1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 SCSI Tape Driver for Linux version 1.1 and newer. See the accompanying
4 file Documentation/scsi/st.rst for more information.
5
6 History:
7 Rewritten from Dwayne Forsyth's SCSI tape driver by Kai Makisara.
8 Contribution and ideas from several people including (in alphabetical
9 order) Klaus Ehrenfried, Eugene Exarevsky, Eric Lee Green, Wolfgang Denk,
10 Steve Hirsch, Andreas Koppenh"ofer, Michael Leodolter, Eyal Lebedinsky,
11 Michael Schaefer, J"org Weule, and Eric Youngdale.
12
13 Copyright 1992 - 2016 Kai Makisara
14 email Kai.Makisara@kolumbus.fi
15
16 Some small formal changes - aeb, 950809
17
18 Last modified: 18-JAN-1998 Richard Gooch <rgooch@atnf.csiro.au> Devfs support
19 */
20
21 static const char *verstr = "20160209";
22
23 #include <linux/module.h>
24
25 #include <linux/compat.h>
26 #include <linux/fs.h>
27 #include <linux/kernel.h>
28 #include <linux/sched/signal.h>
29 #include <linux/mm.h>
30 #include <linux/init.h>
31 #include <linux/string.h>
32 #include <linux/slab.h>
33 #include <linux/errno.h>
34 #include <linux/mtio.h>
35 #include <linux/major.h>
36 #include <linux/cdrom.h>
37 #include <linux/ioctl.h>
38 #include <linux/fcntl.h>
39 #include <linux/spinlock.h>
40 #include <linux/blkdev.h>
41 #include <linux/moduleparam.h>
42 #include <linux/cdev.h>
43 #include <linux/idr.h>
44 #include <linux/delay.h>
45 #include <linux/mutex.h>
46
47 #include <linux/uaccess.h>
48 #include <asm/dma.h>
49 #include <asm/unaligned.h>
50
51 #include <scsi/scsi.h>
52 #include <scsi/scsi_dbg.h>
53 #include <scsi/scsi_device.h>
54 #include <scsi/scsi_driver.h>
55 #include <scsi/scsi_eh.h>
56 #include <scsi/scsi_host.h>
57 #include <scsi/scsi_ioctl.h>
58 #include <scsi/sg.h>
59
60
61 /* The driver prints some debugging information on the console if DEBUG
62 is defined and non-zero. */
63 #define DEBUG 1
64 #define NO_DEBUG 0
65
66 #define ST_DEB_MSG KERN_NOTICE
67 #if DEBUG
68 /* The message level for the debug messages is currently set to KERN_NOTICE
69 so that people can easily see the messages. Later when the debugging messages
70 in the drivers are more widely classified, this may be changed to KERN_DEBUG. */
71 #define DEB(a) a
72 #define DEBC(a) if (debugging) { a ; }
73 #else
74 #define DEB(a)
75 #define DEBC(a)
76 #endif
77
78 #define ST_KILOBYTE 1024
79
80 #include "st_options.h"
81 #include "st.h"
82
83 static int buffer_kbs;
84 static int max_sg_segs;
85 static int try_direct_io = TRY_DIRECT_IO;
86 static int try_rdio = 1;
87 static int try_wdio = 1;
88 static int debug_flag;
89
90 static struct class st_sysfs_class;
91 static const struct attribute_group *st_dev_groups[];
92 static const struct attribute_group *st_drv_groups[];
93
94 MODULE_AUTHOR("Kai Makisara");
95 MODULE_DESCRIPTION("SCSI tape (st) driver");
96 MODULE_LICENSE("GPL");
97 MODULE_ALIAS_CHARDEV_MAJOR(SCSI_TAPE_MAJOR);
98 MODULE_ALIAS_SCSI_DEVICE(TYPE_TAPE);
99
100 /* Set 'perm' (4th argument) to 0 to disable module_param's definition
101 * of sysfs parameters (which module_param doesn't yet support).
102 * Sysfs parameters defined explicitly later.
103 */
104 module_param_named(buffer_kbs, buffer_kbs, int, 0);
105 MODULE_PARM_DESC(buffer_kbs, "Default driver buffer size for fixed block mode (KB; 32)");
106 module_param_named(max_sg_segs, max_sg_segs, int, 0);
107 MODULE_PARM_DESC(max_sg_segs, "Maximum number of scatter/gather segments to use (256)");
108 module_param_named(try_direct_io, try_direct_io, int, 0);
109 MODULE_PARM_DESC(try_direct_io, "Try direct I/O between user buffer and tape drive (1)");
110 module_param_named(debug_flag, debug_flag, int, 0);
111 MODULE_PARM_DESC(debug_flag, "Enable DEBUG, same as setting debugging=1");
112
113
114 /* Extra parameters for testing */
115 module_param_named(try_rdio, try_rdio, int, 0);
116 MODULE_PARM_DESC(try_rdio, "Try direct read i/o when possible");
117 module_param_named(try_wdio, try_wdio, int, 0);
118 MODULE_PARM_DESC(try_wdio, "Try direct write i/o when possible");
119
120 #ifndef MODULE
121 static int write_threshold_kbs; /* retained for compatibility */
122 static struct st_dev_parm {
123 char *name;
124 int *val;
125 } parms[] __initdata = {
126 {
127 "buffer_kbs", &buffer_kbs
128 },
129 { /* Retained for compatibility with 2.4 */
130 "write_threshold_kbs", &write_threshold_kbs
131 },
132 {
133 "max_sg_segs", NULL
134 },
135 {
136 "try_direct_io", &try_direct_io
137 },
138 {
139 "debug_flag", &debug_flag
140 }
141 };
142 #endif
143
144 /* Restrict the number of modes so that names for all are assigned */
145 #if ST_NBR_MODES > 16
146 #error "Maximum number of modes is 16"
147 #endif
148 /* Bit reversed order to get same names for same minors with all
149 mode counts */
150 static const char *st_formats[] = {
151 "", "r", "k", "s", "l", "t", "o", "u",
152 "m", "v", "p", "x", "a", "y", "q", "z"};
153
154 /* The default definitions have been moved to st_options.h */
155
156 #define ST_FIXED_BUFFER_SIZE (ST_FIXED_BUFFER_BLOCKS * ST_KILOBYTE)
157
158 /* The buffer size should fit into the 24 bits for length in the
159 6-byte SCSI read and write commands. */
160 #if ST_FIXED_BUFFER_SIZE >= (2 << 24 - 1)
161 #error "Buffer size should not exceed (2 << 24 - 1) bytes!"
162 #endif
163
164 static int debugging = DEBUG;
165
166 #define MAX_RETRIES 0
167 #define MAX_WRITE_RETRIES 0
168 #define MAX_READY_RETRIES 0
169 #define NO_TAPE NOT_READY
170
171 #define ST_TIMEOUT (900 * HZ)
172 #define ST_LONG_TIMEOUT (14000 * HZ)
173
174 /* Remove mode bits and auto-rewind bit (7) */
175 #define TAPE_NR(x) ( ((iminor(x) & ~255) >> (ST_NBR_MODE_BITS + 1)) | \
176 (iminor(x) & ((1 << ST_MODE_SHIFT)-1)))
177 #define TAPE_MODE(x) ((iminor(x) & ST_MODE_MASK) >> ST_MODE_SHIFT)
178
179 /* Construct the minor number from the device (d), mode (m), and non-rewind (n) data */
180 #define TAPE_MINOR(d, m, n) (((d & ~(255 >> (ST_NBR_MODE_BITS + 1))) << (ST_NBR_MODE_BITS + 1)) | \
181 (d & (255 >> (ST_NBR_MODE_BITS + 1))) | (m << ST_MODE_SHIFT) | ((n != 0) << 7) )
182
183 /* Internal ioctl to set both density (uppermost 8 bits) and blocksize (lower
184 24 bits) */
185 #define SET_DENS_AND_BLK 0x10001
186
187 static int st_fixed_buffer_size = ST_FIXED_BUFFER_SIZE;
188 static int st_max_sg_segs = ST_MAX_SG;
189
190 static int modes_defined;
191
192 static int enlarge_buffer(struct st_buffer *, int);
193 static void clear_buffer(struct st_buffer *);
194 static void normalize_buffer(struct st_buffer *);
195 static int append_to_buffer(const char __user *, struct st_buffer *, int);
196 static int from_buffer(struct st_buffer *, char __user *, int);
197 static void move_buffer_data(struct st_buffer *, int);
198
199 static int sgl_map_user_pages(struct st_buffer *, const unsigned int,
200 unsigned long, size_t, int);
201 static int sgl_unmap_user_pages(struct st_buffer *, const unsigned int, int);
202
203 static int st_probe(struct device *);
204 static int st_remove(struct device *);
205
206 static struct scsi_driver st_template = {
207 .gendrv = {
208 .name = "st",
209 .owner = THIS_MODULE,
210 .probe = st_probe,
211 .remove = st_remove,
212 .groups = st_drv_groups,
213 },
214 };
215
216 static int st_compression(struct scsi_tape *, int);
217
218 static int find_partition(struct scsi_tape *);
219 static int switch_partition(struct scsi_tape *);
220
221 static int st_int_ioctl(struct scsi_tape *, unsigned int, unsigned long);
222
223 static void scsi_tape_release(struct kref *);
224
225 #define to_scsi_tape(obj) container_of(obj, struct scsi_tape, kref)
226
227 static DEFINE_MUTEX(st_ref_mutex);
228 static DEFINE_SPINLOCK(st_index_lock);
229 static DEFINE_SPINLOCK(st_use_lock);
230 static DEFINE_IDR(st_index_idr);
231
232
233
234 #ifndef SIGS_FROM_OSST
235 #define SIGS_FROM_OSST \
236 {"OnStream", "SC-", "", "osst"}, \
237 {"OnStream", "DI-", "", "osst"}, \
238 {"OnStream", "DP-", "", "osst"}, \
239 {"OnStream", "USB", "", "osst"}, \
240 {"OnStream", "FW-", "", "osst"}
241 #endif
242
scsi_tape_get(int dev)243 static struct scsi_tape *scsi_tape_get(int dev)
244 {
245 struct scsi_tape *STp = NULL;
246
247 mutex_lock(&st_ref_mutex);
248 spin_lock(&st_index_lock);
249
250 STp = idr_find(&st_index_idr, dev);
251 if (!STp) goto out;
252
253 kref_get(&STp->kref);
254
255 if (!STp->device)
256 goto out_put;
257
258 if (scsi_device_get(STp->device))
259 goto out_put;
260
261 goto out;
262
263 out_put:
264 kref_put(&STp->kref, scsi_tape_release);
265 STp = NULL;
266 out:
267 spin_unlock(&st_index_lock);
268 mutex_unlock(&st_ref_mutex);
269 return STp;
270 }
271
scsi_tape_put(struct scsi_tape * STp)272 static void scsi_tape_put(struct scsi_tape *STp)
273 {
274 struct scsi_device *sdev = STp->device;
275
276 mutex_lock(&st_ref_mutex);
277 kref_put(&STp->kref, scsi_tape_release);
278 scsi_device_put(sdev);
279 mutex_unlock(&st_ref_mutex);
280 }
281
282 struct st_reject_data {
283 char *vendor;
284 char *model;
285 char *rev;
286 char *driver_hint; /* Name of the correct driver, NULL if unknown */
287 };
288
289 static struct st_reject_data reject_list[] = {
290 /* {"XXX", "Yy-", "", NULL}, example */
291 SIGS_FROM_OSST,
292 {NULL, }};
293
294 /* If the device signature is on the list of incompatible drives, the
295 function returns a pointer to the name of the correct driver (if known) */
st_incompatible(struct scsi_device * SDp)296 static char * st_incompatible(struct scsi_device* SDp)
297 {
298 struct st_reject_data *rp;
299
300 for (rp=&(reject_list[0]); rp->vendor != NULL; rp++)
301 if (!strncmp(rp->vendor, SDp->vendor, strlen(rp->vendor)) &&
302 !strncmp(rp->model, SDp->model, strlen(rp->model)) &&
303 !strncmp(rp->rev, SDp->rev, strlen(rp->rev))) {
304 if (rp->driver_hint)
305 return rp->driver_hint;
306 else
307 return "unknown";
308 }
309 return NULL;
310 }
311
312
313 #define st_printk(prefix, t, fmt, a...) \
314 sdev_prefix_printk(prefix, (t)->device, (t)->name, fmt, ##a)
315 #ifdef DEBUG
316 #define DEBC_printk(t, fmt, a...) \
317 if (debugging) { st_printk(ST_DEB_MSG, t, fmt, ##a ); }
318 #else
319 #define DEBC_printk(t, fmt, a...)
320 #endif
321
st_analyze_sense(struct st_request * SRpnt,struct st_cmdstatus * s)322 static void st_analyze_sense(struct st_request *SRpnt, struct st_cmdstatus *s)
323 {
324 const u8 *ucp;
325 const u8 *sense = SRpnt->sense;
326
327 s->have_sense = scsi_normalize_sense(SRpnt->sense,
328 SCSI_SENSE_BUFFERSIZE, &s->sense_hdr);
329 s->flags = 0;
330
331 if (s->have_sense) {
332 s->deferred = 0;
333 s->remainder_valid =
334 scsi_get_sense_info_fld(sense, SCSI_SENSE_BUFFERSIZE, &s->uremainder64);
335 switch (sense[0] & 0x7f) {
336 case 0x71:
337 s->deferred = 1;
338 fallthrough;
339 case 0x70:
340 s->fixed_format = 1;
341 s->flags = sense[2] & 0xe0;
342 break;
343 case 0x73:
344 s->deferred = 1;
345 fallthrough;
346 case 0x72:
347 s->fixed_format = 0;
348 ucp = scsi_sense_desc_find(sense, SCSI_SENSE_BUFFERSIZE, 4);
349 s->flags = ucp ? (ucp[3] & 0xe0) : 0;
350 break;
351 }
352 }
353 }
354
355
356 /* Convert the result to success code */
st_chk_result(struct scsi_tape * STp,struct st_request * SRpnt)357 static int st_chk_result(struct scsi_tape *STp, struct st_request * SRpnt)
358 {
359 int result = SRpnt->result;
360 u8 scode;
361 DEB(const char *stp;)
362 char *name = STp->name;
363 struct st_cmdstatus *cmdstatp;
364
365 if (!result)
366 return 0;
367
368 cmdstatp = &STp->buffer->cmdstat;
369 st_analyze_sense(SRpnt, cmdstatp);
370
371 if (cmdstatp->have_sense)
372 scode = STp->buffer->cmdstat.sense_hdr.sense_key;
373 else
374 scode = 0;
375
376 DEB(
377 if (debugging) {
378 st_printk(ST_DEB_MSG, STp,
379 "Error: %x, cmd: %x %x %x %x %x %x\n", result,
380 SRpnt->cmd[0], SRpnt->cmd[1], SRpnt->cmd[2],
381 SRpnt->cmd[3], SRpnt->cmd[4], SRpnt->cmd[5]);
382 if (cmdstatp->have_sense)
383 __scsi_print_sense(STp->device, name,
384 SRpnt->sense, SCSI_SENSE_BUFFERSIZE);
385 } ) /* end DEB */
386 if (!debugging) { /* Abnormal conditions for tape */
387 if (!cmdstatp->have_sense)
388 st_printk(KERN_WARNING, STp,
389 "Error %x (driver bt 0, host bt 0x%x).\n",
390 result, host_byte(result));
391 else if (cmdstatp->have_sense &&
392 scode != NO_SENSE &&
393 scode != RECOVERED_ERROR &&
394 /* scode != UNIT_ATTENTION && */
395 scode != BLANK_CHECK &&
396 scode != VOLUME_OVERFLOW &&
397 SRpnt->cmd[0] != MODE_SENSE &&
398 SRpnt->cmd[0] != TEST_UNIT_READY) {
399
400 __scsi_print_sense(STp->device, name,
401 SRpnt->sense, SCSI_SENSE_BUFFERSIZE);
402 }
403 }
404
405 if (cmdstatp->fixed_format &&
406 STp->cln_mode >= EXTENDED_SENSE_START) { /* Only fixed format sense */
407 if (STp->cln_sense_value)
408 STp->cleaning_req |= ((SRpnt->sense[STp->cln_mode] &
409 STp->cln_sense_mask) == STp->cln_sense_value);
410 else
411 STp->cleaning_req |= ((SRpnt->sense[STp->cln_mode] &
412 STp->cln_sense_mask) != 0);
413 }
414 if (cmdstatp->have_sense &&
415 cmdstatp->sense_hdr.asc == 0 && cmdstatp->sense_hdr.ascq == 0x17)
416 STp->cleaning_req = 1; /* ASC and ASCQ => cleaning requested */
417
418 STp->pos_unknown |= STp->device->was_reset;
419
420 if (cmdstatp->have_sense &&
421 scode == RECOVERED_ERROR
422 #if ST_RECOVERED_WRITE_FATAL
423 && SRpnt->cmd[0] != WRITE_6
424 && SRpnt->cmd[0] != WRITE_FILEMARKS
425 #endif
426 ) {
427 STp->recover_count++;
428 STp->recover_reg++;
429
430 DEB(
431 if (debugging) {
432 if (SRpnt->cmd[0] == READ_6)
433 stp = "read";
434 else if (SRpnt->cmd[0] == WRITE_6)
435 stp = "write";
436 else
437 stp = "ioctl";
438 st_printk(ST_DEB_MSG, STp,
439 "Recovered %s error (%d).\n",
440 stp, STp->recover_count);
441 } ) /* end DEB */
442
443 if (cmdstatp->flags == 0)
444 return 0;
445 }
446 return (-EIO);
447 }
448
st_allocate_request(struct scsi_tape * stp)449 static struct st_request *st_allocate_request(struct scsi_tape *stp)
450 {
451 struct st_request *streq;
452
453 streq = kzalloc(sizeof(*streq), GFP_KERNEL);
454 if (streq)
455 streq->stp = stp;
456 else {
457 st_printk(KERN_ERR, stp,
458 "Can't get SCSI request.\n");
459 if (signal_pending(current))
460 stp->buffer->syscall_result = -EINTR;
461 else
462 stp->buffer->syscall_result = -EBUSY;
463 }
464
465 return streq;
466 }
467
st_release_request(struct st_request * streq)468 static void st_release_request(struct st_request *streq)
469 {
470 kfree(streq);
471 }
472
st_do_stats(struct scsi_tape * STp,struct request * req)473 static void st_do_stats(struct scsi_tape *STp, struct request *req)
474 {
475 struct scsi_cmnd *scmd = blk_mq_rq_to_pdu(req);
476 ktime_t now;
477
478 now = ktime_get();
479 if (scmd->cmnd[0] == WRITE_6) {
480 now = ktime_sub(now, STp->stats->write_time);
481 atomic64_add(ktime_to_ns(now), &STp->stats->tot_write_time);
482 atomic64_add(ktime_to_ns(now), &STp->stats->tot_io_time);
483 atomic64_inc(&STp->stats->write_cnt);
484 if (scmd->result) {
485 atomic64_add(atomic_read(&STp->stats->last_write_size)
486 - STp->buffer->cmdstat.residual,
487 &STp->stats->write_byte_cnt);
488 if (STp->buffer->cmdstat.residual > 0)
489 atomic64_inc(&STp->stats->resid_cnt);
490 } else
491 atomic64_add(atomic_read(&STp->stats->last_write_size),
492 &STp->stats->write_byte_cnt);
493 } else if (scmd->cmnd[0] == READ_6) {
494 now = ktime_sub(now, STp->stats->read_time);
495 atomic64_add(ktime_to_ns(now), &STp->stats->tot_read_time);
496 atomic64_add(ktime_to_ns(now), &STp->stats->tot_io_time);
497 atomic64_inc(&STp->stats->read_cnt);
498 if (scmd->result) {
499 atomic64_add(atomic_read(&STp->stats->last_read_size)
500 - STp->buffer->cmdstat.residual,
501 &STp->stats->read_byte_cnt);
502 if (STp->buffer->cmdstat.residual > 0)
503 atomic64_inc(&STp->stats->resid_cnt);
504 } else
505 atomic64_add(atomic_read(&STp->stats->last_read_size),
506 &STp->stats->read_byte_cnt);
507 } else {
508 now = ktime_sub(now, STp->stats->other_time);
509 atomic64_add(ktime_to_ns(now), &STp->stats->tot_io_time);
510 atomic64_inc(&STp->stats->other_cnt);
511 }
512 atomic64_dec(&STp->stats->in_flight);
513 }
514
st_scsi_execute_end(struct request * req,blk_status_t status)515 static enum rq_end_io_ret st_scsi_execute_end(struct request *req,
516 blk_status_t status)
517 {
518 struct scsi_cmnd *scmd = blk_mq_rq_to_pdu(req);
519 struct st_request *SRpnt = req->end_io_data;
520 struct scsi_tape *STp = SRpnt->stp;
521 struct bio *tmp;
522
523 STp->buffer->cmdstat.midlevel_result = SRpnt->result = scmd->result;
524 STp->buffer->cmdstat.residual = scmd->resid_len;
525
526 st_do_stats(STp, req);
527
528 tmp = SRpnt->bio;
529 if (scmd->sense_len)
530 memcpy(SRpnt->sense, scmd->sense_buffer, SCSI_SENSE_BUFFERSIZE);
531 if (SRpnt->waiting)
532 complete(SRpnt->waiting);
533
534 blk_rq_unmap_user(tmp);
535 blk_mq_free_request(req);
536 return RQ_END_IO_NONE;
537 }
538
st_scsi_execute(struct st_request * SRpnt,const unsigned char * cmd,int data_direction,void * buffer,unsigned bufflen,int timeout,int retries)539 static int st_scsi_execute(struct st_request *SRpnt, const unsigned char *cmd,
540 int data_direction, void *buffer, unsigned bufflen,
541 int timeout, int retries)
542 {
543 struct request *req;
544 struct rq_map_data *mdata = &SRpnt->stp->buffer->map_data;
545 int err = 0;
546 struct scsi_tape *STp = SRpnt->stp;
547 struct scsi_cmnd *scmd;
548
549 req = scsi_alloc_request(SRpnt->stp->device->request_queue,
550 data_direction == DMA_TO_DEVICE ?
