1 /*
2 * SMC 37C93X initialization code
3 */
4
5 #include <linux/config.h>
6 #include <linux/kernel.h>
7
8 #include <linux/slab.h>
9 #include <linux/mm.h>
10 #include <linux/init.h>
11 #include <linux/delay.h>
12
13 #include <asm/hwrpb.h>
14 #include <asm/io.h>
15 #include <asm/segment.h>
16
17 #define SMC_DEBUG 0
18
19 #if SMC_DEBUG
20 # define DBG_DEVS(args) printk args
21 #else
22 # define DBG_DEVS(args)
23 #endif
24
25 #define KB 1024
26 #define MB (1024*KB)
27 #define GB (1024*MB)
28
29 /* device "activate" register contents */
30 #define DEVICE_ON 1
31 #define DEVICE_OFF 0
32
33 /* configuration on/off keys */
34 #define CONFIG_ON_KEY 0x55
35 #define CONFIG_OFF_KEY 0xaa
36
37 /* configuration space device definitions */
38 #define FDC 0
39 #define IDE1 1
40 #define IDE2 2
41 #define PARP 3
42 #define SER1 4
43 #define SER2 5
44 #define RTCL 6
45 #define KYBD 7
46 #define AUXIO 8
47
48 /* Chip register offsets from base */
49 #define CONFIG_CONTROL 0x02
50 #define INDEX_ADDRESS 0x03
51 #define LOGICAL_DEVICE_NUMBER 0x07
52 #define DEVICE_ID 0x20
53 #define DEVICE_REV 0x21
54 #define POWER_CONTROL 0x22
55 #define POWER_MGMT 0x23
56 #define OSC 0x24
57
58 #define ACTIVATE 0x30
59 #define ADDR_HI 0x60
60 #define ADDR_LO 0x61
61 #define INTERRUPT_SEL 0x70
62 #define INTERRUPT_SEL_2 0x72 /* KYBD/MOUS only */
63 #define DMA_CHANNEL_SEL 0x74 /* FDC/PARP only */
64
65 #define FDD_MODE_REGISTER 0x90
66 #define FDD_OPTION_REGISTER 0x91
67
68 /* values that we read back that are expected ... */
69 #define VALID_DEVICE_ID 2
70
71 /* default device addresses */
72 #define KYBD_INTERRUPT 1
73 #define MOUS_INTERRUPT 12
74 #define COM2_BASE 0x2f8
75 #define COM2_INTERRUPT 3
76 #define COM1_BASE 0x3f8
77 #define COM1_INTERRUPT 4
78 #define PARP_BASE 0x3bc
79 #define PARP_INTERRUPT 7
80
SMCConfigState(unsigned long baseAddr)81 static unsigned long __init SMCConfigState(unsigned long baseAddr)
82 {
83 unsigned char devId;
84 unsigned char devRev;
85
86 unsigned long configPort;
87 unsigned long indexPort;
88 unsigned long dataPort;
89
90 int i;
91
92 configPort = indexPort = baseAddr;
93 dataPort = configPort + 1;
94
95 #define NUM_RETRIES 5
96
97 for (i = 0; i < NUM_RETRIES; i++)
98 {
99 outb(CONFIG_ON_KEY, configPort);
100 outb(CONFIG_ON_KEY, configPort);
101 outb(DEVICE_ID, indexPort);
102 devId = inb(dataPort);
103 if (devId == VALID_DEVICE_ID) {
104 outb(DEVICE_REV, indexPort);
105 devRev = inb(dataPort);
106 break;
107 }
108 else
109 udelay(100);
110 }
111 return (i != NUM_RETRIES) ? baseAddr : 0L;
112 }
113
SMCRunState(unsigned long baseAddr)114 static void __init SMCRunState(unsigned long baseAddr)
115 {
116 outb(CONFIG_OFF_KEY, baseAddr);
117 }
118
SMCDetectUltraIO(void)119 static unsigned long __init SMCDetectUltraIO(void)
120 {
121 unsigned long baseAddr;
122
123 baseAddr = 0x3F0;
124 if ( ( baseAddr = SMCConfigState( baseAddr ) ) == 0x3F0 ) {
125 return( baseAddr );
126 }
127 baseAddr = 0x370;
128 if ( ( baseAddr = SMCConfigState( baseAddr ) ) == 0x370 ) {
129 return( baseAddr );
130 }
131 return( ( unsigned long )0 );
132 }
133
SMCEnableDevice(unsigned long baseAddr,unsigned long device,unsigned long portaddr,unsigned long interrupt)134 static void __init SMCEnableDevice(unsigned long baseAddr,
135 unsigned long device,
136 unsigned long portaddr,
137 unsigned long interrupt)
138 {
139 unsigned long indexPort;
140 unsigned long dataPort;
141
142 indexPort = baseAddr;
143 dataPort = baseAddr + 1;
144
145 outb(LOGICAL_DEVICE_NUMBER, indexPort);
146 outb(device, dataPort);
147
148 outb(ADDR_LO, indexPort);
149 outb(( portaddr & 0xFF ), dataPort);
150
151 outb(ADDR_HI, indexPort);
