1 /*
2  *
3  *  Bluetooth driver for the Anycom BlueCard (LSE039/LSE041)
4  *
5  *  Copyright (C) 2001-2002  Marcel Holtmann <marcel@holtmann.org>
6  *
7  *
8  *  This program is free software; you can redistribute it and/or modify
9  *  it under the terms of the GNU General Public License version 2 as
10  *  published by the Free Software Foundation;
11  *
12  *  Software distributed under the License is distributed on an "AS
13  *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
14  *  implied. See the License for the specific language governing
15  *  rights and limitations under the License.
16  *
17  *  The initial developer of the original code is David A. Hinds
18  *  <dahinds@users.sourceforge.net>.  Portions created by David A. Hinds
19  *  are Copyright (C) 1999 David A. Hinds.  All Rights Reserved.
20  *
21  */
22 
23 #include <linux/config.h>
24 #include <linux/module.h>
25 
26 #include <linux/kernel.h>
27 #include <linux/init.h>
28 #include <linux/slab.h>
29 #include <linux/types.h>
30 #include <linux/sched.h>
31 #include <linux/timer.h>
32 #include <linux/errno.h>
33 #include <linux/ptrace.h>
34 #include <linux/ioport.h>
35 #include <linux/spinlock.h>
36 #include <linux/skbuff.h>
37 #include <asm/io.h>
38 
39 #include <pcmcia/version.h>
40 #include <pcmcia/cs_types.h>
41 #include <pcmcia/cs.h>
42 #include <pcmcia/cistpl.h>
43 #include <pcmcia/ciscode.h>
44 #include <pcmcia/ds.h>
45 #include <pcmcia/cisreg.h>
46 
47 #include <net/bluetooth/bluetooth.h>
48 #include <net/bluetooth/hci_core.h>
49 
50 
51 
52 /* ======================== Module parameters ======================== */
53 
54 
55 /* Bit map of interrupts to choose from */
56 static u_int irq_mask = 0x86bc;
57 static int irq_list[4] = { -1 };
58 
59 MODULE_PARM(irq_mask, "i");
60 MODULE_PARM(irq_list, "1-4i");
61 
62 MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
63 MODULE_DESCRIPTION("BlueZ driver for the Anycom BlueCard (LSE039/LSE041)");
64 MODULE_LICENSE("GPL");
65 
66 
67 
68 /* ======================== Local structures ======================== */
69 
70 
71 typedef struct bluecard_info_t {
72 	dev_link_t link;
73 	dev_node_t node;
74 
75 	struct hci_dev hdev;
76 
77 	spinlock_t lock;		/* For serializing operations */
78 	struct timer_list timer;	/* For LED control */
79 
80 	struct sk_buff_head txq;
81 	unsigned long tx_state;
82 
83 	unsigned long rx_state;
84 	unsigned long rx_count;
85 	struct sk_buff *rx_skb;
86 
87 	unsigned char ctrl_reg;
88 	unsigned long hw_state;		/* Status of the hardware and LED control */
89 } bluecard_info_t;
90 
91 
92 void bluecard_config(dev_link_t *link);
93 void bluecard_release(u_long arg);
94 int bluecard_event(event_t event, int priority, event_callback_args_t *args);
95 
96 static dev_info_t dev_info = "bluecard_cs";
97 
98 dev_link_t *bluecard_attach(void);
99 void bluecard_detach(dev_link_t *);
100 
101 static dev_link_t *dev_list = NULL;
102 
103 
104 /* Default baud rate: 57600, 115200, 230400 or 460800 */
105 #define DEFAULT_BAUD_RATE  230400
106 
107 
108 /* Hardware states */
109 #define CARD_READY             1
110 #define CARD_HAS_PCCARD_ID     4
111 #define CARD_HAS_POWER_LED     5
112 #define CARD_HAS_ACTIVITY_LED  6
113 
114 /* Transmit states  */
115 #define XMIT_SENDING         1
116 #define XMIT_WAKEUP          2
117 #define XMIT_BUFFER_NUMBER   5	/* unset = buffer one, set = buffer two */
118 #define XMIT_BUF_ONE_READY   6
119 #define XMIT_BUF_TWO_READY   7
120 #define XMIT_SENDING_READY   8
121 
122 /* Receiver states */
123 #define RECV_WAIT_PACKET_TYPE   0
124 #define RECV_WAIT_EVENT_HEADER  1
125 #define RECV_WAIT_ACL_HEADER    2
126 #define RECV_WAIT_SCO_HEADER    3
127 #define RECV_WAIT_DATA          4
128 
129 /* Special packet types */
130 #define PKT_BAUD_RATE_57600   0x80
131 #define PKT_BAUD_RATE_115200  0x81
132 #define PKT_BAUD_RATE_230400  0x82