551 REQ_OP_DRV_OUT : REQ_OP_DRV_IN, 0);
552 if (IS_ERR(req))
553 return PTR_ERR(req);
554 scmd = blk_mq_rq_to_pdu(req);
555 req->rq_flags |= RQF_QUIET;
556
557 mdata->null_mapped = 1;
558
559 if (bufflen) {
560 err = blk_rq_map_user(req->q, req, mdata, NULL, bufflen,
561 GFP_KERNEL);
562 if (err) {
563 blk_mq_free_request(req);
564 return err;
565 }
566 }
567
568 atomic64_inc(&STp->stats->in_flight);
569 if (cmd[0] == WRITE_6) {
570 atomic_set(&STp->stats->last_write_size, bufflen);
571 STp->stats->write_time = ktime_get();
572 } else if (cmd[0] == READ_6) {
573 atomic_set(&STp->stats->last_read_size, bufflen);
574 STp->stats->read_time = ktime_get();
575 } else {
576 STp->stats->other_time = ktime_get();
577 }
578
579 SRpnt->bio = req->bio;
580 scmd->cmd_len = COMMAND_SIZE(cmd[0]);
581 memcpy(scmd->cmnd, cmd, scmd->cmd_len);
582 req->timeout = timeout;
583 scmd->allowed = retries;
584 req->end_io = st_scsi_execute_end;
585 req->end_io_data = SRpnt;
586
587 blk_execute_rq_nowait(req, true);
588 return 0;
589 }
590
591 /* Do the scsi command. Waits until command performed if do_wait is true.
592 Otherwise write_behind_check() is used to check that the command
593 has finished. */
594 static struct st_request *
st_do_scsi(struct st_request * SRpnt,struct scsi_tape * STp,unsigned char * cmd,int bytes,int direction,int timeout,int retries,int do_wait)595 st_do_scsi(struct st_request * SRpnt, struct scsi_tape * STp, unsigned char *cmd,
596 int bytes, int direction, int timeout, int retries, int do_wait)
597 {
598 struct completion *waiting;
599 struct rq_map_data *mdata = &STp->buffer->map_data;
600 int ret;
601
602 /* if async, make sure there's no command outstanding */
603 if (!do_wait && ((STp->buffer)->last_SRpnt)) {
604 st_printk(KERN_ERR, STp,
605 "Async command already active.\n");
606 if (signal_pending(current))
607 (STp->buffer)->syscall_result = (-EINTR);
608 else
609 (STp->buffer)->syscall_result = (-EBUSY);
610 return NULL;
611 }
612
613 if (!SRpnt) {
614 SRpnt = st_allocate_request(STp);
615 if (!SRpnt)
616 return NULL;
617 }
618
619 /* If async IO, set last_SRpnt. This ptr tells write_behind_check
620 which IO is outstanding. It's nulled out when the IO completes. */
621 if (!do_wait)
622 (STp->buffer)->last_SRpnt = SRpnt;
623
624 waiting = &STp->wait;
625 init_completion(waiting);
626 SRpnt->waiting = waiting;
627
628 if (STp->buffer->do_dio) {
629 mdata->page_order = 0;
630 mdata->nr_entries = STp->buffer->sg_segs;
631 mdata->pages = STp->buffer->mapped_pages;
632 } else {
633 mdata->page_order = STp->buffer->reserved_page_order;
634 mdata->nr_entries =
635 DIV_ROUND_UP(bytes, PAGE_SIZE << mdata->page_order);
636 mdata->pages = STp->buffer->reserved_pages;
637 mdata->offset = 0;
638 }
639
640 memcpy(SRpnt->cmd, cmd, sizeof(SRpnt->cmd));
641 STp->buffer->cmdstat.have_sense = 0;
642 STp->buffer->syscall_result = 0;
643
644 ret = st_scsi_execute(SRpnt, cmd, direction, NULL, bytes, timeout,
645 retries);
646 if (ret) {
647 /* could not allocate the buffer or request was too large */
648 (STp->buffer)->syscall_result = (-EBUSY);
649 (STp->buffer)->last_SRpnt = NULL;
650 } else if (do_wait) {
651 wait_for_completion(waiting);
652 SRpnt->waiting = NULL;
653 (STp->buffer)->syscall_result = st_chk_result(STp, SRpnt);
654 }
655
656 return SRpnt;
657 }
658
659
660 /* Handle the write-behind checking (waits for completion). Returns -ENOSPC if
661 write has been correct but EOM early warning reached, -EIO if write ended in
662 error or zero if write successful. Asynchronous writes are used only in
663 variable block mode. */
write_behind_check(struct scsi_tape * STp)664 static int write_behind_check(struct scsi_tape * STp)
665 {
666 int retval = 0;
667 struct st_buffer *STbuffer;
668 struct st_partstat *STps;
669 struct st_cmdstatus *cmdstatp;
670 struct st_request *SRpnt;
671
672 STbuffer = STp->buffer;
673 if (!STbuffer->writing)
674 return 0;
675
676 DEB(
677 if (STp->write_pending)
678 STp->nbr_waits++;
679 else
680 STp->nbr_finished++;
681 ) /* end DEB */
682
683 wait_for_completion(&(STp->wait));
684 SRpnt = STbuffer->last_SRpnt;
685 STbuffer->last_SRpnt = NULL;
686 SRpnt->waiting = NULL;
687
688 (STp->buffer)->syscall_result = st_chk_result(STp, SRpnt);
689 st_release_request(SRpnt);
690
691 STbuffer->buffer_bytes -= STbuffer->writing;
692 STps = &(STp->ps[STp->partition]);
693 if (STps->drv_block >= 0) {
694 if (STp->block_size == 0)
695 STps->drv_block++;
696 else
697 STps->drv_block += STbuffer->writing / STp->block_size;
698 }
699
700 cmdstatp = &STbuffer->cmdstat;
701 if (STbuffer->syscall_result) {
702 retval = -EIO;
703 if (cmdstatp->have_sense && !cmdstatp->deferred &&
704 (cmdstatp->flags & SENSE_EOM) &&
705 (cmdstatp->sense_hdr.sense_key == NO_SENSE ||
706 cmdstatp->sense_hdr.sense_key == RECOVERED_ERROR)) {
707 /* EOM at write-behind, has all data been written? */
708 if (!cmdstatp->remainder_valid ||
709 cmdstatp->uremainder64 == 0)
710 retval = -ENOSPC;
711 }
712 if (retval == -EIO)
713 STps->drv_block = -1;
714 }
715 STbuffer->writing = 0;
716
717 DEB(if (debugging && retval)
718 st_printk(ST_DEB_MSG, STp,
719 "Async write error %x, return value %d.\n",
720 STbuffer->cmdstat.midlevel_result, retval);) /* end DEB */
721
722 return retval;
723 }
724
725
726 /* Step over EOF if it has been inadvertently crossed (ioctl not used because
727 it messes up the block number). */
cross_eof(struct scsi_tape * STp,int forward)728 static int cross_eof(struct scsi_tape * STp, int forward)
729 {
730 struct st_request *SRpnt;
731 unsigned char cmd[MAX_COMMAND_SIZE];
732
733 cmd[0] = SPACE;
734 cmd[1] = 0x01; /* Space FileMarks */
735 if (forward) {
736 cmd[2] = cmd[3] = 0;
737 cmd[4] = 1;
738 } else
739 cmd[2] = cmd[3] = cmd[4] = 0xff; /* -1 filemarks */
740 cmd[5] = 0;
741
742 DEBC_printk(STp, "Stepping over filemark %s.\n",
743 forward ? "forward" : "backward");
744
745 SRpnt = st_do_scsi(NULL, STp, cmd, 0, DMA_NONE,
746 STp->device->request_queue->rq_timeout,
747 MAX_RETRIES, 1);
748 if (!SRpnt)
749 return (STp->buffer)->syscall_result;
750
751 st_release_request(SRpnt);
752 SRpnt = NULL;
753
754 if ((STp->buffer)->cmdstat.midlevel_result != 0)
755 st_printk(KERN_ERR, STp,
756 "Stepping over filemark %s failed.\n",
757 forward ? "forward" : "backward");
758
759 return (STp->buffer)->syscall_result;
760 }
761
762
763 /* Flush the write buffer (never need to write if variable blocksize). */
st_flush_write_buffer(struct scsi_tape * STp)764 static int st_flush_write_buffer(struct scsi_tape * STp)
765 {
766 int transfer, blks;
767 int result;
768 unsigned char cmd[MAX_COMMAND_SIZE];
769 struct st_request *SRpnt;
770 struct st_partstat *STps;
771
772 result = write_behind_check(STp);
773 if (result)
774 return result;
775
776 result = 0;
777 if (STp->dirty == 1) {
778
779 transfer = STp->buffer->buffer_bytes;
780 DEBC_printk(STp, "Flushing %d bytes.\n", transfer);
781
782 memset(cmd, 0, MAX_COMMAND_SIZE);
783 cmd[0] = WRITE_6;
784 cmd[1] = 1;
785 blks = transfer / STp->block_size;
786 cmd[2] = blks >> 16;
787 cmd[3] = blks >> 8;
788 cmd[4] = blks;
789
790 SRpnt = st_do_scsi(NULL, STp, cmd, transfer, DMA_TO_DEVICE,
791 STp->device->request_queue->rq_timeout,
792 MAX_WRITE_RETRIES, 1);
793 if (!SRpnt)
794 return (STp->buffer)->syscall_result;
795
796 STps = &(STp->ps[STp->partition]);
797 if ((STp->buffer)->syscall_result != 0) {
798 struct st_cmdstatus *cmdstatp = &STp->buffer->cmdstat;
799
800 if (cmdstatp->have_sense && !cmdstatp->deferred &&
801 (cmdstatp->flags & SENSE_EOM) &&
802 (cmdstatp->sense_hdr.sense_key == NO_SENSE ||
803 cmdstatp->sense_hdr.sense_key == RECOVERED_ERROR) &&
804 (!cmdstatp->remainder_valid ||
805 cmdstatp->uremainder64 == 0)) { /* All written at EOM early warning */
806 STp->dirty = 0;
807 (STp->buffer)->buffer_bytes = 0;
808 if (STps->drv_block >= 0)
809 STps->drv_block += blks;
810 result = (-ENOSPC);
811 } else {
812 st_printk(KERN_ERR, STp, "Error on flush.\n");
813 STps->drv_block = (-1);
814 result = (-EIO);
815 }
816 } else {
817 if (STps->drv_block >= 0)
818 STps->drv_block += blks;
819 STp->dirty = 0;
820 (STp->buffer)->buffer_bytes = 0;
821 }
822 st_release_request(SRpnt);
823 SRpnt = NULL;
824 }
825 return result;
826 }
827
828
829 /* Flush the tape buffer. The tape will be positioned correctly unless
830 seek_next is true. */
flush_buffer(struct scsi_tape * STp,int seek_next)831 static int flush_buffer(struct scsi_tape *STp, int seek_next)
832 {
833 int backspace, result;
834 struct st_partstat *STps;
835
836 /*
837 * If there was a bus reset, block further access
838 * to this device.
839 */
840 if (STp->pos_unknown)
841 return (-EIO);
842
843 if (STp->ready != ST_READY)
844 return 0;
845 STps = &(STp->ps[STp->partition]);
846 if (STps->rw == ST_WRITING) /* Writing */
847 return st_flush_write_buffer(STp);
848
849 if (STp->block_size == 0)
850 return 0;
851
852 backspace = ((STp->buffer)->buffer_bytes +
853 (STp->buffer)->read_pointer) / STp->block_size -
854 ((STp->buffer)->read_pointer + STp->block_size - 1) /
855 STp->block_size;
856 (STp->buffer)->buffer_bytes = 0;
857 (STp->buffer)->read_pointer = 0;
858 result = 0;
859 if (!seek_next) {
860 if (STps->eof == ST_FM_HIT) {
861 result = cross_eof(STp, 0); /* Back over the EOF hit */
862 if (!result)
863 STps->eof = ST_NOEOF;
864 else {
865 if (STps->drv_file >= 0)
866 STps->drv_file++;
867 STps->drv_block = 0;
868 }
869 }
870 if (!result && backspace > 0)
871 result = st_int_ioctl(STp, MTBSR, backspace);
872 } else if (STps->eof == ST_FM_HIT) {
873 if (STps->drv_file >= 0)
874 STps->drv_file++;
875 STps->drv_block = 0;
876 STps->eof = ST_NOEOF;
877 }
878 return result;
879
880 }
881
882 /* Set the mode parameters */
set_mode_densblk(struct scsi_tape * STp,struct st_modedef * STm)883 static int set_mode_densblk(struct scsi_tape * STp, struct st_modedef * STm)
884 {
885 int set_it = 0;
886 unsigned long arg;
887
888 if (!STp->density_changed &&
889 STm->default_density >= 0 &&
890 STm->default_density != STp->density) {
891 arg = STm->default_density;
892 set_it = 1;
893 } else
894 arg = STp->density;
895 arg <<= MT_ST_DENSITY_SHIFT;
896 if (!STp->blksize_changed &&
897 STm->default_blksize >= 0 &&
898 STm->default_blksize != STp->block_size) {
899 arg |= STm->default_blksize;
900 set_it = 1;
901 } else
902 arg |= STp->block_size;
903 if (set_it &&
904 st_int_ioctl(STp, SET_DENS_AND_BLK, arg)) {
905 st_printk(KERN_WARNING, STp,
906 "Can't set default block size to %d bytes "
907 "and density %x.\n",
908 STm->default_blksize, STm->default_density);
909 if (modes_defined)
910 return (-EINVAL);
911 }
912 return 0;
913 }
914
915
916 /* Lock or unlock the drive door. Don't use when st_request allocated. */
do_door_lock(struct scsi_tape * STp,int do_lock)917 static int do_door_lock(struct scsi_tape * STp, int do_lock)
918 {
919 int retval;
920
921 DEBC_printk(STp, "%socking drive door.\n", do_lock ? "L" : "Unl");
922
923 retval = scsi_set_medium_removal(STp->device,
924 do_lock ? SCSI_REMOVAL_PREVENT : SCSI_REMOVAL_ALLOW);
925 if (!retval)
926 STp->door_locked = do_lock ? ST_LOCKED_EXPLICIT : ST_UNLOCKED;
927 else
928 STp->door_locked = ST_LOCK_FAILS;
929 return retval;
930 }
931
932
933 /* Set the internal state after reset */
reset_state(struct scsi_tape * STp)934 static void reset_state(struct scsi_tape *STp)
935 {
936 int i;
937 struct st_partstat *STps;
938
939 STp->pos_unknown = 0;
940 for (i = 0; i < ST_NBR_PARTITIONS; i++) {
941 STps = &(STp->ps[i]);
942 STps->rw = ST_IDLE;
943 STps->eof = ST_NOEOF;
944 STps->at_sm = 0;
945 STps->last_block_valid = 0;
946 STps->drv_block = -1;
947 STps->drv_file = -1;
948 }
949 if (STp->can_partitions) {
950 STp->partition = find_partition(STp);
951 if (STp->partition < 0)
952 STp->partition = 0;
953 STp->new_partition = STp->partition;
954 }
955 }
956
957 /* Test if the drive is ready. Returns either one of the codes below or a negative system
958 error code. */
959 #define CHKRES_READY 0
960 #define CHKRES_NEW_SESSION 1
961 #define CHKRES_NOT_READY 2
962 #define CHKRES_NO_TAPE 3
963
964 #define MAX_ATTENTIONS 10
965
test_ready(struct scsi_tape * STp,int do_wait)966 static int test_ready(struct scsi_tape *STp, int do_wait)
967 {
968 int attentions, waits, max_wait, scode;
969 int retval = CHKRES_READY, new_session = 0;
970 unsigned char cmd[MAX_COMMAND_SIZE];
971 struct st_request *SRpnt = NULL;
972 struct st_cmdstatus *cmdstatp = &STp->buffer->cmdstat;
973
974 max_wait = do_wait ? ST_BLOCK_SECONDS : 0;
975
976 for (attentions=waits=0; ; ) {
977 memset((void *) &cmd[0], 0, MAX_COMMAND_SIZE);
978 cmd[0] = TEST_UNIT_READY;
979 SRpnt = st_do_scsi(SRpnt, STp, cmd, 0, DMA_NONE,
980 STp->long_timeout, MAX_READY_RETRIES, 1);
981
982 if (!SRpnt) {
983 retval = (STp->buffer)->syscall_result;
984 break;
985 }
986
987 if (cmdstatp->have_sense) {
988
989 scode = cmdstatp->sense_hdr.sense_key;
990
991 if (scode == UNIT_ATTENTION) { /* New media? */
992 new_session = 1;
993 if (attentions < MAX_ATTENTIONS) {
994 attentions++;
995 continue;
996 }
997 else {
998 retval = (-EIO);
999 break;
1000 }
1001 }
1002
1003 if (scode == NOT_READY) {
1004 if (waits < max_wait) {
1005 if (msleep_interruptible(1000)) {
1006 retval = (-EINTR);
1007 break;
1008 }
1009 waits++;
1010 continue;
1011 }
1012 else {
1013 if ((STp->device)->scsi_level >= SCSI_2 &&
1014 cmdstatp->sense_hdr.asc == 0x3a) /* Check ASC */
1015 retval = CHKRES_NO_TAPE;
1016 else
1017 retval = CHKRES_NOT_READY;
1018 break;
1019 }
1020 }
1021 }
1022
1023 retval = (STp->buffer)->syscall_result;
1024 if (!retval)
1025 retval = new_session ? CHKRES_NEW_SESSION : CHKRES_READY;
1026 break;
1027 }
1028
1029 if (SRpnt != NULL)
1030 st_release_request(SRpnt);
1031 return retval;
1032 }
1033
1034
1035 /* See if the drive is ready and gather information about the tape. Return values:
1036 < 0 negative error code from errno.h
1037 0 drive ready
1038 1 drive not ready (possibly no tape)
1039 */
check_tape(struct scsi_tape * STp,struct file * filp)1040 static int check_tape(struct scsi_tape *STp, struct file *filp)
1041 {
1042 int i, retval, new_session = 0, do_wait;
1043 unsigned char cmd[MAX_COMMAND_SIZE], saved_cleaning;
1044 unsigned short st_flags = filp->f_flags;
1045 struct st_request *SRpnt = NULL;
1046 struct st_modedef *STm;
1047 struct st_partstat *STps;
1048 struct inode *inode = file_inode(filp);
1049 int mode = TAPE_MODE(inode);
1050
1051 STp->ready = ST_READY;
1052
1053 if (mode != STp->current_mode) {
1054 DEBC_printk(STp, "Mode change from %d to %d.\n",
1055 STp->current_mode, mode);
1056 new_session = 1;
1057 STp->current_mode = mode;
1058 }
1059 STm = &(STp->modes[STp->current_mode]);
1060
1061 saved_cleaning = STp->cleaning_req;
1062 STp->cleaning_req = 0;
1063
1064 do_wait = ((filp->f_flags & O_NONBLOCK) == 0);
1065 retval = test_ready(STp, do_wait);
1066
1067 if (retval < 0)
1068 goto err_out;
1069
1070 if (retval == CHKRES_NEW_SESSION) {
1071 STp->pos_unknown = 0;
1072 STp->partition = STp->new_partition = 0;
1073 if (STp->can_partitions)
1074 STp->nbr_partitions = 1; /* This guess will be updated later
1075 if necessary */
1076 for (i = 0; i < ST_NBR_PARTITIONS; i++) {
1077 STps = &(STp->ps[i]);
1078 STps->rw = ST_IDLE;
1079 STps->eof = ST_NOEOF;
1080 STps->at_sm = 0;
1081 STps->last_block_valid = 0;
1082 STps->drv_block = 0;
1083 STps->drv_file = 0;
1084 }
1085 new_session = 1;
1086 }
1087 else {
1088 STp->cleaning_req |= saved_cleaning;
1089
1090 if (retval == CHKRES_NOT_READY || retval == CHKRES_NO_TAPE) {
1091 if (retval == CHKRES_NO_TAPE)
1092 STp->ready = ST_NO_TAPE;
1093 else
1094 STp->ready = ST_NOT_READY;
1095
1096 STp->density = 0; /* Clear the erroneous "residue" */
1097 STp->write_prot = 0;
1098 STp->block_size = 0;
1099 STp->ps[0].drv_file = STp->ps[0].drv_block = (-1);
1100 STp->partition = STp->new_partition = 0;
1101 STp->door_locked = ST_UNLOCKED;
1102 return CHKRES_NOT_READY;
1103 }
1104 }
1105
1106 if (STp->omit_blklims)
1107 STp->min_block = STp->max_block = (-1);
1108 else {
1109 memset((void *) &cmd[0], 0, MAX_COMMAND_SIZE);
1110 cmd[0] = READ_BLOCK_LIMITS;
1111
1112 SRpnt = st_do_scsi(SRpnt, STp, cmd, 6, DMA_FROM_DEVICE,
1113 STp->device->request_queue->rq_timeout,
1114 MAX_READY_RETRIES, 1);
1115 if (!SRpnt) {
1116 retval = (STp->buffer)->syscall_result;
1117 goto err_out;
1118 }
1119
1120 if (!SRpnt->result && !STp->buffer->cmdstat.have_sense) {
1121 STp->max_block = ((STp->buffer)->b_data[1] << 16) |
1122 ((STp->buffer)->b_data[2] << 8) | (STp->buffer)->b_data[3];
1123 STp->min_block = ((STp->buffer)->b_data[4] << 8) |
1124 (STp->buffer)->b_data[5];
1125 if ( DEB( debugging || ) !STp->inited)
1126 st_printk(KERN_INFO, STp,
1127 "Block limits %d - %d bytes.\n",
1128 STp->min_block, STp->max_block);
1129 } else {
1130 STp->min_block = STp->max_block = (-1);
1131 DEBC_printk(STp, "Can't read block limits.\n");
1132 }
1133 }
1134
1135 memset((void *) &cmd[0], 0, MAX_COMMAND_SIZE);
1136 cmd[0] = MODE_SENSE;
1137 cmd[4] = 12;
1138
1139 SRpnt = st_do_scsi(SRpnt, STp, cmd, 12, DMA_FROM_DEVICE,
1140 STp->device->request_queue->rq_timeout,
1141 MAX_READY_RETRIES, 1);
1142 if (!SRpnt) {
1143 retval = (STp->buffer)->syscall_result;
1144 goto err_out;
1145 }
1146
1147 if ((STp->buffer)->syscall_result != 0) {
1148 DEBC_printk(STp, "No Mode Sense.\n");
1149 STp->block_size = ST_DEFAULT_BLOCK; /* Educated guess (?) */
1150 (STp->buffer)->syscall_result = 0; /* Prevent error propagation */
1151 STp->drv_write_prot = 0;
1152 } else {
1153 DEBC_printk(STp,"Mode sense. Length %d, "
1154 "medium %x, WBS %x, BLL %d\n",
1155 (STp->buffer)->b_data[0],
1156 (STp->buffer)->b_data[1],
1157 (STp->buffer)->b_data[2],
1158 (STp->buffer)->b_data[3]);
1159
1160 if ((STp->buffer)->b_data[3] >= 8) {
1161 STp->drv_buffer = ((STp->buffer)->b_data[2] >> 4) & 7;
1162 STp->density = (STp->buffer)->b_data[4];
1163 STp->block_size = (STp->buffer)->b_data[9] * 65536 +
1164 (STp->buffer)->b_data[10] * 256 + (STp->buffer)->b_data[11];
1165 DEBC_printk(STp, "Density %x, tape length: %x, "
1166 "drv buffer: %d\n",
1167 STp->density,
1168 (STp->buffer)->b_data[5] * 65536 +
1169 (STp->buffer)->b_data[6] * 256 +
1170 (STp->buffer)->b_data[7],
1171 STp->drv_buffer);
1172 }
1173 STp->drv_write_prot = ((STp->buffer)->b_data[2] & 0x80) != 0;
1174 if (!STp->drv_buffer && STp->immediate_filemark) {
1175 st_printk(KERN_WARNING, STp,
1176 "non-buffered tape: disabling "
1177 "writing immediate filemarks\n");
1178 STp->immediate_filemark = 0;
1179 }
1180 }
1181 st_release_request(SRpnt);
1182 SRpnt = NULL;
1183 STp->inited = 1;
1184
1185 if (STp->block_size > 0)
1186 (STp->buffer)->buffer_blocks =
1187 (STp->buffer)->buffer_size / STp->block_size;
1188 else
1189 (STp->buffer)->buffer_blocks = 1;
1190 (STp->buffer)->buffer_bytes = (STp->buffer)->read_pointer = 0;
1191
1192 DEBC_printk(STp, "Block size: %d, buffer size: %d (%d blocks).\n",
1193 STp->block_size, (STp->buffer)->buffer_size,
1194 (STp->buffer)->buffer_blocks);
1195
1196 if (STp->drv_write_prot) {
1197 STp->write_prot = 1;
1198
1199 DEBC_printk(STp, "Write protected\n");
1200
1201 if (do_wait &&
1202 ((st_flags & O_ACCMODE) == O_WRONLY ||
1203 (st_flags & O_ACCMODE) == O_RDWR)) {
1204 retval = (-EROFS);
1205 goto err_out;
1206 }
1207 }
1208
1209 if (STp->can_partitions && STp->nbr_partitions < 1) {
1210 /* This code is reached when the device is opened for the first time
1211 after the driver has been initialized with tape in the drive and the
1212 partition support has been enabled. */
1213 DEBC_printk(STp, "Updating partition number in status.\n");
1214 if ((STp->partition = find_partition(STp)) < 0) {
1215 retval = STp->partition;
1216 goto err_out;
1217 }
1218 STp->new_partition = STp->partition;
1219 STp->nbr_partitions = 1; /* This guess will be updated when necessary */
1220 }
1221
1222 if (new_session) { /* Change the drive parameters for the new mode */
1223 STp->density_changed = STp->blksize_changed = 0;
1224 STp->compression_changed = 0;
1225 if (!(STm->defaults_for_writes) &&
1226 (retval = set_mode_densblk(STp, STm)) < 0)
1227 goto err_out;
1228
1229 if (STp->default_drvbuffer != 0xff) {
1230 if (st_int_ioctl(STp, MTSETDRVBUFFER, STp->default_drvbuffer))
1231 st_printk(KERN_WARNING, STp,
1232 "Can't set default drive "
1233 "buffering to %d.\n",
1234 STp->default_drvbuffer);
1235 }
1236 }
1237
1238 return CHKRES_READY;
1239
1240 err_out:
1241 return retval;
1242 }
1243
1244
1245 /* Open the device. Needs to take the BKL only because of incrementing the SCSI host
1246 module count. */
st_open(struct inode * inode,struct file * filp)1247 static int st_open(struct inode *inode, struct file *filp)
1248 {
1249 int i, retval = (-EIO);
1250 int resumed = 0;
1251 struct scsi_tape *STp;
1252 struct st_partstat *STps;
1253 int dev = TAPE_NR(inode);
1254
1255 /*
1256 * We really want to do nonseekable_open(inode, filp); here, but some
1257 * versions of tar incorrectly call lseek on tapes and bail out if that
1258 * fails. So we disallow pread() and pwrite(), but permit lseeks.
