/linux-5.19.10/drivers/phy/broadcom/ |
D | phy-bcm-ns-usb2.c | 34 struct bcm_ns_usb2 *usb2 = phy_get_drvdata(phy); in bcm_ns_usb2_phy_init() local 35 struct device *dev = usb2->dev; in bcm_ns_usb2_phy_init() 39 err = clk_prepare_enable(usb2->ref_clk); in bcm_ns_usb2_phy_init() 45 ref_clk_rate = clk_get_rate(usb2->ref_clk); in bcm_ns_usb2_phy_init() 52 if (usb2->base) in bcm_ns_usb2_phy_init() 53 usb2ctl = readl(usb2->base); in bcm_ns_usb2_phy_init() 55 usb2ctl = readl(usb2->dmu + BCMA_DMU_CRU_USB2_CONTROL); in bcm_ns_usb2_phy_init() 69 if (usb2->clkset) in bcm_ns_usb2_phy_init() 70 regmap_write(usb2->clkset, 0, 0x0000ea68); in bcm_ns_usb2_phy_init() 72 writel(0x0000ea68, usb2->dmu + BCMA_DMU_CRU_CLKSET_KEY); in bcm_ns_usb2_phy_init() [all …]
|
/linux-5.19.10/Documentation/devicetree/bindings/phy/ |
D | renesas,usb2-phy.yaml | 4 $id: http://devicetree.org/schemas/phy/renesas,usb2-phy.yaml# 16 - const: renesas,usb2-phy-r8a77470 # RZ/G1C 20 - renesas,usb2-phy-r7s9210 # RZ/A2 21 - renesas,usb2-phy-r8a774a1 # RZ/G2M 22 - renesas,usb2-phy-r8a774b1 # RZ/G2N 23 - renesas,usb2-phy-r8a774c0 # RZ/G2E 24 - renesas,usb2-phy-r8a774e1 # RZ/G2H 25 - renesas,usb2-phy-r8a7795 # R-Car H3 26 - renesas,usb2-phy-r8a7796 # R-Car M3-W 27 - renesas,usb2-phy-r8a77961 # R-Car M3-W+ [all …]
|
D | nvidia,tegra124-xusb-padctl.txt | 83 For Tegra124 and Tegra132, the following pads exist: usb2, ulpi, hsic, pcie 86 For Tegra210, the following pads exist: usb2, hsic, pcie and sata. Below is 142 - usb2: usb2-0, usb2-1, usb2-2 154 - usb2: usb2-0, usb2-1, usb2-2, usb2-3 164 - usb2: usb2-0, usb2-1, usb2-2, usb2-3 230 - nvidia,usb2-companion: A single cell that specifies the physical port number 248 - 3x USB2: usb2-0, usb2-1, usb2-2 254 - 4x USB2: usb2-0, usb2-1, usb2-2, usb2-3 259 - 4x USB2: usb2-0, usb2-1, usb2-2, usb2-3 281 usb2 { [all …]
|
D | samsung,usb2-phy.yaml | 4 $id: http://devicetree.org/schemas/phy/samsung,usb2-phy.yaml# 30 - samsung,exynos3250-usb2-phy 31 - samsung,exynos4210-usb2-phy 32 - samsung,exynos4x12-usb2-phy 33 - samsung,exynos5250-usb2-phy 34 - samsung,exynos5420-usb2-phy 35 - samsung,s5pv210-usb2-phy 81 - samsung,exynos4x12-usb2-phy 82 - samsung,exynos5250-usb2-phy 83 - samsung,exynos5420-usb2-phy [all …]
|
D | ti,omap-usb2.yaml | 4 $id: http://devicetree.org/schemas/phy/ti,omap-usb2.yaml# 18 - ti,dra7x-usb2 19 - ti,dra7x-usb2-phy2 20 - ti,am654-usb2 22 - ti,omap-usb2 24 - const: ti,am437x-usb2 26 - const: ti,omap-usb2 74 compatible = "ti,am654-usb2", "ti,omap-usb2";
|
D | amlogic,meson8b-usb2-phy.yaml | 4 $id: "http://devicetree.org/schemas/phy/amlogic,meson8b-usb2-phy.yaml#" 17 - amlogic,meson8-usb2-phy 18 - amlogic,meson8b-usb2-phy 19 - amlogic,meson8m2-usb2-phy 20 - const: amlogic,meson-mx-usb2-phy 21 - const: amlogic,meson-gxbb-usb2-phy 57 compatible = "amlogic,meson-gxbb-usb2-phy";
