/linux-6.1.9/arch/arm/boot/dts/ |
D | sama5d3_gmac.dtsi | 3 * sama5d3_gmac.dtsi - Device Tree Include file for SAMA5D3 SoC with 19 <AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB0 periph A GTX0, conflicts with PWMH0 */ 20 AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB1 periph A GTX1, conflicts with PWML0 */ 21 AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB2 periph A GTX2, conflicts with TK1 */ 22 AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB3 periph A GTX3, conflicts with TF1 */ 23 AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB4 periph A GRX0, conflicts with PWMH1 */ 24 AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB5 periph A GRX1, conflicts with PWML1 */ 25 AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB6 periph A GRX2, conflicts with TD1 */ 26 AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB7 periph A GRX3, conflicts with RK1 */ 30 … <AT91_PIOB 19 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB19 periph B GTX4, conflicts with MCI1_CDA */ [all …]
|
D | at91sam9x5_isi.dtsi | 3 * at91sam9x5_isi.dtsi - Device Tree Include file for AT91SAM9x5 SoC with an 19 <AT91_PIOC 0 AT91_PERIPH_B AT91_PINCTRL_NONE /* ISI_D0, conflicts with LCDDAT0 */ 20 AT91_PIOC 1 AT91_PERIPH_B AT91_PINCTRL_NONE /* ISI_D1, conflicts with LCDDAT1 */ 21 AT91_PIOC 2 AT91_PERIPH_B AT91_PINCTRL_NONE /* ISI_D2, conflicts with LCDDAT2 */ 22 AT91_PIOC 3 AT91_PERIPH_B AT91_PINCTRL_NONE /* ISI_D3, conflicts with LCDDAT3 */ 23 AT91_PIOC 4 AT91_PERIPH_B AT91_PINCTRL_NONE /* ISI_D4, conflicts with LCDDAT4 */ 24 AT91_PIOC 5 AT91_PERIPH_B AT91_PINCTRL_NONE /* ISI_D5, conflicts with LCDDAT5 */ 25 AT91_PIOC 6 AT91_PERIPH_B AT91_PINCTRL_NONE /* ISI_D6, conflicts with LCDDAT6 */ 26 AT91_PIOC 7 AT91_PERIPH_B AT91_PINCTRL_NONE /* ISI_D7, conflicts with LCDDAT7 */ 27 AT91_PIOC 12 AT91_PERIPH_B AT91_PINCTRL_NONE /* ISI_PCK, conflicts with LCDDAT12 */ [all …]
|
D | sama5d3.dtsi | 555 <AT91_PIOD 30 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD30 periph A AD10, conflicts with PCK0 */ 559 <AT91_PIOD 31 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD31 periph A AD11, conflicts with PCK1 */ 634 …<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA30 periph A TWD0 pin, conflicts with URXD1, ISI… 635 …AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA31 periph A TWCK0 pin, conflicts with UTXD1, I… 648 …<AT91_PIOC 26 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC26 periph B TWD1 pin, conflicts with SPI1_NPCS1… 649 …AT91_PIOC 27 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC27 periph B TWCK1 pin, conflicts with SPI1_NPC… 662 <AT91_PIOA 18 AT91_PERIPH_B AT91_PINCTRL_NONE /* TWD2 pin, conflicts with LCDDAT18, ISI_D2 */ 663 … AT91_PIOA 19 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* TWCK2 pin, conflicts with LCDDAT19, ISI_D3 */ 676 … <AT91_PIOA 16 AT91_PERIPH_C AT91_PINCTRL_NONE /* PA16 periph C ISI_D0, conflicts with LCDDAT16 */ 677 … AT91_PIOA 17 AT91_PERIPH_C AT91_PINCTRL_NONE /* PA17 periph C ISI_D1, conflicts with LCDDAT17 */ [all …]
|
D | sama5d3_mci2.dtsi | 3 * sama5d3_mci2.dtsi - Device Tree Include file for SAMA5D3 SoC with 20 … <AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC15 periph A MCI2_CK, conflicts with PCK2 */ 21 AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PC10 periph A MCI2_CDA with pullup */ 22 AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PC11 periph A MCI2_DA0 with pullup */ 26 …2 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PC12 periph A MCI2_DA1 with pullup, conflicts with TIOA1 */ 27 …3 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PC13 periph A MCI2_DA2 with pullup, conflicts with TIOB1 */ 28 …AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PC14 periph A MCI2_DA3 with pullup, conflicts with TCLK1 */