1259 */
1260 filp->f_mode &= ~(FMODE_PREAD | FMODE_PWRITE);
1261
1262 if (!(STp = scsi_tape_get(dev))) {
1263 return -ENXIO;
1264 }
1265
1266 filp->private_data = STp;
1267
1268 spin_lock(&st_use_lock);
1269 if (STp->in_use) {
1270 spin_unlock(&st_use_lock);
1271 DEBC_printk(STp, "Device already in use.\n");
1272 scsi_tape_put(STp);
1273 return (-EBUSY);
1274 }
1275
1276 STp->in_use = 1;
1277 spin_unlock(&st_use_lock);
1278 STp->rew_at_close = STp->autorew_dev = (iminor(inode) & 0x80) == 0;
1279
1280 if (scsi_autopm_get_device(STp->device) < 0) {
1281 retval = -EIO;
1282 goto err_out;
1283 }
1284 resumed = 1;
1285 if (!scsi_block_when_processing_errors(STp->device)) {
1286 retval = (-ENXIO);
1287 goto err_out;
1288 }
1289
1290 /* See that we have at least a one page buffer available */
1291 if (!enlarge_buffer(STp->buffer, PAGE_SIZE)) {
1292 st_printk(KERN_WARNING, STp,
1293 "Can't allocate one page tape buffer.\n");
1294 retval = (-EOVERFLOW);
1295 goto err_out;
1296 }
1297
1298 (STp->buffer)->cleared = 0;
1299 (STp->buffer)->writing = 0;
1300 (STp->buffer)->syscall_result = 0;
1301
1302 STp->write_prot = ((filp->f_flags & O_ACCMODE) == O_RDONLY);
1303
1304 STp->dirty = 0;
1305 for (i = 0; i < ST_NBR_PARTITIONS; i++) {
1306 STps = &(STp->ps[i]);
1307 STps->rw = ST_IDLE;
1308 }
1309 STp->try_dio_now = STp->try_dio;
1310 STp->recover_count = 0;
1311 DEB( STp->nbr_waits = STp->nbr_finished = 0;
1312 STp->nbr_requests = STp->nbr_dio = STp->nbr_pages = 0; )
1313
1314 retval = check_tape(STp, filp);
1315 if (retval < 0)
1316 goto err_out;
1317 if ((filp->f_flags & O_NONBLOCK) == 0 &&
1318 retval != CHKRES_READY) {
1319 if (STp->ready == NO_TAPE)
1320 retval = (-ENOMEDIUM);
1321 else
1322 retval = (-EIO);
1323 goto err_out;
1324 }
1325 return 0;
1326
1327 err_out:
1328 normalize_buffer(STp->buffer);
1329 spin_lock(&st_use_lock);
1330 STp->in_use = 0;
1331 spin_unlock(&st_use_lock);
1332 if (resumed)
1333 scsi_autopm_put_device(STp->device);
1334 scsi_tape_put(STp);
1335 return retval;
1336
1337 }
1338
1339
1340 /* Flush the tape buffer before close */
st_flush(struct file * filp,fl_owner_t id)1341 static int st_flush(struct file *filp, fl_owner_t id)
1342 {
1343 int result = 0, result2;
1344 unsigned char cmd[MAX_COMMAND_SIZE];
1345 struct st_request *SRpnt;
1346 struct scsi_tape *STp = filp->private_data;
1347 struct st_modedef *STm = &(STp->modes[STp->current_mode]);
1348 struct st_partstat *STps = &(STp->ps[STp->partition]);
1349
1350 if (file_count(filp) > 1)
1351 return 0;
1352
1353 if (STps->rw == ST_WRITING && !STp->pos_unknown) {
1354 result = st_flush_write_buffer(STp);
1355 if (result != 0 && result != (-ENOSPC))
1356 goto out;
1357 }
1358
1359 if (STp->can_partitions &&
1360 (result2 = switch_partition(STp)) < 0) {
1361 DEBC_printk(STp, "switch_partition at close failed.\n");
1362 if (result == 0)
1363 result = result2;
1364 goto out;
1365 }
1366
1367 DEBC( if (STp->nbr_requests)
1368 st_printk(KERN_DEBUG, STp,
1369 "Number of r/w requests %d, dio used in %d, "
1370 "pages %d.\n", STp->nbr_requests, STp->nbr_dio,
1371 STp->nbr_pages));
1372
1373 if (STps->rw == ST_WRITING && !STp->pos_unknown) {
1374 struct st_cmdstatus *cmdstatp = &STp->buffer->cmdstat;
1375
1376 #if DEBUG
1377 DEBC_printk(STp, "Async write waits %d, finished %d.\n",
1378 STp->nbr_waits, STp->nbr_finished);
1379 #endif
1380 memset(cmd, 0, MAX_COMMAND_SIZE);
1381 cmd[0] = WRITE_FILEMARKS;
1382 if (STp->immediate_filemark)
1383 cmd[1] = 1;
1384 cmd[4] = 1 + STp->two_fm;
1385
1386 SRpnt = st_do_scsi(NULL, STp, cmd, 0, DMA_NONE,
1387 STp->device->request_queue->rq_timeout,
1388 MAX_WRITE_RETRIES, 1);
1389 if (!SRpnt) {
1390 result = (STp->buffer)->syscall_result;
1391 goto out;
1392 }
1393
1394 if (STp->buffer->syscall_result == 0 ||
1395 (cmdstatp->have_sense && !cmdstatp->deferred &&
1396 (cmdstatp->flags & SENSE_EOM) &&
1397 (cmdstatp->sense_hdr.sense_key == NO_SENSE ||
1398 cmdstatp->sense_hdr.sense_key == RECOVERED_ERROR) &&
1399 (!cmdstatp->remainder_valid || cmdstatp->uremainder64 == 0))) {
1400 /* Write successful at EOM */
1401 st_release_request(SRpnt);
1402 SRpnt = NULL;
1403 if (STps->drv_file >= 0)
1404 STps->drv_file++;
1405 STps->drv_block = 0;
1406 if (STp->two_fm)
1407 cross_eof(STp, 0);
1408 STps->eof = ST_FM;
1409 }
1410 else { /* Write error */
1411 st_release_request(SRpnt);
1412 SRpnt = NULL;
1413 st_printk(KERN_ERR, STp,
1414 "Error on write filemark.\n");
1415 if (result == 0)
1416 result = (-EIO);
1417 }
1418
1419 DEBC_printk(STp, "Buffer flushed, %d EOF(s) written\n", cmd[4]);
1420 } else if (!STp->rew_at_close) {
1421 STps = &(STp->ps[STp->partition]);
1422 if (!STm->sysv || STps->rw != ST_READING) {
1423 if (STp->can_bsr)
1424 result = flush_buffer(STp, 0);
1425 else if (STps->eof == ST_FM_HIT) {
1426 result = cross_eof(STp, 0);
1427 if (result) {
1428 if (STps->drv_file >= 0)
1429 STps->drv_file++;
1430 STps->drv_block = 0;
1431 STps->eof = ST_FM;
1432 } else
1433 STps->eof = ST_NOEOF;
1434 }
1435 } else if ((STps->eof == ST_NOEOF &&
1436 !(result = cross_eof(STp, 1))) ||
1437 STps->eof == ST_FM_HIT) {
1438 if (STps->drv_file >= 0)
1439 STps->drv_file++;
1440 STps->drv_block = 0;
1441 STps->eof = ST_FM;
1442 }
1443 }
1444
1445 out:
1446 if (STp->rew_at_close) {
1447 result2 = st_int_ioctl(STp, MTREW, 1);
1448 if (result == 0)
1449 result = result2;
1450 }
1451 return result;
1452 }
1453
1454
1455 /* Close the device and release it. BKL is not needed: this is the only thread
1456 accessing this tape. */
st_release(struct inode * inode,struct file * filp)1457 static int st_release(struct inode *inode, struct file *filp)
1458 {
1459 struct scsi_tape *STp = filp->private_data;
1460
1461 if (STp->door_locked == ST_LOCKED_AUTO)
1462 do_door_lock(STp, 0);
1463
1464 normalize_buffer(STp->buffer);
1465 spin_lock(&st_use_lock);
1466 STp->in_use = 0;
1467 spin_unlock(&st_use_lock);
1468 scsi_autopm_put_device(STp->device);
1469 scsi_tape_put(STp);
1470
1471 return 0;
1472 }
1473
1474 /* The checks common to both reading and writing */
rw_checks(struct scsi_tape * STp,struct file * filp,size_t count)1475 static ssize_t rw_checks(struct scsi_tape *STp, struct file *filp, size_t count)
1476 {
1477 ssize_t retval = 0;
1478
1479 /*
1480 * If we are in the middle of error recovery, don't let anyone
1481 * else try and use this device. Also, if error recovery fails, it
1482 * may try and take the device offline, in which case all further
1483 * access to the device is prohibited.
1484 */
1485 if (!scsi_block_when_processing_errors(STp->device)) {
1486 retval = (-ENXIO);
1487 goto out;
1488 }
1489
1490 if (STp->ready != ST_READY) {
1491 if (STp->ready == ST_NO_TAPE)
1492 retval = (-ENOMEDIUM);
1493 else
1494 retval = (-EIO);
1495 goto out;
1496 }
1497
1498 if (! STp->modes[STp->current_mode].defined) {
1499 retval = (-ENXIO);
1500 goto out;
1501 }
1502
1503
1504 /*
1505 * If there was a bus reset, block further access
1506 * to this device.
1507 */
1508 if (STp->pos_unknown) {
1509 retval = (-EIO);
1510 goto out;
1511 }
1512
1513 if (count == 0)
1514 goto out;
1515
1516 DEB(
1517 if (!STp->in_use) {
1518 st_printk(ST_DEB_MSG, STp,
1519 "Incorrect device.\n");
1520 retval = (-EIO);
1521 goto out;
1522 } ) /* end DEB */
1523
1524 if (STp->can_partitions &&
1525 (retval = switch_partition(STp)) < 0)
1526 goto out;
1527
1528 if (STp->block_size == 0 && STp->max_block > 0 &&
1529 (count < STp->min_block || count > STp->max_block)) {
1530 retval = (-EINVAL);
1531 goto out;
1532 }
1533
1534 if (STp->do_auto_lock && STp->door_locked == ST_UNLOCKED &&
1535 !do_door_lock(STp, 1))
1536 STp->door_locked = ST_LOCKED_AUTO;
1537
1538 out:
1539 return retval;
1540 }
1541
1542
setup_buffering(struct scsi_tape * STp,const char __user * buf,size_t count,int is_read)1543 static int setup_buffering(struct scsi_tape *STp, const char __user *buf,
1544 size_t count, int is_read)
1545 {
1546 int i, bufsize, retval = 0;
1547 struct st_buffer *STbp = STp->buffer;
1548
1549 if (is_read)
1550 i = STp->try_dio_now && try_rdio;
1551 else
1552 i = STp->try_dio_now && try_wdio;
1553
1554 if (i && ((unsigned long)buf & queue_dma_alignment(
1555 STp->device->request_queue)) == 0) {
1556 i = sgl_map_user_pages(STbp, STbp->use_sg, (unsigned long)buf,
1557 count, (is_read ? READ : WRITE));
1558 if (i > 0) {
1559 STbp->do_dio = i;
1560 STbp->buffer_bytes = 0; /* can be used as transfer counter */
1561 }
1562 else
1563 STbp->do_dio = 0; /* fall back to buffering with any error */
1564 STbp->sg_segs = STbp->do_dio;
1565 DEB(
1566 if (STbp->do_dio) {
1567 STp->nbr_dio++;
1568 STp->nbr_pages += STbp->do_dio;
1569 }
1570 )
1571 } else
1572 STbp->do_dio = 0;
1573 DEB( STp->nbr_requests++; )
1574
1575 if (!STbp->do_dio) {
1576 if (STp->block_size)
1577 bufsize = STp->block_size > st_fixed_buffer_size ?
1578 STp->block_size : st_fixed_buffer_size;
1579 else {
1580 bufsize = count;
1581 /* Make sure that data from previous user is not leaked even if
1582 HBA does not return correct residual */
1583 if (is_read && STp->sili && !STbp->cleared)
1584 clear_buffer(STbp);
1585 }
1586
1587 if (bufsize > STbp->buffer_size &&
1588 !enlarge_buffer(STbp, bufsize)) {
1589 st_printk(KERN_WARNING, STp,
1590 "Can't allocate %d byte tape buffer.\n",
1591 bufsize);
1592 retval = (-EOVERFLOW);
1593 goto out;
1594 }
1595 if (STp->block_size)
1596 STbp->buffer_blocks = bufsize / STp->block_size;
1597 }
1598
1599 out:
1600 return retval;
1601 }
1602
1603
1604 /* Can be called more than once after each setup_buffer() */
release_buffering(struct scsi_tape * STp,int is_read)1605 static void release_buffering(struct scsi_tape *STp, int is_read)
1606 {
1607 struct st_buffer *STbp;
1608
1609 STbp = STp->buffer;
1610 if (STbp->do_dio) {
1611 sgl_unmap_user_pages(STbp, STbp->do_dio, is_read);
1612 STbp->do_dio = 0;
1613 STbp->sg_segs = 0;
1614 }
1615 }
1616
1617
1618 /* Write command */
1619 static ssize_t
st_write(struct file * filp,const char __user * buf,size_t count,loff_t * ppos)1620 st_write(struct file *filp, const char __user *buf, size_t count, loff_t * ppos)
1621 {
1622 ssize_t total;
1623 ssize_t i, do_count, blks, transfer;
1624 ssize_t retval;
1625 int undone, retry_eot = 0, scode;
1626 int async_write;
1627 unsigned char cmd[MAX_COMMAND_SIZE];
1628 const char __user *b_point;
1629 struct st_request *SRpnt = NULL;
1630 struct scsi_tape *STp = filp->private_data;
1631 struct st_modedef *STm;
1632 struct st_partstat *STps;
1633 struct st_buffer *STbp;
1634
1635 if (mutex_lock_interruptible(&STp->lock))
1636 return -ERESTARTSYS;
1637
1638 retval = rw_checks(STp, filp, count);
1639 if (retval || count == 0)
1640 goto out;
1641
1642 /* Write must be integral number of blocks */
1643 if (STp->block_size != 0 && (count % STp->block_size) != 0) {
1644 st_printk(KERN_WARNING, STp,
1645 "Write not multiple of tape block size.\n");
1646 retval = (-EINVAL);
1647 goto out;
1648 }
1649
1650 STm = &(STp->modes[STp->current_mode]);
1651 STps = &(STp->ps[STp->partition]);
1652
1653 if (STp->write_prot) {
1654 retval = (-EACCES);
1655 goto out;
1656 }
1657
1658
1659 if (STps->rw == ST_READING) {
1660 retval = flush_buffer(STp, 0);
1661 if (retval)
1662 goto out;
1663 STps->rw = ST_WRITING;
1664 } else if (STps->rw != ST_WRITING &&
1665 STps->drv_file == 0 && STps->drv_block == 0) {
1666 if ((retval = set_mode_densblk(STp, STm)) < 0)
1667 goto out;
1668 if (STm->default_compression != ST_DONT_TOUCH &&
1669 !(STp->compression_changed)) {
1670 if (st_compression(STp, (STm->default_compression == ST_YES))) {
1671 st_printk(KERN_WARNING, STp,
1672 "Can't set default compression.\n");
1673 if (modes_defined) {
1674 retval = (-EINVAL);
1675 goto out;
1676 }
1677 }
1678 }
1679 }
1680
1681 STbp = STp->buffer;
1682 i = write_behind_check(STp);
1683 if (i) {
1684 if (i == -ENOSPC)
1685 STps->eof = ST_EOM_OK;
1686 else
1687 STps->eof = ST_EOM_ERROR;
1688 }
1689
1690 if (STps->eof == ST_EOM_OK) {
1691 STps->eof = ST_EOD_1; /* allow next write */
1692 retval = (-ENOSPC);
1693 goto out;
1694 }
1695 else if (STps->eof == ST_EOM_ERROR) {
1696 retval = (-EIO);
1697 goto out;
1698 }
1699
1700 /* Check the buffer readability in cases where copy_user might catch
1701 the problems after some tape movement. */
1702 if (STp->block_size != 0 &&
1703 !STbp->do_dio &&
1704 (copy_from_user(&i, buf, 1) != 0 ||
1705 copy_from_user(&i, buf + count - 1, 1) != 0)) {
1706 retval = (-EFAULT);
1707 goto out;
1708 }
1709
1710 retval = setup_buffering(STp, buf, count, 0);
1711 if (retval)
1712 goto out;
1713
1714 total = count;
1715
1716 memset(cmd, 0, MAX_COMMAND_SIZE);
1717 cmd[0] = WRITE_6;
1718 cmd[1] = (STp->block_size != 0);
1719
1720 STps->rw = ST_WRITING;
1721
1722 b_point = buf;
1723 while (count > 0 && !retry_eot) {
1724
1725 if (STbp->do_dio) {
1726 do_count = count;
1727 }
1728 else {
1729 if (STp->block_size == 0)
1730 do_count = count;
1731 else {
1732 do_count = STbp->buffer_blocks * STp->block_size -
1733 STbp->buffer_bytes;
1734 if (do_count > count)
1735 do_count = count;
1736 }
1737
1738 i = append_to_buffer(b_point, STbp, do_count);
1739 if (i) {
1740 retval = i;
1741 goto out;
1742 }
1743 }
1744 count -= do_count;
1745 b_point += do_count;
1746
1747 async_write = STp->block_size == 0 && !STbp->do_dio &&
1748 STm->do_async_writes && STps->eof < ST_EOM_OK;
1749
1750 if (STp->block_size != 0 && STm->do_buffer_writes &&
1751 !(STp->try_dio_now && try_wdio) && STps->eof < ST_EOM_OK &&
1752 STbp->buffer_bytes < STbp->buffer_size) {
1753 STp->dirty = 1;
1754 /* Don't write a buffer that is not full enough. */
1755 if (!async_write && count == 0)
1756 break;
1757 }
1758
1759 retry_write:
1760 if (STp->block_size == 0)
1761 blks = transfer = do_count;
1762 else {
1763 if (!STbp->do_dio)
1764 blks = STbp->buffer_bytes;
1765 else
1766 blks = do_count;
1767 blks /= STp->block_size;
1768 transfer = blks * STp->block_size;
1769 }
1770 cmd[2] = blks >> 16;
1771 cmd[3] = blks >> 8;
1772 cmd[4] = blks;
1773
1774 SRpnt = st_do_scsi(SRpnt, STp, cmd, transfer, DMA_TO_DEVICE,
1775 STp->device->request_queue->rq_timeout,
1776 MAX_WRITE_RETRIES, !async_write);
1777 if (!SRpnt) {
1778 retval = STbp->syscall_result;
1779 goto out;
1780 }
1781 if (async_write && !STbp->syscall_result) {
1782 STbp->writing = transfer;
1783 STp->dirty = !(STbp->writing ==
1784 STbp->buffer_bytes);
1785 SRpnt = NULL; /* Prevent releasing this request! */
1786 DEB( STp->write_pending = 1; )
1787 break;
1788 }
1789
1790 if (STbp->syscall_result != 0) {
1791 struct st_cmdstatus *cmdstatp = &STp->buffer->cmdstat;
1792
1793 DEBC_printk(STp, "Error on write:\n");
1794 if (cmdstatp->have_sense && (cmdstatp->flags & SENSE_EOM)) {
1795 scode = cmdstatp->sense_hdr.sense_key;
1796 if (cmdstatp->remainder_valid)
1797 undone = (int)cmdstatp->uremainder64;
1798 else if (STp->block_size == 0 &&
1799 scode == VOLUME_OVERFLOW)
1800 undone = transfer;
1801 else
1802 undone = 0;
1803 if (STp->block_size != 0)
1804 undone *= STp->block_size;
1805 if (undone <= do_count) {
1806 /* Only data from this write is not written */
1807 count += undone;
1808 b_point -= undone;
1809 do_count -= undone;
1810 if (STp->block_size)
1811 blks = (transfer - undone) / STp->block_size;
1812 STps->eof = ST_EOM_OK;
1813 /* Continue in fixed block mode if all written
1814 in this request but still something left to write
1815 (retval left to zero)
1816 */
1817 if (STp->block_size == 0 ||
1818 undone > 0 || count == 0)
1819 retval = (-ENOSPC); /* EOM within current request */
1820 DEBC_printk(STp, "EOM with %d "
1821 "bytes unwritten.\n",
1822 (int)count);
1823 } else {
1824 /* EOT within data buffered earlier (possible only
1825 in fixed block mode without direct i/o) */
1826 if (!retry_eot && !cmdstatp->deferred &&
1827 (scode == NO_SENSE || scode == RECOVERED_ERROR)) {
1828 move_buffer_data(STp->buffer, transfer - undone);
1829 retry_eot = 1;
1830 if (STps->drv_block >= 0) {
1831 STps->drv_block += (transfer - undone) /
1832 STp->block_size;
1833 }
1834 STps->eof = ST_EOM_OK;
1835 DEBC_printk(STp, "Retry "
1836 "write of %d "
1837 "bytes at EOM.\n",
1838 STp->buffer->buffer_bytes);
1839 goto retry_write;
1840 }
1841 else {
1842 /* Either error within data buffered by driver or
1843 failed retry */
1844 count -= do_count;
1845 blks = do_count = 0;
1846 STps->eof = ST_EOM_ERROR;
1847 STps->drv_block = (-1); /* Too cautious? */
1848 retval = (-EIO); /* EOM for old data */
1849 DEBC_printk(STp, "EOM with "
1850 "lost data.\n");
1851 }
1852 }
1853 } else {
1854 count += do_count;
1855 STps->drv_block = (-1); /* Too cautious? */
1856 retval = STbp->syscall_result;
1857 }
1858
1859 }
1860
1861 if (STps->drv_block >= 0) {
1862 if (STp->block_size == 0)
1863 STps->drv_block += (do_count > 0);
1864 else
1865 STps->drv_block += blks;
1866 }
1867
1868 STbp->buffer_bytes = 0;
1869 STp->dirty = 0;
1870
1871 if (retval || retry_eot) {
1872 if (count < total)
1873 retval = total - count;
1874 goto out;
1875 }
1876 }
1877
1878 if (STps->eof == ST_EOD_1)
1879 STps->eof = ST_EOM_OK;
1880 else if (STps->eof != ST_EOM_OK)
1881 STps->eof = ST_NOEOF;
1882 retval = total - count;
1883
1884 out:
1885 if (SRpnt != NULL)
1886 st_release_request(SRpnt);
1887 release_buffering(STp, 0);
1888 mutex_unlock(&STp->lock);
1889
1890 return retval;
1891 }
1892
1893 /* Read data from the tape. Returns zero in the normal case, one if the
1894 eof status has changed, and the negative error code in case of a
1895 fatal error. Otherwise updates the buffer and the eof state.