|
D | phy-lantiq-rcu-usb2.txt | 12 "lantiq,ase-usb2-phy" 13 "lantiq,danube-usb2-phy" 14 "lantiq,xrx100-usb2-phy" 15 "lantiq,xrx200-usb2-phy" 16 "lantiq,xrx300-usb2-phy" 31 usb_phy0: usb2-phy@18 { 32 compatible = "lantiq,xrx200-usb2-phy";
|
D | phy-hisi-inno-usb2.txt | 5 "hisilicon,inno-usb2-phy", 6 "hisilicon,hi3798cv200-usb2-phy". 36 usb2_phy1: usb2-phy@120 { 37 compatible = "hisilicon,hi3798cv200-usb2-phy"; 57 usb2_phy2: usb2-phy@124 { 58 compatible = "hisilicon,hi3798cv200-usb2-phy";
|
D | socionext,uniphier-usb2-phy.yaml | 4 $id: http://devicetree.org/schemas/phy/socionext,uniphier-usb2-phy.yaml# 22 - socionext,uniphier-pro4-usb2-phy 23 - socionext,uniphier-ld11-usb2-phy 62 // The UniPhier usb2-phy should be a subnode of a "syscon" compatible node. 69 compatible = "socionext,uniphier-ld11-usb2-phy";
|
D | amlogic,meson-g12a-usb2-phy.yaml | 5 $id: "http://devicetree.org/schemas/phy/amlogic,meson-g12a-usb2-phy.yaml#" 16 - amlogic,meson-g12a-usb2-phy 17 - amlogic,meson-a1-usb2-phy 71 compatible = "amlogic,meson-g12a-usb2-phy";
|
/linux-5.19.10/drivers/phy/samsung/ |
D | Makefile | 9 obj-$(CONFIG_PHY_SAMSUNG_USB2) += phy-exynos-usb2.o 10 phy-exynos-usb2-y += phy-samsung-usb2.o 11 phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4210_USB2) += phy-exynos4210-usb2.o 12 phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4X12_USB2) += phy-exynos4x12-usb2.o 13 phy-exynos-usb2-$(CONFIG_PHY_EXYNOS5250_USB2) += phy-exynos5250-usb2.o 14 phy-exynos-usb2-$(CONFIG_PHY_S5PV210_USB2) += phy-s5pv210-usb2.o
|
/linux-5.19.10/Documentation/devicetree/bindings/usb/ |
D | nvidia,tegra124-xusb.txt | 80 - Tegra124: usb2-0, usb2-1, usb2-2, hsic-0, hsic-1, usb3-0, usb3-1 81 - Tegra132: usb2-0, usb2-1, usb2-2, hsic-0, hsic-1, usb3-0, usb3-1 82 - Tegra210: usb2-0, usb2-1, usb2-2, usb2-3, hsic-0, usb3-0, usb3-1, usb3-2, 84 - Tegra186: usb2-0, usb2-1, usb2-2, hsic-0, usb3-0, usb3-1, usb3-2 119 phys = <&{/padctl@0,7009f000/pads/usb2/lanes/usb2-1}>, /* mini-PCIe USB */ 120 <&{/padctl@0,7009f000/pads/usb2/lanes/usb2-2}>, /* USB A */ 122 phy-names = "usb2-1", "usb2-2", "usb3-0";
|
D | fsl-usb.txt | 9 - compatible : Should be "fsl-usb2-mph" for multi port host USB 10 controllers, or "fsl-usb2-dr" for dual role USB controllers 11 or "fsl,mpc5121-usb2-dr" for dual role USB controllers of MPC5121. 13 also be mentioned (for eg. fsl-usb2-dr-v2.2 for bsc9132). 19 fsl-usb2-mph compatible controllers. Either this property or 20 "port1" (or both) must be defined for "fsl-usb2-mph" compatible 23 fsl-usb2-mph compatible controllers. Either this property or 24 "port0" (or both) must be defined for "fsl-usb2-mph" compatible 26 - dr_mode : indicates the working mode for "fsl-usb2-dr" compatible 45 compatible = "fsl-usb2-mph"; [all …]
