| /linux-6.1.9/drivers/net/ |
| D | mii.c | 122 (bmcr & BMCR_SPEED100) == 0) ? in mii_ethtool_gset()
124 ((bmcr & BMCR_SPEED100) ? in mii_ethtool_gset()
206 (bmcr & BMCR_SPEED100) == 0) ? in mii_ethtool_get_link_ksettings()
208 ((bmcr & BMCR_SPEED100) ? in mii_ethtool_get_link_ksettings()
301 tmp = bmcr & ~(BMCR_ANENABLE | BMCR_SPEED100 | in mii_ethtool_sset()
306 tmp |= BMCR_SPEED100; in mii_ethtool_sset()
398 tmp = bmcr & ~(BMCR_ANENABLE | BMCR_SPEED100 | in mii_ethtool_set_link_ksettings()
403 tmp |= BMCR_SPEED100; in mii_ethtool_set_link_ksettings()
|
| D | sungem_phy.c | 351 ctl &= ~(BMCR_FULLDPLX|BMCR_SPEED100|BMCR_ANENABLE); in genmii_setup_forced()
361 ctl |= BMCR_SPEED100; in genmii_setup_forced()
520 ctl &= ~(BMCR_FULLDPLX|BMCR_SPEED100|BMCR_SPD2|BMCR_ANENABLE); in bcm54xx_setup_forced()
530 ctl |= BMCR_SPEED100; in bcm54xx_setup_forced()
803 ctl &= ~(BMCR_FULLDPLX|BMCR_SPEED100|BMCR_SPD2|BMCR_ANENABLE); in marvell_setup_forced()
811 ctl |= BMCR_SPEED100; in marvell_setup_forced()
|
| /linux-6.1.9/drivers/net/phy/ |
| D | xilinx_gmii2rgmii.c | 21 #define XILINX_GMII2RGMII_SPEED_MASK (BMCR_SPEED1000 | BMCR_SPEED100)
42 val |= BMCR_SPEED100; in xgmiitorgmii_configure()
|
| D | marvell-88x2222.c | 124 BMCR_SPEED1000 | BMCR_SPEED100, in mv2222_set_sgmii_speed()
135 BMCR_SPEED1000 | BMCR_SPEED100, in mv2222_set_sgmii_speed()
136 BMCR_SPEED100); in mv2222_set_sgmii_speed()
145 BMCR_SPEED1000 | BMCR_SPEED100, in mv2222_set_sgmii_speed()
|
| D | et1011c.c | 53 ctl &= ~(BMCR_FULLDPLX | BMCR_SPEED100 | BMCR_SPEED1000 | in et1011c_config_aneg()
|
| D | ax88796b.c | 66 if (val & BMCR_SPEED100) in asix_ax88772a_read_status()
|
| D | lxt.c | 290 val |= (BMCR_SPEED100 | BMCR_FULLDPLX); in lxt973_probe()
|
| D | bcm7xxx.c | 384 (BMCR_SPEED100 | BMCR_ANENABLE | BMCR_ANRESTART)); in bcm7xxx_28nm_ephy_eee_enable()
|
| D | micrel.c | 1389 BMCR_ANENABLE | BMCR_SPEED100, in ksz9x31_cable_test_start()
1824 return phy_modify(phydev, MII_BMCR, BMCR_ANENABLE | BMCR_SPEED100, in lan8814_cable_test_start()
1838 return phy_clear_bits(phydev, MII_BMCR, BMCR_ANENABLE | BMCR_SPEED100); in ksz886x_cable_test_start()
|
| /linux-6.1.9/drivers/net/ethernet/ibm/emac/ |
| D | phy.c | 123 ctl &= ~(BMCR_FULLDPLX | BMCR_SPEED100 | BMCR_SPEED1000 | BMCR_ANENABLE); in genmii_setup_aneg()
181 ctl &= ~(BMCR_FULLDPLX | BMCR_SPEED100 | BMCR_SPEED1000 | BMCR_ANENABLE); in genmii_setup_forced()
191 ctl |= BMCR_SPEED100; in genmii_setup_forced()
269 else if (bmcr & BMCR_SPEED100) in genmii_read_link()
|
| /linux-6.1.9/include/uapi/linux/ |
| D | mdio.h | 94 #define MDIO_CTRL1_SPEEDSELEXT (BMCR_SPEED1000 | BMCR_SPEED100)
102 #define MDIO_PMA_CTRL1_SPEED100 BMCR_SPEED100
|
| D | mii.h | 49 #define BMCR_SPEED100 0x2000 /* Select 100Mbps */ macro
|
| /linux-6.1.9/drivers/net/ethernet/chelsio/cxgb3/ |
| D | vsc8211.c | 158 else if (bmcr & BMCR_SPEED100) in vsc8211_get_link_status()
234 else if (bmcr & BMCR_SPEED100) in vsc8211_get_link_status_fiber()
|
| /linux-6.1.9/drivers/net/ethernet/chelsio/cxgb/ |
| D | mv88e1xxx.c | 131 ctl &= ~(BMCR_SPEED100 | BMCR_SPEED1000 | BMCR_ANENABLE); in mv88e1xxx_set_speed_duplex()
133 ctl |= BMCR_SPEED100; in mv88e1xxx_set_speed_duplex()
|
| /linux-6.1.9/drivers/net/ethernet/dec/tulip/ |