133 #define PKT_BAUD_RATE_460800  0x83
134 
135 
136 /* These are the register offsets */
137 #define REG_COMMAND     0x20
138 #define REG_INTERRUPT   0x21
139 #define REG_CONTROL     0x22
140 #define REG_RX_CONTROL  0x24
141 #define REG_CARD_RESET  0x30
142 #define REG_LED_CTRL    0x30
143 
144 /* REG_COMMAND */
145 #define REG_COMMAND_TX_BUF_ONE  0x01
146 #define REG_COMMAND_TX_BUF_TWO  0x02
147 #define REG_COMMAND_RX_BUF_ONE  0x04
148 #define REG_COMMAND_RX_BUF_TWO  0x08
149 #define REG_COMMAND_RX_WIN_ONE  0x00
150 #define REG_COMMAND_RX_WIN_TWO  0x10
151 
152 /* REG_CONTROL */
153 #define REG_CONTROL_BAUD_RATE_57600   0x00
154 #define REG_CONTROL_BAUD_RATE_115200  0x01
155 #define REG_CONTROL_BAUD_RATE_230400  0x02
156 #define REG_CONTROL_BAUD_RATE_460800  0x03
157 #define REG_CONTROL_RTS               0x04
158 #define REG_CONTROL_BT_ON             0x08
159 #define REG_CONTROL_BT_RESET          0x10
160 #define REG_CONTROL_BT_RES_PU         0x20
161 #define REG_CONTROL_INTERRUPT         0x40
162 #define REG_CONTROL_CARD_RESET        0x80
163 
164 /* REG_RX_CONTROL */
165 #define RTS_LEVEL_SHIFT_BITS  0x02
166 
167 
168 
169 /* ======================== LED handling routines ======================== */
170 
171 
bluecard_activity_led_timeout(u_long arg)172 void bluecard_activity_led_timeout(u_long arg)
173 {
174 	bluecard_info_t *info = (bluecard_info_t *)arg;
175 	unsigned int iobase = info->link.io.BasePort1;
176 
177 	if (test_bit(CARD_HAS_ACTIVITY_LED, &(info->hw_state))) {
178 		/* Disable activity LED */
179 		outb(0x08 | 0x20, iobase + 0x30);
180 	} else {
181 		/* Disable power LED */
182 		outb(0x00, iobase + 0x30);
183 	}
184 }
185 
186 
bluecard_enable_activity_led(bluecard_info_t * info)187 static void bluecard_enable_activity_led(bluecard_info_t *info)
188 {
189 	unsigned int iobase = info->link.io.BasePort1;
190 
191 	if (test_bit(CARD_HAS_ACTIVITY_LED, &(info->hw_state))) {
192 		/* Enable activity LED */
193 		outb(0x10 | 0x40, iobase + 0x30);
194 
195 		/* Stop the LED after HZ/4 */
196 		mod_timer(&(info->timer), jiffies + HZ / 4);
197 	} else {
198 		/* Enable power LED */
199 		outb(0x08 | 0x20, iobase + 0x30);
200 
201 		/* Stop the LED after HZ/2 */
202 		mod_timer(&(info->timer), jiffies + HZ / 2);
203 	}
204 }
205 
206 
207 
208 /* ======================== Interrupt handling ======================== */
209 
210 
bluecard_write(unsigned int iobase,unsigned int offset,__u8 * buf,int len)211 static int bluecard_write(unsigned int iobase, unsigned int offset, __u8 *buf, int len)
212 {
213 	int i, actual;
214 
215 	actual = (len > 15) ? 15 : len;
216 
217 	outb_p(actual, iobase + offset);
218 
219 	for (i = 0; i < actual; i++)
220 		outb_p(buf[i], iobase + offset + i + 1);
221 
222 	return actual;
223 }
224 
225 
bluecard_write_wakeup(bluecard_info_t * info)226 static void bluecard_write_wakeup(bluecard_info_t *info)
227 {
228 	if (!info) {
229 		printk(KERN_WARNING "bluecard_cs: Call of write_wakeup for unknown device.\n");
230 		return;
231 	}
232 
233 	if (!test_bit(XMIT_SENDING_READY, &(info->tx_state)))
234 		return;
235 
236 	if (test_and_set_bit(XMIT_SENDING, &(info->tx_state))) {
237 		set_bit(XMIT_WAKEUP, &(info->tx_state));
238 		return;
239 	}
240 
241 	do {
242 		register unsigned int iobase = info->link.io.BasePort1;
243 		register unsigned int offset;
244 		register unsigned char command;
245 		register unsigned long ready_bit;
246 		register struct sk_buff *skb;
247 		register int len;
248 
249 		clear_bit(XMIT_WAKEUP, &(info->tx_state));
250 
251 		if (!(info->link.state & DEV_PRESENT))
252 			return;
253 
254 		if (test_bit(XMIT_BUFFER_NUMBER, &(info->tx_state))) {
255 			if (!test_bit(XMIT_BUF_TWO_READY, &(info->tx_state)))
256 				break;
257 			offset = 0x10;
258 			command = REG_COMMAND_TX_BUF_TWO;
259 			ready_bit = XMIT_BUF_TWO_READY;
260 		} else {