|
D | amlogic,meson-g12a-usb-ctrl.yaml | 112 - const: usb2-phy0 # USB2 PHY0 if USBHOST_A port is used 113 - const: usb2-phy1 # USB2 PHY1 if USBOTG_B port is used 131 - const: usb2-phy0 # USB2 PHY0 if USBHOST_A port is used 132 - const: usb2-phy1 # USB2 PHY1 if USBOTG_B port is used 151 - const: usb2-phy0 # USB2 PHY0 if USBHOST_A port is used 152 - const: usb2-phy1 # USB2 PHY1 if USBOTG_B port is used 153 - const: usb2-phy2 # USB2 PHY2 if USBOTG_C port is used 167 - const: usb2-phy1 # USB2 PHY1 if USBOTG_B port is used 186 - const: usb2-phy1 # USB2 PHY1 if USBOTG_B port is used 213 phy-names = "usb2-phy0", "usb2-phy1", "usb3-phy0";
|
D | xlnx,usb2.yaml | 4 $id: http://devicetree.org/schemas/usb/xlnx,usb2.yaml# 14 const: xlnx,usb2-device-4.00.a 42 axi-usb2-device@42e00000 { 43 compatible = "xlnx,usb2-device-4.00.a";
|
/linux-5.19.10/drivers/phy/tegra/ |
D | xusb.c | 286 padctl->usb2 = pad; in tegra_xusb_pad_create() 714 static int tegra_xusb_usb2_port_parse_dt(struct tegra_xusb_usb2_port *usb2) in tegra_xusb_usb2_port_parse_dt() argument 716 struct tegra_xusb_port *port = &usb2->base; in tegra_xusb_usb2_port_parse_dt() 721 usb2->internal = of_property_read_bool(np, "nvidia,internal"); in tegra_xusb_usb2_port_parse_dt() 728 usb2->mode = USB_DR_MODE_UNKNOWN; in tegra_xusb_usb2_port_parse_dt() 730 usb2->mode = err; in tegra_xusb_usb2_port_parse_dt() 733 usb2->mode = USB_DR_MODE_HOST; in tegra_xusb_usb2_port_parse_dt() 737 if (usb2->mode == USB_DR_MODE_PERIPHERAL || in tegra_xusb_usb2_port_parse_dt() 738 usb2->mode == USB_DR_MODE_OTG) { in tegra_xusb_usb2_port_parse_dt() 745 modes[usb2->mode]); in tegra_xusb_usb2_port_parse_dt() [all …]
|
D | xusb-tegra186.c | 286 struct tegra_xusb_usb2_lane *usb2; in tegra186_usb2_lane_probe() local 289 usb2 = kzalloc(sizeof(*usb2), GFP_KERNEL); in tegra186_usb2_lane_probe() 290 if (!usb2) in tegra186_usb2_lane_probe() 293 INIT_LIST_HEAD(&usb2->base.list); in tegra186_usb2_lane_probe() 294 usb2->base.soc = &pad->soc->lanes[index]; in tegra186_usb2_lane_probe() 295 usb2->base.index = index; in tegra186_usb2_lane_probe() 296 usb2->base.pad = pad; in tegra186_usb2_lane_probe() 297 usb2->base.np = np; in tegra186_usb2_lane_probe() 299 err = tegra_xusb_lane_parse_dt(&usb2->base, np); in tegra186_usb2_lane_probe() 301 kfree(usb2); in tegra186_usb2_lane_probe() [all …]
|
