Lines Matching refs:with
47 ConnectTech has been very forthcoming with information about their
48 device, including providing a unit to test with.
53 For any questions or problems with this driver, please contact
60 This driver works with all HandSpring USB, Palm USB, and Sony Clié USB
92 Devices that are not compiled into the kernel can be specified with module
98 For any questions or problems with this driver, please contact Greg
133 up with a "Connected to usbdial" window with status shown as connected.
137 with the module parameter "debug" set to 1 and examine the system log.
141 Wes Cilldhaire <billybobjoehenrybob@hotmail.com>, with the Toshiba E570,
144 is displayed), then put it in the cradle with the ipaq driver loaded, open
150 For any questions or problems with the driver, please contact Ganesh
165 - basic input/output (tested with 'cu')
173 - device ID isn't right, might collide with other Keyspan products
182 For any questions or problems with this driver, please contact Brian
190 firmware and is being developed with their support.
195 have been pretty thoroughly tested at various baud rates with 8-N-1
207 For any questions or problems with this driver, please contact Hugh
221 For any questions or problems with this driver, please contact Bill Ryder.
249 Cypress Semiconductor claims no affiliation with the
253 work with the driver. As long as they stay true to the CY4601
260 of the termios settings, along with some custom termios so that the
272 documented online available with firmware 2.31, with some unknown
277 It will be fine with null modem links, as long as you do not try to link two
280 The driver is smp safe. Performance with the driver is rather low when using
299 This driver works under SMP with the usb-uhci driver. It does not
300 work under SMP with the uhci driver.
310 (alborchers@steinerpoint.com) for questions or problems with this
317 Single port DB-9/PS-2 serial adapter from Belkin with firmware by eTEK Labs.
318 The Peracom single port serial adapter also works with this driver, as
352 For any questions or problems with this driver, please contact William
367 For any questions or problems with this driver, please contact Gary
385 converter uses Product ID 0x230 and Vendor ID 0x711 and works with this
386 driver. Also, D-Link's DU-H3SP USB BAY also works with this driver.
388 For any questions or problems with this driver, please contact Wolfgang
415 For any questions or problems with this driver, please contact Greg
431 For any questions or problems with this driver, please contact
441 from Aten (the UC-232) and IO-Data work with this driver, as does
444 For any questions or problems with this driver, please contact Greg
476 For any questions or problems with this driver, please contact
493 - Devices with a single serial port based on the Moschip MCS7703 may work
494 with this driver with a simple addition to the usb_device_id table. I
500 If your device is not one of the above listed devices, compatible with
511 where the <vid> and <pid> is replaced with the hex representation of your
522 For any questions or problems with this driver, please contact Greg
529 If anyone has any problems using these drivers, with any of the above