1896
1897 Does release user buffer mapping if it is set.
1898 */
read_tape(struct scsi_tape * STp,long count,struct st_request ** aSRpnt)1899 static long read_tape(struct scsi_tape *STp, long count,
1900 struct st_request ** aSRpnt)
1901 {
1902 int transfer, blks, bytes;
1903 unsigned char cmd[MAX_COMMAND_SIZE];
1904 struct st_request *SRpnt;
1905 struct st_modedef *STm;
1906 struct st_partstat *STps;
1907 struct st_buffer *STbp;
1908 int retval = 0;
1909
1910 if (count == 0)
1911 return 0;
1912
1913 STm = &(STp->modes[STp->current_mode]);
1914 STps = &(STp->ps[STp->partition]);
1915 if (STps->eof == ST_FM_HIT)
1916 return 1;
1917 STbp = STp->buffer;
1918
1919 if (STp->block_size == 0)
1920 blks = bytes = count;
1921 else {
1922 if (!(STp->try_dio_now && try_rdio) && STm->do_read_ahead) {
1923 blks = (STp->buffer)->buffer_blocks;
1924 bytes = blks * STp->block_size;
1925 } else {
1926 bytes = count;
1927 if (!STbp->do_dio && bytes > (STp->buffer)->buffer_size)
1928 bytes = (STp->buffer)->buffer_size;
1929 blks = bytes / STp->block_size;
1930 bytes = blks * STp->block_size;
1931 }
1932 }
1933
1934 memset(cmd, 0, MAX_COMMAND_SIZE);
1935 cmd[0] = READ_6;
1936 cmd[1] = (STp->block_size != 0);
1937 if (!cmd[1] && STp->sili)
1938 cmd[1] |= 2;
1939 cmd[2] = blks >> 16;
1940 cmd[3] = blks >> 8;
1941 cmd[4] = blks;
1942
1943 SRpnt = *aSRpnt;
1944 SRpnt = st_do_scsi(SRpnt, STp, cmd, bytes, DMA_FROM_DEVICE,
1945 STp->device->request_queue->rq_timeout,
1946 MAX_RETRIES, 1);
1947 release_buffering(STp, 1);
1948 *aSRpnt = SRpnt;
1949 if (!SRpnt)
1950 return STbp->syscall_result;
1951
1952 STbp->read_pointer = 0;
1953 STps->at_sm = 0;
1954
1955 /* Something to check */
1956 if (STbp->syscall_result) {
1957 struct st_cmdstatus *cmdstatp = &STp->buffer->cmdstat;
1958
1959 retval = 1;
1960 DEBC_printk(STp,
1961 "Sense: %2x %2x %2x %2x %2x %2x %2x %2x\n",
1962 SRpnt->sense[0], SRpnt->sense[1],
1963 SRpnt->sense[2], SRpnt->sense[3],
1964 SRpnt->sense[4], SRpnt->sense[5],
1965 SRpnt->sense[6], SRpnt->sense[7]);
1966 if (cmdstatp->have_sense) {
1967
1968 if (cmdstatp->sense_hdr.sense_key == BLANK_CHECK)
1969 cmdstatp->flags &= 0xcf; /* No need for EOM in this case */
1970
1971 if (cmdstatp->flags != 0) { /* EOF, EOM, or ILI */
1972 /* Compute the residual count */
1973 if (cmdstatp->remainder_valid)
1974 transfer = (int)cmdstatp->uremainder64;
1975 else
1976 transfer = 0;
1977 if (cmdstatp->sense_hdr.sense_key == MEDIUM_ERROR) {
1978 if (STp->block_size == 0)
1979 transfer = bytes;
1980 /* Some drives set ILI with MEDIUM ERROR */
1981 cmdstatp->flags &= ~SENSE_ILI;
1982 }
1983
1984 if (cmdstatp->flags & SENSE_ILI) { /* ILI */
1985 if (STp->block_size == 0 &&
1986 transfer < 0) {
1987 st_printk(KERN_NOTICE, STp,
1988 "Failed to read %d "
1989 "byte block with %d "
1990 "byte transfer.\n",
1991 bytes - transfer,
1992 bytes);
1993 if (STps->drv_block >= 0)
1994 STps->drv_block += 1;
1995 STbp->buffer_bytes = 0;
1996 return (-ENOMEM);
1997 } else if (STp->block_size == 0) {
1998 STbp->buffer_bytes = bytes - transfer;
1999 } else {
2000 st_release_request(SRpnt);
2001 SRpnt = *aSRpnt = NULL;
2002 if (transfer == blks) { /* We did not get anything, error */
2003 st_printk(KERN_NOTICE, STp,
2004 "Incorrect "
2005 "block size.\n");
2006 if (STps->drv_block >= 0)
2007 STps->drv_block += blks - transfer + 1;
2008 st_int_ioctl(STp, MTBSR, 1);
2009 return (-EIO);
2010 }
2011 /* We have some data, deliver it */
2012 STbp->buffer_bytes = (blks - transfer) *
2013 STp->block_size;
2014 DEBC_printk(STp, "ILI but "
2015 "enough data "
2016 "received %ld "
2017 "%d.\n", count,
2018 STbp->buffer_bytes);
2019 if (STps->drv_block >= 0)
2020 STps->drv_block += 1;
2021 if (st_int_ioctl(STp, MTBSR, 1))
2022 return (-EIO);
2023 }
2024 } else if (cmdstatp->flags & SENSE_FMK) { /* FM overrides EOM */
2025 if (STps->eof != ST_FM_HIT)
2026 STps->eof = ST_FM_HIT;
2027 else
2028 STps->eof = ST_EOD_2;
2029 if (STp->block_size == 0)
2030 STbp->buffer_bytes = 0;
2031 else
2032 STbp->buffer_bytes =
2033 bytes - transfer * STp->block_size;
2034 DEBC_printk(STp, "EOF detected (%d "
2035 "bytes read).\n",
2036 STbp->buffer_bytes);
2037 } else if (cmdstatp->flags & SENSE_EOM) {
2038 if (STps->eof == ST_FM)
2039 STps->eof = ST_EOD_1;
2040 else
2041 STps->eof = ST_EOM_OK;
2042 if (STp->block_size == 0)
2043 STbp->buffer_bytes = bytes - transfer;
2044 else
2045 STbp->buffer_bytes =
2046 bytes - transfer * STp->block_size;
2047
2048 DEBC_printk(STp, "EOM detected (%d "
2049 "bytes read).\n",
2050 STbp->buffer_bytes);
2051 }
2052 }
2053 /* end of EOF, EOM, ILI test */
2054 else { /* nonzero sense key */
2055 DEBC_printk(STp, "Tape error while reading.\n");
2056 STps->drv_block = (-1);
2057 if (STps->eof == ST_FM &&
2058 cmdstatp->sense_hdr.sense_key == BLANK_CHECK) {
2059 DEBC_printk(STp, "Zero returned for "
2060 "first BLANK CHECK "
2061 "after EOF.\n");
2062 STps->eof = ST_EOD_2; /* First BLANK_CHECK after FM */
2063 } else /* Some other extended sense code */
2064 retval = (-EIO);
2065 }
2066
2067 if (STbp->buffer_bytes < 0) /* Caused by bogus sense data */
2068 STbp->buffer_bytes = 0;
2069 }
2070 /* End of extended sense test */
2071 else { /* Non-extended sense */
2072 retval = STbp->syscall_result;
2073 }
2074
2075 }
2076 /* End of error handling */
2077 else { /* Read successful */
2078 STbp->buffer_bytes = bytes;
2079 if (STp->sili) /* In fixed block mode residual is always zero here */
2080 STbp->buffer_bytes -= STp->buffer->cmdstat.residual;
2081 }
2082
2083 if (STps->drv_block >= 0) {
2084 if (STp->block_size == 0)
2085 STps->drv_block++;
2086 else
2087 STps->drv_block += STbp->buffer_bytes / STp->block_size;
2088 }
2089 return retval;
2090 }
2091
2092
2093 /* Read command */
2094 static ssize_t
st_read(struct file * filp,char __user * buf,size_t count,loff_t * ppos)2095 st_read(struct file *filp, char __user *buf, size_t count, loff_t * ppos)
2096 {
2097 ssize_t total;
2098 ssize_t retval = 0;
2099 ssize_t i, transfer;
2100 int special, do_dio = 0;
2101 struct st_request *SRpnt = NULL;
2102 struct scsi_tape *STp = filp->private_data;
2103 struct st_modedef *STm;
2104 struct st_partstat *STps;
2105 struct st_buffer *STbp = STp->buffer;
2106
2107 if (mutex_lock_interruptible(&STp->lock))
2108 return -ERESTARTSYS;
2109
2110 retval = rw_checks(STp, filp, count);
2111 if (retval || count == 0)
2112 goto out;
2113
2114 STm = &(STp->modes[STp->current_mode]);
2115 if (STp->block_size != 0 && (count % STp->block_size) != 0) {
2116 if (!STm->do_read_ahead) {
2117 retval = (-EINVAL); /* Read must be integral number of blocks */
2118 goto out;
2119 }
2120 STp->try_dio_now = 0; /* Direct i/o can't handle split blocks */
2121 }
2122
2123 STps = &(STp->ps[STp->partition]);
2124 if (STps->rw == ST_WRITING) {
2125 retval = flush_buffer(STp, 0);
2126 if (retval)
2127 goto out;
2128 STps->rw = ST_READING;
2129 }
2130 DEB(
2131 if (debugging && STps->eof != ST_NOEOF)
2132 st_printk(ST_DEB_MSG, STp,
2133 "EOF/EOM flag up (%d). Bytes %d\n",
2134 STps->eof, STbp->buffer_bytes);
2135 ) /* end DEB */
2136
2137 retval = setup_buffering(STp, buf, count, 1);
2138 if (retval)
2139 goto out;
2140 do_dio = STbp->do_dio;
2141
2142 if (STbp->buffer_bytes == 0 &&
2143 STps->eof >= ST_EOD_1) {
2144 if (STps->eof < ST_EOD) {
2145 STps->eof += 1;
2146 retval = 0;
2147 goto out;
2148 }
2149 retval = (-EIO); /* EOM or Blank Check */
2150 goto out;
2151 }
2152
2153 if (do_dio) {
2154 /* Check the buffer writability before any tape movement. Don't alter
2155 buffer data. */
2156 if (copy_from_user(&i, buf, 1) != 0 ||
2157 copy_to_user(buf, &i, 1) != 0 ||
2158 copy_from_user(&i, buf + count - 1, 1) != 0 ||
2159 copy_to_user(buf + count - 1, &i, 1) != 0) {
2160 retval = (-EFAULT);
2161 goto out;
2162 }
2163 }
2164
2165 STps->rw = ST_READING;
2166
2167
2168 /* Loop until enough data in buffer or a special condition found */
2169 for (total = 0, special = 0; total < count && !special;) {
2170
2171 /* Get new data if the buffer is empty */
2172 if (STbp->buffer_bytes == 0) {
2173 special = read_tape(STp, count - total, &SRpnt);
2174 if (special < 0) { /* No need to continue read */
2175 retval = special;
2176 goto out;
2177 }
2178 }
2179
2180 /* Move the data from driver buffer to user buffer */
2181 if (STbp->buffer_bytes > 0) {
2182 DEB(
2183 if (debugging && STps->eof != ST_NOEOF)
2184 st_printk(ST_DEB_MSG, STp,
2185 "EOF up (%d). Left %d, needed %d.\n",
2186 STps->eof, STbp->buffer_bytes,
2187 (int)(count - total));
2188 ) /* end DEB */
2189 transfer = STbp->buffer_bytes < count - total ?
2190 STbp->buffer_bytes : count - total;
2191 if (!do_dio) {
2192 i = from_buffer(STbp, buf, transfer);
2193 if (i) {
2194 retval = i;
2195 goto out;
2196 }
2197 }
2198 buf += transfer;
2199 total += transfer;
2200 }
2201
2202 if (STp->block_size == 0)
2203 break; /* Read only one variable length block */
2204
2205 } /* for (total = 0, special = 0;
2206 total < count && !special; ) */
2207
2208 /* Change the eof state if no data from tape or buffer */
2209 if (total == 0) {
2210 if (STps->eof == ST_FM_HIT) {
2211 STps->eof = ST_FM;
2212 STps->drv_block = 0;
2213 if (STps->drv_file >= 0)
2214 STps->drv_file++;
2215 } else if (STps->eof == ST_EOD_1) {
2216 STps->eof = ST_EOD_2;
2217 STps->drv_block = 0;
2218 if (STps->drv_file >= 0)
2219 STps->drv_file++;
2220 } else if (STps->eof == ST_EOD_2)
2221 STps->eof = ST_EOD;
2222 } else if (STps->eof == ST_FM)
2223 STps->eof = ST_NOEOF;
2224 retval = total;
2225
2226 out:
2227 if (SRpnt != NULL) {
2228 st_release_request(SRpnt);
2229 SRpnt = NULL;
2230 }
2231 if (do_dio) {
2232 release_buffering(STp, 1);
2233 STbp->buffer_bytes = 0;
2234 }
2235 mutex_unlock(&STp->lock);
2236
2237 return retval;
2238 }
2239
2240
2241
DEB(static void st_log_options (struct scsi_tape * STp,struct st_modedef * STm){ if (debugging) { st_printk(KERN_INFO, STp, "Mode %d options: buffer writes: %d, " "async writes: %d, read ahead: %d\\n", STp->current_mode, STm->do_buffer_writes, STm->do_async_writes, STm->do_read_ahead); st_printk(KERN_INFO, STp, " can bsr: %d, two FMs: %d, " "fast mteom: %d, auto lock: %d,\\n", STp->can_bsr, STp->two_fm, STp->fast_mteom, STp->do_auto_lock); st_printk(KERN_INFO, STp, " defs for wr: %d, no block limits: %d, " "partitions: %d, s2 log: %d\\n", STm->defaults_for_writes, STp->omit_blklims, STp->can_partitions, STp->scsi2_logical); st_printk(KERN_INFO, STp, " sysv: %d nowait: %d sili: %d " "nowait_filemark: %d\\n", STm->sysv, STp->immediate, STp->sili, STp->immediate_filemark); st_printk(KERN_INFO, STp, " debugging: %d\\n", debugging); } } )2242 DEB(
2243 /* Set the driver options */
2244 static void st_log_options(struct scsi_tape * STp, struct st_modedef * STm)
2245 {
2246 if (debugging) {
2247 st_printk(KERN_INFO, STp,
2248 "Mode %d options: buffer writes: %d, "
2249 "async writes: %d, read ahead: %d\n",
2250 STp->current_mode, STm->do_buffer_writes,
2251 STm->do_async_writes, STm->do_read_ahead);
2252 st_printk(KERN_INFO, STp,
2253 " can bsr: %d, two FMs: %d, "
2254 "fast mteom: %d, auto lock: %d,\n",
2255 STp->can_bsr, STp->two_fm, STp->fast_mteom,
2256 STp->do_auto_lock);
2257 st_printk(KERN_INFO, STp,
2258 " defs for wr: %d, no block limits: %d, "
2259 "partitions: %d, s2 log: %d\n",
2260 STm->defaults_for_writes, STp->omit_blklims,
2261 STp->can_partitions, STp->scsi2_logical);
2262 st_printk(KERN_INFO, STp,
2263 " sysv: %d nowait: %d sili: %d "
2264 "nowait_filemark: %d\n",
2265 STm->sysv, STp->immediate, STp->sili,
2266 STp->immediate_filemark);
2267 st_printk(KERN_INFO, STp, " debugging: %d\n", debugging);
2268 }
2269 }
2270 )
2271
2272
2273 static int st_set_options(struct scsi_tape *STp, long options)
2274 {
2275 int value;
2276 long code;
2277 struct st_modedef *STm;
2278 struct cdev *cd0, *cd1;
2279 struct device *d0, *d1;
2280
2281 STm = &(STp->modes[STp->current_mode]);
2282 if (!STm->defined) {
2283 cd0 = STm->cdevs[0];
2284 cd1 = STm->cdevs[1];
2285 d0 = STm->devs[0];
2286 d1 = STm->devs[1];
2287 memcpy(STm, &(STp->modes[0]), sizeof(struct st_modedef));
2288 STm->cdevs[0] = cd0;
2289 STm->cdevs[1] = cd1;
2290 STm->devs[0] = d0;
2291 STm->devs[1] = d1;
2292 modes_defined = 1;
2293 DEBC_printk(STp, "Initialized mode %d definition from mode 0\n",
2294 STp->current_mode);
2295 }
2296
2297 code = options & MT_ST_OPTIONS;
2298 if (code == MT_ST_BOOLEANS) {
2299 STm->do_buffer_writes = (options & MT_ST_BUFFER_WRITES) != 0;
2300 STm->do_async_writes = (options & MT_ST_ASYNC_WRITES) != 0;
2301 STm->defaults_for_writes = (options & MT_ST_DEF_WRITES) != 0;
2302 STm->do_read_ahead = (options & MT_ST_READ_AHEAD) != 0;
2303 STp->two_fm = (options & MT_ST_TWO_FM) != 0;
2304 STp->fast_mteom = (options & MT_ST_FAST_MTEOM) != 0;
2305 STp->do_auto_lock = (options & MT_ST_AUTO_LOCK) != 0;
2306 STp->can_bsr = (options & MT_ST_CAN_BSR) != 0;
2307 STp->omit_blklims = (options & MT_ST_NO_BLKLIMS) != 0;
2308 if ((STp->device)->scsi_level >= SCSI_2)
2309 STp->can_partitions = (options & MT_ST_CAN_PARTITIONS) != 0;
2310 STp->scsi2_logical = (options & MT_ST_SCSI2LOGICAL) != 0;
2311 STp->immediate = (options & MT_ST_NOWAIT) != 0;
2312 STp->immediate_filemark = (options & MT_ST_NOWAIT_EOF) != 0;
2313 STm->sysv = (options & MT_ST_SYSV) != 0;
2314 STp->sili = (options & MT_ST_SILI) != 0;
2315 DEB( debugging = (options & MT_ST_DEBUGGING) != 0;
2316 st_log_options(STp, STm); )
2317 } else if (code == MT_ST_SETBOOLEANS || code == MT_ST_CLEARBOOLEANS) {
2318 value = (code == MT_ST_SETBOOLEANS);
2319 if ((options & MT_ST_BUFFER_WRITES) != 0)
2320 STm->do_buffer_writes = value;
2321 if ((options & MT_ST_ASYNC_WRITES) != 0)
2322 STm->do_async_writes = value;
2323 if ((options & MT_ST_DEF_WRITES) != 0)
2324 STm->defaults_for_writes = value;
2325 if ((options & MT_ST_READ_AHEAD) != 0)
2326 STm->do_read_ahead = value;
2327 if ((options & MT_ST_TWO_FM) != 0)
2328 STp->two_fm = value;
2329 if ((options & MT_ST_FAST_MTEOM) != 0)
2330 STp->fast_mteom = value;
2331 if ((options & MT_ST_AUTO_LOCK) != 0)
2332 STp->do_auto_lock = value;
2333 if ((options & MT_ST_CAN_BSR) != 0)
2334 STp->can_bsr = value;
2335 if ((options & MT_ST_NO_BLKLIMS) != 0)
2336 STp->omit_blklims = value;
2337 if ((STp->device)->scsi_level >= SCSI_2 &&
2338 (options & MT_ST_CAN_PARTITIONS) != 0)
2339 STp->can_partitions = value;
2340 if ((options & MT_ST_SCSI2LOGICAL) != 0)
2341 STp->scsi2_logical = value;
2342 if ((options & MT_ST_NOWAIT) != 0)
2343 STp->immediate = value;
2344 if ((options & MT_ST_NOWAIT_EOF) != 0)
2345 STp->immediate_filemark = value;
2346 if ((options & MT_ST_SYSV) != 0)
2347 STm->sysv = value;
2348 if ((options & MT_ST_SILI) != 0)
2349 STp->sili = value;
2350 DEB(
2351 if ((options & MT_ST_DEBUGGING) != 0)
2352 debugging = value;
2353 st_log_options(STp, STm); )
2354 } else if (code == MT_ST_WRITE_THRESHOLD) {
2355 /* Retained for compatibility */
2356 } else if (code == MT_ST_DEF_BLKSIZE) {
2357 value = (options & ~MT_ST_OPTIONS);
2358 if (value == ~MT_ST_OPTIONS) {
2359 STm->default_blksize = (-1);
2360 DEBC_printk(STp, "Default block size disabled.\n");
2361 } else {
2362 STm->default_blksize = value;
2363 DEBC_printk(STp,"Default block size set to "
2364 "%d bytes.\n", STm->default_blksize);
2365 if (STp->ready == ST_READY) {
2366 STp->blksize_changed = 0;
2367 set_mode_densblk(STp, STm);
