HPT366 $CONFIG_BLK_DEV_IDEDMA_PCI 62 dep_tristate ' Intel PIIXn chipsets support' CONFIG_BLK_DEV_PIIX $CONFIG_BLK_DEV_IDEDMA_PCI 63 if [ "$CONFIG_MIPS_ITE8172" = "y" -o "$CONFIG_MIPS_IVR" = "y" ]; then 64 dep_mbool ' IT8172 IDE support' CONFIG_BLK_DEV_IT8172 $CONFIG_BLK_DEV_IDEDMA_PCI 65 fi 66 dep_tristate ' NS87415 chipset support' CONFIG_BLK_DEV_NS87415 $CONFIG_BLK_DEV_IDEDMA_PCI 67 dep_tristate ' OPTi 82C621 chipset enhanced support (EXPERIMENTAL)' CONFIG_BLK_DEV_OPTI621 $CONFIG_EXPERIMENTAL 68 dep_tristate ' Promise PDC202{46|62|65|67} support' CONFIG_BLK_DEV_PDC202XX_OLD $CONFIG_BLK_DEV_IDEDMA_PCI 69 dep_mbool ' Force (U)DMA burst transfers' CONFIG_PDC202XX_BURST $CONFIG_BLK_DEV_PDC202XX_OLD 70 dep_tristate ' Promise PDC202{68|69|70|71|75|76|77} support' CONFIG_BLK_DEV_PDC202XX_NEW $CONFIG_BLK_DEV_IDEDMA_PCI 71 if [ "$CONFIG_BLK_DEV_PDC202XX_OLD" = "y" -o "$CONFIG_BLK_DEV_PDC202XX_OLD" = "m" -o "$CONFIG_BLK_DEV_PDC202XX_NEW" = "y" -o "$CONFIG_BLK_DEV_PDC202XX_NEW" = "m" ]; then 72 bool ' Ignore BIOS port disabled setting on FastTrak' CONFIG_PDC202XX_FORCE 73 fi 74 dep_tristate ' RZ1000 chipset bugfix/support' CONFIG_BLK_DEV_RZ1000 $CONFIG_X86 75 dep_tristate ' SCx200 chipset support' CONFIG_BLK_DEV_SC1200 $CONFIG_BLK_DEV_IDEDMA_PCI 76 dep_tristate ' ServerWorks OSB4/CSB5/CSB6 chipsets support' CONFIG_BLK_DEV_SVWKS $CONFIG_BLK_DEV_IDEDMA_PCI 77 if [ "$CONFIG_IA64_GENERIC" = "y" -o "$CONFIG_IA64_SGI_SN2" = "y" ] ; then 78 dep_tristate ' SGI IOC4 chipset support' CONFIG_BLK_DEV_SGIIOC4 $CONFIG_BLK_DEV_IDEDMA_PCI 79 fi 80 dep_tristate ' Silicon Image chipset support' CONFIG_BLK_DEV_SIIMAGE $CONFIG_BLK_DEV_IDEDMA_PCI 81 dep_tristate ' SiS5513 chipset support' CONFIG_BLK_DEV_SIS5513 $CONFIG_BLK_DEV_IDEDMA_PCI $CONFIG_X86 82 dep_tristate ' SLC90E66 chipset support' CONFIG_BLK_DEV_SLC90E66 $CONFIG_BLK_DEV_IDEDMA_PCI 83 dep_tristate ' Tekram TRM290 chipset support' CONFIG_BLK_DEV_TRM290 $CONFIG_BLK_DEV_IDEDMA_PCI 84 dep_tristate ' VIA82CXXX chipset support' CONFIG_BLK_DEV_VIA82CXXX $CONFIG_BLK_DEV_IDEDMA_PCI 85 if [ "$CONFIG_PPC" = "y" -o "$CONFIG_ARM" = "y" ]; then 86 dep_tristate ' Winbond SL82c105 support' CONFIG_BLK_DEV_SL82C105 $CONFIG_BLK_DEV_IDEPCI 87 fi 88 fi 89 fi 90 if [ "$CONFIG_ALL_PPC" = "y" ]; then 91 bool ' Builtin PowerMac IDE support' CONFIG_BLK_DEV_IDE_PMAC 92 dep_bool ' Probe internal Kauai ATA/100 first' CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST $CONFIG_BLK_DEV_IDE_PMAC 93 dep_bool ' PowerMac IDE DMA support' CONFIG_BLK_DEV_IDEDMA_PMAC $CONFIG_BLK_DEV_IDE_PMAC 