Lines Matching refs:joystick

7 ability to enable both the builtin CDROM and joystick ports.
11 	This parameter is basically a flag.  A 0 will leave the joystick port 
12 disabled, while a non-zero value would enable the joystick port.  The default 
15 enable the joystick port you will have to add pss_enable_joystick=1 as an 
16 argument to the driver.  To actually use the joystick port you will then have 
17 to load the joystick driver itself.  Just remember to load the joystick driver 
24 these values would leave the port disabled.  Like the joystick port, the cdrom 
26 use of the newly enabled CDROM port.  Like the joystick port option above, 
44 value will only attept to configure the CDROM and joystick ports.  This 
45 parameter can be used by a user who only wished to use the builtin joystick 
50 his CDROM and/or joystick port(s) while gaining back the memory previously used 
80 /sbin/modprobe joystick
82 # System using the PSS sound card just for its CDROM and joystick ports.
88 /sbin/modprobe joystick