2368 }
2369 }
2370 } else if (code == MT_ST_TIMEOUTS) {
2371 value = (options & ~MT_ST_OPTIONS);
2372 if ((value & MT_ST_SET_LONG_TIMEOUT) != 0) {
2373 STp->long_timeout = (value & ~MT_ST_SET_LONG_TIMEOUT) * HZ;
2374 DEBC_printk(STp, "Long timeout set to %d seconds.\n",
2375 (value & ~MT_ST_SET_LONG_TIMEOUT));
2376 } else {
2377 blk_queue_rq_timeout(STp->device->request_queue,
2378 value * HZ);
2379 DEBC_printk(STp, "Normal timeout set to %d seconds.\n",
2380 value);
2381 }
2382 } else if (code == MT_ST_SET_CLN) {
2383 value = (options & ~MT_ST_OPTIONS) & 0xff;
2384 if (value != 0 &&
2385 (value < EXTENDED_SENSE_START ||
2386 value >= SCSI_SENSE_BUFFERSIZE))
2387 return (-EINVAL);
2388 STp->cln_mode = value;
2389 STp->cln_sense_mask = (options >> 8) & 0xff;
2390 STp->cln_sense_value = (options >> 16) & 0xff;
2391 st_printk(KERN_INFO, STp,
2392 "Cleaning request mode %d, mask %02x, value %02x\n",
2393 value, STp->cln_sense_mask, STp->cln_sense_value);
2394 } else if (code == MT_ST_DEF_OPTIONS) {
2395 code = (options & ~MT_ST_CLEAR_DEFAULT);
2396 value = (options & MT_ST_CLEAR_DEFAULT);
2397 if (code == MT_ST_DEF_DENSITY) {
2398 if (value == MT_ST_CLEAR_DEFAULT) {
2399 STm->default_density = (-1);
2400 DEBC_printk(STp,
2401 "Density default disabled.\n");
2402 } else {
2403 STm->default_density = value & 0xff;
2404 DEBC_printk(STp, "Density default set to %x\n",
2405 STm->default_density);
2406 if (STp->ready == ST_READY) {
2407 STp->density_changed = 0;
2408 set_mode_densblk(STp, STm);
2409 }
2410 }
2411 } else if (code == MT_ST_DEF_DRVBUFFER) {
2412 if (value == MT_ST_CLEAR_DEFAULT) {
2413 STp->default_drvbuffer = 0xff;
2414 DEBC_printk(STp,
2415 "Drive buffer default disabled.\n");
2416 } else {
2417 STp->default_drvbuffer = value & 7;
2418 DEBC_printk(STp,
2419 "Drive buffer default set to %x\n",
2420 STp->default_drvbuffer);
2421 if (STp->ready == ST_READY)
2422 st_int_ioctl(STp, MTSETDRVBUFFER, STp->default_drvbuffer);
2423 }
2424 } else if (code == MT_ST_DEF_COMPRESSION) {
2425 if (value == MT_ST_CLEAR_DEFAULT) {
2426 STm->default_compression = ST_DONT_TOUCH;
2427 DEBC_printk(STp,
2428 "Compression default disabled.\n");
2429 } else {
2430 if ((value & 0xff00) != 0) {
2431 STp->c_algo = (value & 0xff00) >> 8;
2432 DEBC_printk(STp, "Compression "
2433 "algorithm set to 0x%x.\n",
2434 STp->c_algo);
2435 }
2436 if ((value & 0xff) != 0xff) {
2437 STm->default_compression = (value & 1 ? ST_YES : ST_NO);
2438 DEBC_printk(STp, "Compression default "
2439 "set to %x\n",
2440 (value & 1));
2441 if (STp->ready == ST_READY) {
2442 STp->compression_changed = 0;
2443 st_compression(STp, (STm->default_compression == ST_YES));
2444 }
2445 }
2446 }
2447 }
2448 } else
2449 return (-EIO);
2450
2451 return 0;
2452 }
2453
2454 #define MODE_HEADER_LENGTH 4
2455
2456 /* Mode header and page byte offsets */
2457 #define MH_OFF_DATA_LENGTH 0
2458 #define MH_OFF_MEDIUM_TYPE 1
2459 #define MH_OFF_DEV_SPECIFIC 2
2460 #define MH_OFF_BDESCS_LENGTH 3
2461 #define MP_OFF_PAGE_NBR 0
2462 #define MP_OFF_PAGE_LENGTH 1
2463
2464 /* Mode header and page bit masks */
2465 #define MH_BIT_WP 0x80
2466 #define MP_MSK_PAGE_NBR 0x3f
2467
2468 /* Don't return block descriptors */
2469 #define MODE_SENSE_OMIT_BDESCS 0x08
2470
2471 #define MODE_SELECT_PAGE_FORMAT 0x10
2472
2473 /* Read a mode page into the tape buffer. The block descriptors are included
2474 if incl_block_descs is true. The page control is ored to the page number
2475 parameter, if necessary. */
read_mode_page(struct scsi_tape * STp,int page,int omit_block_descs)2476 static int read_mode_page(struct scsi_tape *STp, int page, int omit_block_descs)
2477 {
2478 unsigned char cmd[MAX_COMMAND_SIZE];
2479 struct st_request *SRpnt;
2480
2481 memset(cmd, 0, MAX_COMMAND_SIZE);
2482 cmd[0] = MODE_SENSE;
2483 if (omit_block_descs)
2484 cmd[1] = MODE_SENSE_OMIT_BDESCS;
2485 cmd[2] = page;
2486 cmd[4] = 255;
2487
2488 SRpnt = st_do_scsi(NULL, STp, cmd, cmd[4], DMA_FROM_DEVICE,
2489 STp->device->request_queue->rq_timeout, 0, 1);
2490 if (SRpnt == NULL)
2491 return (STp->buffer)->syscall_result;
2492
2493 st_release_request(SRpnt);
2494
2495 return STp->buffer->syscall_result;
2496 }
2497
2498
2499 /* Send the mode page in the tape buffer to the drive. Assumes that the mode data
2500 in the buffer is correctly formatted. The long timeout is used if slow is non-zero. */
write_mode_page(struct scsi_tape * STp,int page,int slow)2501 static int write_mode_page(struct scsi_tape *STp, int page, int slow)
2502 {
2503 int pgo;
2504 unsigned char cmd[MAX_COMMAND_SIZE];
2505 struct st_request *SRpnt;
2506 int timeout;
2507
2508 memset(cmd, 0, MAX_COMMAND_SIZE);
2509 cmd[0] = MODE_SELECT;
2510 cmd[1] = MODE_SELECT_PAGE_FORMAT;
2511 pgo = MODE_HEADER_LENGTH + (STp->buffer)->b_data[MH_OFF_BDESCS_LENGTH];
2512 cmd[4] = pgo + (STp->buffer)->b_data[pgo + MP_OFF_PAGE_LENGTH] + 2;
2513
2514 /* Clear reserved fields */
2515 (STp->buffer)->b_data[MH_OFF_DATA_LENGTH] = 0;
2516 (STp->buffer)->b_data[MH_OFF_MEDIUM_TYPE] = 0;
2517 (STp->buffer)->b_data[MH_OFF_DEV_SPECIFIC] &= ~MH_BIT_WP;
2518 (STp->buffer)->b_data[pgo + MP_OFF_PAGE_NBR] &= MP_MSK_PAGE_NBR;
2519
2520 timeout = slow ?
2521 STp->long_timeout : STp->device->request_queue->rq_timeout;
2522 SRpnt = st_do_scsi(NULL, STp, cmd, cmd[4], DMA_TO_DEVICE,
2523 timeout, 0, 1);
2524 if (SRpnt == NULL)
2525 return (STp->buffer)->syscall_result;
2526
2527 st_release_request(SRpnt);
2528
2529 return STp->buffer->syscall_result;
2530 }
2531
2532
2533 #define COMPRESSION_PAGE 0x0f
2534 #define COMPRESSION_PAGE_LENGTH 16
2535
2536 #define CP_OFF_DCE_DCC 2
2537 #define CP_OFF_C_ALGO 7
2538
2539 #define DCE_MASK 0x80
2540 #define DCC_MASK 0x40
2541 #define RED_MASK 0x60
2542
2543
2544 /* Control the compression with mode page 15. Algorithm not changed if zero.
2545
2546 The block descriptors are read and written because Sony SDT-7000 does not
2547 work without this (suggestion from Michael Schaefer <Michael.Schaefer@dlr.de>).
2548 Including block descriptors should not cause any harm to other drives. */
2549
st_compression(struct scsi_tape * STp,int state)2550 static int st_compression(struct scsi_tape * STp, int state)
2551 {
2552 int retval;
2553 int mpoffs; /* Offset to mode page start */
2554 unsigned char *b_data = (STp->buffer)->b_data;
2555
2556 if (STp->ready != ST_READY)
2557 return (-EIO);
2558
2559 /* Read the current page contents */
2560 retval = read_mode_page(STp, COMPRESSION_PAGE, 0);
2561 if (retval) {
2562 DEBC_printk(STp, "Compression mode page not supported.\n");
2563 return (-EIO);
2564 }
2565
2566 mpoffs = MODE_HEADER_LENGTH + b_data[MH_OFF_BDESCS_LENGTH];
2567 DEBC_printk(STp, "Compression state is %d.\n",
2568 (b_data[mpoffs + CP_OFF_DCE_DCC] & DCE_MASK ? 1 : 0));
2569
2570 /* Check if compression can be changed */
2571 if ((b_data[mpoffs + CP_OFF_DCE_DCC] & DCC_MASK) == 0) {
2572 DEBC_printk(STp, "Compression not supported.\n");
2573 return (-EIO);
2574 }
2575
2576 /* Do the change */
2577 if (state) {
2578 b_data[mpoffs + CP_OFF_DCE_DCC] |= DCE_MASK;
2579 if (STp->c_algo != 0)
2580 b_data[mpoffs + CP_OFF_C_ALGO] = STp->c_algo;
2581 }
2582 else {
2583 b_data[mpoffs + CP_OFF_DCE_DCC] &= ~DCE_MASK;
2584 if (STp->c_algo != 0)
2585 b_data[mpoffs + CP_OFF_C_ALGO] = 0; /* no compression */
2586 }
2587
2588 retval = write_mode_page(STp, COMPRESSION_PAGE, 0);
2589 if (retval) {
2590 DEBC_printk(STp, "Compression change failed.\n");
2591 return (-EIO);
2592 }
2593 DEBC_printk(STp, "Compression state changed to %d.\n", state);
2594
2595 STp->compression_changed = 1;
2596 return 0;
2597 }
2598
2599
2600 /* Process the load and unload commands (does unload if the load code is zero) */
do_load_unload(struct scsi_tape * STp,struct file * filp,int load_code)2601 static int do_load_unload(struct scsi_tape *STp, struct file *filp, int load_code)
2602 {
2603 int retval = (-EIO), timeout;
2604 unsigned char cmd[MAX_COMMAND_SIZE];
2605 struct st_partstat *STps;
2606 struct st_request *SRpnt;
2607
2608 if (STp->ready != ST_READY && !load_code) {
2609 if (STp->ready == ST_NO_TAPE)
2610 return (-ENOMEDIUM);
2611 else
2612 return (-EIO);
2613 }
2614
2615 memset(cmd, 0, MAX_COMMAND_SIZE);
2616 cmd[0] = START_STOP;
2617 if (load_code)
2618 cmd[4] |= 1;
2619 /*
2620 * If arg >= 1 && arg <= 6 Enhanced load/unload in HP C1553A
2621 */
2622 if (load_code >= 1 + MT_ST_HPLOADER_OFFSET
2623 && load_code <= 6 + MT_ST_HPLOADER_OFFSET) {
2624 DEBC_printk(STp, " Enhanced %sload slot %2d.\n",
2625 (cmd[4]) ? "" : "un",
2626 load_code - MT_ST_HPLOADER_OFFSET);
2627 cmd[3] = load_code - MT_ST_HPLOADER_OFFSET; /* MediaID field of C1553A */
2628 }
2629 if (STp->immediate) {
2630 cmd[1] = 1; /* Don't wait for completion */
2631 timeout = STp->device->request_queue->rq_timeout;
2632 }
2633 else
2634 timeout = STp->long_timeout;
2635
2636 DEBC(
2637 if (!load_code)
2638 st_printk(ST_DEB_MSG, STp, "Unloading tape.\n");
2639 else
2640 st_printk(ST_DEB_MSG, STp, "Loading tape.\n");
2641 );
2642
2643 SRpnt = st_do_scsi(NULL, STp, cmd, 0, DMA_NONE,
2644 timeout, MAX_RETRIES, 1);
2645 if (!SRpnt)
2646 return (STp->buffer)->syscall_result;
2647
2648 retval = (STp->buffer)->syscall_result;
2649 st_release_request(SRpnt);
2650
2651 if (!retval) { /* SCSI command successful */
2652
2653 if (!load_code) {
2654 STp->rew_at_close = 0;
2655 STp->ready = ST_NO_TAPE;
2656 }
2657 else {
2658 STp->rew_at_close = STp->autorew_dev;
2659 retval = check_tape(STp, filp);
2660 if (retval > 0)
2661 retval = 0;
2662 }
2663 }
2664 else {
2665 STps = &(STp->ps[STp->partition]);
2666 STps->drv_file = STps->drv_block = (-1);
2667 }
2668
2669 return retval;
2670 }
2671
2672 #if DEBUG
2673 #define ST_DEB_FORWARD 0
2674 #define ST_DEB_BACKWARD 1
deb_space_print(struct scsi_tape * STp,int direction,char * units,unsigned char * cmd)2675 static void deb_space_print(struct scsi_tape *STp, int direction, char *units, unsigned char *cmd)
2676 {
2677 s32 sc;
2678
2679 if (!debugging)
2680 return;
2681
2682 sc = sign_extend32(get_unaligned_be24(&cmd[2]), 23);
2683 if (direction)
2684 sc = -sc;
2685 st_printk(ST_DEB_MSG, STp, "Spacing tape %s over %d %s.\n",
2686 direction ? "backward" : "forward", sc, units);
2687 }
2688 #else
2689 #define ST_DEB_FORWARD 0
2690 #define ST_DEB_BACKWARD 1
deb_space_print(struct scsi_tape * STp,int direction,char * units,unsigned char * cmd)2691 static void deb_space_print(struct scsi_tape *STp, int direction, char *units, unsigned char *cmd) {}
2692 #endif
2693
2694
2695 /* Internal ioctl function */
st_int_ioctl(struct scsi_tape * STp,unsigned int cmd_in,unsigned long arg)2696 static int st_int_ioctl(struct scsi_tape *STp, unsigned int cmd_in, unsigned long arg)
2697 {
2698 int timeout;
2699 long ltmp;
2700 int ioctl_result;
2701 int chg_eof = 1;
2702 unsigned char cmd[MAX_COMMAND_SIZE];
2703 struct st_request *SRpnt;
2704 struct st_partstat *STps;
2705 int fileno, blkno, at_sm, undone;
2706 int datalen = 0, direction = DMA_NONE;
2707
2708 WARN_ON(STp->buffer->do_dio != 0);
2709 if (STp->ready != ST_READY) {
2710 if (STp->ready == ST_NO_TAPE)
2711 return (-ENOMEDIUM);
2712 else
2713 return (-EIO);
2714 }
2715 timeout = STp->long_timeout;
2716 STps = &(STp->ps[STp->partition]);
2717 fileno = STps->drv_file;
2718 blkno = STps->drv_block;
2719 at_sm = STps->at_sm;
2720
2721 memset(cmd, 0, MAX_COMMAND_SIZE);
2722 switch (cmd_in) {
2723 case MTFSFM:
2724 chg_eof = 0; /* Changed from the FSF after this */
2725 fallthrough;
2726 case MTFSF:
2727 cmd[0] = SPACE;
2728 cmd[1] = 0x01; /* Space FileMarks */
2729 cmd[2] = (arg >> 16);
2730 cmd[3] = (arg >> 8);
2731 cmd[4] = arg;
2732 deb_space_print(STp, ST_DEB_FORWARD, "filemarks", cmd);
2733 if (fileno >= 0)
2734 fileno += arg;
2735 blkno = 0;
2736 at_sm &= (arg == 0);
2737 break;
2738 case MTBSFM:
2739 chg_eof = 0; /* Changed from the FSF after this */
2740 fallthrough;
2741 case MTBSF:
2742 cmd[0] = SPACE;
2743 cmd[1] = 0x01; /* Space FileMarks */
2744 ltmp = (-arg);
2745 cmd[2] = (ltmp >> 16);
2746 cmd[3] = (ltmp >> 8);
2747 cmd[4] = ltmp;
2748 deb_space_print(STp, ST_DEB_BACKWARD, "filemarks", cmd);
2749 if (fileno >= 0)
2750 fileno -= arg;
2751 blkno = (-1); /* We can't know the block number */
2752 at_sm &= (arg == 0);
2753 break;
2754 case MTFSR:
2755 cmd[0] = SPACE;
2756 cmd[1] = 0x00; /* Space Blocks */
2757 cmd[2] = (arg >> 16);
2758 cmd[3] = (arg >> 8);
2759 cmd[4] = arg;
2760 deb_space_print(STp, ST_DEB_FORWARD, "blocks", cmd);
2761 if (blkno >= 0)
2762 blkno += arg;
2763 at_sm &= (arg == 0);
2764 break;
2765 case MTBSR:
2766 cmd[0] = SPACE;
2767 cmd[1] = 0x00; /* Space Blocks */
2768 ltmp = (-arg);
2769 cmd[2] = (ltmp >> 16);
2770 cmd[3] = (ltmp >> 8);
2771 cmd[4] = ltmp;
2772 deb_space_print(STp, ST_DEB_BACKWARD, "blocks", cmd);
2773 if (blkno >= 0)
2774 blkno -= arg;
2775 at_sm &= (arg == 0);
2776 break;
2777 case MTFSS:
2778 cmd[0] = SPACE;
2779 cmd[1] = 0x04; /* Space Setmarks */
2780 cmd[2] = (arg >> 16);
2781 cmd[3] = (arg >> 8);
2782 cmd[4] = arg;
2783 deb_space_print(STp, ST_DEB_FORWARD, "setmarks", cmd);
2784 if (arg != 0) {
2785 blkno = fileno = (-1);
2786 at_sm = 1;
2787 }
2788 break;
2789 case MTBSS:
2790 cmd[0] = SPACE;
2791 cmd[1] = 0x04; /* Space Setmarks */
2792 ltmp = (-arg);
2793 cmd[2] = (ltmp >> 16);
2794 cmd[3] = (ltmp >> 8);
2795 cmd[4] = ltmp;
2796 deb_space_print(STp, ST_DEB_BACKWARD, "setmarks", cmd);
2797 if (arg != 0) {
2798 blkno = fileno = (-1);
2799 at_sm = 1;
2800 }
2801 break;
2802 case MTWEOF:
2803 case MTWEOFI:
2804 case MTWSM:
2805 if (STp->write_prot)
2806 return (-EACCES);
2807 cmd[0] = WRITE_FILEMARKS;
2808 if (cmd_in == MTWSM)
2809 cmd[1] = 2;
2810 if (cmd_in == MTWEOFI ||
2811 (cmd_in == MTWEOF && STp->immediate_filemark))
2812 cmd[1] |= 1;
2813 cmd[2] = (arg >> 16);
2814 cmd[3] = (arg >> 8);
2815 cmd[4] = arg;
2816 timeout = STp->device->request_queue->rq_timeout;
2817 DEBC(
2818 if (cmd_in != MTWSM)
2819 st_printk(ST_DEB_MSG, STp,
2820 "Writing %d filemarks.\n",
2821 cmd[2] * 65536 +
2822 cmd[3] * 256 +
2823 cmd[4]);
2824 else
2825 st_printk(ST_DEB_MSG, STp,
2826 "Writing %d setmarks.\n",
2827 cmd[2] * 65536 +
2828 cmd[3] * 256 +
2829 cmd[4]);
2830 )
2831 if (fileno >= 0)
2832 fileno += arg;
2833 blkno = 0;
2834 at_sm = (cmd_in == MTWSM);
2835 break;
2836 case MTREW:
2837 cmd[0] = REZERO_UNIT;
2838 if (STp->immediate) {
2839 cmd[1] = 1; /* Don't wait for completion */
2840 timeout = STp->device->request_queue->rq_timeout;
2841 }
2842 DEBC_printk(STp, "Rewinding tape.\n");
2843 fileno = blkno = at_sm = 0;
2844 break;
2845 case MTNOP:
2846 DEBC_printk(STp, "No op on tape.\n");
2847 return 0; /* Should do something ? */
2848 case MTRETEN:
2849 cmd[0] = START_STOP;
2850 if (STp->immediate) {
2851 cmd[1] = 1; /* Don't wait for completion */
2852 timeout = STp->device->request_queue->rq_timeout;
2853 }
2854 cmd[4] = 3;
2855 DEBC_printk(STp, "Retensioning tape.\n");
2856 fileno = blkno = at_sm = 0;
2857 break;
2858 case MTEOM:
2859 if (!STp->fast_mteom) {
2860 /* space to the end of tape */
2861 ioctl_result = st_int_ioctl(STp, MTFSF, 0x7fffff);
2862 fileno = STps->drv_file;
2863 if (STps->eof >= ST_EOD_1)
2864 return 0;
2865 /* The next lines would hide the number of spaced FileMarks
2866 That's why I inserted the previous lines. I had no luck
2867 with detecting EOM with FSF, so we go now to EOM.
