| /linux-6.1.9/drivers/net/ |
| D | mii.c | 126 ecmd->duplex = (bmcr & BMCR_FULLDPLX) ? DUPLEX_FULL : DUPLEX_HALF; in mii_ethtool_gset()
210 cmd->base.duplex = (bmcr & BMCR_FULLDPLX) ? in mii_ethtool_get_link_ksettings()
302 BMCR_SPEED1000 | BMCR_FULLDPLX); in mii_ethtool_sset()
308 tmp |= BMCR_FULLDPLX; in mii_ethtool_sset()
399 BMCR_SPEED1000 | BMCR_FULLDPLX); in mii_ethtool_set_link_ksettings()
405 tmp |= BMCR_FULLDPLX; in mii_ethtool_set_link_ksettings()
618 (val & BMCR_FULLDPLX)) in generic_mii_ioctl()
|
| D | sungem_phy.c | 351 ctl &= ~(BMCR_FULLDPLX|BMCR_SPEED100|BMCR_ANENABLE); in genmii_setup_forced()
368 ctl |= BMCR_FULLDPLX; in genmii_setup_forced()
520 ctl &= ~(BMCR_FULLDPLX|BMCR_SPEED100|BMCR_SPD2|BMCR_ANENABLE); in bcm54xx_setup_forced()
536 ctl |= BMCR_FULLDPLX; in bcm54xx_setup_forced()
803 ctl &= ~(BMCR_FULLDPLX|BMCR_SPEED100|BMCR_SPD2|BMCR_ANENABLE); in marvell_setup_forced()
820 ctl |= BMCR_FULLDPLX; in marvell_setup_forced()
|
| /linux-6.1.9/drivers/net/ethernet/ibm/emac/ |
| D | phy.c | 123 ctl &= ~(BMCR_FULLDPLX | BMCR_SPEED100 | BMCR_SPEED1000 | BMCR_ANENABLE); in genmii_setup_aneg()
181 ctl &= ~(BMCR_FULLDPLX | BMCR_SPEED100 | BMCR_SPEED1000 | BMCR_ANENABLE); in genmii_setup_forced()
200 ctl |= BMCR_FULLDPLX; in genmii_setup_forced()
263 if (bmcr & BMCR_FULLDPLX) in genmii_read_link()
|
| /linux-6.1.9/drivers/net/phy/ |
| D | et1011c.c | 53 ctl &= ~(BMCR_FULLDPLX | BMCR_SPEED100 | BMCR_SPEED1000 | in et1011c_config_aneg()
|
| D | ax88796b.c | 71 if (val & BMCR_FULLDPLX) in asix_ax88772a_read_status()
|
| D | lxt.c | 290 val |= (BMCR_SPEED100 | BMCR_FULLDPLX); in lxt973_probe()
|
| D | dp83869.c | 63 BMCR_FULLDPLX | \
|
| D | micrel.c | 1388 BMCR_SPEED1000 | BMCR_FULLDPLX | in ksz9x31_cable_test_start()
1390 BMCR_SPEED1000 | BMCR_FULLDPLX); in ksz9x31_cable_test_start()
1825 BMCR_SPEED1000 | BMCR_FULLDPLX); in lan8814_cable_test_start()
|
| /linux-6.1.9/include/uapi/linux/ |
| D | mii.h | 44 #define BMCR_FULLDPLX 0x0100 /* Full duplex */ macro
|
| D | mdio.h | 97 #define MDIO_CTRL1_FULLDPLX BMCR_FULLDPLX
|
| /linux-6.1.9/drivers/net/ethernet/chelsio/cxgb3/ |
| D | vsc8211.c | 155 dplx = (bmcr & BMCR_FULLDPLX) ? DUPLEX_FULL : DUPLEX_HALF; in vsc8211_get_link_status()
231 dplx = (bmcr & BMCR_FULLDPLX) ? DUPLEX_FULL : DUPLEX_HALF; in vsc8211_get_link_status_fiber()
|
| /linux-6.1.9/drivers/net/ethernet/chelsio/cxgb/ |
| D | mv88e1xxx.c | 138 ctl &= ~(BMCR_FULLDPLX | BMCR_ANENABLE); in mv88e1xxx_set_speed_duplex()
140 ctl |= BMCR_FULLDPLX; in mv88e1xxx_set_speed_duplex()
|
| /linux-6.1.9/drivers/net/pcs/ |
| D | pcs-altera-tse.c | 113 ctrl |= (BMCR_SPEED1000 | BMCR_FULLDPLX | BMCR_ANENABLE); in alt_tse_pcs_config()
|
| /linux-6.1.9/drivers/net/ethernet/dec/tulip/ |
| D | media.c | 518 new_bmcr &= ~(BMCR_CTST | BMCR_FULLDPLX | BMCR_ISOLATE | in tulip_find_mii()
523 new_bmcr |= BMCR_FULLDPLX; in tulip_find_mii()
|
| /linux-6.1.9/drivers/net/dsa/mv88e6xxx/ |
| D | serdes.c | 244 bmcr = val & ~(BMCR_SPEED100 | BMCR_FULLDPLX | BMCR_SPEED1000); in mv88e6352_serdes_pcs_link_up()
257 bmcr |= BMCR_FULLDPLX; in mv88e6352_serdes_pcs_link_up()