261 			if (!test_bit(XMIT_BUF_ONE_READY, &(info->tx_state)))
262 				break;
263 			offset = 0x00;
264 			command = REG_COMMAND_TX_BUF_ONE;
265 			ready_bit = XMIT_BUF_ONE_READY;
266 		}
267 
268 		if (!(skb = skb_dequeue(&(info->txq))))
269 			break;
270 
271 		if (skb->pkt_type & 0x80) {
272 			/* Disable RTS */
273 			info->ctrl_reg |= REG_CONTROL_RTS;
274 			outb(info->ctrl_reg, iobase + REG_CONTROL);
275 		}
276 
277 		/* Activate LED */
278 		bluecard_enable_activity_led(info);
279 
280 		/* Send frame */
281 		len = bluecard_write(iobase, offset, skb->data, skb->len);
282 
283 		/* Tell the FPGA to send the data */
284 		outb_p(command, iobase + REG_COMMAND);
285 
286 		/* Mark the buffer as dirty */
287 		clear_bit(ready_bit, &(info->tx_state));
288 
289 		if (skb->pkt_type & 0x80) {
290 
291 			wait_queue_head_t wait;
292 			unsigned char baud_reg;
293 
294 			switch (skb->pkt_type) {
295 			case PKT_BAUD_RATE_460800:
296 				baud_reg = REG_CONTROL_BAUD_RATE_460800;
297 				break;
298 			case PKT_BAUD_RATE_230400:
299 				baud_reg = REG_CONTROL_BAUD_RATE_230400;
300 				break;
301 			case PKT_BAUD_RATE_115200:
302 				baud_reg = REG_CONTROL_BAUD_RATE_115200;
303 				break;
304 			case PKT_BAUD_RATE_57600:
305 				/* Fall through... */
306 			default:
307 				baud_reg = REG_CONTROL_BAUD_RATE_57600;
308 				break;
309 			}
310 
311 			/* Wait until the command reaches the baseband */
312 			init_waitqueue_head(&wait);
313 			interruptible_sleep_on_timeout(&wait, HZ / 10);
314 
315 			/* Set baud on baseband */
316 			info->ctrl_reg &= ~0x03;
317 			info->ctrl_reg |= baud_reg;
318 			outb(info->ctrl_reg, iobase + REG_CONTROL);
319 
320 			/* Enable RTS */
321 			info->ctrl_reg &= ~REG_CONTROL_RTS;
322 			outb(info->ctrl_reg, iobase + REG_CONTROL);
323 
324 			/* Wait before the next HCI packet can be send */
325 			interruptible_sleep_on_timeout(&wait, HZ);
326 
327 		}
328 
329 		if (len == skb->len) {
330 			kfree_skb(skb);
331 		} else {
332 			skb_pull(skb, len);
333 			skb_queue_head(&(info->txq), skb);
334 		}
335 
336 		info->hdev.stat.byte_tx += len;
337 
338 		/* Change buffer */
339 		change_bit(XMIT_BUFFER_NUMBER, &(info->tx_state));
340 
341 	} while (test_bit(XMIT_WAKEUP, &(info->tx_state)));
342 
343 	clear_bit(XMIT_SENDING, &(info->tx_state));
344 }
345 
346 
bluecard_read(unsigned int iobase,unsigned int offset,__u8 * buf,int size)347 static int bluecard_read(unsigned int iobase, unsigned int offset, __u8 *buf, int size)
348 {
349 	int i, n, len;
350 
351 	outb(REG_COMMAND_RX_WIN_ONE, iobase + REG_COMMAND);
352 
353 	len = inb(iobase + offset);
354 	n = 0;
355 	i = 1;
356 
357 	while (n < len) {
358 
359 		if (i == 16) {
360 			outb(REG_COMMAND_RX_WIN_TWO, iobase + REG_COMMAND);
361 			i = 0;
362 		}
363 
364 		buf[n] = inb(iobase + offset + i);
365 
366 		n++;
367 		i++;
368 
369 	}
370 
371 	return len;
372 }
373 
374 
bluecard_receive(bluecard_info_t * info,unsigned int offset)375 static void bluecard_receive(bluecard_info_t *info, unsigned int offset)
376 {
377 	unsigned int iobase;
378 	unsigned char buf[31];
379 	int i, len;
380 
381 	if (!info) {
382 		printk(KERN_WARNING "bluecard_cs: Call of receive for unknown device.\n");
383 		return;
384 	}
385 
386 	iobase = info->link.io.BasePort1;
387 
388 	if (test_bit(XMIT_SENDING_READY, &(info->tx_state)))
389 		bluecard_enable_activity_led(info);
390 
391 	len = bluecard_read(iobase, offset, buf, sizeof(buf));
392 
393 	for (i = 0; i < len; i++) {
394 
395 		/* Allocate packet */
396 		if (info->rx_skb == NULL) {
397 			info->rx_state = RECV_WAIT_PACKET_TYPE;
398 			info->rx_count = 0;
399 			if (!(info->rx_skb = bluez_skb_alloc(HCI_MAX_FRAME_SIZE, GFP_ATOMIC))) {
400 				printk(KERN_WARNING "bluecard_cs: Can't allocate mem for new packet.\n");
401 				return;
402 			}
403 		}
404 
405 		if (info->rx_state == RECV_WAIT_PACKET_TYPE) {