2868 Joerg Weule */
2869 } else
2870 fileno = (-1);
2871 cmd[0] = SPACE;
2872 cmd[1] = 3;
2873 DEBC_printk(STp, "Spacing to end of recorded medium.\n");
2874 blkno = -1;
2875 at_sm = 0;
2876 break;
2877 case MTERASE:
2878 if (STp->write_prot)
2879 return (-EACCES);
2880 cmd[0] = ERASE;
2881 cmd[1] = (arg ? 1 : 0); /* Long erase with non-zero argument */
2882 if (STp->immediate) {
2883 cmd[1] |= 2; /* Don't wait for completion */
2884 timeout = STp->device->request_queue->rq_timeout;
2885 }
2886 else
2887 timeout = STp->long_timeout * 8;
2888
2889 DEBC_printk(STp, "Erasing tape.\n");
2890 fileno = blkno = at_sm = 0;
2891 break;
2892 case MTSETBLK: /* Set block length */
2893 case MTSETDENSITY: /* Set tape density */
2894 case MTSETDRVBUFFER: /* Set drive buffering */
2895 case SET_DENS_AND_BLK: /* Set density and block size */
2896 chg_eof = 0;
2897 if (STp->dirty || (STp->buffer)->buffer_bytes != 0)
2898 return (-EIO); /* Not allowed if data in buffer */
2899 if ((cmd_in == MTSETBLK || cmd_in == SET_DENS_AND_BLK) &&
2900 (arg & MT_ST_BLKSIZE_MASK) != 0 &&
2901 STp->max_block > 0 &&
2902 ((arg & MT_ST_BLKSIZE_MASK) < STp->min_block ||
2903 (arg & MT_ST_BLKSIZE_MASK) > STp->max_block)) {
2904 st_printk(KERN_WARNING, STp, "Illegal block size.\n");
2905 return (-EINVAL);
2906 }
2907 cmd[0] = MODE_SELECT;
2908 if ((STp->use_pf & USE_PF))
2909 cmd[1] = MODE_SELECT_PAGE_FORMAT;
2910 cmd[4] = datalen = 12;
2911 direction = DMA_TO_DEVICE;
2912
2913 memset((STp->buffer)->b_data, 0, 12);
2914 if (cmd_in == MTSETDRVBUFFER)
2915 (STp->buffer)->b_data[2] = (arg & 7) << 4;
2916 else
2917 (STp->buffer)->b_data[2] =
2918 STp->drv_buffer << 4;
2919 (STp->buffer)->b_data[3] = 8; /* block descriptor length */
2920 if (cmd_in == MTSETDENSITY) {
2921 (STp->buffer)->b_data[4] = arg;
2922 STp->density_changed = 1; /* At least we tried ;-) */
2923 } else if (cmd_in == SET_DENS_AND_BLK)
2924 (STp->buffer)->b_data[4] = arg >> 24;
2925 else
2926 (STp->buffer)->b_data[4] = STp->density;
2927 if (cmd_in == MTSETBLK || cmd_in == SET_DENS_AND_BLK) {
2928 ltmp = arg & MT_ST_BLKSIZE_MASK;
2929 if (cmd_in == MTSETBLK)
2930 STp->blksize_changed = 1; /* At least we tried ;-) */
2931 } else
2932 ltmp = STp->block_size;
2933 (STp->buffer)->b_data[9] = (ltmp >> 16);
2934 (STp->buffer)->b_data[10] = (ltmp >> 8);
2935 (STp->buffer)->b_data[11] = ltmp;
2936 timeout = STp->device->request_queue->rq_timeout;
2937 DEBC(
2938 if (cmd_in == MTSETBLK || cmd_in == SET_DENS_AND_BLK)
2939 st_printk(ST_DEB_MSG, STp,
2940 "Setting block size to %d bytes.\n",
2941 (STp->buffer)->b_data[9] * 65536 +
2942 (STp->buffer)->b_data[10] * 256 +
2943 (STp->buffer)->b_data[11]);
2944 if (cmd_in == MTSETDENSITY || cmd_in == SET_DENS_AND_BLK)
2945 st_printk(ST_DEB_MSG, STp,
2946 "Setting density code to %x.\n",
2947 (STp->buffer)->b_data[4]);
2948 if (cmd_in == MTSETDRVBUFFER)
2949 st_printk(ST_DEB_MSG, STp,
2950 "Setting drive buffer code to %d.\n",
2951 ((STp->buffer)->b_data[2] >> 4) & 7);
2952 )
2953 break;
2954 default:
2955 return (-ENOSYS);
2956 }
2957
2958 SRpnt = st_do_scsi(NULL, STp, cmd, datalen, direction,
2959 timeout, MAX_RETRIES, 1);
2960 if (!SRpnt)
2961 return (STp->buffer)->syscall_result;
2962
2963 ioctl_result = (STp->buffer)->syscall_result;
2964
2965 if (!ioctl_result) { /* SCSI command successful */
2966 st_release_request(SRpnt);
2967 SRpnt = NULL;
2968 STps->drv_block = blkno;
2969 STps->drv_file = fileno;
2970 STps->at_sm = at_sm;
2971
2972 if (cmd_in == MTBSFM)
2973 ioctl_result = st_int_ioctl(STp, MTFSF, 1);
2974 else if (cmd_in == MTFSFM)
2975 ioctl_result = st_int_ioctl(STp, MTBSF, 1);
2976
2977 if (cmd_in == MTSETBLK || cmd_in == SET_DENS_AND_BLK) {
2978 STp->block_size = arg & MT_ST_BLKSIZE_MASK;
2979 if (STp->block_size != 0) {
2980 (STp->buffer)->buffer_blocks =
2981 (STp->buffer)->buffer_size / STp->block_size;
2982 }
2983 (STp->buffer)->buffer_bytes = (STp->buffer)->read_pointer = 0;
2984 if (cmd_in == SET_DENS_AND_BLK)
2985 STp->density = arg >> MT_ST_DENSITY_SHIFT;
2986 } else if (cmd_in == MTSETDRVBUFFER)
2987 STp->drv_buffer = (arg & 7);
2988 else if (cmd_in == MTSETDENSITY)
2989 STp->density = arg;
2990
2991 if (cmd_in == MTEOM)
2992 STps->eof = ST_EOD;
2993 else if (cmd_in == MTFSF)
2994 STps->eof = ST_FM;
2995 else if (chg_eof)
2996 STps->eof = ST_NOEOF;
2997
2998 if (cmd_in == MTWEOF || cmd_in == MTWEOFI)
2999 STps->rw = ST_IDLE; /* prevent automatic WEOF at close */
3000 } else { /* SCSI command was not completely successful. Don't return
3001 from this block without releasing the SCSI command block! */
3002 struct st_cmdstatus *cmdstatp = &STp->buffer->cmdstat;
3003
3004 if (cmdstatp->flags & SENSE_EOM) {
3005 if (cmd_in != MTBSF && cmd_in != MTBSFM &&
3006 cmd_in != MTBSR && cmd_in != MTBSS)
3007 STps->eof = ST_EOM_OK;
3008 STps->drv_block = 0;
3009 }
3010
3011 if (cmdstatp->remainder_valid)
3012 undone = (int)cmdstatp->uremainder64;
3013 else
3014 undone = 0;
3015
3016 if ((cmd_in == MTWEOF || cmd_in == MTWEOFI) &&
3017 cmdstatp->have_sense &&
3018 (cmdstatp->flags & SENSE_EOM)) {
3019 if (cmdstatp->sense_hdr.sense_key == NO_SENSE ||
3020 cmdstatp->sense_hdr.sense_key == RECOVERED_ERROR) {
3021 ioctl_result = 0; /* EOF(s) written successfully at EOM */
3022 STps->eof = ST_NOEOF;
3023 } else { /* Writing EOF(s) failed */
3024 if (fileno >= 0)
3025 fileno -= undone;
3026 if (undone < arg)
3027 STps->eof = ST_NOEOF;
3028 }
3029 STps->drv_file = fileno;
3030 } else if ((cmd_in == MTFSF) || (cmd_in == MTFSFM)) {
3031 if (fileno >= 0)
3032 STps->drv_file = fileno - undone;
3033 else
3034 STps->drv_file = fileno;
3035 STps->drv_block = -1;
3036 STps->eof = ST_NOEOF;
3037 } else if ((cmd_in == MTBSF) || (cmd_in == MTBSFM)) {
3038 if (arg > 0 && undone < 0) /* Some drives get this wrong */
3039 undone = (-undone);
3040 if (STps->drv_file >= 0)
3041 STps->drv_file = fileno + undone;
3042 STps->drv_block = 0;
3043 STps->eof = ST_NOEOF;
3044 } else if (cmd_in == MTFSR) {
3045 if (cmdstatp->flags & SENSE_FMK) { /* Hit filemark */
3046 if (STps->drv_file >= 0)
3047 STps->drv_file++;
3048 STps->drv_block = 0;
3049 STps->eof = ST_FM;
3050 } else {
3051 if (blkno >= undone)
3052 STps->drv_block = blkno - undone;
3053 else
3054 STps->drv_block = (-1);
3055 STps->eof = ST_NOEOF;
3056 }
3057 } else if (cmd_in == MTBSR) {
3058 if (cmdstatp->flags & SENSE_FMK) { /* Hit filemark */
3059 STps->drv_file--;
3060 STps->drv_block = (-1);
3061 } else {
3062 if (arg > 0 && undone < 0) /* Some drives get this wrong */
3063 undone = (-undone);
3064 if (STps->drv_block >= 0)
3065 STps->drv_block = blkno + undone;
3066 }
3067 STps->eof = ST_NOEOF;
3068 } else if (cmd_in == MTEOM) {
3069 STps->drv_file = (-1);
3070 STps->drv_block = (-1);
3071 STps->eof = ST_EOD;
3072 } else if (cmd_in == MTSETBLK ||
3073 cmd_in == MTSETDENSITY ||
3074 cmd_in == MTSETDRVBUFFER ||
3075 cmd_in == SET_DENS_AND_BLK) {
3076 if (cmdstatp->sense_hdr.sense_key == ILLEGAL_REQUEST &&
3077 !(STp->use_pf & PF_TESTED)) {
3078 /* Try the other possible state of Page Format if not
3079 already tried */
3080 STp->use_pf = (STp->use_pf ^ USE_PF) | PF_TESTED;
3081 st_release_request(SRpnt);
3082 SRpnt = NULL;
3083 return st_int_ioctl(STp, cmd_in, arg);
3084 }
3085 } else if (chg_eof)
3086 STps->eof = ST_NOEOF;
3087
3088 if (cmdstatp->sense_hdr.sense_key == BLANK_CHECK)
3089 STps->eof = ST_EOD;
3090
3091 st_release_request(SRpnt);
3092 SRpnt = NULL;
3093 }
3094
3095 return ioctl_result;
3096 }
3097
3098
3099 /* Get the tape position. If bt == 2, arg points into a kernel space mt_loc
3100 structure. */
3101
get_location(struct scsi_tape * STp,unsigned int * block,int * partition,int logical)3102 static int get_location(struct scsi_tape *STp, unsigned int *block, int *partition,
3103 int logical)
3104 {
3105 int result;
3106 unsigned char scmd[MAX_COMMAND_SIZE];
3107 struct st_request *SRpnt;
3108
3109 if (STp->ready != ST_READY)
3110 return (-EIO);
3111
3112 memset(scmd, 0, MAX_COMMAND_SIZE);
3113 if ((STp->device)->scsi_level < SCSI_2) {
3114 scmd[0] = QFA_REQUEST_BLOCK;
3115 scmd[4] = 3;
3116 } else {
3117 scmd[0] = READ_POSITION;
3118 if (!logical && !STp->scsi2_logical)
3119 scmd[1] = 1;
3120 }
3121 SRpnt = st_do_scsi(NULL, STp, scmd, 20, DMA_FROM_DEVICE,
3122 STp->device->request_queue->rq_timeout,
3123 MAX_READY_RETRIES, 1);
3124 if (!SRpnt)
3125 return (STp->buffer)->syscall_result;
3126
3127 if ((STp->buffer)->syscall_result != 0 ||
3128 (STp->device->scsi_level >= SCSI_2 &&
3129 ((STp->buffer)->b_data[0] & 4) != 0)) {
3130 *block = *partition = 0;
3131 DEBC_printk(STp, " Can't read tape position.\n");
3132 result = (-EIO);
3133 } else {
3134 result = 0;
3135 if ((STp->device)->scsi_level < SCSI_2) {
3136 *block = ((STp->buffer)->b_data[0] << 16)
3137 + ((STp->buffer)->b_data[1] << 8)
3138 + (STp->buffer)->b_data[2];
3139 *partition = 0;
3140 } else {
3141 *block = ((STp->buffer)->b_data[4] << 24)
3142 + ((STp->buffer)->b_data[5] << 16)
3143 + ((STp->buffer)->b_data[6] << 8)
3144 + (STp->buffer)->b_data[7];
3145 *partition = (STp->buffer)->b_data[1];
3146 if (((STp->buffer)->b_data[0] & 0x80) &&
3147 (STp->buffer)->b_data[1] == 0) /* BOP of partition 0 */
3148 STp->ps[0].drv_block = STp->ps[0].drv_file = 0;
3149 }
3150 DEBC_printk(STp, "Got tape pos. blk %d part %d.\n",
3151 *block, *partition);
3152 }
3153 st_release_request(SRpnt);
3154 SRpnt = NULL;
3155
3156 return result;
3157 }
3158
3159
3160 /* Set the tape block and partition. Negative partition means that only the
3161 block should be set in vendor specific way. */
set_location(struct scsi_tape * STp,unsigned int block,int partition,int logical)3162 static int set_location(struct scsi_tape *STp, unsigned int block, int partition,
3163 int logical)
3164 {
3165 struct st_partstat *STps;
3166 int result, p;
3167 unsigned int blk;
3168 int timeout;
3169 unsigned char scmd[MAX_COMMAND_SIZE];
3170 struct st_request *SRpnt;
3171
3172 if (STp->ready != ST_READY)
3173 return (-EIO);
3174 timeout = STp->long_timeout;
3175 STps = &(STp->ps[STp->partition]);
3176
3177 DEBC_printk(STp, "Setting block to %d and partition to %d.\n",
3178 block, partition);
3179 DEB(if (partition < 0)
3180 return (-EIO); )
3181
3182 /* Update the location at the partition we are leaving */
3183 if ((!STp->can_partitions && partition != 0) ||
3184 partition >= ST_NBR_PARTITIONS)
3185 return (-EINVAL);
3186 if (partition != STp->partition) {
3187 if (get_location(STp, &blk, &p, 1))
3188 STps->last_block_valid = 0;
3189 else {
3190 STps->last_block_valid = 1;
3191 STps->last_block_visited = blk;
3192 DEBC_printk(STp, "Visited block %d for "
3193 "partition %d saved.\n",
3194 blk, STp->partition);
3195 }
3196 }
3197
3198 memset(scmd, 0, MAX_COMMAND_SIZE);
3199 if ((STp->device)->scsi_level < SCSI_2) {
3200 scmd[0] = QFA_SEEK_BLOCK;
3201 scmd[2] = (block >> 16);
3202 scmd[3] = (block >> 8);
3203 scmd[4] = block;
3204 scmd[5] = 0;
3205 } else {
3206 scmd[0] = SEEK_10;
3207 scmd[3] = (block >> 24);
3208 scmd[4] = (block >> 16);
3209 scmd[5] = (block >> 8);
3210 scmd[6] = block;
3211 if (!logical && !STp->scsi2_logical)
3212 scmd[1] = 4;
3213 if (STp->partition != partition) {
3214 scmd[1] |= 2;
3215 scmd[8] = partition;
3216 DEBC_printk(STp, "Trying to change partition "
3217 "from %d to %d\n", STp->partition,
3218 partition);
3219 }
3220 }
3221 if (STp->immediate) {
3222 scmd[1] |= 1; /* Don't wait for completion */
3223 timeout = STp->device->request_queue->rq_timeout;
3224 }
3225
3226 SRpnt = st_do_scsi(NULL, STp, scmd, 0, DMA_NONE,
3227 timeout, MAX_READY_RETRIES, 1);
3228 if (!SRpnt)
3229 return (STp->buffer)->syscall_result;
3230
3231 STps->drv_block = STps->drv_file = (-1);
3232 STps->eof = ST_NOEOF;
3233 if ((STp->buffer)->syscall_result != 0) {
3234 result = (-EIO);
3235 if (STp->can_partitions &&
3236 (STp->device)->scsi_level >= SCSI_2 &&
3237 (p = find_partition(STp)) >= 0)
3238 STp->partition = p;
3239 } else {
3240 if (STp->can_partitions) {
3241 STp->partition = partition;
3242 STps = &(STp->ps[partition]);
3243 if (!STps->last_block_valid ||
3244 STps->last_block_visited != block) {
3245 STps->at_sm = 0;
3246 STps->rw = ST_IDLE;
3247 }
3248 } else
3249 STps->at_sm = 0;
3250 if (block == 0)
3251 STps->drv_block = STps->drv_file = 0;
3252 result = 0;
3253 }
3254
3255 st_release_request(SRpnt);
3256 SRpnt = NULL;
3257
3258 return result;
3259 }
3260
3261
3262 /* Find the current partition number for the drive status. Called from open and
3263 returns either partition number of negative error code. */
find_partition(struct scsi_tape * STp)3264 static int find_partition(struct scsi_tape *STp)
3265 {
3266 int i, partition;
3267 unsigned int block;
3268
3269 if ((i = get_location(STp, &block, &partition, 1)) < 0)
3270 return i;
3271 if (partition >= ST_NBR_PARTITIONS)
3272 return (-EIO);
3273 return partition;
3274 }
3275
3276
3277 /* Change the partition if necessary */
switch_partition(struct scsi_tape * STp)3278 static int switch_partition(struct scsi_tape *STp)
3279 {
3280 struct st_partstat *STps;
3281
3282 if (STp->partition == STp->new_partition)
3283 return 0;
3284 STps = &(STp->ps[STp->new_partition]);
3285 if (!STps->last_block_valid)
3286 STps->last_block_visited = 0;
3287 return set_location(STp, STps->last_block_visited, STp->new_partition, 1);
3288 }
3289
3290 /* Functions for reading and writing the medium partition mode page. */
3291
3292 #define PART_PAGE 0x11
3293 #define PART_PAGE_FIXED_LENGTH 8
3294
3295 #define PP_OFF_MAX_ADD_PARTS 2
3296 #define PP_OFF_NBR_ADD_PARTS 3
3297 #define PP_OFF_FLAGS 4
3298 #define PP_OFF_PART_UNITS 6
3299 #define PP_OFF_RESERVED 7
3300
3301 #define PP_BIT_IDP 0x20
3302 #define PP_BIT_FDP 0x80
3303 #define PP_MSK_PSUM_MB 0x10
3304 #define PP_MSK_PSUM_UNITS 0x18
3305 #define PP_MSK_POFM 0x04
3306
3307 /* Get the number of partitions on the tape. As a side effect reads the
3308 mode page into the tape buffer. */
nbr_partitions(struct scsi_tape * STp)3309 static int nbr_partitions(struct scsi_tape *STp)
3310 {
3311 int result;
3312
3313 if (STp->ready != ST_READY)
3314 return (-EIO);
3315
3316 result = read_mode_page(STp, PART_PAGE, 1);
3317
3318 if (result) {
3319 DEBC_printk(STp, "Can't read medium partition page.\n");
3320 result = (-EIO);
3321 } else {
3322 result = (STp->buffer)->b_data[MODE_HEADER_LENGTH +
3323 PP_OFF_NBR_ADD_PARTS] + 1;
3324 DEBC_printk(STp, "Number of partitions %d.\n", result);
3325 }
3326
3327 return result;
3328 }
3329
3330
format_medium(struct scsi_tape * STp,int format)3331 static int format_medium(struct scsi_tape *STp, int format)
3332 {
3333 int result = 0;
3334 int timeout = STp->long_timeout;
3335 unsigned char scmd[MAX_COMMAND_SIZE];
3336 struct st_request *SRpnt;
3337
3338 memset(scmd, 0, MAX_COMMAND_SIZE);
3339 scmd[0] = FORMAT_UNIT;
3340 scmd[2] = format;
3341 if (STp->immediate) {
3342 scmd[1] |= 1; /* Don't wait for completion */
3343 timeout = STp->device->request_queue->rq_timeout;
3344 }
3345 DEBC_printk(STp, "Sending FORMAT MEDIUM\n");
3346 SRpnt = st_do_scsi(NULL, STp, scmd, 0, DMA_NONE,
3347 timeout, MAX_RETRIES, 1);
3348 if (!SRpnt)
3349 result = STp->buffer->syscall_result;
3350 return result;
3351 }
3352
3353
3354 /* Partition the tape into two partitions if size > 0 or one partition if
3355 size == 0.
3356
3357 The block descriptors are read and written because Sony SDT-7000 does not
3358 work without this (suggestion from Michael Schaefer <Michael.Schaefer@dlr.de>).
3359
3360 My HP C1533A drive returns only one partition size field. This is used to
3361 set the size of partition 1. There is no size field for the default partition.
3362 Michael Schaefer's Sony SDT-7000 returns two descriptors and the second is
3363 used to set the size of partition 1 (this is what the SCSI-3 standard specifies).
3364 The following algorithm is used to accommodate both drives: if the number of
3365 partition size fields is greater than the maximum number of additional partitions
3366 in the mode page, the second field is used. Otherwise the first field is used.
3367
3368 For Seagate DDS drives the page length must be 8 when no partitions is defined
3369 and 10 when 1 partition is defined (information from Eric Lee Green). This is
3370 is acceptable also to some other old drives and enforced if the first partition
3371 size field is used for the first additional partition size.
3372
3373 For drives that advertize SCSI-3 or newer, use the SSC-3 methods.
3374 */
partition_tape(struct scsi_tape * STp,int size)3375 static int partition_tape(struct scsi_tape *STp, int size)
3376 {
3377 int result;
3378 int target_partition;
3379 bool scsi3 = STp->device->scsi_level >= SCSI_3, needs_format = false;
3380 int pgo, psd_cnt, psdo;
3381 int psum = PP_MSK_PSUM_MB, units = 0;
3382 unsigned char *bp;
3383
3384 result = read_mode_page(STp, PART_PAGE, 0);
3385 if (result) {
3386 DEBC_printk(STp, "Can't read partition mode page.\n");
3387 return result;
3388 }
3389 target_partition = 1;
3390 if (size < 0) {
3391 target_partition = 0;
3392 size = -size;
3393 }
3394
3395 /* The mode page is in the buffer. Let's modify it and write it. */
3396 bp = (STp->buffer)->b_data;
3397 pgo = MODE_HEADER_LENGTH + bp[MH_OFF_BDESCS_LENGTH];
3398 DEBC_printk(STp, "Partition page length is %d bytes.\n",
3399 bp[pgo + MP_OFF_PAGE_LENGTH] + 2);
3400
3401 psd_cnt = (bp[pgo + MP_OFF_PAGE_LENGTH] + 2 - PART_PAGE_FIXED_LENGTH) / 2;
3402
3403 if (scsi3) {
3404 needs_format = (bp[pgo + PP_OFF_FLAGS] & PP_MSK_POFM) != 0;
3405 if (needs_format && size == 0) {
3406 /* No need to write the mode page when clearing
3407 * partitioning
3408 */
3409 DEBC_printk(STp, "Formatting tape with one partition.\n");
3410 result = format_medium(STp, 0);
3411 goto out;
3412 }
3413 if (needs_format) /* Leave the old value for HP DATs claiming SCSI_3 */
3414 psd_cnt = 2;
3415 if ((bp[pgo + PP_OFF_FLAGS] & PP_MSK_PSUM_UNITS) == PP_MSK_PSUM_UNITS) {
3416 /* Use units scaling for large partitions if the device
3417 * suggests it and no precision lost. Required for IBM
3418 * TS1140/50 drives that don't support MB units.