|
D | sama5d3_emac.dtsi | 3 * sama5d3_emac.dtsi - Device Tree Include file for SAMA5D3 SoC with 19 <AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC0 periph A ETX0, conflicts with TIOA3 */ 20 AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC1 periph A ETX1, conflicts with TIOB3 */ 21 AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC2 periph A ERX0, conflicts with TCLK3 */ 22 AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC3 periph A ERX1, conflicts with TIOA4 */ 23 AT91_PIOC 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC4 periph A ETXEN, conflicts with TIOB4 */ 24 AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC5 periph A ECRSDV,conflicts with TCLK4 */ 25 AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC6 periph A ERXER, conflicts with TIOA5 */ 26 AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC7 periph A EREFCK, conflicts with TIOB5 */ 27 AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC8 periph A EMDC, conflicts with TCLK5 */
|
/linux-6.1.9/Documentation/devicetree/bindings/mips/ |
D | ralink.yaml | 13 Boards with a Ralink SoC shall have the following properties. 20 - description: Boards with Ralink RT2880 SoC 26 - description: Boards with Ralink RT3050 SoC 30 - description: Boards with Ralink RT3052 SoC 36 - description: Boards with Ralink RT3350 SoC 40 - description: Boards with Ralink RT3352 SoC 44 - description: Boards with Ralink RT3383 SoC 50 - description: Boards with Ralink RT5350 SoC 54 - description: Boards with Mediatek/Ralink MT7620A SoC 60 - description: Boards with Mediatek/Ralink MT7620N SoC [all …]
|
/linux-6.1.9/sound/soc/mediatek/ |
D | Kconfig | 12 that can be used with other codecs. 17 tristate "ASoc Audio driver for MT2701 with CS42448 codec" 23 with the CS42448 codecs. 28 tristate "ASoc Audio driver for MT2701 with WM8960 codec" 33 with the WM8960 codecs. 43 that can be used with other codecs. 48 tristate "ASoc Audio driver for MT6797 with MT6351 codec" 53 with the MT6351 codecs. 63 that can be used with other codecs. 68 tristate "ASoC Audio driver for MT8173 with MAX98090 codec" [all …]
|
/linux-6.1.9/sound/soc/intel/boards/ |
D | Kconfig | 7 has an audio controller with a DSP and I2S or DMIC port, then 22 confusing users with information they don't need. 44 tristate "Haswell with RT5640 I2S codec" 60 tristate "Broadwell with RT5650 codec" 66 This adds the ASoC machine driver for Intel Broadwell platforms with 72 tristate "Broadwell with RT5677 codec" 82 This adds support for Intel Broadwell platform based boards with 88 tristate "Broadwell with RT286 I2S codec" 103 tristate "Baytrail and Baytrail-CR with RT5640 codec" 111 platforms with RT5640 audio codec. [all …]
|
/linux-6.1.9/Documentation/ABI/testing/ |
D | sysfs-bus-iio-adc-mt6360 | 6 Calculating with scale and offset returns voltage in uV 12 Indicated MT6360 VBUS ADC with lower accuracy(+-75mA) 14 Calculating with scale and offset returns voltage in uV 20 Indicated MT6360 VBUS ADC with higher accuracy(+-30mA) 22 Calculating with scale and offset returns voltage in uV 29 Calculating with scale and offset returns voltage in uV 36 Calculating with scale and offset returns voltage in uV 43 Calculating with scale and offset returns voltage in uA 50 Calculating with scale and offset returns voltage in uA 57 Calculating with scale and offset returns voltage in uV [all …]
|
D | sysfs-fs-ubifs | 6 Exposes magic errors: every node starts with a magic number. 9 with a corrupted magic number. 11 The counter is reset to 0 with a remount. 21 with a corrupted node type. 23 The counter is reset to 0 with a remount. 33 with a bad crc checksum. 35 The counter is reset to 0 with a remount.
