1#
2# ATM device configuration
3#
4mainmenu_option next_comment
5comment 'ATM drivers'
6if [ "$CONFIG_INET" = "y" ]; then
7   dep_tristate 'ATM over TCP' CONFIG_ATM_TCP $CONFIG_ATM
8fi
9if [ "$CONFIG_PCI" = "y" ]; then
10   dep_tristate 'Efficient Networks Speedstream 3010' CONFIG_ATM_LANAI $CONFIG_ATM
11   dep_tristate 'Efficient Networks ENI155P' CONFIG_ATM_ENI $CONFIG_ATM
12   if [ "$CONFIG_ATM_ENI" != "n" ]; then
13      bool '  Enable extended debugging' CONFIG_ATM_ENI_DEBUG
14      bool '  Fine-tune burst settings' CONFIG_ATM_ENI_TUNE_BURST
15      if [ "$CONFIG_ATM_ENI_TUNE_BURST" = "y" ]; then
16	 bool '    Enable 16W TX bursts (discouraged)' CONFIG_ATM_ENI_BURST_TX_16W
17	 bool '    Enable 8W TX bursts (recommended)' CONFIG_ATM_ENI_BURST_TX_8W
18	 bool '    Enable 4W TX bursts (optional)' CONFIG_ATM_ENI_BURST_TX_4W
19	 bool '    Enable 2W TX bursts (optional)' CONFIG_ATM_ENI_BURST_TX_2W
20	 bool '    Enable 16W RX bursts (discouraged)' CONFIG_ATM_ENI_BURST_RX_16W
21	 bool '    Enable 8W RX bursts (discouraged)' CONFIG_ATM_ENI_BURST_RX_8W
22	 bool '    Enable 4W RX bursts (recommended)' CONFIG_ATM_ENI_BURST_RX_4W
23	 bool '    Enable 2W RX bursts (optional)' CONFIG_ATM_ENI_BURST_RX_2W
24      fi
25   fi
26   dep_tristate 'Fujitsu FireStream (FS50/FS155) ' CONFIG_ATM_FIRESTREAM $CONFIG_ATM
27   dep_tristate 'ZeitNet ZN1221/ZN1225' CONFIG_ATM_ZATM $CONFIG_ATM
28   if [ "$CONFIG_ATM_ZATM" != "n" ]; then
29      bool '  Enable extended debugging' CONFIG_ATM_ZATM_DEBUG
30      if [ "$CONFIG_X86" = "y" ]; then
31	bool '  Enable usec resolution timestamps' CONFIG_ATM_ZATM_EXACT_TS
32      fi
33   fi
34#   bool 'Rolfs TI TNETA1570' CONFIG_ATM_TNETA1570 y
35#   if [ "$CONFIG_ATM_TNETA1570" = "y" ]; then
36#      bool '  Enable extended debugging' CONFIG_ATM_TNETA1570_DEBUG n
37#   fi
38   dep_tristate 'IDT 77201 (NICStAR) (ForeRunnerLE)' CONFIG_ATM_NICSTAR $CONFIG_ATM
39   if [ "$CONFIG_ATM_NICSTAR" != "n" ]; then
40      bool '  Use suni PHY driver (155Mbps)' CONFIG_ATM_NICSTAR_USE_SUNI
41      bool '  Use IDT77015 PHY driver (25Mbps)' CONFIG_ATM_NICSTAR_USE_IDT77105
42   fi
43   dep_tristate 'IDT 77252 (NICStAR II)' CONFIG_ATM_IDT77252 $CONFIG_ATM
44   if [ "$CONFIG_ATM_IDT77252" != "n" ]; then
45      bool '  Enable debugging messages' CONFIG_ATM_IDT77252_DEBUG
46      bool '  Receive ALL cells in raw queue' CONFIG_ATM_IDT77252_RCV_ALL
47      define_bool CONFIG_ATM_IDT77252_USE_SUNI y
48   fi