152 outb((portaddr >> 8) & 0xFF, dataPort);
153
154 outb(INTERRUPT_SEL, indexPort);
155 outb(interrupt, dataPort);
156
157 outb(ACTIVATE, indexPort);
158 outb(DEVICE_ON, dataPort);
159 }
160
SMCEnableKYBD(unsigned long baseAddr)161 static void __init SMCEnableKYBD(unsigned long baseAddr)
162 {
163 unsigned long indexPort;
164 unsigned long dataPort;
165
166 indexPort = baseAddr;
167 dataPort = baseAddr + 1;
168
169 outb(LOGICAL_DEVICE_NUMBER, indexPort);
170 outb(KYBD, dataPort);
171
172 outb(INTERRUPT_SEL, indexPort); /* Primary interrupt select */
173 outb(KYBD_INTERRUPT, dataPort);
174
175 outb(INTERRUPT_SEL_2, indexPort); /* Secondary interrupt select */
176 outb(MOUS_INTERRUPT, dataPort);
177
178 outb(ACTIVATE, indexPort);
179 outb(DEVICE_ON, dataPort);
180 }
181
SMCEnableFDC(unsigned long baseAddr)182 static void __init SMCEnableFDC(unsigned long baseAddr)
183 {
184 unsigned long indexPort;
185 unsigned long dataPort;
186
187 unsigned char oldValue;
188
189 indexPort = baseAddr;
190 dataPort = baseAddr + 1;
191
192 outb(LOGICAL_DEVICE_NUMBER, indexPort);
193 outb(FDC, dataPort);
194
195 outb(FDD_MODE_REGISTER, indexPort);
196 oldValue = inb(dataPort);
197
198 oldValue |= 0x0E; /* Enable burst mode */
199 outb(oldValue, dataPort);
200
201 outb(INTERRUPT_SEL, indexPort); /* Primary interrupt select */
202 outb(0x06, dataPort );
203
204 outb(DMA_CHANNEL_SEL, indexPort); /* DMA channel select */
205 outb(0x02, dataPort);
206
207 outb(ACTIVATE, indexPort);
208 outb(DEVICE_ON, dataPort);
209 }
210
211 #if SMC_DEBUG
SMCReportDeviceStatus(unsigned long baseAddr)212 static void __init SMCReportDeviceStatus(unsigned long baseAddr)
213 {
214 unsigned long indexPort;
215 unsigned long dataPort;
216 unsigned char currentControl;
217
218 indexPort = baseAddr;
219 dataPort = baseAddr + 1;
220
221 outb(POWER_CONTROL, indexPort);
222 currentControl = inb(dataPort);
223
224 printk(currentControl & (1 << FDC)
225 ? "\t+FDC Enabled\n" : "\t-FDC Disabled\n");
226 printk(currentControl & (1 << IDE1)
227 ? "\t+IDE1 Enabled\n" : "\t-IDE1 Disabled\n");
228 printk(currentControl & (1 << IDE2)
229 ? "\t+IDE2 Enabled\n" : "\t-IDE2 Disabled\n");
230 printk(currentControl & (1 << PARP)
231 ? "\t+PARP Enabled\n" : "\t-PARP Disabled\n");
232 printk(currentControl & (1 << SER1)
233 ? "\t+SER1 Enabled\n" : "\t-SER1 Disabled\n");
234 printk(currentControl & (1 << SER2)
235 ? "\t+SER2 Enabled\n" : "\t-SER2 Disabled\n");
236
237 printk( "\n" );
238 }
239 #endif
240
SMC93x_Init(void)241 int __init SMC93x_Init(void)
242 {
243 unsigned long SMCUltraBase;
244 unsigned long flags;
245
246 __save_and_cli(flags);
247 if ((SMCUltraBase = SMCDetectUltraIO()) != 0UL) {
248 #if SMC_DEBUG
249 SMCReportDeviceStatus(SMCUltraBase);
250 #endif
251 SMCEnableDevice(SMCUltraBase, SER1, COM1_BASE, COM1_INTERRUPT);
252 DBG_DEVS(("SMC FDC37C93X: SER1 done\n"));
253 SMCEnableDevice(SMCUltraBase, SER2, COM2_BASE, COM2_INTERRUPT);
254 DBG_DEVS(("SMC FDC37C93X: SER2 done\n"));
255 SMCEnableDevice(SMCUltraBase, PARP, PARP_BASE, PARP_INTERRUPT);
256 DBG_DEVS(("SMC FDC37C93X: PARP done\n"));
257 /* On PC164, IDE on the SMC is not enabled;
258 CMD646 (PCI) on MB */
259 SMCEnableKYBD(SMCUltraBase);
260 DBG_DEVS(("SMC FDC37C93X: KYB done\n"));
261 SMCEnableFDC(SMCUltraBase);
262 DBG_DEVS(("SMC FDC37C93X: FDC done\n"));
263 #if SMC_DEBUG
264 SMCReportDeviceStatus(SMCUltraBase);
265 #endif
266 SMCRunState(SMCUltraBase);
267 __restore_flags(flags);
268 printk("SMC FDC37C93X Ultra I/O Controller found @ 0x%lx\n",
269 SMCUltraBase);
270 return 1;
271 }
272 else {
273 __restore_flags(flags);
274 DBG_DEVS(("No SMC FDC37C93X Ultra I/O Controller found\n"));
275 return 0;
276 }
277 }
278