94 dep_bool ' Use DMA by default' CONFIG_BLK_DEV_IDEDMA_PMAC_AUTO $CONFIG_BLK_DEV_IDEDMA_PMAC 95 if [ "$CONFIG_BLK_DEV_IDE_PMAC" = "y" ]; then 96 define_bool CONFIG_BLK_DEV_IDEDMA $CONFIG_BLK_DEV_IDEDMA_PMAC 97 fi 98 if [ "$CONFIG_BLK_DEV_IDEDMA_PMAC" = "y" ]; then 99 define_bool CONFIG_BLK_DEV_IDEPCI $CONFIG_BLK_DEV_IDEDMA_PMAC 100 fi 101 fi 102 if [ "$CONFIG_SIBYTE_GENBUS_IDE" = "y" ]; then 103 bool ' Broadcom SiByte onboard IDE support' CONFIG_BLK_DEV_IDE_SIBYTE 104 fi 105 if [ "$CONFIG_ARCH_ACORN" = "y" ]; then 106 dep_bool ' ICS IDE interface support' CONFIG_BLK_DEV_IDE_ICSIDE $CONFIG_ARCH_ACORN 107 dep_bool ' ICS DMA support' CONFIG_BLK_DEV_IDEDMA_ICS $CONFIG_BLK_DEV_IDE_ICSIDE 108 dep_bool ' Use ICS DMA by default' CONFIG_IDEDMA_ICS_AUTO $CONFIG_BLK_DEV_IDEDMA_ICS 109 define_bool CONFIG_BLK_DEV_IDEDMA $CONFIG_BLK_DEV_IDEDMA_ICS 110 dep_bool ' RapIDE interface support' CONFIG_BLK_DEV_IDE_RAPIDE $CONFIG_ARCH_ACORN 111 fi 112 if [ "$CONFIG_AMIGA" = "y" ]; then 113 dep_bool ' Amiga Gayle IDE interface support' CONFIG_BLK_DEV_GAYLE $CONFIG_AMIGA 114 dep_mbool ' Amiga IDE Doubler support (EXPERIMENTAL)' CONFIG_BLK_DEV_IDEDOUBLER $CONFIG_BLK_DEV_GAYLE $CONFIG_EXPERIMENTAL 115 fi 116 if [ "$CONFIG_ZORRO" = "y" -a "$CONFIG_EXPERIMENTAL" = "y" ]; then 117 dep_mbool ' Buddha/Catweasel/X-Surf IDE interface support (EXPERIMENTAL)' CONFIG_BLK_DEV_BUDDHA $CONFIG_ZORRO $CONFIG_EXPERIMENTAL 118 fi 119 if [ "$CONFIG_ATARI" = "y" ]; then 120 dep_bool ' Falcon IDE interface support' CONFIG_BLK_DEV_FALCON_IDE $CONFIG_ATARI 121 fi 122 if [ "$CONFIG_CPCI405" = "y" ]; then 123 dep_bool ' CPCI-405 IDE interface support' CONFIG_BLK_DEV_CPCI405_IDE $CONFIG_CPCI405 124 fi 125 if [ "$CONFIG_MAC" = "y" ]; then 126 dep_bool ' Macintosh Quadra/Powerbook IDE interface support' CONFIG_BLK_DEV_MAC_IDE $CONFIG_MAC 127 fi 128 if [ "$CONFIG_Q40" = "y" ]; then 129 dep_bool ' Q40/Q60 IDE interface support' CONFIG_BLK_DEV_Q40IDE $CONFIG_Q40 130 fi 131 if [ "$CONFIG_8xx" = "y" ]; then 132 dep_bool ' MPC8xx IDE support' CONFIG_BLK_DEV_MPC8xx_IDE $CONFIG_8xx 133 fi 134 135 if [ "$CONFIG_BLK_DEV_MPC8xx_IDE" = "y" ]; then 136 choice 'Type of MPC8xx IDE interface' \ 137 "8xx_PCCARD CONFIG_IDE_8xx_PCCARD \ 138 8xx_DIRECT CONFIG_IDE_8xx_DIRECT \ 139 EXT_DIRECT CONFIG_IDE_EXT_DIRECT" 8xx_PCCARD 140 fi 141 142 # no isa -> no vlb 143 dep_bool ' Other IDE chipset support' CONFIG_IDE_CHIPSETS $CONFIG_ISA 144 if [ "$CONFIG_IDE_CHIPSETS" = "y" ]; then 145 comment 'Note: most of these also require special kernel boot parameters' 146 bool ' Generic 4 drives/port support' CONFIG_BLK_DEV_4DRIVES 147 dep_tristate ' ALI M14xx support' CONFIG_BLK_DEV_ALI14XX $CONFIG_BLK_DEV_IDE 148 dep_tristate ' DTC-2278 support' CONFIG_BLK_DEV_DTC2278 $CONFIG_BLK_DEV_IDE 149 dep_tristate ' Holtek HT6560B support' CONFIG_BLK_DEV_HT6560B $CONFIG_BLK_DEV_IDE 150 dep_tristate ' PROMISE DC4030 support (EXPERIMENTAL)' CONFIG_BLK_DEV_PDC4030 $CONFIG_BLK_DEV_IDEDISK $CONFIG_EXPERIMENTAL 151 dep_tristate ' QDI QD65xx support' CONFIG_BLK_DEV_QD65XX $CONFIG_BLK_DEV_IDE 152 dep_tristate ' UMC-8672 support' CONFIG_BLK_DEV_UMC8672 $CONFIG_BLK_DEV_IDE 153 fi 154 fi 155else 156 bool 'Old hard disk (MFM/RLL/IDE) driver' CONFIG_BLK_DEV_HD_ONLY 157 define_bool CONFIG_BLK_DEV_HD $CONFIG_BLK_DEV_HD_ONLY 158fi 159 160if [ "$CONFIG_IDEDMA_PCI_AUTO" = "y" -o \ 161 "$CONFIG_BLK_DEV_IDEDMA_PMAC_AUTO" = "y" -o \ 162 "$CONFIG_IDEDMA_ICS_AUTO" = "y" ]; then 163 define_bool CONFIG_IDEDMA_AUTO y 164else 165 define_bool CONFIG_IDEDMA_AUTO n 166fi 167 168if [ "$CONFIG_BLK_DEV_IDEDMA_PCI" = "y" -o \ 169 "$CONFIG_BLK_DEV_IDEDMA_PMAC" = "y" -o \ 170 "$CONFIG_BLK_DEV_IDEDMA_ICS" = "y" ]; then 171 bool ' IGNORE word93 Validation BITS' CONFIG_IDEDMA_IVB 172fi 173 174if [ "$CONFIG_BLK_DEV_TIVO" = "y" ]; then 175 define_bool CONFIG_DMA_NONPCI y 176else 177 define_bool CONFIG_DMA_NONPCI n 178fi 179 180if [ "$CONFIG_BLK_DEV_IDEDMA_PCI" = "y" ]; then 181 if [ "$CONFIG_BLK_DEV_PDC202XX_OLD" != "n" -o \ 182 "$CONFIG_BLK_DEV_PDC202XX_NEW" != "n" ]; then 183 define_bool CONFIG_BLK_DEV_PDC202XX y 184 fi 185fi 186 187##if [ "$CONFIG_IDE_TASKFILE_IO" = "y" ]; then 188## dep_mbool CONFIG_BLK_DEV_TF_DISK $CONFIG_BLK_DEV_IDEDISK 189##else 190## dep_mbool CONFIG_BLK_DEV_NTF_DISK $CONFIG_BLK_DEV_IDEDISK 191##fi 192 193dep_tristate 'Support for IDE Raid controllers (EXPERIMENTAL)' CONFIG_BLK_DEV_ATARAID $CONFIG_BLK_DEV_IDE $CONFIG_EXPERIMENTAL 194dep_tristate ' Support Promise software RAID (Fasttrak(tm)) (EXPERIMENTAL)' CONFIG_BLK_DEV_ATARAID_PDC $CONFIG_BLK_DEV_IDE $CONFIG_EXPERIMENTAL $CONFIG_BLK_DEV_ATARAID 195dep_tristate ' Highpoint 370 software RAID (EXPERIMENTAL)' CONFIG_BLK_DEV_ATARAID_HPT $CONFIG_BLK_DEV_IDE $CONFIG_EXPERIMENTAL $CONFIG_BLK_DEV_ATARAID 196dep_tristate ' CMD/Silicon Image Medley Software RAID (EXPERIMENTAL)' CONFIG_BLK_DEV_ATARAID_MEDLEY $CONFIG_BLK_DEV_IDE $CONFIG_EXPERIMENTAL $CONFIG_BLK_DEV_ATARAID 197dep_tristate ' Silicon Image Medley software RAID (EXPERIMENTAL)' CONFIG_BLK_DEV_ATARAID_SII $CONFIG_BLK_DEV_IDE $CONFIG_EXPERIMENTAL $CONFIG_BLK_DEV_ATARAID 198 199endmenu 200