1// SPDX-License-Identifier: BSD-3-Clause
2/* Copyright (c) 2022, The Linux Foundation. All rights reserved. */
3
4#include <dt-bindings/iio/qcom,spmi-vadc.h>
5#include <dt-bindings/interrupt-controller/irq.h>
6#include <dt-bindings/input/linux-event-codes.h>
7#include <dt-bindings/spmi/spmi.h>
8
9/ {
10	thermal-zones {
11		pm8953-thermal {
12			polling-delay-passive = <0>;
13			polling-delay = <0>;
14
15			thermal-sensors = <&pm8953_temp>;
16
17			trips {
18				trip0 {
19					temperature = <105000>;
20					hysteresis = <0>;
21					type = "passive";
22				};
23
24				trip1 {
25					temperature = <125000>;
26					hysteresis = <0>;
27					type = "hot";
28				};
29
30				trip2 {
31					temperature = <145000>;
32					hysteresis = <0>;
33					type = "critical";
34				};
35			};
36		};
37	};
38};
39
40&spmi_bus {
41	pmic@0 {
42		compatible = "qcom,pm8953", "qcom,spmi-pmic";
43		reg = <0 SPMI_USID>;
44		#address-cells = <1>;
45		#size-cells = <0>;
46
47		pm8953_pon: pon@800 {
48			compatible = "qcom,pm8916-pon";
49			reg = <0x800>;
50			mode-bootloader = <0x2>;
51			mode-recovery = <0x1>;
52
53			pwrkey {
54				compatible = "qcom,pm8941-pwrkey";
55				interrupts = <0x00 0x08 0 IRQ_TYPE_EDGE_BOTH>;
56				debounce = <15625>;
57				bias-pull-up;
58				linux,code = <KEY_POWER>;
59			};
60
61			pm8953_resin: resin {
62				compatible = "qcom,pm8941-resin";
63				interrupts = <0x00 0x08 1 IRQ_TYPE_EDGE_BOTH>;
64				debounce = <15625>;
65				bias-pull-up;
66				status = "disabled";
67			};
68		};
69
70		pm8953_temp: temp-alarm@2400 {
71			compatible = "qcom,spmi-temp-alarm";
72			reg = <0x2400>;
73			interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>;
74			io-channels = <&pm8953_vadc VADC_DIE_TEMP>;
75			io-channel-names = "thermal";
76			#thermal-sensor-cells = <0>;
77		};
78
79		pm8953_vadc: adc@3100 {
80			compatible = "qcom,spmi-vadc";
81			reg = <0x3100>;
82			interrupts = <0x00 0x31 0x00 0x01>;
83			#address-cells = <1>;
84			#size-cells = <0>;
85			#io-channel-cells = <1>;
86
87			channel@8 {
88				reg = <VADC_DIE_TEMP>;
89			};
90			channel@9 {
91				reg = <VADC_REF_625MV>;
92			};
93			channel@a {
94				reg = <VADC_REF_1250MV>;
95			};
96			channel@c {
97				reg = <VADC_SPARE1>;
98			};
99			channel@e {
100				reg = <VADC_GND_REF>;
101			};
102			channel@f {
103				reg = <VADC_VDD_VADC>;
104			};
105		};
106
107		rtc@6000 {
108			compatible = "qcom,pm8941-rtc";
109			reg = <0x6000>, <0x6100>;
110			reg-names = "rtc", "alarm";
111			interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
112		};
113
114		pm8953_gpios: gpio@c000 {
115			compatible = "qcom,pm8953-gpio", "qcom,spmi-gpio";
116			reg = <0xc000>;
117			gpio-controller;
118			gpio-ranges = <&pm8953_gpios 0 0 8>;
119			#gpio-cells = <2>;
120			interrupt-controller;
121			#interrupt-cells = <2>;
122		};
123	};
124
125	pmic@1 {
126		compatible = "qcom,pm8953", "qcom,spmi-pmic";
127		reg = <1 SPMI_USID>;
128		#address-cells = <1>;
129		#size-cells = <0>;
130	};
131};
132