406 
407 			info->rx_skb->dev = (void *)&(info->hdev);
408 			info->rx_skb->pkt_type = buf[i];
409 
410 			switch (info->rx_skb->pkt_type) {
411 
412 			case 0x00:
413 				/* init packet */
414 				if (offset != 0x00) {
415 					set_bit(XMIT_BUF_ONE_READY, &(info->tx_state));
416 					set_bit(XMIT_BUF_TWO_READY, &(info->tx_state));
417 					set_bit(XMIT_SENDING_READY, &(info->tx_state));
418 					bluecard_write_wakeup(info);
419 				}
420 
421 				kfree_skb(info->rx_skb);
422 				info->rx_skb = NULL;
423 				break;
424 
425 			case HCI_EVENT_PKT:
426 				info->rx_state = RECV_WAIT_EVENT_HEADER;
427 				info->rx_count = HCI_EVENT_HDR_SIZE;
428 				break;
429 
430 			case HCI_ACLDATA_PKT:
431 				info->rx_state = RECV_WAIT_ACL_HEADER;
432 				info->rx_count = HCI_ACL_HDR_SIZE;
433 				break;
434 
435 			case HCI_SCODATA_PKT:
436 				info->rx_state = RECV_WAIT_SCO_HEADER;
437 				info->rx_count = HCI_SCO_HDR_SIZE;
438 				break;
439 
440 			default:
441 				/* unknown packet */
442 				printk(KERN_WARNING "bluecard_cs: Unknown HCI packet with type 0x%02x received.\n", info->rx_skb->pkt_type);
443 				info->hdev.stat.err_rx++;
444 
445 				kfree_skb(info->rx_skb);
446 				info->rx_skb = NULL;
447 				break;
448 
449 			}
450 
451 		} else {
452 
453 			*skb_put(info->rx_skb, 1) = buf[i];
454 			info->rx_count--;
455 
456 			if (info->rx_count == 0) {
457 
458 				int dlen;
459 				hci_event_hdr *eh;
460 				hci_acl_hdr *ah;
461 				hci_sco_hdr *sh;
462 
463 				switch (info->rx_state) {
464 
465 				case RECV_WAIT_EVENT_HEADER:
466 					eh = (hci_event_hdr *)(info->rx_skb->data);
467 					info->rx_state = RECV_WAIT_DATA;
468 					info->rx_count = eh->plen;
469 					break;
470 
471 				case RECV_WAIT_ACL_HEADER:
472 					ah = (hci_acl_hdr *)(info->rx_skb->data);
473 					dlen = __le16_to_cpu(ah->dlen);
474 					info->rx_state = RECV_WAIT_DATA;
475 					info->rx_count = dlen;
476 					break;
477 
478 				case RECV_WAIT_SCO_HEADER:
479 					sh = (hci_sco_hdr *)(info->rx_skb->data);
480 					info->rx_state = RECV_WAIT_DATA;
481 					info->rx_count = sh->dlen;
482 					break;
483 
484 				case RECV_WAIT_DATA:
485 					hci_recv_frame(info->rx_skb);
486 					info->rx_skb = NULL;
487 					break;
488 
489 				}
490 
491 			}
492 
493 		}
494 
495 
496 	}
497 
498 	info->hdev.stat.byte_rx += len;
499 }
500 
501 
bluecard_interrupt(int irq,void * dev_inst,struct pt_regs * regs)502 void bluecard_interrupt(int irq, void *dev_inst, struct pt_regs *regs)
503 {
504 	bluecard_info_t *info = dev_inst;
505 	unsigned int iobase;
506 	unsigned char reg;
507 
508 	if (!info) {
509 		printk(KERN_WARNING "bluecard_cs: Call of irq %d for unknown device.\n", irq);
510 		return;
511 	}
512 
513 	if (!test_bit(CARD_READY, &(info->hw_state)))
514 		return;
515 
516 	iobase = info->link.io.BasePort1;
517 
518 	spin_lock(&(info->lock));
519 
520 	/* Disable interrupt */
521 	info->ctrl_reg &= ~REG_CONTROL_INTERRUPT;
522 	outb(info->ctrl_reg, iobase + REG_CONTROL);
523 
524 	reg = inb(iobase + REG_INTERRUPT);
525 
526 	if ((reg != 0x00) && (reg != 0xff)) {
527 
528 		if (reg & 0x04) {
529 			bluecard_receive(info, 0x00);
530 			outb(0x04, iobase + REG_INTERRUPT);
531 			outb(REG_COMMAND_RX_BUF_ONE, iobase + REG_COMMAND);
532 		}
533 
534 		if (reg & 0x08) {
535 			bluecard_receive(info, 0x10);
536 			outb(0x08, iobase + REG_INTERRUPT);
537 			outb(REG_COMMAND_RX_BUF_TWO, iobase + REG_COMMAND);
538 		}
539 
540 		if (reg & 0x01) {
541 			set_bit(XMIT_BUF_ONE_READY, &(info->tx_state));
542 			outb(0x01, iobase + REG_INTERRUPT);
543 			bluecard_write_wakeup(info);
544 		}
545 
546 		if (reg & 0x02) {
547 			set_bit(XMIT_BUF_TWO_READY, &(info->tx_state));
548 			outb(0x02, iobase + REG_INTERRUPT);
549 			bluecard_write_wakeup(info);
550 		}
551 
552 	}
553 
554 	/* Enable interrupt */
555 	info->ctrl_reg |= REG_CONTROL_INTERRUPT;
