/linux-5.19.10/arch/arm/mach-pxa/ |
D | hx4700.c | 879 { GPIO59_HX4700_LCD_PC1, GPIOF_OUT_INIT_HIGH, "LCD_PC1" }, 880 { GPIO62_HX4700_LCD_nRESET, GPIOF_OUT_INIT_HIGH, "LCD_RESET" }, 881 { GPIO70_HX4700_LCD_SLIN1, GPIOF_OUT_INIT_HIGH, "LCD_SLIN1" }, 882 { GPIO84_HX4700_LCD_SQN, GPIOF_OUT_INIT_HIGH, "LCD_SQN" }, 883 { GPIO110_HX4700_LCD_LVDD_3V3_ON, GPIOF_OUT_INIT_HIGH, "LCD_LVDD" }, 884 { GPIO111_HX4700_LCD_AVDD_3V3_ON, GPIOF_OUT_INIT_HIGH, "LCD_AVDD" }, 885 { GPIO32_HX4700_RS232_ON, GPIOF_OUT_INIT_HIGH, "RS232_ON" }, 886 { GPIO61_HX4700_W3220_nRESET, GPIOF_OUT_INIT_HIGH, "W3220_nRESET" }, 887 { GPIO71_HX4700_ASIC3_nRESET, GPIOF_OUT_INIT_HIGH, "ASIC3_nRESET" }, 888 { GPIO81_HX4700_CPU_GP_nRESET, GPIOF_OUT_INIT_HIGH, "CPU_GP_nRESET" }, [all …]
|
D | spitz_pm.c | 108 gpio_request_one(18, GPIOF_OUT_INIT_HIGH, "Unknown"); in spitz_presuspend()
|
D | cm-x300.c | 792 { 71, GPIOF_OUT_INIT_HIGH, "wlan en" }, 793 { 70, GPIOF_OUT_INIT_HIGH, "bt reset" },
|
/linux-5.19.10/arch/arm/mach-s3c/ |
D | mach-nexcoder.c | 116 gpio_request_one(S3C2410_GPE(14), GPIOF_OUT_INIT_HIGH, NULL); in nexcoder_sensorboard_init() 118 gpio_request_one(S3C2410_GPE(15), GPIOF_OUT_INIT_HIGH, NULL); in nexcoder_sensorboard_init() 122 gpio_request_one(S3C2410_GPF(1), GPIOF_OUT_INIT_HIGH, NULL); in nexcoder_sensorboard_init()
|
D | mach-osiris.c | 265 gpio_request_one(S3C2410_GPA(21), GPIOF_OUT_INIT_HIGH, NULL); in osiris_pm_suspend() 365 gpio_request_one(S3C2410_GPA(0), GPIOF_OUT_INIT_HIGH, NULL); in osiris_map_io()
|
D | pm-s3c2410.c | 67 gpio_request_one(S3C2410_GPF(2), GPIOF_OUT_INIT_HIGH, NULL); in s3c2410_pm_prepare()
|
D | mach-qt2410.c | 351 WARN_ON(gpio_request_one(S3C2410_GPB(0), GPIOF_OUT_INIT_HIGH, NULL)); in qt2410_machine_init()
|
D | mach-anubis.c | 390 gpio_request_one(S3C2410_GPA(0), GPIOF_OUT_INIT_HIGH, NULL); in anubis_map_io()
|
/linux-5.19.10/drivers/rtc/ |
D | rtc-v3020.c | 102 { 0, GPIOF_OUT_INIT_HIGH, "RTC CS"}, 103 { 0, GPIOF_OUT_INIT_HIGH, "RTC WR"}, 104 { 0, GPIOF_OUT_INIT_HIGH, "RTC RD"}, 105 { 0, GPIOF_OUT_INIT_HIGH, "RTC IO"},
|
/linux-5.19.10/arch/mips/bcm47xx/ |
D | workarounds.c | 12 err = gpio_request_one(usb_power, GPIOF_OUT_INIT_HIGH, "usb_power"); in bcm47xx_workarounds_enable_usb_power()
|
/linux-5.19.10/arch/arm/mach-omap2/ |