|
/linux-6.1.9/Documentation/devicetree/bindings/arm/ |
D | amlogic.yaml | 28 - description: Boards with the Amlogic Meson6 SoC 34 - description: Boards with the Amlogic Meson8 SoC 40 - description: Boards with the Amlogic Meson8m2 SoC 46 - description: Boards with the Amlogic Meson8b SoC 54 - description: Boards with the Amlogic Meson GXBaby SoC 76 - description: Boards with the Amlogic Meson GXL S805X SoC 84 - description: Boards with the Amlogic Meson GXL S905W SoC 93 - description: Boards with the Amlogic Meson GXL S905X SoC 105 - description: Boards with the Amlogic Meson GXL S905D SoC 118 - description: Boards with the Amlogic Meson GXM S912 SoC [all …]
|
/linux-6.1.9/arch/x86/crypto/ |
D | Kconfig | 26 AEAD cipher: AES with GCM 27 Length-preserving ciphers: AES with ECB, CBC, CTS, CTR, XTR, XTS 40 Length-preserving ciphers: Blowfish with ECB and CBC modes 45 tristate "Ciphers: Camellia with modes: ECB, CBC" 51 Length-preserving ciphers: Camellia with ECB and CBC modes 56 tristate "Ciphers: Camellia with modes: ECB, CBC (AES-NI/AVX)" 63 Length-preserving ciphers: Camellia with ECB and CBC modes 70 tristate "Ciphers: Camellia with modes: ECB, CBC (AES-NI/AVX2)" 74 Length-preserving ciphers: Camellia with ECB and CBC modes 81 tristate "Ciphers: CAST5 with modes: ECB, CBC (AVX)" [all …]
|
/linux-6.1.9/Documentation/devicetree/bindings/ |
D | trivial-devices.yaml | 32 … # SMBus/I2C Digital Temperature Sensor in 6-Pin SOT with SMBus Alert and Over Temperature Pin 40 # Analog Devices ADP5585 Keypad Decoder and I/O Expansion with support for Row5 70 # Total-Elapsed-Time Recorder with Alarm 76 # CPU Supervisor with Nonvolatile Memory and Programmable I/O 96 # DA9053: flexible system level PMIC with multicore support 156 # Injoinic IP5108 2.0A Power Bank IC with I2C 158 # Injoinic IP5109 2.1A Power Bank IC with I2C 160 # Injoinic IP5207 1.2A Power Bank IC with I2C 162 # Injoinic IP5209 2.4A Power Bank IC with I2C 174 # 10 kOhm digital potentiometer with I2C interface [all …]
|
/linux-6.1.9/Documentation/userspace-api/media/drivers/ |
D | max2175.rst | 43 list below shows the supported modes with a brief description. 52 - This configures FM band with a sample rate of 0.512 million 53 samples/sec with a 10.24 MHz sck. 55 - This configures VHF band with a sample rate of 2.048 million 56 samples/sec with a 32.768 MHz sck. 60 - This configures FM band with a sample rate of 0.7441875 million 61 samples/sec with a 14.88375 MHz sck. 63 - This configures FM band with a sample rate of 0.372 million 64 samples/sec with a 7.441875 MHz sck.
|
/linux-6.1.9/tools/testing/selftests/rcutorture/doc/ |
D | TREE_RCU-kconfig.txt | 11 CONFIG_NO_HZ_FULL -- Do two, one with partial CPU enablement. 16 CONFIG_RCU_FANOUT -- Cover hierarchy, but overlap with others. 18 CONFIG_RCU_NOCB_CPU -- Do three, one with no rcu_nocbs CPUs, one with 19 rcu_nocbs=0, and one with all rcu_nocbs CPUs. 25 RCU-bh: Do one with PREEMPT and one with !PREEMPT. 26 RCU-sched: Do one with PREEMPT but not BOOST. 48 Redundant with CONFIG_PREEMPT, ignore.
|
/linux-6.1.9/sound/soc/intel/avs/boards/ |
D | Kconfig | 13 This adds support for AVS with DA7219 I2S codec configuration. 21 This adds support for AVS with Digital Mic array configuration. 29 This adds support for AVS with HDAudio codec configuration. 37 transfer over I2S interface with SSP loopback scenarios. 45 This adds support for AVS with MAX98357A I2S codec configuration. 55 This adds support for AVS with MAX98373 I2S codec configuration. 65 This adds support for ASoC machine driver with NAU8825 I2S audio codec. 66 It is meant to be used with AVS driver. 76 This adds support for ASoC machine driver with RT274 I2S audio codec. 86 This adds support for ASoC machine driver with RT286 I2S audio codec. [all …]
|
/linux-6.1.9/Documentation/driver-api/usb/ |
D | anchors.rst | 12 keeping track of URBs and provides methods to deal with 25 Once it has no more URBs associated with it, the anchor can be 26 freed with normal memory management operations. 28 Association and disassociation of URBs with anchors 35 all URBs associated with an anchor. 36 Furthermore, disassociation can be made with :c:func:`usb_unanchor_urb` 44 This function kills all URBs associated with an anchor. The URBs 52 This function unlinks all URBs associated with an anchor. The URBs 67 This function waits for all URBs associated with an anchor to finish 74 Returns true if no URBs are associated with an anchor. Locking [all …]
|
/linux-6.1.9/arch/arc/plat-axs10x/ |
D | Kconfig | 19 The AXS10x Platforms consist of a mainboard with peripherals, 27 bool "AXS101 with AXC001 CPU Card (ARC 770D/EM6/AS221)" 32 The AXS101 Platform consists of an AXS10x mainboard with 34 with this configuration. 37 bool "AXS103 with AXC003 CPU Card (ARC HS38x)" 42 The AXS103 Platform consists of an AXS10x mainboard with 44 with this configuration.