556 	outb(info->ctrl_reg, iobase + REG_CONTROL);
557 
558 	spin_unlock(&(info->lock));
559 }
560 
561 
562 
563 /* ======================== Device specific HCI commands ======================== */
564 
565 
bluecard_hci_set_baud_rate(struct hci_dev * hdev,int baud)566 static int bluecard_hci_set_baud_rate(struct hci_dev *hdev, int baud)
567 {
568 	bluecard_info_t *info = (bluecard_info_t *)(hdev->driver_data);
569 	struct sk_buff *skb;
570 
571 	/* Ericsson baud rate command */
572 	unsigned char cmd[] = { HCI_COMMAND_PKT, 0x09, 0xfc, 0x01, 0x03 };
573 
574 	if (!(skb = bluez_skb_alloc(HCI_MAX_FRAME_SIZE, GFP_ATOMIC))) {
575 		printk(KERN_WARNING "bluecard_cs: Can't allocate mem for new packet.\n");
576 		return -1;
577 	}
578 
579 	switch (baud) {
580 	case 460800:
581 		cmd[4] = 0x00;
582 		skb->pkt_type = PKT_BAUD_RATE_460800;
583 		break;
584 	case 230400:
585 		cmd[4] = 0x01;
586 		skb->pkt_type = PKT_BAUD_RATE_230400;
587 		break;
588 	case 115200:
589 		cmd[4] = 0x02;
590 		skb->pkt_type = PKT_BAUD_RATE_115200;
591 		break;
592 	case 57600:
593 		/* Fall through... */
594 	default:
595 		cmd[4] = 0x03;
596 		skb->pkt_type = PKT_BAUD_RATE_57600;
597 		break;
598 	}
599 
600 	memcpy(skb_put(skb, sizeof(cmd)), cmd, sizeof(cmd));
601 
602 	skb_queue_tail(&(info->txq), skb);
603 
604 	bluecard_write_wakeup(info);
605 
606 	return 0;
607 }
608 
609 
610 
611 /* ======================== HCI interface ======================== */
612 
613 
bluecard_hci_flush(struct hci_dev * hdev)614 static int bluecard_hci_flush(struct hci_dev *hdev)
615 {
616 	bluecard_info_t *info = (bluecard_info_t *)(hdev->driver_data);
617 
618 	/* Drop TX queue */
619 	skb_queue_purge(&(info->txq));
620 
621 	return 0;
622 }
623 
624 
bluecard_hci_open(struct hci_dev * hdev)625 static int bluecard_hci_open(struct hci_dev *hdev)
626 {
627 	bluecard_info_t *info = (bluecard_info_t *)(hdev->driver_data);
628 	unsigned int iobase = info->link.io.BasePort1;
629 
630 	bluecard_hci_set_baud_rate(hdev, DEFAULT_BAUD_RATE);
631 
632 	if (test_and_set_bit(HCI_RUNNING, &(hdev->flags)))
633 		return 0;
634 
635 	/* Enable LED */
636 	outb(0x08 | 0x20, iobase + 0x30);
637 
638 	return 0;
639 }
640 
641 
bluecard_hci_close(struct hci_dev * hdev)642 static int bluecard_hci_close(struct hci_dev *hdev)
643 {
644 	bluecard_info_t *info = (bluecard_info_t *)(hdev->driver_data);
645 	unsigned int iobase = info->link.io.BasePort1;
646 
647 	if (!test_and_clear_bit(HCI_RUNNING, &(hdev->flags)))
648 		return 0;
649 
650 	bluecard_hci_flush(hdev);
651 
652 	/* Disable LED */
653 	outb(0x00, iobase + 0x30);
654 
655 	return 0;
656 }
657 
658 
bluecard_hci_send_frame(struct sk_buff * skb)659 static int bluecard_hci_send_frame(struct sk_buff *skb)
660 {
661 	bluecard_info_t *info;
662 	struct hci_dev *hdev = (struct hci_dev *)(skb->dev);
663 
664 	if (!hdev) {
665 		printk(KERN_WARNING "bluecard_cs: Frame for unknown HCI device (hdev=NULL).");
666 		return -ENODEV;
667 	}
668 
669 	info = (bluecard_info_t *)(hdev->driver_data);
670 
671 	switch (skb->pkt_type) {
672 	case HCI_COMMAND_PKT:
673 		hdev->stat.cmd_tx++;
674 		break;
675 	case HCI_ACLDATA_PKT:
676 		hdev->stat.acl_tx++;
677 		break;
678 	case HCI_SCODATA_PKT:
679 		hdev->stat.sco_tx++;
680 		break;
681 	};
682 
683 	/* Prepend skb with frame type */
684 	memcpy(skb_push(skb, 1), &(skb->pkt_type), 1);
685 	skb_queue_tail(&(info->txq), skb);
686 
687 	bluecard_write_wakeup(info);
688 
689 	return 0;
690 }
691 
692 
bluecard_hci_destruct(struct hci_dev * hdev)693 static void bluecard_hci_destruct(struct hci_dev *hdev)
694 {
695 }
696 
697 
bluecard_hci_ioctl(struct hci_dev * hdev,unsigned int cmd,unsigned long arg)698 static int bluecard_hci_ioctl(struct hci_dev *hdev, unsigned int cmd, unsigned long arg)
699 {
700 	return -ENOIOCTLCMD;
701 }
702 
703 
704 