1060 bmcr = val & ~(BMCR_SPEED100 | BMCR_FULLDPLX | BMCR_SPEED1000); in mv88e6390_serdes_pcs_link_up()
1074 bmcr |= BMCR_FULLDPLX; in mv88e6390_serdes_pcs_link_up()
|
| /linux-6.1.9/drivers/net/ethernet/sun/ |
| D | cassini.c | 216 BMCR_FULLDPLX, /* 3 : 10bt full duplex */
217 BMCR_SPEED100|BMCR_FULLDPLX, /* 4 : 100bt full duplex */
218 CAS_BMCR_SPEED1000|BMCR_FULLDPLX /* 5 : 1000bt full duplex */
695 cp->link_cntl |= BMCR_FULLDPLX; in cas_begin_auto_negotiation()
741 if (cp->link_cntl & BMCR_FULLDPLX) in cas_begin_auto_negotiation()
752 ctl &= ~(BMCR_FULLDPLX | BMCR_SPEED100 | in cas_begin_auto_negotiation()
1561 val |= BMCR_FULLDPLX; in cas_mdio_link_not_up()
1576 val |= (BMCR_SPEED100 | BMCR_FULLDPLX); in cas_mdio_link_not_up()
1582 if (val & BMCR_FULLDPLX) /* fd failed */ in cas_mdio_link_not_up()
1583 val &= ~BMCR_FULLDPLX; in cas_mdio_link_not_up()
[all …]
|
| D | sunhme.c | 493 if (hp->sw_bmcr & BMCR_FULLDPLX) { in try_next_permutation()
494 hp->sw_bmcr &= ~(BMCR_FULLDPLX); in try_next_permutation()
529 hp->sw_bmcr & BMCR_FULLDPLX ? "Full" : "Half"); in display_forced_link_mode()
554 if (hp->sw_bmcr & BMCR_FULLDPLX) in set_happy_link_modes()
1299 hp->sw_bmcr |= BMCR_FULLDPLX; in happy_meal_begin_auto_negotiation()
1784 hp->sw_bmcr |= (BMCR_FULLDPLX | BMCR_SPEED100); in happy_meal_mif_interrupt()
1790 hp->sw_bmcr |= BMCR_FULLDPLX; in happy_meal_mif_interrupt()
2320 (hp->sw_bmcr & BMCR_FULLDPLX) ? in hme_get_link_ksettings()
|
| /linux-6.1.9/include/linux/ |
| D | mii.h | 578 bmcr |= BMCR_FULLDPLX; in mii_bmcr_encode_fixed()
|
| /linux-6.1.9/drivers/net/ethernet/atheros/atl1c/ |
| D | atl1c_hw.c | 619 mii_bmcr_data |= BMCR_SPEED100 | BMCR_FULLDPLX; in atl1c_phy_init()
625 mii_bmcr_data |= BMCR_FULLDPLX; in atl1c_phy_init()
|
| /linux-6.1.9/drivers/net/ethernet/freescale/fman/ |
| D | fman_dtsec.c | 1225 BMCR_FULLDPLX | BMCR_SPEED1000); in dtsec_restart_autoneg()
1351 BMCR_FULLDPLX | BMCR_SPEED1000); in dtsec_init()
1361 BMCR_FULLDPLX | BMCR_SPEED1000); in dtsec_init()
|
| /linux-6.1.9/drivers/net/ethernet/dlink/ |
| D | dl2k.c | 1557 if (bmcr & BMCR_FULLDPLX) { in mii_get_media()
1647 bmcr |= BMCR_FULLDPLX; in mii_set_media()
1702 if (bmcr & BMCR_FULLDPLX) { in mii_get_media_pcs()
1757 bmcr = BMCR_FULLDPLX; in mii_set_media_pcs()
|
| /linux-6.1.9/drivers/net/ethernet/smsc/ |
| D | smc911x.c | 755 bmcr |= BMCR_FULLDPLX; in smc911x_phy_fixed()
856 bmcr |= BMCR_FULLDPLX; in smc911x_phy_check_media()
860 bmcr &= ~BMCR_FULLDPLX; in smc911x_phy_check_media()
|
| /linux-6.1.9/drivers/net/dsa/ |
| D | lan9303-core.c | 1073 ctl |= BMCR_FULLDPLX; in lan9303_adjust_link()
1075 ctl &= ~BMCR_FULLDPLX; in lan9303_adjust_link()
|
| /linux-6.1.9/drivers/net/dsa/microchip/ |
| D | ksz8795.c | 597 data |= BMCR_FULLDPLX; in ksz8_r_phy()
765 if (val & BMCR_FULLDPLX) in ksz8_w_phy()
|
| /linux-6.1.9/drivers/net/ethernet/natsemi/ |
| D | natsemi.c | 760 np->duplex = (tmp & BMCR_FULLDPLX)? DUPLEX_FULL : DUPLEX_HALF; in natsemi_init_media()
1164 tmp &= ~(BMCR_ANENABLE | BMCR_SPEED100 | BMCR_FULLDPLX); in init_phy_fixup()
1168 tmp |= BMCR_FULLDPLX; in init_phy_fixup()
1684 } else if (mdio_read(dev, MII_BMCR) & BMCR_FULLDPLX) in check_link()
|