1// SPDX-License-Identifier: GPL-2.0-only
2
3/dts-v1/;
4
5#include "msm8916-samsung-a2015-common.dtsi"
6
7/ {
8	model = "Samsung Galaxy A3U (EUR)";
9	compatible = "samsung,a3u-eur", "qcom,msm8916";
10	chassis-type = "handset";
11
12	reg_panel_vdd3: regulator-panel-vdd3 {
13		compatible = "regulator-fixed";
14		regulator-name = "panel_vdd3";
15		regulator-min-microvolt = <1800000>;
16		regulator-max-microvolt = <1800000>;
17
18		gpio = <&tlmm 9 GPIO_ACTIVE_HIGH>;
19		enable-active-high;
20
21		pinctrl-names = "default";
22		pinctrl-0 = <&panel_vdd3_default>;
23	};
24
25	reg_touch_key: regulator-touch-key {
26		compatible = "regulator-fixed";
27		regulator-name = "touch_key";
28		regulator-min-microvolt = <2800000>;
29		regulator-max-microvolt = <2800000>;
30
31		gpio = <&tlmm 86 GPIO_ACTIVE_HIGH>;
32		enable-active-high;
33
34		pinctrl-names = "default";
35		pinctrl-0 = <&tkey_en_default>;
36	};
37
38	reg_key_led: regulator-key-led {
39		compatible = "regulator-fixed";
40		regulator-name = "key_led";
41		regulator-min-microvolt = <3300000>;
42		regulator-max-microvolt = <3300000>;
43
44		gpio = <&tlmm 60 GPIO_ACTIVE_HIGH>;
45		enable-active-high;
46
47		pinctrl-names = "default";
48		pinctrl-0 = <&tkey_led_en_default>;
49	};
50};
51
52&touchkey {
53	vcc-supply = <&reg_touch_key>;
54	vdd-supply = <&reg_key_led>;
55};
56
57&accelerometer {
58	mount-matrix = "0", "1", "0",
59		       "1", "0", "0",
60		       "0", "0", "1";
61};
62
63&blsp_i2c5 {
64	status = "okay";
65
66	touchscreen@20 {
67		compatible = "zinitix,bt541";
68
69		reg = <0x20>;
70		interrupt-parent = <&tlmm>;
71		interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
72
73		touchscreen-size-x = <540>;
74		touchscreen-size-y = <960>;
75
76		vcca-supply = <&reg_vdd_tsp_a>;
77		vdd-supply = <&pm8916_l6>;
78
79		pinctrl-names = "default";
80		pinctrl-0 = <&ts_int_default>;
81	};
82};
83
84&clk_pwm {
85	status = "okay";
86};
87
88&mdss_dsi0 {
89	panel@0 {
90		reg = <0>;
91
92		compatible = "samsung,s6e88a0-ams452ef01";
93
94		vdd3-supply = <&reg_panel_vdd3>;
95		vci-supply = <&pm8916_l17>;
96		reset-gpios = <&tlmm 25 GPIO_ACTIVE_HIGH>;
97
98		port {
99			panel_in: endpoint {
100				remote-endpoint = <&mdss_dsi0_out>;
101			};
102		};
103	};
104};
105
106&mdss_dsi0_out {
107	data-lanes = <0 1>;
108	remote-endpoint = <&panel_in>;
109};
110
111&vibrator {
112	status = "okay";
113};
114
115&wcnss {
116	status = "okay";
117};
118
119&wcnss_iris {
120	compatible = "qcom,wcn3620";
121};
122
123&tlmm {
124	panel_vdd3_default: panel-vdd3-default-state {
125		pins = "gpio9";
126		function = "gpio";
127
128		drive-strength = <2>;
129		bias-disable;
130	};
131
132	tkey_en_default: tkey-en-default-state {
133		pins = "gpio86";
134		function = "gpio";
135
136		drive-strength = <2>;
137		bias-disable;
138	};
139
140	tkey_led_en_default: tkey-led-en-default-state {
141		pins = "gpio60";
142		function = "gpio";
143
144		drive-strength = <2>;
145		bias-disable;
146	};
147};
148