3419 */
3420 if (size >= 1000 && (size % 1000) == 0) {
3421 size /= 1000;
3422 psum = PP_MSK_PSUM_UNITS;
3423 units = 9; /* GB */
3424 }
3425 }
3426 /* Try it anyway if too large to specify in MB */
3427 if (psum == PP_MSK_PSUM_MB && size >= 65534) {
3428 size /= 1000;
3429 psum = PP_MSK_PSUM_UNITS;
3430 units = 9; /* GB */
3431 }
3432 }
3433
3434 if (size >= 65535 || /* Does not fit into two bytes */
3435 (target_partition == 0 && psd_cnt < 2)) {
3436 result = -EINVAL;
3437 goto out;
3438 }
3439
3440 psdo = pgo + PART_PAGE_FIXED_LENGTH;
3441 /* The second condition is for HP DDS which use only one partition size
3442 * descriptor
3443 */
3444 if (target_partition > 0 &&
3445 (psd_cnt > bp[pgo + PP_OFF_MAX_ADD_PARTS] ||
3446 bp[pgo + PP_OFF_MAX_ADD_PARTS] != 1)) {
3447 bp[psdo] = bp[psdo + 1] = 0xff; /* Rest to partition 0 */
3448 psdo += 2;
3449 }
3450 memset(bp + psdo, 0, bp[pgo + PP_OFF_NBR_ADD_PARTS] * 2);
3451
3452 DEBC_printk(STp, "psd_cnt %d, max.parts %d, nbr_parts %d\n",
3453 psd_cnt, bp[pgo + PP_OFF_MAX_ADD_PARTS],
3454 bp[pgo + PP_OFF_NBR_ADD_PARTS]);
3455
3456 if (size == 0) {
3457 bp[pgo + PP_OFF_NBR_ADD_PARTS] = 0;
3458 if (psd_cnt <= bp[pgo + PP_OFF_MAX_ADD_PARTS])
3459 bp[pgo + MP_OFF_PAGE_LENGTH] = 6;
3460 DEBC_printk(STp, "Formatting tape with one partition.\n");
3461 } else {
3462 bp[psdo] = (size >> 8) & 0xff;
3463 bp[psdo + 1] = size & 0xff;
3464 if (target_partition == 0)
3465 bp[psdo + 2] = bp[psdo + 3] = 0xff;
3466 bp[pgo + 3] = 1;
3467 if (bp[pgo + MP_OFF_PAGE_LENGTH] < 8)
3468 bp[pgo + MP_OFF_PAGE_LENGTH] = 8;
3469 DEBC_printk(STp,
3470 "Formatting tape with two partitions (%i = %d MB).\n",
3471 target_partition, units > 0 ? size * 1000 : size);
3472 }
3473 bp[pgo + PP_OFF_PART_UNITS] = 0;
3474 bp[pgo + PP_OFF_RESERVED] = 0;
3475 if (size != 1 || units != 0) {
3476 bp[pgo + PP_OFF_FLAGS] = PP_BIT_IDP | psum |
3477 (bp[pgo + PP_OFF_FLAGS] & 0x07);
3478 bp[pgo + PP_OFF_PART_UNITS] = units;
3479 } else
3480 bp[pgo + PP_OFF_FLAGS] = PP_BIT_FDP |
3481 (bp[pgo + PP_OFF_FLAGS] & 0x1f);
3482 bp[pgo + MP_OFF_PAGE_LENGTH] = 6 + psd_cnt * 2;
3483
3484 result = write_mode_page(STp, PART_PAGE, 1);
3485
3486 if (!result && needs_format)
3487 result = format_medium(STp, 1);
3488
3489 if (result) {
3490 st_printk(KERN_INFO, STp, "Partitioning of tape failed.\n");
3491 result = (-EIO);
3492 }
3493
3494 out:
3495 return result;
3496 }
3497
3498
3499
3500 /* The ioctl command */
st_ioctl(struct file * file,unsigned int cmd_in,unsigned long arg)3501 static long st_ioctl(struct file *file, unsigned int cmd_in, unsigned long arg)
3502 {
3503 void __user *p = (void __user *)arg;
3504 int i, cmd_nr, cmd_type, bt;
3505 int retval = 0;
3506 unsigned int blk;
3507 struct scsi_tape *STp = file->private_data;
3508 struct st_modedef *STm;
3509 struct st_partstat *STps;
3510
3511 if (mutex_lock_interruptible(&STp->lock))
3512 return -ERESTARTSYS;
3513
3514 DEB(
3515 if (debugging && !STp->in_use) {
3516 st_printk(ST_DEB_MSG, STp, "Incorrect device.\n");
3517 retval = (-EIO);
3518 goto out;
3519 } ) /* end DEB */
3520
3521 STm = &(STp->modes[STp->current_mode]);
3522 STps = &(STp->ps[STp->partition]);
3523
3524 /*
3525 * If we are in the middle of error recovery, don't let anyone
3526 * else try and use this device. Also, if error recovery fails, it
3527 * may try and take the device offline, in which case all further
3528 * access to the device is prohibited.
3529 */
3530 retval = scsi_ioctl_block_when_processing_errors(STp->device, cmd_in,
3531 file->f_flags & O_NDELAY);
3532 if (retval)
3533 goto out;
3534
3535 cmd_type = _IOC_TYPE(cmd_in);
3536 cmd_nr = _IOC_NR(cmd_in);
3537
3538 if (cmd_type == _IOC_TYPE(MTIOCTOP) && cmd_nr == _IOC_NR(MTIOCTOP)) {
3539 struct mtop mtc;
3540
3541 if (_IOC_SIZE(cmd_in) != sizeof(mtc)) {
3542 retval = (-EINVAL);
3543 goto out;
3544 }
3545
3546 i = copy_from_user(&mtc, p, sizeof(struct mtop));
3547 if (i) {
3548 retval = (-EFAULT);
3549 goto out;
3550 }
3551
3552 if (mtc.mt_op == MTSETDRVBUFFER && !capable(CAP_SYS_ADMIN)) {
3553 st_printk(KERN_WARNING, STp,
3554 "MTSETDRVBUFFER only allowed for root.\n");
3555 retval = (-EPERM);
3556 goto out;
3557 }
3558 if (!STm->defined &&
3559 (mtc.mt_op != MTSETDRVBUFFER &&
3560 (mtc.mt_count & MT_ST_OPTIONS) == 0)) {
3561 retval = (-ENXIO);
3562 goto out;
3563 }
3564
3565 if (!STp->pos_unknown) {
3566
3567 if (STps->eof == ST_FM_HIT) {
3568 if (mtc.mt_op == MTFSF || mtc.mt_op == MTFSFM ||
3569 mtc.mt_op == MTEOM) {
3570 mtc.mt_count -= 1;
3571 if (STps->drv_file >= 0)
3572 STps->drv_file += 1;
3573 } else if (mtc.mt_op == MTBSF || mtc.mt_op == MTBSFM) {
3574 mtc.mt_count += 1;
3575 if (STps->drv_file >= 0)
3576 STps->drv_file += 1;
3577 }
3578 }
3579
3580 if (mtc.mt_op == MTSEEK) {
3581 /* Old position must be restored if partition will be
3582 changed */
3583 i = !STp->can_partitions ||
3584 (STp->new_partition != STp->partition);
3585 } else {
3586 i = mtc.mt_op == MTREW || mtc.mt_op == MTOFFL ||
3587 mtc.mt_op == MTRETEN || mtc.mt_op == MTEOM ||
3588 mtc.mt_op == MTLOCK || mtc.mt_op == MTLOAD ||
3589 mtc.mt_op == MTFSF || mtc.mt_op == MTFSFM ||
3590 mtc.mt_op == MTBSF || mtc.mt_op == MTBSFM ||
3591 mtc.mt_op == MTCOMPRESSION;
3592 }
3593 i = flush_buffer(STp, i);
3594 if (i < 0) {
3595 retval = i;
3596 goto out;
3597 }
3598 if (STps->rw == ST_WRITING &&
3599 (mtc.mt_op == MTREW || mtc.mt_op == MTOFFL ||
3600 mtc.mt_op == MTSEEK ||
3601 mtc.mt_op == MTBSF || mtc.mt_op == MTBSFM)) {
3602 i = st_int_ioctl(STp, MTWEOF, 1);
3603 if (i < 0) {
3604 retval = i;
3605 goto out;
3606 }
3607 if (mtc.mt_op == MTBSF || mtc.mt_op == MTBSFM)
3608 mtc.mt_count++;
3609 STps->rw = ST_IDLE;
3610 }
3611
3612 } else {
3613 /*
3614 * If there was a bus reset, block further access
3615 * to this device. If the user wants to rewind the tape,
3616 * then reset the flag and allow access again.
3617 */
3618 if (mtc.mt_op != MTREW &&
3619 mtc.mt_op != MTOFFL &&
3620 mtc.mt_op != MTRETEN &&
3621 mtc.mt_op != MTERASE &&
3622 mtc.mt_op != MTSEEK &&
3623 mtc.mt_op != MTEOM) {
3624 retval = (-EIO);
3625 goto out;
3626 }
3627 reset_state(STp);
3628 /* remove this when the midlevel properly clears was_reset */
3629 STp->device->was_reset = 0;
3630 }
3631
3632 if (mtc.mt_op != MTNOP && mtc.mt_op != MTSETBLK &&
3633 mtc.mt_op != MTSETDENSITY && mtc.mt_op != MTWSM &&
3634 mtc.mt_op != MTSETDRVBUFFER && mtc.mt_op != MTSETPART)
3635 STps->rw = ST_IDLE; /* Prevent automatic WEOF and fsf */
3636
3637 if (mtc.mt_op == MTOFFL && STp->door_locked != ST_UNLOCKED)
3638 do_door_lock(STp, 0); /* Ignore result! */
3639
3640 if (mtc.mt_op == MTSETDRVBUFFER &&
3641 (mtc.mt_count & MT_ST_OPTIONS) != 0) {
3642 retval = st_set_options(STp, mtc.mt_count);
3643 goto out;
3644 }
3645
3646 if (mtc.mt_op == MTSETPART) {
3647 if (!STp->can_partitions ||
3648 mtc.mt_count < 0 || mtc.mt_count >= ST_NBR_PARTITIONS) {
3649 retval = (-EINVAL);
3650 goto out;
3651 }
3652 if (mtc.mt_count >= STp->nbr_partitions &&
3653 (STp->nbr_partitions = nbr_partitions(STp)) < 0) {
3654 retval = (-EIO);
3655 goto out;
3656 }
3657 if (mtc.mt_count >= STp->nbr_partitions) {
3658 retval = (-EINVAL);
3659 goto out;
3660 }
3661 STp->new_partition = mtc.mt_count;
3662 retval = 0;
3663 goto out;
3664 }
3665
3666 if (mtc.mt_op == MTMKPART) {
3667 if (!STp->can_partitions) {
3668 retval = (-EINVAL);
3669 goto out;
3670 }
3671 i = do_load_unload(STp, file, 1);
3672 if (i < 0) {
3673 retval = i;
3674 goto out;
3675 }
3676 i = partition_tape(STp, mtc.mt_count);
3677 if (i < 0) {
3678 retval = i;
3679 goto out;
3680 }
3681 for (i = 0; i < ST_NBR_PARTITIONS; i++) {
3682 STp->ps[i].rw = ST_IDLE;
3683 STp->ps[i].at_sm = 0;
3684 STp->ps[i].last_block_valid = 0;
3685 }
3686 STp->partition = STp->new_partition = 0;
3687 STp->nbr_partitions = mtc.mt_count != 0 ? 2 : 1;
3688 STps->drv_block = STps->drv_file = 0;
3689 retval = 0;
3690 goto out;
3691 }
3692
3693 if (mtc.mt_op == MTSEEK) {
3694 i = set_location(STp, mtc.mt_count, STp->new_partition, 0);
3695 if (!STp->can_partitions)
3696 STp->ps[0].rw = ST_IDLE;
3697 retval = i;
3698 goto out;
3699 }
3700
3701 if (mtc.mt_op == MTUNLOAD || mtc.mt_op == MTOFFL) {
3702 retval = do_load_unload(STp, file, 0);
3703 goto out;
3704 }
3705
3706 if (mtc.mt_op == MTLOAD) {
3707 retval = do_load_unload(STp, file, max(1, mtc.mt_count));
3708 goto out;
3709 }
3710
3711 if (mtc.mt_op == MTLOCK || mtc.mt_op == MTUNLOCK) {
3712 retval = do_door_lock(STp, (mtc.mt_op == MTLOCK));
3713 goto out;
3714 }
3715
3716 if (STp->can_partitions && STp->ready == ST_READY &&
3717 (i = switch_partition(STp)) < 0) {
3718 retval = i;
3719 goto out;
3720 }
3721
3722 if (mtc.mt_op == MTCOMPRESSION)
3723 retval = st_compression(STp, (mtc.mt_count & 1));
3724 else
3725 retval = st_int_ioctl(STp, mtc.mt_op, mtc.mt_count);
3726 goto out;
3727 }
3728 if (!STm->defined) {
3729 retval = (-ENXIO);
3730 goto out;
3731 }
3732
3733 if ((i = flush_buffer(STp, 0)) < 0) {
3734 retval = i;
3735 goto out;
3736 }
3737 if (STp->can_partitions &&
3738 (i = switch_partition(STp)) < 0) {
3739 retval = i;
3740 goto out;
3741 }
3742
3743 if (cmd_type == _IOC_TYPE(MTIOCGET) && cmd_nr == _IOC_NR(MTIOCGET)) {
3744 struct mtget mt_status;
3745
3746 if (_IOC_SIZE(cmd_in) != sizeof(struct mtget)) {
3747 retval = (-EINVAL);
3748 goto out;
3749 }
3750
3751 mt_status.mt_type = STp->tape_type;
3752 mt_status.mt_dsreg =
3753 ((STp->block_size << MT_ST_BLKSIZE_SHIFT) & MT_ST_BLKSIZE_MASK) |
3754 ((STp->density << MT_ST_DENSITY_SHIFT) & MT_ST_DENSITY_MASK);
3755 mt_status.mt_blkno = STps->drv_block;
3756 mt_status.mt_fileno = STps->drv_file;
3757 if (STp->block_size != 0) {
3758 if (STps->rw == ST_WRITING)
3759 mt_status.mt_blkno +=
3760 (STp->buffer)->buffer_bytes / STp->block_size;
3761 else if (STps->rw == ST_READING)
3762 mt_status.mt_blkno -=
3763 ((STp->buffer)->buffer_bytes +
3764 STp->block_size - 1) / STp->block_size;
3765 }
3766
3767 mt_status.mt_gstat = 0;
3768 if (STp->drv_write_prot)
3769 mt_status.mt_gstat |= GMT_WR_PROT(0xffffffff);
3770 if (mt_status.mt_blkno == 0) {
3771 if (mt_status.mt_fileno == 0)
3772 mt_status.mt_gstat |= GMT_BOT(0xffffffff);
3773 else
3774 mt_status.mt_gstat |= GMT_EOF(0xffffffff);
3775 }
3776 mt_status.mt_erreg = (STp->recover_reg << MT_ST_SOFTERR_SHIFT);
3777 mt_status.mt_resid = STp->partition;
3778 if (STps->eof == ST_EOM_OK || STps->eof == ST_EOM_ERROR)
3779 mt_status.mt_gstat |= GMT_EOT(0xffffffff);
3780 else if (STps->eof >= ST_EOM_OK)
3781 mt_status.mt_gstat |= GMT_EOD(0xffffffff);
3782 if (STp->density == 1)
3783 mt_status.mt_gstat |= GMT_D_800(0xffffffff);
3784 else if (STp->density == 2)
3785 mt_status.mt_gstat |= GMT_D_1600(0xffffffff);
3786 else if (STp->density == 3)
3787 mt_status.mt_gstat |= GMT_D_6250(0xffffffff);
3788 if (STp->ready == ST_READY)
3789 mt_status.mt_gstat |= GMT_ONLINE(0xffffffff);
3790 if (STp->ready == ST_NO_TAPE)
3791 mt_status.mt_gstat |= GMT_DR_OPEN(0xffffffff);
3792 if (STps->at_sm)
3793 mt_status.mt_gstat |= GMT_SM(0xffffffff);
3794 if (STm->do_async_writes ||
3795 (STm->do_buffer_writes && STp->block_size != 0) ||
3796 STp->drv_buffer != 0)
3797 mt_status.mt_gstat |= GMT_IM_REP_EN(0xffffffff);
3798 if (STp->cleaning_req)
3799 mt_status.mt_gstat |= GMT_CLN(0xffffffff);
3800
3801 retval = put_user_mtget(p, &mt_status);
3802 if (retval)
3803 goto out;
3804
3805 STp->recover_reg = 0; /* Clear after read */
3806 goto out;
3807 } /* End of MTIOCGET */
3808 if (cmd_type == _IOC_TYPE(MTIOCPOS) && cmd_nr == _IOC_NR(MTIOCPOS)) {
3809 struct mtpos mt_pos;
3810 if (_IOC_SIZE(cmd_in) != sizeof(struct mtpos)) {
3811 retval = (-EINVAL);
3812 goto out;
3813 }
3814 if ((i = get_location(STp, &blk, &bt, 0)) < 0) {
3815 retval = i;
3816 goto out;
3817 }
3818 mt_pos.mt_blkno = blk;
3819 retval = put_user_mtpos(p, &mt_pos);
3820 goto out;
3821 }
3822 mutex_unlock(&STp->lock);
3823
3824 switch (cmd_in) {
3825 case SG_IO:
3826 case SCSI_IOCTL_SEND_COMMAND:
3827 case CDROM_SEND_PACKET:
3828 if (!capable(CAP_SYS_RAWIO))
3829 return -EPERM;
3830 break;
3831 default:
3832 break;
3833 }
3834
3835 retval = scsi_ioctl(STp->device, file->f_mode, cmd_in, p);
3836 if (!retval && cmd_in == SCSI_IOCTL_STOP_UNIT) {
3837 /* unload */
3838 STp->rew_at_close = 0;
3839 STp->ready = ST_NO_TAPE;
3840 }
3841 return retval;
3842
3843 out:
3844 mutex_unlock(&STp->lock);
3845 return retval;
3846 }
3847
3848 #ifdef CONFIG_COMPAT
st_compat_ioctl(struct file * file,unsigned int cmd_in,unsigned long arg)3849 static long st_compat_ioctl(struct file *file, unsigned int cmd_in, unsigned long arg)
3850 {
3851 /* argument conversion is handled using put_user_mtpos/put_user_mtget */
3852 switch (cmd_in) {
3853 case MTIOCPOS32:
3854 cmd_in = MTIOCPOS;
3855 break;
3856 case MTIOCGET32:
3857 cmd_in = MTIOCGET;
3858 break;
3859 }
3860
3861 return st_ioctl(file, cmd_in, arg);
3862 }
3863 #endif
3864
3865
3866
3867 /* Try to allocate a new tape buffer. Calling function must not hold
3868 dev_arr_lock. */
new_tape_buffer(int max_sg)3869 static struct st_buffer *new_tape_buffer(int max_sg)
3870 {
3871 struct st_buffer *tb;
3872
3873 tb = kzalloc(sizeof(struct st_buffer), GFP_KERNEL);
3874 if (!tb) {
3875 printk(KERN_NOTICE "st: Can't allocate new tape buffer.\n");
3876 return NULL;
3877 }
3878 tb->frp_segs = 0;
3879 tb->use_sg = max_sg;
3880 tb->buffer_size = 0;
3881
3882 tb->reserved_pages = kcalloc(max_sg, sizeof(struct page *),
3883 GFP_KERNEL);
3884 if (!tb->reserved_pages) {
3885 kfree(tb);
3886 return NULL;
3887 }
3888
3889 return tb;
3890 }
3891
3892
3893 /* Try to allocate enough space in the tape buffer */
3894 #define ST_MAX_ORDER 6
3895
enlarge_buffer(struct st_buffer * STbuffer,int new_size)3896 static int enlarge_buffer(struct st_buffer * STbuffer, int new_size)
3897 {
3898 int segs, max_segs, b_size, order, got;
3899 gfp_t priority;
3900
3901 if (new_size <= STbuffer->buffer_size)
3902 return 1;
3903
3904 if (STbuffer->buffer_size <= PAGE_SIZE)
3905 normalize_buffer(STbuffer); /* Avoid extra segment */
3906
3907 max_segs = STbuffer->use_sg;
3908
3909 priority = GFP_KERNEL | __GFP_NOWARN;
3910
3911 if (STbuffer->cleared)
3912 priority |= __GFP_ZERO;
3913
3914 if (STbuffer->frp_segs) {
3915 order = STbuffer->reserved_page_order;
3916 b_size = PAGE_SIZE << order;
3917 } else {
3918 for (b_size = PAGE_SIZE, order = 0;
3919 order < ST_MAX_ORDER &&
3920 max_segs * (PAGE_SIZE << order) < new_size;
3921 order++, b_size *= 2)
3922 ; /* empty */
3923 STbuffer->reserved_page_order = order;
3924 }
3925 if (max_segs * (PAGE_SIZE << order) < new_size) {
3926 if (order == ST_MAX_ORDER)
3927 return 0;
3928 normalize_buffer(STbuffer);
3929 return enlarge_buffer(STbuffer, new_size);
3930 }
3931
3932 for (segs = STbuffer->frp_segs, got = STbuffer->buffer_size;
3933 segs < max_segs && got < new_size;) {
3934 struct page *page;
3935
3936 page = alloc_pages(priority, order);
3937 if (!page) {
3938 DEB(STbuffer->buffer_size = got);
3939 normalize_buffer(STbuffer);
3940 return 0;
3941 }
3942
3943 STbuffer->frp_segs += 1;
3944 got += b_size;
3945 STbuffer->buffer_size = got;
3946 STbuffer->reserved_pages[segs] = page;
3947 segs++;
3948 }
3949 STbuffer->b_data = page_address(STbuffer->reserved_pages[0]);
3950
3951 return 1;
3952 }
3953
3954
3955 /* Make sure that no data from previous user is in the internal buffer */
clear_buffer(struct st_buffer * st_bp)3956 static void clear_buffer(struct st_buffer * st_bp)
3957 {
3958 int i;
3959
3960 for (i=0; i < st_bp->frp_segs; i++)
3961 memset(page_address(st_bp->reserved_pages[i]), 0,
3962 PAGE_SIZE << st_bp->reserved_page_order);
3963 st_bp->cleared = 1;
3964 }
3965
3966
3967 /* Release the extra buffer */
normalize_buffer(struct st_buffer * STbuffer)3968 static void normalize_buffer(struct st_buffer * STbuffer)
3969 {
3970 int i, order = STbuffer->reserved_page_order;
3971
3972 for (i = 0; i < STbuffer->frp_segs; i++) {
3973 __free_pages(STbuffer->reserved_pages[i], order);
3974 STbuffer->buffer_size -= (PAGE_SIZE << order);
3975 }
3976 STbuffer->frp_segs = 0;
3977 STbuffer->sg_segs = 0;
3978 STbuffer->reserved_page_order = 0;
3979 STbuffer->map_data.offset = 0;
3980 }
3981
3982
3983 /* Move data from the user buffer to the tape buffer. Returns zero (success) or
3984 negative error code. */
append_to_buffer(const char __user * ubp,struct st_buffer * st_bp,int do_count)3985 static int append_to_buffer(const char __user *ubp, struct st_buffer * st_bp, int do_count)
3986 {
3987 int i, cnt, res, offset;
3988 int length = PAGE_SIZE << st_bp->reserved_page_order;
3989
3990 for (i = 0, offset = st_bp->buffer_bytes;
3991 i < st_bp->frp_segs && offset >= length; i++)
3992 offset -= length;
3993 if (i == st_bp->frp_segs) { /* Should never happen */
3994 printk(KERN_WARNING "st: append_to_buffer offset overflow.\n");
3995 return (-EIO);
3996 }
3997 for (; i < st_bp->frp_segs && do_count > 0; i++) {
3998 struct page *page = st_bp->reserved_pages[i];
3999 cnt = length - offset < do_count ? length - offset : do_count;
4000 res = copy_from_user(page_address(page) + offset, ubp, cnt);
4001 if (res)
4002 return (-EFAULT);
4003 do_count -= cnt;
4004 st_bp->buffer_bytes += cnt;
4005 ubp += cnt;
4006 offset = 0;
4007 }
4008 if (do_count) /* Should never happen */
4009 return (-EIO);
4010
4011 return 0;
4012 }
4013
4014
4015 /* Move data from the tape buffer to the user buffer. Returns zero (success) or
4016 negative error code. */
from_buffer(struct st_buffer * st_bp,char __user * ubp,int do_count)4017 static int from_buffer(struct st_buffer * st_bp, char __user *ubp, int do_count)
4018 {
4019 int i, cnt, res, offset;
4020 int length = PAGE_SIZE << st_bp->reserved_page_order;
4021
4022 for (i = 0, offset = st_bp->read_pointer;
4023 i < st_bp->frp_segs && offset >= length; i++)
4024 offset -= length;
4025 if (i == st_bp->frp_segs) { /* Should never happen */
4026 printk(KERN_WARNING "st: from_buffer offset overflow.\n");
4027 return (-EIO);
4028 }
4029 for (; i < st_bp->frp_segs && do_count > 0; i++) {
4030 struct page *page = st_bp->reserved_pages[i];
4031 cnt = length - offset < do_count ? length - offset : do_count;
4032 res = copy_to_user(ubp, page_address(page) + offset, cnt);
4033 if (res)
4034 return (-EFAULT);
4035 do_count -= cnt;
4036 st_bp->buffer_bytes -= cnt;
4037 st_bp->read_pointer += cnt;
4038 ubp += cnt;
4039 offset = 0;
4040 }
4041 if (do_count) /* Should never happen */
4042 return (-EIO);
4043
4044 return 0;
4045 }
4046
4047
4048 /* Move data towards start of buffer */
move_buffer_data(struct st_buffer * st_bp,int offset)4049 static void move_buffer_data(struct st_buffer * st_bp, int offset)
4050 {
4051 int src_seg, dst_seg, src_offset = 0, dst_offset;
4052 int count, total;
4053 int length = PAGE_SIZE << st_bp->reserved_page_order;
4054
4055 if (offset == 0)
4056 return;
4057
4058 total=st_bp->buffer_bytes - offset;
4059 for (src_seg=0; src_seg < st_bp->frp_segs; src_seg++) {
4060 src_offset = offset;
4061 if (src_offset < length)
4062 break;
4063 offset -= length;
4064 }
4065
4066 st_bp->buffer_bytes = st_bp->read_pointer = total;
4067 for (dst_seg=dst_offset=0; total > 0; ) {
4068 struct page *dpage = st_bp->reserved_pages[dst_seg];
4069 struct page *spage = st_bp->reserved_pages[src_seg];
4070
4071 count = min(length - dst_offset, length - src_offset);
4072 memmove(page_address(dpage) + dst_offset,
4073 page_address(spage) + src_offset, count);
4074 src_offset += count;
4075 if (src_offset >= length) {
4076 src_seg++;
4077 src_offset = 0;
4078 }
4079 dst_offset += count;
4080 if (dst_offset >= length) {
4081 dst_seg++;
4082 dst_offset = 0;
4083 }
4084 total -= count;
4085 }
4086 }
4087
4088 /* Validate the options from command line or module parameters */
validate_options(void)4089 static void validate_options(void)
4090 {
4091 if (buffer_kbs > 0)
4092 st_fixed_buffer_size = buffer_kbs * ST_KILOBYTE;
4093 if (max_sg_segs >= ST_FIRST_SG)
4094 st_max_sg_segs = max_sg_segs;
4095 }
4096
4097 #ifndef MODULE
4098 /* Set the boot options. Syntax is defined in Documenation/scsi/st.txt.