705 /* ======================== Card services HCI interaction ======================== */
706 
707 
bluecard_open(bluecard_info_t * info)708 int bluecard_open(bluecard_info_t *info)
709 {
710 	unsigned int iobase = info->link.io.BasePort1;
711 	struct hci_dev *hdev;
712 	unsigned char id;
713 
714 	spin_lock_init(&(info->lock));
715 
716 	init_timer(&(info->timer));
717 	info->timer.function = &bluecard_activity_led_timeout;
718 	info->timer.data = (u_long)info;
719 
720 	skb_queue_head_init(&(info->txq));
721 
722 	info->rx_state = RECV_WAIT_PACKET_TYPE;
723 	info->rx_count = 0;
724 	info->rx_skb = NULL;
725 
726 	id = inb(iobase + 0x30);
727 
728 	if ((id & 0x0f) == 0x02)
729 		set_bit(CARD_HAS_PCCARD_ID, &(info->hw_state));
730 
731 	if (id & 0x10)
732 		set_bit(CARD_HAS_POWER_LED, &(info->hw_state));
733 
734 	if (id & 0x20)
735 		set_bit(CARD_HAS_ACTIVITY_LED, &(info->hw_state));
736 
737 	/* Reset card */
738 	info->ctrl_reg = REG_CONTROL_BT_RESET | REG_CONTROL_CARD_RESET;
739 	outb(info->ctrl_reg, iobase + REG_CONTROL);
740 
741 	/* Turn FPGA off */
742 	outb(0x80, iobase + 0x30);
743 
744 	/* Wait some time */
745 	set_current_state(TASK_INTERRUPTIBLE);
746 	schedule_timeout(HZ / 100);
747 
748 	/* Turn FPGA on */
749 	outb(0x00, iobase + 0x30);
750 
751 	/* Activate card */
752 	info->ctrl_reg = REG_CONTROL_BT_ON | REG_CONTROL_BT_RES_PU;
753 	outb(info->ctrl_reg, iobase + REG_CONTROL);
754 
755 	/* Enable interrupt */
756 	outb(0xff, iobase + REG_INTERRUPT);
757 	info->ctrl_reg |= REG_CONTROL_INTERRUPT;
758 	outb(info->ctrl_reg, iobase + REG_CONTROL);
759 
760 	/* Start the RX buffers */
761 	outb(REG_COMMAND_RX_BUF_ONE, iobase + REG_COMMAND);
762 	outb(REG_COMMAND_RX_BUF_TWO, iobase + REG_COMMAND);
763 
764 	/* Signal that the hardware is ready */
765 	set_bit(CARD_READY, &(info->hw_state));
766 
767 	/* Drop TX queue */
768 	skb_queue_purge(&(info->txq));
769 
770 	/* Control the point at which RTS is enabled */
771 	outb((0x0f << RTS_LEVEL_SHIFT_BITS) | 1, iobase + REG_RX_CONTROL);
772 
773 	/* Timeout before it is safe to send the first HCI packet */
774 	set_current_state(TASK_INTERRUPTIBLE);
775 	schedule_timeout((HZ * 5) / 4);		// or set it to 3/2
776 
777 
778 	/* Initialize and register HCI device */
779 
780 	hdev = &(info->hdev);
781 
782 	hdev->type = HCI_PCCARD;
783 	hdev->driver_data = info;
784 
785 	hdev->open = bluecard_hci_open;
786 	hdev->close = bluecard_hci_close;
787 	hdev->flush = bluecard_hci_flush;
788 	hdev->send = bluecard_hci_send_frame;
789 	hdev->destruct = bluecard_hci_destruct;
790 	hdev->ioctl = bluecard_hci_ioctl;
791 
792 	if (hci_register_dev(hdev) < 0) {
793 		printk(KERN_WARNING "bluecard_cs: Can't register HCI device %s.\n", hdev->name);
794 		return -ENODEV;
795 	}
796 
797 	return 0;
798 }
799 
800 
bluecard_close(bluecard_info_t * info)801 int bluecard_close(bluecard_info_t *info)
802 {
803 	unsigned int iobase = info->link.io.BasePort1;
804 	struct hci_dev *hdev = &(info->hdev);
805 
806 	if (info->link.state & DEV_CONFIG_PENDING)
807 		return -ENODEV;
808 
809 	bluecard_hci_close(hdev);
810 
811 	clear_bit(CARD_READY, &(info->hw_state));
812 
813 	/* Reset card */
814 	info->ctrl_reg = REG_CONTROL_BT_RESET | REG_CONTROL_CARD_RESET;
815 	outb(info->ctrl_reg, iobase + REG_CONTROL);
816 
817 	/* Turn FPGA off */
818 	outb(0x80, iobase + 0x30);
819 
820 	if (hci_unregister_dev(hdev) < 0)
821 		printk(KERN_WARNING "bluecard_cs: Can't unregister HCI device %s.\n", hdev->name);
822 
823 	return 0;
824 }
825 
826 
827 
828 /* ======================== Card services ======================== */
829 
830 
cs_error(client_handle_t handle,int func,int ret)831 static void cs_error(client_handle_t handle, int func, int ret)
832 {
833 	error_info_t err = { func, ret };
834 
835 	CardServices(ReportError, handle, &err);
836 }
837 
838 
bluecard_attach(void)839 dev_link_t *bluecard_attach(void)
840 {
