/linux-6.1.9/arch/powerpc/platforms/85xx/ |
D | t1042rdb_diu.c | 59 setbits8(cpld_base + CPLD_DIUCSR, 0x01 << 8); in t1042rdb_set_monitor_port() 60 setbits8(cpld_base + CPLD_DIUCSR, 0x01 << 4); in t1042rdb_set_monitor_port() 61 setbits8(cpld_base + CPLD_DIUCSR, CPLD_DIUCSR_BACKLIGHT); in t1042rdb_set_monitor_port()
|
D | mpc85xx_mds.c | 188 setbits8(&bcsr_regs[8], BCSR_UCC1_GETH_EN); in mpc85xx_mds_reset_ucc_phys() 189 setbits8(&bcsr_regs[9], BCSR_UCC2_GETH_EN); in mpc85xx_mds_reset_ucc_phys() 201 setbits8(&bcsr_regs[8], BCSR8_UEM_MARVELL_RST); in mpc85xx_mds_reset_ucc_phys() 203 setbits8(&bcsr_regs[7], BCSR7_UCC12_GETHnRST); in mpc85xx_mds_reset_ucc_phys() 228 setbits8(&bcsr_regs[11], BCSR11_ENET_MICRST); in mpc85xx_mds_reset_ucc_phys()
|
D | p1023_rdb.c | 72 setbits8(&bcsr_regs[15], BCSR15_I2C_BUS0_SEG2); in mpc85xx_rdb_setup_arch()
|
D | p1022_ds.c | 310 setbits8(pixis + PX_CTL, PX_CTL_ALTACC); in p1022ds_set_monitor_port()
|
/linux-6.1.9/arch/powerpc/platforms/82xx/ |
D | ep8248e.c | 62 setbits8(&ep8248e_bcsr[8], BCSR8_MDIO_CLOCK); in ep8248e_set_mdc() 75 setbits8(&ep8248e_bcsr[8], BCSR8_MDIO_READ); in ep8248e_set_mdio_dir() 84 setbits8(&ep8248e_bcsr[8], BCSR8_MDIO_DATA); in ep8248e_set_mdio_data() 277 setbits8(&ep8248e_bcsr[7], BCSR7_SCC2_ENABLE); in ep8248e_setup_arch() 278 setbits8(&ep8248e_bcsr[8], BCSR8_PHY1_ENABLE | BCSR8_PHY1_POWER | in ep8248e_setup_arch()
|
/linux-6.1.9/arch/powerpc/platforms/83xx/ |
D | mpc836x_mds.c | 101 setbits8(&bcsr_regs[9], BCSR9_GETHRST); in mpc836x_mds_setup_arch() 177 setbits8(&bcsr[13], BCSR13_nUSBVCC); in mpc836x_usb_cfg() 180 setbits8(&bcsr[13], BCSR13_USBMODE); in mpc836x_usb_cfg()
|
D | mpc832x_mds.c | 82 setbits8(&bcsr_regs[8], BCSR8_FETH_RST); in mpc832x_sys_setup_arch()
|
/linux-6.1.9/arch/powerpc/platforms/52xx/ |
D | mpc52xx_common.c | 279 setbits8(&wkup_gpio->wkup_gpioe, reset); in mpc5200_psc_ac97_gpio_reset() 282 setbits8(&wkup_gpio->wkup_ddr, reset); in mpc5200_psc_ac97_gpio_reset() 293 setbits8(&wkup_gpio->wkup_dvo, reset); in mpc5200_psc_ac97_gpio_reset()
|
/linux-6.1.9/arch/powerpc/platforms/8xx/ |
D | ep88xc.c | 140 setbits8(&ep88xc_bcsr[7], BCSR7_SCC2_ENABLE); in ep88xc_setup_arch() 141 setbits8(&ep88xc_bcsr[8], BCSR8_PHY1_ENABLE | BCSR8_PHY1_POWER | in ep88xc_setup_arch()
|
/linux-6.1.9/drivers/net/can/mscan/ |
D | mscan.c | 68 setbits8(®s->canctl0, MSCAN_SLPRQ); in mscan_set_mode() 94 setbits8(®s->canctl0, MSCAN_INITRQ); in mscan_set_mode() 106 setbits8(®s->canctl0, MSCAN_CSWAI); in mscan_set_mode() 368 setbits8(®s->canctl0, in mscan_get_err_frame() 567 setbits8(®s->canctl1, MSCAN_LISTEN); in mscan_open()
|
/linux-6.1.9/arch/powerpc/platforms/44x/ |
D | canyonlands.c | 88 setbits8(&bcsr[7], BCSR_USB_EN); in ppc460ex_canyonlands_fixup()
|
/linux-6.1.9/arch/powerpc/sysdev/ |
D | fsl_gtm.c | 212 setbits8(tmr->gtcfr, GTCFR_STP(num)); in gtm_set_ref_timer16() 310 setbits8(tmr->gtcfr, GTCFR_STP(num)); in gtm_stop_timer16()
|
/linux-6.1.9/drivers/i2c/busses/ |
D | i2c-cpm.c | 341 setbits8(&i2c_reg->i2mod, I2MOD_EN); /* Enable */ in cpm_i2c_xfer() 343 setbits8(&i2c_reg->i2com, I2COM_START); in cpm_i2c_xfer()
|
/linux-6.1.9/drivers/usb/host/ |
D | fhci-hcd.c | 42 setbits8(&fhci->regs->usb_usmod, USB_MODE_SFTE); in fhci_start_sof_timer() 122 setbits8(&usb->fhci->regs->usb_usmod, USB_MODE_EN); in fhci_usb_enable()
|
D | fhci-sched.c | 471 setbits8(&usb->fhci->regs->usb_usmod, USB_MODE_LSS); in fhci_device_connected_interrupt()
|
/linux-6.1.9/drivers/tty/serial/cpm_uart/ |
D | cpm_uart_core.c | 166 setbits8(&smcp->smc_smcm, SMCM_TX); in cpm_uart_start_tx() 421 setbits8(&pinfo->smcp->smc_smcm, SMCM_RX); in cpm_uart_startup()
|
/linux-6.1.9/drivers/mtd/nand/raw/ |
D | fsl_elbc_nand.c | 512 setbits8(elbc_fcm_ctrl->addr, NAND_STATUS_WP); in fsl_elbc_cmdfunc()
|
/linux-6.1.9/arch/powerpc/include/asm/ |
D | io.h | 996 #define setbits8(_addr, _v) out_8((_addr), in_8(_addr) | (_v)) macro
|
/linux-6.1.9/drivers/usb/gadget/udc/ |
D | fsl_qe_udc.c | 693 setbits8(&udc->usb_regs->usb_usmod, USB_MODE_EN); in qe_usb_enable()
|