D | xusb-tegra124.c | 421 TEGRA124_LANE("usb2-0", 0x004, 0, 0x3, usb2), 422 TEGRA124_LANE("usb2-1", 0x004, 2, 0x3, usb2), 423 TEGRA124_LANE("usb2-2", 0x004, 4, 0x3, usb2), 430 struct tegra_xusb_usb2_lane *usb2; in tegra124_usb2_lane_probe() local 433 usb2 = kzalloc(sizeof(*usb2), GFP_KERNEL); in tegra124_usb2_lane_probe() 434 if (!usb2) in tegra124_usb2_lane_probe() 437 INIT_LIST_HEAD(&usb2->base.list); in tegra124_usb2_lane_probe() 438 usb2->base.soc = &pad->soc->lanes[index]; in tegra124_usb2_lane_probe() 439 usb2->base.index = index; in tegra124_usb2_lane_probe() 440 usb2->base.pad = pad; in tegra124_usb2_lane_probe() [all …]
|
/linux-5.19.10/Documentation/devicetree/bindings/clock/ |
D | renesas,rcar-usb2-clock-sel.yaml | 4 $id: "http://devicetree.org/schemas/clock/renesas,rcar-usb2-clock-sel.yaml#" 38 - renesas,r8a774a1-rcar-usb2-clock-sel # RZ/G2M 39 - renesas,r8a774b1-rcar-usb2-clock-sel # RZ/G2N 40 - renesas,r8a774e1-rcar-usb2-clock-sel # RZ/G2H 41 - renesas,r8a7795-rcar-usb2-clock-sel # R-Car H3 42 - renesas,r8a7796-rcar-usb2-clock-sel # R-Car M3-W 43 - renesas,r8a77961-rcar-usb2-clock-sel # R-Car M3-W+ 44 - const: renesas,rcar-gen3-usb2-clock-sel 93 compatible = "renesas,r8a7795-rcar-usb2-clock-sel", 94 "renesas,rcar-gen3-usb2-clock-sel";
|
/linux-5.19.10/arch/arm/boot/dts/ |
D | bcm47081-tplink-archer-c5-v2.dts | 36 usb2-port1 { 37 label = "bcm53xx:green:usb2-port1"; 69 usb2-port2 { 70 label = "bcm53xx:green:usb2-port2"; 126 &usb2 {
|
D | tegra124-nyan.dtsi | 403 phys = <&{/padctl@7009f000/pads/usb2/lanes/usb2-0}>, /* 1st USB A */ 404 <&{/padctl@7009f000/pads/usb2/lanes/usb2-1}>, /* Internal USB */ 405 <&{/padctl@7009f000/pads/usb2/lanes/usb2-2}>, /* 2nd USB A */ 408 phy-names = "usb2-0", "usb2-1", "usb2-2", "usb3-0", "usb3-1"; 431 usb2 { 435 usb2-0 { 440 usb2-1 { 445 usb2-2 { 470 usb2-0 { 477 usb2-1 { [all …]
|
/linux-5.19.10/drivers/phy/amlogic/ |
D | Makefile | 3 obj-$(CONFIG_PHY_MESON8B_USB2) += phy-meson8b-usb2.o 4 obj-$(CONFIG_PHY_MESON_GXL_USB2) += phy-meson-gxl-usb2.o 5 obj-$(CONFIG_PHY_MESON_G12A_USB2) += phy-meson-g12a-usb2.o
|
/linux-5.19.10/drivers/media/usb/dvb-usb/ |
D | Makefile | 32 dvb-usb-nova-t-usb2-objs := nova-t-usb2.o 33 obj-$(CONFIG_DVB_USB_NOVA_T_USB2) += dvb-usb-nova-t-usb2.o 80 dvb-usb-technisat-usb2-objs := technisat-usb2.o 81 obj-$(CONFIG_DVB_USB_TECHNISAT_USB2) += dvb-usb-technisat-usb2.o
|
/linux-5.19.10/Documentation/devicetree/bindings/mips/lantiq/ |
D | rcu.txt | 43 usb_phy0: usb2-phy@18 { 44 compatible = "lantiq,xrx200-usb2-phy"; 52 usb_phy1: usb2-phy@34 { 53 compatible = "lantiq,xrx200-usb2-phy";
|
/linux-5.19.10/arch/arm64/boot/dts/nvidia/ |
D | tegra186-p3509-0000+p3636-0001.dts | 140 usb2 { 144 micro_b: usb2-0 { 149 usb2-1 { 154 usb2-2 { 174 usb2-0 { 192 usb2-1 { 199 usb2-2 { 207 nvidia,usb2-companion = <1>; 217 phys = <&{/padctl@3520000/pads/usb2/lanes/usb2-0}>, 218 <&{/padctl@3520000/pads/usb2/lanes/usb2-1}>, [all …]
|