841 	bluecard_info_t *info;
842 	client_reg_t client_reg;
843 	dev_link_t *link;
844 	int i, ret;
845 
846 	/* Create new info device */
847 	info = kmalloc(sizeof(*info), GFP_KERNEL);
848 	if (!info)
849 		return NULL;
850 	memset(info, 0, sizeof(*info));
851 
852 	link = &info->link;
853 	link->priv = info;
854 
855 	link->release.function = &bluecard_release;
856 	link->release.data = (u_long)link;
857 	link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
858 	link->io.NumPorts1 = 8;
859 	link->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT;
860 	link->irq.IRQInfo1 = IRQ_INFO2_VALID | IRQ_LEVEL_ID;
861 
862 	if (irq_list[0] == -1)
863 		link->irq.IRQInfo2 = irq_mask;
864 	else
865 		for (i = 0; i < 4; i++)
866 			link->irq.IRQInfo2 |= 1 << irq_list[i];
867 
868 	link->irq.Handler = bluecard_interrupt;
869 	link->irq.Instance = info;
870 
871 	link->conf.Attributes = CONF_ENABLE_IRQ;
872 	link->conf.Vcc = 50;
873 	link->conf.IntType = INT_MEMORY_AND_IO;
874 
875 	/* Register with Card Services */
876 	link->next = dev_list;
877 	dev_list = link;
878 	client_reg.dev_info = &dev_info;
879 	client_reg.Attributes = INFO_IO_CLIENT | INFO_CARD_SHARE;
880 	client_reg.EventMask =
881 		CS_EVENT_CARD_INSERTION | CS_EVENT_CARD_REMOVAL |
882 		CS_EVENT_RESET_PHYSICAL | CS_EVENT_CARD_RESET |
883 		CS_EVENT_PM_SUSPEND | CS_EVENT_PM_RESUME;
884 	client_reg.event_handler = &bluecard_event;
885 	client_reg.Version = 0x0210;
886 	client_reg.event_callback_args.client_data = link;
887 
888 	ret = CardServices(RegisterClient, &link->handle, &client_reg);
889 	if (ret != CS_SUCCESS) {
890 		cs_error(link->handle, RegisterClient, ret);
891 		bluecard_detach(link);
892 		return NULL;
893 	}
894 
895 	return link;
896 }
897 
898 
bluecard_detach(dev_link_t * link)899 void bluecard_detach(dev_link_t *link)
900 {
901 	bluecard_info_t *info = link->priv;
902 	dev_link_t **linkp;
903 	int ret;
904 
905 	/* Locate device structure */
906 	for (linkp = &dev_list; *linkp; linkp = &(*linkp)->next)
907 		if (*linkp == link)
908 			break;
909 
910 	if (*linkp == NULL)
911 		return;
912 
913 	del_timer(&link->release);
914 	if (link->state & DEV_CONFIG)
915 		bluecard_release((u_long)link);
916 
917 	if (link->handle) {
918 		ret = CardServices(DeregisterClient, link->handle);
919 		if (ret != CS_SUCCESS)
920 			cs_error(link->handle, DeregisterClient, ret);
921 	}
922 
923 	/* Unlink device structure, free bits */
924 	*linkp = link->next;
925 
926 	kfree(info);
927 }
928 
929 
get_tuple(int fn,client_handle_t handle,tuple_t * tuple,cisparse_t * parse)930 static int get_tuple(int fn, client_handle_t handle, tuple_t *tuple, cisparse_t *parse)
931 {
932 	int i;
933 
934 	i = CardServices(fn, handle, tuple);
935 	if (i != CS_SUCCESS)
936 		return CS_NO_MORE_ITEMS;
937 
938 	i = CardServices(GetTupleData, handle, tuple);
939 	if (i != CS_SUCCESS)
940 		return i;
941 
942 	return CardServices(ParseTuple, handle, tuple, parse);
943 }
944 
945 
946 #define first_tuple(a, b, c) get_tuple(GetFirstTuple, a, b, c)
947 #define next_tuple(a, b, c) get_tuple(GetNextTuple, a, b, c)
948 
bluecard_config(dev_link_t * link)949 void bluecard_config(dev_link_t *link)
950 {
951 	client_handle_t handle = link->handle;
952 	bluecard_info_t *info = link->priv;
953 	tuple_t tuple;
954 	u_short buf[256];
955 	cisparse_t parse;
956 	config_info_t config;
957 	int i, n, last_ret, last_fn;
958 
959 	tuple.TupleData = (cisdata_t *)buf;
960 	tuple.TupleOffset = 0;
961 	tuple.TupleDataMax = 255;
962 	tuple.Attributes = 0;
963 
964 	/* Get configuration register information */
965 	tuple.DesiredTuple = CISTPL_CONFIG;
966 	last_ret = first_tuple(handle, &tuple, &parse);
967 	if (last_ret != CS_SUCCESS) {
968 		last_fn = ParseTuple;
969 		goto cs_failed;
970 	}
971 	link->conf.ConfigBase = parse.config.base;
972 	link->conf.Present = parse.config.rmask[0];