| D | media.c | 519 BMCR_PDOWN | BMCR_SPEED100 | BMCR_LOOPBACK | in tulip_find_mii()
525 new_bmcr |= BMCR_SPEED100; in tulip_find_mii()
|
| /linux-6.1.9/drivers/net/dsa/mv88e6xxx/ |
| D | serdes.c | 244 bmcr = val & ~(BMCR_SPEED100 | BMCR_FULLDPLX | BMCR_SPEED1000); in mv88e6352_serdes_pcs_link_up()
250 bmcr |= BMCR_SPEED100; in mv88e6352_serdes_pcs_link_up()
1060 bmcr = val & ~(BMCR_SPEED100 | BMCR_FULLDPLX | BMCR_SPEED1000); in mv88e6390_serdes_pcs_link_up()
1067 bmcr |= BMCR_SPEED100; in mv88e6390_serdes_pcs_link_up()
|
| /linux-6.1.9/drivers/net/ethernet/sun/ |
| D | sunbmac.c | 496 if (bp->sw_bmcr & BMCR_SPEED100) { in try_next_permutation()
518 bp->sw_bmcr &= ~(BMCR_SPEED100); in try_next_permutation()
540 (bp->sw_bmcr & BMCR_SPEED100) ? in bigmac_timer()
611 bp->sw_bmcr |= BMCR_SPEED100; in bigmac_begin_auto_negotiation()
|
| D | sunhme.c | 500 if (hp->sw_bmcr & BMCR_SPEED100) { in try_next_permutation()
501 hp->sw_bmcr &= ~(BMCR_SPEED100); in try_next_permutation()
528 hp->sw_bmcr & BMCR_SPEED100 ? 100 : 10, in display_forced_link_mode()
629 hp->sw_bmcr = BMCR_SPEED100; in happy_meal_timer()
1292 hp->sw_bmcr = BMCR_SPEED100; in happy_meal_begin_auto_negotiation()
1295 hp->sw_bmcr = BMCR_SPEED100; in happy_meal_begin_auto_negotiation()
1784 hp->sw_bmcr |= (BMCR_FULLDPLX | BMCR_SPEED100); in happy_meal_mif_interrupt()
1787 hp->sw_bmcr |= BMCR_SPEED100; in happy_meal_mif_interrupt()
2318 speed = (hp->sw_bmcr & BMCR_SPEED100) ? SPEED_100 : SPEED_10; in hme_get_link_ksettings()
|
| D | cassini.c | 215 BMCR_SPEED100, /* 2 : 100bt half duplex */
217 BMCR_SPEED100|BMCR_FULLDPLX, /* 4 : 100bt full duplex */
691 cp->link_cntl |= BMCR_SPEED100; in cas_begin_auto_negotiation()
752 ctl &= ~(BMCR_FULLDPLX | BMCR_SPEED100 | in cas_begin_auto_negotiation()
1563 CAS_BMCR_SPEED1000 : BMCR_SPEED100; in cas_mdio_link_not_up()
1576 val |= (BMCR_SPEED100 | BMCR_FULLDPLX); in cas_mdio_link_not_up()
1581 if (val & BMCR_SPEED100) { in cas_mdio_link_not_up()
1585 val &= ~BMCR_SPEED100; in cas_mdio_link_not_up()
3570 if (val & BMCR_SPEED100) in cas_set_link_modes()
4564 ((bmcr & BMCR_SPEED100) ? in cas_get_link_ksettings()
[all …]
|
| /linux-6.1.9/include/linux/ |
| D | mii.h | 568 bmcr = BMCR_SPEED100; in mii_bmcr_encode_fixed()
|
| /linux-6.1.9/drivers/net/ethernet/atheros/atl1c/ |
| D | atl1c_hw.c | 619 mii_bmcr_data |= BMCR_SPEED100 | BMCR_FULLDPLX; in atl1c_phy_init()
622 mii_bmcr_data |= BMCR_SPEED100; in atl1c_phy_init()
|
| /linux-6.1.9/drivers/net/ethernet/dlink/ |
| D | dl2k.c | 1547 switch (bmcr & (BMCR_SPEED100 | BMCR_SPEED1000)) { in mii_get_media()
1551 case BMCR_SPEED100: in mii_get_media()
1641 bmcr |= BMCR_SPEED100; in mii_set_media()
|
| /linux-6.1.9/drivers/net/dsa/ |
| D | lan9303-core.c | 1066 ctl |= BMCR_SPEED100; in lan9303_adjust_link()
1068 ctl &= ~BMCR_SPEED100; in lan9303_adjust_link()
|
| /linux-6.1.9/drivers/net/dsa/microchip/ |
| D | ksz8795.c | 584 data |= BMCR_SPEED100; in ksz8_r_phy()
761 if (val & BMCR_SPEED100) in ksz8_w_phy()
|
| /linux-6.1.9/drivers/net/ethernet/ |
| D | jme.c | 438 (bmcr & BMCR_SPEED100) == 0) ? in jme_check_link()
440 (bmcr & BMCR_SPEED100) ? in jme_check_link()
1863 tmp = bmcr & ~(BMCR_ANENABLE | BMCR_SPEED100 | in jme_set_100m_half()
1865 tmp |= BMCR_SPEED100; in jme_set_100m_half()
|