D | pdata-quirks.c | 107 res = gpio_request_one(gpio + 2, GPIOF_OUT_INIT_HIGH, in omap3_sbc_t3730_twl_callback() 191 { 56, GPIOF_OUT_INIT_HIGH, "wlan pwr" }, 192 { 4, GPIOF_OUT_INIT_HIGH, "xcvr noe" },
|
/linux-5.19.10/sound/soc/codecs/ |
D | wm1250-ev1.c | 170 wm1250->gpios[WM1250_EV1_GPIO_CLK_SEL0].flags = GPIOF_OUT_INIT_HIGH; in wm1250_ev1_pdata() 171 wm1250->gpios[WM1250_EV1_GPIO_CLK_SEL1].flags = GPIOF_OUT_INIT_HIGH; in wm1250_ev1_pdata()
|
D | pcm3008.c | 125 GPIOF_OUT_INIT_HIGH, "codec_dem0"); in pcm3008_codec_probe()
|
D | rt5682-i2c.c | 176 GPIOF_OUT_INIT_HIGH, "rt5682")) in rt5682_i2c_probe()
|
/linux-5.19.10/drivers/char/tpm/st33zp24/ |
D | i2c.c | 171 GPIOF_OUT_INIT_HIGH, "TPM IO LPCPD"); in st33zp24_i2c_of_request_resources() 200 pdata->io_lpcpd, GPIOF_OUT_INIT_HIGH, in st33zp24_i2c_request_resources()
|
D | spi.c | 289 GPIOF_OUT_INIT_HIGH, "TPM IO LPCPD"); in st33zp24_spi_of_request_resources() 318 pdata->io_lpcpd, GPIOF_OUT_INIT_HIGH, in st33zp24_spi_request_resources()
|
/linux-5.19.10/drivers/misc/eeprom/ |
D | digsy_mtc_eeprom.c | 92 ret = gpio_request_one(GPIO_EEPROM_OE, GPIOF_OUT_INIT_HIGH, in digsy_mtc_eeprom_devices_init()
|
/linux-5.19.10/include/linux/ |
D | gpio.h | 28 #define GPIOF_OUT_INIT_HIGH (GPIOF_DIR_OUT | GPIOF_INIT_HIGH) macro
|
/linux-5.19.10/Documentation/translations/zh_CN/ |
D | gpio.txt | 314 * GPIOF_OUT_INIT_HIGH - 配置为输出,并初始化为高电平 340 { 32, GPIOF_OUT_INIT_HIGH, "Power LED" }, /* 默认开启 */
|
/linux-5.19.10/Documentation/translations/zh_TW/ |
D | gpio.txt | 314 * GPIOF_OUT_INIT_HIGH - 配置爲輸出,並初始化爲高電平 340 { 32, GPIOF_OUT_INIT_HIGH, "Power LED" }, /* 默認開啓 */
|
/linux-5.19.10/drivers/nfc/s3fwrn5/ |
D | uart.c | 149 GPIOF_OUT_INIT_HIGH, "s3fwrn82_en"); in s3fwrn82_uart_probe()
|
D | i2c.c | 202 GPIOF_OUT_INIT_HIGH, "s3fwrn5_en"); in s3fwrn5_i2c_probe()
|
/linux-5.19.10/drivers/usb/host/ |
D | ehci-exynos.c | 145 err = devm_gpio_request_one(dev, gpio, GPIOF_OUT_INIT_HIGH, in exynos_setup_vbus_gpio()
|
/linux-5.19.10/drivers/video/fbdev/omap2/omapfb/displays/ |
D | panel-nec-nl8048hl11.c | 290 GPIOF_OUT_INIT_HIGH, "lcd QVGA"); in nec_8048_probe()
|
/linux-5.19.10/sound/soc/tegra/ |
D | tegra20_ac97.c | 349 GPIOF_OUT_INIT_HIGH, "codec-reset"); in tegra20_ac97_platform_probe()
|