973 
974 	/* Configure card */
975 	link->state |= DEV_CONFIG;
976 	i = CardServices(GetConfigurationInfo, handle, &config);
977 	link->conf.Vcc = config.Vcc;
978 
979 	link->conf.ConfigIndex = 0x20;
980 	link->io.NumPorts1 = 64;
981 	link->io.IOAddrLines = 6;
982 
983 	for (n = 0; n < 0x400; n += 0x40) {
984 		link->io.BasePort1 = n ^ 0x300;
985 		i = CardServices(RequestIO, link->handle, &link->io);
986 		if (i == CS_SUCCESS)
987 			break;
988 	}
989 
990 	if (i != CS_SUCCESS) {
991 		cs_error(link->handle, RequestIO, i);
992 		goto failed;
993 	}
994 
995 	i = CardServices(RequestIRQ, link->handle, &link->irq);
996 	if (i != CS_SUCCESS) {
997 		cs_error(link->handle, RequestIRQ, i);
998 		link->irq.AssignedIRQ = 0;
999 	}
1000 
1001 	i = CardServices(RequestConfiguration, link->handle, &link->conf);
1002 	if (i != CS_SUCCESS) {
1003 		cs_error(link->handle, RequestConfiguration, i);
1004 		goto failed;
1005 	}
1006 
1007 	MOD_INC_USE_COUNT;
1008 
1009 	if (bluecard_open(info) != 0)
1010 		goto failed;
1011 
1012 	strcpy(info->node.dev_name, info->hdev.name);
1013 	link->dev = &info->node;
1014 	link->state &= ~DEV_CONFIG_PENDING;
1015 
1016 	return;
1017 
1018 cs_failed:
1019 	cs_error(link->handle, last_fn, last_ret);
1020 
1021 failed:
1022 	bluecard_release((u_long)link);
1023 }
1024 
1025 
bluecard_release(u_long arg)1026 void bluecard_release(u_long arg)
1027 {
1028 	dev_link_t *link = (dev_link_t *)arg;
1029 	bluecard_info_t *info = link->priv;
1030 
1031 	if (link->state & DEV_PRESENT)
1032 		bluecard_close(info);
1033 
1034 	MOD_DEC_USE_COUNT;
1035 
1036 	link->dev = NULL;
1037 
1038 	CardServices(ReleaseConfiguration, link->handle);
1039 	CardServices(ReleaseIO, link->handle, &link->io);
1040 	CardServices(ReleaseIRQ, link->handle, &link->irq);
1041 
1042 	link->state &= ~DEV_CONFIG;
1043 }
1044 
1045 
bluecard_event(event_t event,int priority,event_callback_args_t * args)1046 int bluecard_event(event_t event, int priority, event_callback_args_t *args)
1047 {
1048 	dev_link_t *link = args->client_data;
1049 	bluecard_info_t *info = link->priv;
1050 
1051 	switch (event) {
1052 	case CS_EVENT_CARD_REMOVAL:
1053 		link->state &= ~DEV_PRESENT;
1054 		if (link->state & DEV_CONFIG) {
1055 			bluecard_close(info);
1056 			mod_timer(&link->release, jiffies + HZ / 20);
1057 		}
1058 		break;
1059 	case CS_EVENT_CARD_INSERTION:
1060 		link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
1061 		bluecard_config(link);
1062 		break;
1063 	case CS_EVENT_PM_SUSPEND:
1064 		link->state |= DEV_SUSPEND;
1065 		/* Fall through... */
1066 	case CS_EVENT_RESET_PHYSICAL:
1067 		if (link->state & DEV_CONFIG)
1068 			CardServices(ReleaseConfiguration, link->handle);
1069 		break;
1070 	case CS_EVENT_PM_RESUME:
1071 		link->state &= ~DEV_SUSPEND;
1072 		/* Fall through... */
1073 	case CS_EVENT_CARD_RESET:
1074 		if (DEV_OK(link))
1075 			CardServices(RequestConfiguration, link->handle, &link->conf);
1076 		break;
1077 	}
1078 
1079 	return 0;
1080 }
1081 
1082 
1083 
1084 /* ======================== Module initialization ======================== */
1085 
1086 
init_bluecard_cs(void)1087 int __init init_bluecard_cs(void)
1088 {
1089 	servinfo_t serv;
1090 	int err;
1091 
1092 	CardServices(GetCardServicesInfo, &serv);
1093 	if (serv.Revision != CS_RELEASE_CODE) {
1094 		printk(KERN_NOTICE "bluecard_cs: Card Services release does not match!\n");
1095 		return -1;
1096 	}
1097 
1098 	err = register_pccard_driver(&dev_info, &bluecard_attach, &bluecard_detach);
1099 
1100 	return err;
1101 }
1102 
1103 
exit_bluecard_cs(void)1104 void __exit exit_bluecard_cs(void)
1105 {
1106 	unregister_pccard_driver(&dev_info);
1107 
1108 	while (dev_list != NULL)
1109 		bluecard_detach(dev_list);
1110 }
1111 
1112 
1113 module_init(init_bluecard_cs);
1114 module_exit(exit_bluecard_cs);
1115 
1116 EXPORT_NO_SYMBOLS;
1117