/linux-6.6.21/drivers/media/pci/cx23885/ |
D | cx23885-f300.c | 20 #define F300_DATA GPIO_0
|
D | cx23885-cards.c | 1718 cx23885_gpio_enable(dev, GPIO_0 | GPIO_1 | GPIO_2, 1); in cx23885_gpio_setup() 1721 cx23885_gpio_set(dev, GPIO_0 | GPIO_1 | GPIO_2); in cx23885_gpio_setup() 1727 cx23885_gpio_enable(dev, GPIO_0 | GPIO_1, 1); in cx23885_gpio_setup() 1728 cx23885_gpio_clear(dev, GPIO_0 | GPIO_1); in cx23885_gpio_setup() 1730 cx23885_gpio_set(dev, GPIO_0 | GPIO_1); in cx23885_gpio_setup()
|
D | cx23885-dvb.c | 614 cx23885_gpio_enable(dev, GPIO_0 | GPIO_1, 1); in dvbsky_t9580_set_voltage() 619 cx23885_gpio_clear(dev, GPIO_0); in dvbsky_t9580_set_voltage() 623 cx23885_gpio_set(dev, GPIO_0); in dvbsky_t9580_set_voltage() 627 cx23885_gpio_clear(dev, GPIO_0); in dvbsky_t9580_set_voltage() 757 cx23885_gpio_set(dev, GPIO_0); in cx23885_dvb_set_frontend()
|
D | cx23885.h | 106 #define GPIO_0 0x00000001 macro
|
/linux-6.6.21/arch/mips/boot/dts/mscc/ |
D | serval.dtsi | 105 pins = "GPIO_0", "GPIO_2", "GPIO_3", "GPIO_1";
|
/linux-6.6.21/Documentation/devicetree/bindings/gpio/ |
D | gpio-xgene-sb.txt | 8 | GPIO controller +------ GPIO_0
|
/linux-6.6.21/arch/arm64/boot/dts/qcom/ |
D | msm8998-sony-xperia-yoshino-maple.dts | 75 gpio-line-names = "", /* GPIO_0 */
|
D | sm8250-sony-xperia-edo-pdx206.dts | 94 gpio-line-names = "AP_CTI_IN", /* GPIO_0 */
|
D | sm8450-sony-xperia-nagara-pdx224.dts | 50 gpio-line-names = "TELE_SPI_MISO", /* GPIO_0 */
|
D | sm8450-sony-xperia-nagara-pdx223.dts | 78 gpio-line-names = "NC", /* GPIO_0 */
|
D | sm8350-sony-xperia-sagami-pdx215.dts | 103 gpio-line-names = "APPS_I2C_0_SDA", /* GPIO_0 */
|
D | sm8250-sony-xperia-edo-pdx203.dts | 186 gpio-line-names = "AP_CTI_IN", /* GPIO_0 */
|
D | apq8039-t2.dts | 199 "APQ_UART1_TX", /* GPIO_0 */
|
D | msm8996pro-xiaomi-natrium.dts | 251 "ESE_SPI_MOSI", /* GPIO_0 */
|
D | msm8996-xiaomi-gemini.dts | 296 "ESE_SPI_MOSI", /* GPIO_0 */
|
D | msm8996pro-xiaomi-scorpio.dts | 321 "ESE_SPI_MOSI", /* GPIO_0 */
|
D | sm8350-hdk.dts | 492 "APPS_I2C_SDA", /* GPIO_0 */
|
/linux-6.6.21/Documentation/devicetree/bindings/mfd/ |
D | mscc,ocelot.yaml | 128 pins = "GPIO_0", "GPIO_1", "GPIO_2", "GPIO_3";
|
/linux-6.6.21/arch/arm64/boot/dts/marvell/ |
D | armada-7040-db.dts | 136 * IO0_4: GPIO_0 IO1_4: SD_Status
|
/linux-6.6.21/include/linux/mfd/ |
D | idt8a340_reg.h | 265 #define GPIO_0 0xc8c2 macro
|
/linux-6.6.21/arch/arm64/boot/dts/freescale/ |
D | imx8mn-bsh-smm-s2-common.dtsi | 420 MX8MN_IOMUXC_GPIO1_IO00_GPIO1_IO0 0x0d6 /* GPIO_0 - WIFI_GPIO_0 */
|
/linux-6.6.21/arch/arm64/boot/dts/actions/ |
D | s900-bubblegum-96.dts | 94 "GPIO-A", /* GPIO_0, LSEC pin 23 */
|
/linux-6.6.21/Documentation/devicetree/bindings/pinctrl/ |
D | mediatek,mt7622-pinctrl.yaml | 286 PWM_0, GPIO_0, GPIO_1, GPIO_2, GPIO_3, GPIO_4, GPIO_5,
|
D | mediatek,mt7986-pinctrl.yaml | 273 enum: [SYS_WATCHDOG, WF2G_LED, WF5G_LED, I2C_SCL, I2C_SDA, GPIO_0,
|
/linux-6.6.21/arch/arm64/boot/dts/microchip/ |
D | sparx5.dtsi | 240 pins = "GPIO_0", "GPIO_1", "GPIO_2", "GPIO_3";
|