|
/linux-6.1.9/Documentation/devicetree/bindings/rtc/ |
D | trivial-rtc.yaml | 23 # AB-RTCMC-32.768kHz-B5ZE-S3: Real Time Clock/Calendar Module with I2C Interface 25 # AB-RTCMC-32.768kHz-EOZ9: Real Time Clock/Calendar Module with I2C Interface 27 # I2C, 32-Bit Binary Counter Watchdog RTC with Trickle Charger and Reset Input/Output 31 # Extremely Accurate I²C RTC with Integrated Crystal and SRAM 40 # I2C-BUS INTERFACE REAL TIME CLOCK MODULE with Battery Backed RAM 44 # Intersil ISL1208 Low Power RTC with Battery Backed SRAM 46 # Intersil ISL1218 Low Power RTC with Battery Backed SRAM 50 # Real Time Clock Module with I2C-Bus 52 # Real Time Clock Module with I2C-Bus
|
/linux-6.1.9/Documentation/hwmon/ |
D | mlxreg-fan.rst | 6 - QMB700, equipped with 40x200GbE InfiniBand ports; 7 - MSN3700, equipped with 32x200GbE or 16x400GbE Ethernet ports; 8 - MSN3410, equipped with 6x400GbE plus 48x50GbE Ethernet ports; 9 - MSN3800, equipped with 64x1000GbE Ethernet ports; 13 These are the Top of the Rack systems, equipped with Mellanox switch 14 board with Mellanox Quantum or Spectrume-2 devices. 36 This setup can be re-programmed with other registers. 48 Single instance is created with one PWM control, up to 12 tachometers and
|
/linux-6.1.9/Documentation/devicetree/bindings/sound/ |
D | tlv320aic31xx.txt | 8 "ti,tlv320aic310x" - Generic TLV320AIC31xx with mono speaker amp 9 "ti,tlv320aic311x" - Generic TLV320AIC31xx with stereo speaker amp 45 * SPL, devices with stereo speaker amp 46 * SPR, devices with stereo speaker amp 47 * SPK, devices with mono speaker amp 51 * MIC1LP, devices with ADC 52 * MIC1RP, devices with ADC 53 * MIC1LM, devices with ADC
|
/linux-6.1.9/Documentation/process/ |
D | submit-checklist.rst | 20 a) with applicable or modified ``CONFIG`` options ``=y``, ``=m``, and 39 Check for trivial violations with the patch style checker prior to 50 8) Has been carefully reviewed with respect to relevant ``Kconfig`` 51 combinations. This is very hard to get right with testing -- brainpower 54 9) Check cleanly with sparse. 69 12) Has been tested with ``CONFIG_PREEMPT``, ``CONFIG_DEBUG_PREEMPT``, 75 13) Has been build- and runtime tested with and without ``CONFIG_SMP`` and 78 14) All codepaths have been exercised with all lockdep features enabled. 85 17) All new module parameters are documented with ``MODULE_PARM_DESC()`` 92 19) Has been checked with injection of at least slab and page-allocation [all …]
|
/linux-6.1.9/Documentation/userspace-api/media/v4l/ |
D | pixfmt-compressed.rst | 63 - H264 parsed slice data, including slice headers, either with or 66 H264 pipeline with the :ref:`stateless_decoder`. 70 In addition, metadata associated with the frame to decode are 78 with this pixel format. The output buffer must contain the 95 - MPEG1 Picture. Each buffer starts with a Picture header, followed 96 by other headers as needed and ending with the Picture data. 104 - MPEG2 Picture. Each buffer starts with a Picture header, followed 105 by other headers as needed and ending with the Picture data. 115 MPEG-2 pipeline with the :ref:`stateless_decoder`. 116 Metadata associated with the frame to decode is required to be passed [all …]
|
/linux-6.1.9/Documentation/usb/ |
D | usb-serial.rst | 47 ConnectTech has been very forthcoming with information about their 48 device, including providing a unit to test with. 53 For any questions or problems with this driver, please contact 60 This driver works with all HandSpring USB, Palm USB, and Sony Clié USB 92 Devices that are not compiled into the kernel can be specified with module 98 For any questions or problems with this driver, please contact Greg 133 up with a "Connected to usbdial" window with status shown as connected. 137 with the module parameter "debug" set to 1 and examine the system log. 141 Wes Cilldhaire <billybobjoehenrybob@hotmail.com>, with the Toshiba E570, 144 is displayed), then put it in the cradle with the ipaq driver loaded, open [all …]
|
/linux-6.1.9/drivers/infiniband/sw/rxe/ |
D | Kconfig | 11 the Linux network stack. It enables a system with a 12 standard Ethernet adapter to interoperate with a RoCE 13 adapter or with another system running the RXE driver. 18 The driver is split into two layers, one interfaces with the 23 with the Linux network stack at layer 3. 25 To configure and work with soft-RoCE driver please use the
|