| /linux-6.1.9/Documentation/devicetree/bindings/mfd/ |
| D | samsung,s5m8767.yaml | 39 s5m8767,pmic-buck2-dvs-voltage:
44 A set of 8 voltage values in micro-volt (uV) units for buck2 when
70 s5m8767,pmic-buck2-uses-gpio-dvs:
72 description: buck2 can be controlled by gpio dvs.
102 description: Power supply for buck2
146 s5m8767,pmic-buck2-dvs-voltage: [ 's5m8767,pmic-buck-dvs-gpios' ]
149 …s5m8767,pmic-buck2-uses-gpio-dvs: [ 's5m8767,pmic-buck-dvs-gpios', 's5m8767,pmic-buck2-dvs-voltage…
158 - s5m8767,pmic-buck2-uses-gpio-dvs
169 s5m8767,pmic-buck2-uses-gpio-dvs: false
177 s5m8767,pmic-buck2-uses-gpio-dvs: false
[all …]
|
| D | ti,lp87524-q1.yaml | 44 - buck2
60 - buck2-in-supply
81 buck2-in-supply = <&vdd_5v0>;
99 buck2_reg: buck2 {
100 regulator-name = "buck2";
|
| D | max8998.txt | 29 - max8998,pmic-buck2-dvs-gpio: GPIO specifier for host gpio used
36 - max8998,pmic-buck2-default-dvs-idx: Default voltage setting selected from
47 Additional properties required if max8998,pmic-buck2-dvs-gpio is defined:
48 - max8998,pmic-buck2-dvs-voltage: An array of 2 voltage values in microvolts
49 for buck2 regulator that can be selected using dvs gpio.
98 max8998,pmic-buck2-default-dvs-idx = <0>;
99 max8998,pmic-buck2-dvs-gpio = <&gpx0 0 3 0 0>; /* SET3 */
100 max8998,pmic-buck2-dvs-voltage = <1350000>, <1300000>;
|
| D | da9052-i2c.txt | 20 buck2 : regulator BUCK PRO
51 buck2 {
|
| D | richtek,rt5120.yaml | 53 description: phandle for buck2 input power source
140 buck2 {
141 regulator-name = "rt5120-buck2";
|
| D | da9055.txt | 34 buck2 : regulator BUCK2
61 buck2: BUCK2 {
|
| D | rohm,bd71815-pmic.yaml | 128 buck2: buck2 {
129 regulator-name = "buck2";
|
| D | da9062.txt | 57 buck2 : BUCK_2
68 buck2 : BUCK_2
|
| /linux-6.1.9/arch/arm64/boot/dts/freescale/ |
| D | imx8mn-evk.dts | 18 cpu-supply = <&buck2>;
22 cpu-supply = <&buck2>;
26 cpu-supply = <&buck2>;
30 cpu-supply = <&buck2>;
52 buck2: BUCK2 { label
|
| D | imx8mp-icore-mx8mp.dtsi | 13 cpu-supply = <&buck2>;
17 cpu-supply = <&buck2>;
21 cpu-supply = <&buck2>;
25 cpu-supply = <&buck2>;
52 buck2: BUCK2 { label
|
| D | imx8mp-phycore-som.dtsi | 26 cpu-supply = <&buck2>;
30 cpu-supply = <&buck2>;
34 cpu-supply = <&buck2>;
38 cpu-supply = <&buck2>;
109 buck2: BUCK2 { label
|
| D | imx8mq-phanbell.dts | 52 cpu-supply = <&buck2>;
56 cpu-supply = <&buck2>;
60 cpu-supply = <&buck2>;
64 cpu-supply = <&buck2>;
144 buck2: BUCK2 { label
145 regulator-name = "buck2";
|
| D | imx8mm-venice-gw7903.dts | 189 cpu-supply = <&buck2>;
193 cpu-supply = <&buck2>;
197 cpu-supply = <&buck2>;
201 cpu-supply = <&buck2>;
428 buck2: BUCK2 { label
429 regulator-name = "buck2";
|
| D | imx8mn-venice-gw7902.dts | 171 cpu-supply = <&buck2>;
175 cpu-supply = <&buck2>;
179 cpu-supply = <&buck2>;
183 cpu-supply = <&buck2>;
444 buck2: BUCK2 { label
445 regulator-name = "buck2";
|
| D | imx8mm-venice-gw7904.dts | 248 cpu-supply = <&buck2>;
252 cpu-supply = <&buck2>;
256 cpu-supply = <&buck2>;
260 cpu-supply = <&buck2>;
472 buck2: BUCK2 { label
473 regulator-name = "buck2";
|
| D | imx8mm-venice-gw7902.dts | 180 cpu-supply = <&buck2>;
184 cpu-supply = <&buck2>;
188 cpu-supply = <&buck2>;
192 cpu-supply = <&buck2>;
445 buck2: BUCK2 { label
446 regulator-name = "buck2";
|
| /linux-6.1.9/Documentation/devicetree/bindings/regulator/ |
| D | maxim,max8997.yaml | 45 max8997,pmic-buck2-dvs-voltage:
50 A set of 8 voltage values in micro-volt (uV) units for buck2 when
74 max8997,pmic-buck2-uses-gpio-dvs:
77 buck2 can be controlled by GPIO DVS.
248 - max8997,pmic-buck2-dvs-voltage
255 max8997,pmic-buck2-uses-gpio-dvs: [ 'max8997,pmic-buck125-dvs-gpios' ]
265 - max8997,pmic-buck2-uses-gpio-dvs
273 max8997,pmic-buck2-dvs-voltage:
297 max8997,pmic-buck2-uses-gpio-dvs;
312 max8997,pmic-buck2-dvs-voltage = <1100000>, <1000000>,
[all …]
|
| D | richtek,rt5190a-regulator.yaml | 32 description: phandle to buck2 input voltage.
114 buck2 {
115 regulator-name = "rt5190a-buck2";
|
| D | richtek,rtq2134-regulator.yaml | 82 buck2 {
83 regulator-name = "rtq2134-buck2";
|
| D | mt6360-regulator.yaml | 55 BUCK2: buck2 {
57 regulator-name = "mt6360,buck2";
|
| D | 88pg86x.txt | 7 Optional subnodes for regulators: "buck1", "buck2", using common regulator
|
| D | ti,tps65219.yaml | 104 buck2-supply = <&vcc_3v3_sys>;
126 buck2_reg: buck2 {
|
| D | 88pm800.txt | 14 buck1, buck2, buck3, buck4, buck5, ldo1, ldo2, ldo3, ldo4, ldo5, ldo6, ldo7,
|
| /linux-6.1.9/arch/arm/boot/dts/ |
| D | s5pv210-aquila.dts | 83 max8998,pmic-buck2-default-dvs-idx = <0>;
84 max8998,pmic-buck2-dvs-gpio = <&gph0 5 GPIO_ACTIVE_HIGH>;
85 max8998,pmic-buck2-dvs-voltage = <1200000>, <1200000>;
|
| D | s5pv210-goni.dts | 95 max8998,pmic-buck2-default-dvs-idx = <0>;
96 max8998,pmic-buck2-dvs-gpio = <&gph0 5 GPIO_ACTIVE_HIGH>;
97 max8998,pmic-buck2-dvs-voltage = <1200000>, <1200000>;
|