49   dep_tristate 'Madge Ambassador (Collage PCI 155 Server)' CONFIG_ATM_AMBASSADOR $CONFIG_ATM
50   if [ "$CONFIG_ATM_AMBASSADOR" != "n" ]; then
51      bool '  Enable debugging messages' CONFIG_ATM_AMBASSADOR_DEBUG
52   fi
53   dep_tristate 'Madge Horizon [Ultra] (Collage PCI 25 and Collage PCI 155 Client)' CONFIG_ATM_HORIZON $CONFIG_ATM
54   if [ "$CONFIG_ATM_HORIZON" != "n" ]; then
55      bool '  Enable debugging messages' CONFIG_ATM_HORIZON_DEBUG
56   fi
57   dep_tristate 'Interphase ATM PCI x575/x525/x531' CONFIG_ATM_IA $CONFIG_ATM
58   if [ "$CONFIG_ATM_IA" != "n" ]; then
59     bool '  Enable debugging messages' CONFIG_ATM_IA_DEBUG
60   fi
61fi
62if [ "$CONFIG_PCI" = "y" -o "$CONFIG_SBUS" = "y" ]; then
63  dep_tristate 'FORE Systems 200E-series' CONFIG_ATM_FORE200E_MAYBE $CONFIG_ATM
64  if [ "$CONFIG_ATM_FORE200E_MAYBE" != "n" ]; then
65    if [ "$CONFIG_PCI" = "y" ]; then
66      bool '  PCA-200E support' CONFIG_ATM_FORE200E_PCA
67      if [ "$CONFIG_ATM_FORE200E_PCA" = "y" ]; then
68	bool '   Use default PCA-200E firmware (normally enabled)' CONFIG_ATM_FORE200E_PCA_DEFAULT_FW
69        if [ "$CONFIG_ATM_FORE200E_PCA_DEFAULT_FW" = "n" ]; then
70          string '   Pathname of user-supplied binary firmware' CONFIG_ATM_FORE200E_PCA_FW ""
71        fi
72      fi
73    fi
74    if [ "$CONFIG_SBUS" = "y" ]; then
75      bool '  SBA-200E support' CONFIG_ATM_FORE200E_SBA
76      if [ "$CONFIG_ATM_FORE200E_SBA" = "y" ]; then
77        bool '   Use default SBA-200E firmware (normally enabled)' CONFIG_ATM_FORE200E_SBA_DEFAULT_FW
78        if [ "$CONFIG_ATM_FORE200E_SBA_DEFAULT_FW" = "n" ]; then
79          string '   Pathname of user-supplied binary firmware' CONFIG_ATM_FORE200E_SBA_FW ""
80        fi
81      fi
82    fi
83  fi
84  if [ "$CONFIG_ATM_FORE200E_PCA" = "y" -o "$CONFIG_ATM_FORE200E_SBA" = "y" ]; \
85    then
86    bool '  Defer interrupt work to a tasklet' CONFIG_ATM_FORE200E_USE_TASKLET
87    int  '  Maximum number of tx retries' CONFIG_ATM_FORE200E_TX_RETRY 16
88    int  '  Debugging level (0-3)' CONFIG_ATM_FORE200E_DEBUG 0
89    if [ "$CONFIG_ATM_FORE200E_MAYBE" = "y" ]; then
90      define_tristate CONFIG_ATM_FORE200E y
91    else
92      define_tristate CONFIG_ATM_FORE200E m
93    fi
94  fi
95fi
96if [ "$CONFIG_PCI" = "y" ]; then
97  dep_tristate 'ForeRunner HE Series' CONFIG_ATM_HE $CONFIG_ATM
98  if [ "$CONFIG_ATM_HE" != "n" ]; then
99    bool 'Use S/UNI PHY driver' CONFIG_ATM_HE_USE_SUNI
100  fi
101fi
102endmenu
103