4099 */
st_setup(char * str)4100 static int __init st_setup(char *str)
4101 {
4102 int i, len, ints[5];
4103 char *stp;
4104
4105 stp = get_options(str, ARRAY_SIZE(ints), ints);
4106
4107 if (ints[0] > 0) {
4108 for (i = 0; i < ints[0] && i < ARRAY_SIZE(parms); i++)
4109 if (parms[i].val)
4110 *parms[i].val = ints[i + 1];
4111 } else {
4112 while (stp != NULL) {
4113 for (i = 0; i < ARRAY_SIZE(parms); i++) {
4114 len = strlen(parms[i].name);
4115 if (!strncmp(stp, parms[i].name, len) &&
4116 (*(stp + len) == ':' || *(stp + len) == '=')) {
4117 if (parms[i].val)
4118 *parms[i].val =
4119 simple_strtoul(stp + len + 1, NULL, 0);
4120 else
4121 printk(KERN_WARNING "st: Obsolete parameter %s\n",
4122 parms[i].name);
4123 break;
4124 }
4125 }
4126 if (i >= ARRAY_SIZE(parms))
4127 printk(KERN_WARNING "st: invalid parameter in '%s'\n",
4128 stp);
4129 stp = strchr(stp, ',');
4130 if (stp)
4131 stp++;
4132 }
4133 }
4134
4135 validate_options();
4136
4137 return 1;
4138 }
4139
4140 __setup("st=", st_setup);
4141
4142 #endif
4143
4144 static const struct file_operations st_fops =
4145 {
4146 .owner = THIS_MODULE,
4147 .read = st_read,
4148 .write = st_write,
4149 .unlocked_ioctl = st_ioctl,
4150 #ifdef CONFIG_COMPAT
4151 .compat_ioctl = st_compat_ioctl,
4152 #endif
4153 .open = st_open,
4154 .flush = st_flush,
4155 .release = st_release,
4156 .llseek = noop_llseek,
4157 };
4158
create_one_cdev(struct scsi_tape * tape,int mode,int rew)4159 static int create_one_cdev(struct scsi_tape *tape, int mode, int rew)
4160 {
4161 int i, error;
4162 dev_t cdev_devno;
4163 struct cdev *cdev;
4164 struct device *dev;
4165 struct st_modedef *STm = &(tape->modes[mode]);
4166 char name[10];
4167 int dev_num = tape->index;
4168
4169 cdev_devno = MKDEV(SCSI_TAPE_MAJOR, TAPE_MINOR(dev_num, mode, rew));
4170
4171 cdev = cdev_alloc();
4172 if (!cdev) {
4173 pr_err("st%d: out of memory. Device not attached.\n", dev_num);
4174 error = -ENOMEM;
4175 goto out;
4176 }
4177 cdev->owner = THIS_MODULE;
4178 cdev->ops = &st_fops;
4179 STm->cdevs[rew] = cdev;
4180
4181 error = cdev_add(cdev, cdev_devno, 1);
4182 if (error) {
4183 pr_err("st%d: Can't add %s-rewind mode %d\n", dev_num,
4184 rew ? "non" : "auto", mode);
4185 pr_err("st%d: Device not attached.\n", dev_num);
4186 goto out_free;
4187 }
4188
4189 i = mode << (4 - ST_NBR_MODE_BITS);
4190 snprintf(name, 10, "%s%s%s", rew ? "n" : "",
4191 tape->name, st_formats[i]);
4192
4193 dev = device_create(&st_sysfs_class, &tape->device->sdev_gendev,
4194 cdev_devno, &tape->modes[mode], "%s", name);
4195 if (IS_ERR(dev)) {
4196 pr_err("st%d: device_create failed\n", dev_num);
4197 error = PTR_ERR(dev);
4198 goto out_free;
4199 }
4200
4201 STm->devs[rew] = dev;
4202
4203 return 0;
4204 out_free:
4205 cdev_del(STm->cdevs[rew]);
4206 out:
4207 STm->cdevs[rew] = NULL;
4208 STm->devs[rew] = NULL;
4209 return error;
4210 }
4211
create_cdevs(struct scsi_tape * tape)4212 static int create_cdevs(struct scsi_tape *tape)
4213 {
4214 int mode, error;
4215 for (mode = 0; mode < ST_NBR_MODES; ++mode) {
4216 error = create_one_cdev(tape, mode, 0);
4217 if (error)
4218 return error;
4219 error = create_one_cdev(tape, mode, 1);
4220 if (error)
4221 return error;
4222 }
4223
4224 return sysfs_create_link(&tape->device->sdev_gendev.kobj,
4225 &tape->modes[0].devs[0]->kobj, "tape");
4226 }
4227
remove_cdevs(struct scsi_tape * tape)4228 static void remove_cdevs(struct scsi_tape *tape)
4229 {
4230 int mode, rew;
4231 sysfs_remove_link(&tape->device->sdev_gendev.kobj, "tape");
4232 for (mode = 0; mode < ST_NBR_MODES; mode++) {
4233 struct st_modedef *STm = &(tape->modes[mode]);
4234 for (rew = 0; rew < 2; rew++) {
4235 if (STm->cdevs[rew])
4236 cdev_del(STm->cdevs[rew]);
4237 if (STm->devs[rew])
4238 device_unregister(STm->devs[rew]);
4239 }
4240 }
4241 }
4242
st_probe(struct device * dev)4243 static int st_probe(struct device *dev)
4244 {
4245 struct scsi_device *SDp = to_scsi_device(dev);
4246 struct scsi_tape *tpnt = NULL;
4247 struct st_modedef *STm;
4248 struct st_partstat *STps;
4249 struct st_buffer *buffer;
4250 int i, error;
4251
4252 if (SDp->type != TYPE_TAPE)
4253 return -ENODEV;
4254 if (st_incompatible(SDp)) {
4255 sdev_printk(KERN_INFO, SDp,
4256 "OnStream tapes are no longer supported;\n");
4257 sdev_printk(KERN_INFO, SDp,
4258 "please mail to linux-scsi@vger.kernel.org.\n");
4259 return -ENODEV;
4260 }
4261
4262 scsi_autopm_get_device(SDp);
4263 i = queue_max_segments(SDp->request_queue);
4264 if (st_max_sg_segs < i)
4265 i = st_max_sg_segs;
4266 buffer = new_tape_buffer(i);
4267 if (buffer == NULL) {
4268 sdev_printk(KERN_ERR, SDp,
4269 "st: Can't allocate new tape buffer. "
4270 "Device not attached.\n");
4271 goto out;
4272 }
4273
4274 tpnt = kzalloc(sizeof(struct scsi_tape), GFP_KERNEL);
4275 if (tpnt == NULL) {
4276 sdev_printk(KERN_ERR, SDp,
4277 "st: Can't allocate device descriptor.\n");
4278 goto out_buffer_free;
4279 }
4280 kref_init(&tpnt->kref);
4281
4282 tpnt->device = SDp;
4283 if (SDp->scsi_level <= 2)
4284 tpnt->tape_type = MT_ISSCSI1;
4285 else
4286 tpnt->tape_type = MT_ISSCSI2;
4287
4288 tpnt->buffer = buffer;
4289 tpnt->buffer->last_SRpnt = NULL;
4290
4291 tpnt->inited = 0;
4292 tpnt->dirty = 0;
4293 tpnt->in_use = 0;
4294 tpnt->drv_buffer = 1; /* Try buffering if no mode sense */
4295 tpnt->use_pf = (SDp->scsi_level >= SCSI_2);
4296 tpnt->density = 0;
4297 tpnt->do_auto_lock = ST_AUTO_LOCK;
4298 tpnt->can_bsr = (SDp->scsi_level > 2 ? 1 : ST_IN_FILE_POS); /* BSR mandatory in SCSI3 */
4299 tpnt->can_partitions = 0;
4300 tpnt->two_fm = ST_TWO_FM;
4301 tpnt->fast_mteom = ST_FAST_MTEOM;
4302 tpnt->scsi2_logical = ST_SCSI2LOGICAL;
4303 tpnt->sili = ST_SILI;
4304 tpnt->immediate = ST_NOWAIT;
4305 tpnt->immediate_filemark = 0;
4306 tpnt->default_drvbuffer = 0xff; /* No forced buffering */
4307 tpnt->partition = 0;
4308 tpnt->new_partition = 0;
4309 tpnt->nbr_partitions = 0;
4310 blk_queue_rq_timeout(tpnt->device->request_queue, ST_TIMEOUT);
4311 tpnt->long_timeout = ST_LONG_TIMEOUT;
4312 tpnt->try_dio = try_direct_io;
4313
4314 for (i = 0; i < ST_NBR_MODES; i++) {
4315 STm = &(tpnt->modes[i]);
4316 STm->defined = 0;
4317 STm->sysv = ST_SYSV;
4318 STm->defaults_for_writes = 0;
4319 STm->do_async_writes = ST_ASYNC_WRITES;
4320 STm->do_buffer_writes = ST_BUFFER_WRITES;
4321 STm->do_read_ahead = ST_READ_AHEAD;
4322 STm->default_compression = ST_DONT_TOUCH;
4323 STm->default_blksize = (-1); /* No forced size */
4324 STm->default_density = (-1); /* No forced density */
4325 STm->tape = tpnt;
4326 }
4327
4328 for (i = 0; i < ST_NBR_PARTITIONS; i++) {
4329 STps = &(tpnt->ps[i]);
4330 STps->rw = ST_IDLE;
4331 STps->eof = ST_NOEOF;
4332 STps->at_sm = 0;
4333 STps->last_block_valid = 0;
4334 STps->drv_block = (-1);
4335 STps->drv_file = (-1);
4336 }
4337
4338 tpnt->current_mode = 0;
4339 tpnt->modes[0].defined = 1;
4340
4341 tpnt->density_changed = tpnt->compression_changed =
4342 tpnt->blksize_changed = 0;
4343 mutex_init(&tpnt->lock);
4344
4345 idr_preload(GFP_KERNEL);
4346 spin_lock(&st_index_lock);
4347 error = idr_alloc(&st_index_idr, tpnt, 0, ST_MAX_TAPES + 1, GFP_NOWAIT);
4348 spin_unlock(&st_index_lock);
4349 idr_preload_end();
4350 if (error < 0) {
4351 pr_warn("st: idr allocation failed: %d\n", error);
4352 goto out_free_tape;
4353 }
4354 tpnt->index = error;
4355 sprintf(tpnt->name, "st%d", tpnt->index);
4356 tpnt->stats = kzalloc(sizeof(struct scsi_tape_stats), GFP_KERNEL);
4357 if (tpnt->stats == NULL) {
4358 sdev_printk(KERN_ERR, SDp,
4359 "st: Can't allocate statistics.\n");
4360 goto out_idr_remove;
4361 }
4362
4363 dev_set_drvdata(dev, tpnt);
4364
4365
4366 error = create_cdevs(tpnt);
4367 if (error)
4368 goto out_remove_devs;
4369 scsi_autopm_put_device(SDp);
4370
4371 sdev_printk(KERN_NOTICE, SDp,
4372 "Attached scsi tape %s\n", tpnt->name);
4373 sdev_printk(KERN_INFO, SDp, "%s: try direct i/o: %s (alignment %d B)\n",
4374 tpnt->name, tpnt->try_dio ? "yes" : "no",
4375 queue_dma_alignment(SDp->request_queue) + 1);
4376
4377 return 0;
4378
4379 out_remove_devs:
4380 remove_cdevs(tpnt);
4381 kfree(tpnt->stats);
4382 out_idr_remove:
4383 spin_lock(&st_index_lock);
4384 idr_remove(&st_index_idr, tpnt->index);
4385 spin_unlock(&st_index_lock);
4386 out_free_tape:
4387 kfree(tpnt);
4388 out_buffer_free:
4389 kfree(buffer);
4390 out:
4391 scsi_autopm_put_device(SDp);
4392 return -ENODEV;
4393 };
4394
4395
st_remove(struct device * dev)4396 static int st_remove(struct device *dev)
4397 {
4398 struct scsi_tape *tpnt = dev_get_drvdata(dev);
4399 int index = tpnt->index;
4400
4401 scsi_autopm_get_device(to_scsi_device(dev));
4402 remove_cdevs(tpnt);
4403
4404 mutex_lock(&st_ref_mutex);
4405 kref_put(&tpnt->kref, scsi_tape_release);
4406 mutex_unlock(&st_ref_mutex);
4407 spin_lock(&st_index_lock);
4408 idr_remove(&st_index_idr, index);
4409 spin_unlock(&st_index_lock);
4410 return 0;
4411 }
4412
4413 /**
4414 * scsi_tape_release - Called to free the Scsi_Tape structure
4415 * @kref: pointer to embedded kref
4416 *
4417 * st_ref_mutex must be held entering this routine. Because it is
4418 * called on last put, you should always use the scsi_tape_get()
4419 * scsi_tape_put() helpers which manipulate the semaphore directly
4420 * and never do a direct kref_put().
4421 **/
scsi_tape_release(struct kref * kref)4422 static void scsi_tape_release(struct kref *kref)
4423 {
4424 struct scsi_tape *tpnt = to_scsi_tape(kref);
4425
4426 tpnt->device = NULL;
4427
4428 if (tpnt->buffer) {
4429 normalize_buffer(tpnt->buffer);
4430 kfree(tpnt->buffer->reserved_pages);
4431 kfree(tpnt->buffer);
4432 }
4433
4434 kfree(tpnt->stats);
4435 kfree(tpnt);
4436 return;
4437 }
4438
4439 static struct class st_sysfs_class = {
4440 .name = "scsi_tape",
4441 .dev_groups = st_dev_groups,
4442 };
4443
init_st(void)4444 static int __init init_st(void)
4445 {
4446 int err;
4447
4448 validate_options();
4449
4450 printk(KERN_INFO "st: Version %s, fixed bufsize %d, s/g segs %d\n",
4451 verstr, st_fixed_buffer_size, st_max_sg_segs);
4452
4453 debugging = (debug_flag > 0) ? debug_flag : NO_DEBUG;
4454 if (debugging) {
4455 printk(KERN_INFO "st: Debugging enabled debug_flag = %d\n",
4456 debugging);
4457 }
4458
4459 err = class_register(&st_sysfs_class);
4460 if (err) {
4461 pr_err("Unable register sysfs class for SCSI tapes\n");
4462 return err;
4463 }
4464
4465 err = register_chrdev_region(MKDEV(SCSI_TAPE_MAJOR, 0),
4466 ST_MAX_TAPE_ENTRIES, "st");
4467 if (err) {
4468 printk(KERN_ERR "Unable to get major %d for SCSI tapes\n",
4469 SCSI_TAPE_MAJOR);
4470 goto err_class;
4471 }
4472
4473 err = scsi_register_driver(&st_template.gendrv);
4474 if (err)
4475 goto err_chrdev;
4476
4477 return 0;
4478
4479 err_chrdev:
4480 unregister_chrdev_region(MKDEV(SCSI_TAPE_MAJOR, 0),
4481 ST_MAX_TAPE_ENTRIES);
4482 err_class:
4483 class_unregister(&st_sysfs_class);
4484 return err;
4485 }
4486
exit_st(void)4487 static void __exit exit_st(void)
4488 {
4489 scsi_unregister_driver(&st_template.gendrv);
4490 unregister_chrdev_region(MKDEV(SCSI_TAPE_MAJOR, 0),
4491 ST_MAX_TAPE_ENTRIES);
4492 class_unregister(&st_sysfs_class);
4493 idr_destroy(&st_index_idr);
4494 printk(KERN_INFO "st: Unloaded.\n");
4495 }
4496
4497 module_init(init_st);
4498 module_exit(exit_st);
4499
4500
4501 /* The sysfs driver interface. Read-only at the moment */
try_direct_io_show(struct device_driver * ddp,char * buf)4502 static ssize_t try_direct_io_show(struct device_driver *ddp, char *buf)
4503 {
4504 return scnprintf(buf, PAGE_SIZE, "%d\n", try_direct_io);
4505 }
4506 static DRIVER_ATTR_RO(try_direct_io);
4507
fixed_buffer_size_show(struct device_driver * ddp,char * buf)4508 static ssize_t fixed_buffer_size_show(struct device_driver *ddp, char *buf)
4509 {
4510 return scnprintf(buf, PAGE_SIZE, "%d\n", st_fixed_buffer_size);
4511 }
4512 static DRIVER_ATTR_RO(fixed_buffer_size);
4513
max_sg_segs_show(struct device_driver * ddp,char * buf)4514 static ssize_t max_sg_segs_show(struct device_driver *ddp, char *buf)
4515 {
4516 return scnprintf(buf, PAGE_SIZE, "%d\n", st_max_sg_segs);
4517 }
4518 static DRIVER_ATTR_RO(max_sg_segs);
4519
version_show(struct device_driver * ddd,char * buf)4520 static ssize_t version_show(struct device_driver *ddd, char *buf)
4521 {
4522 return scnprintf(buf, PAGE_SIZE, "[%s]\n", verstr);
4523 }
4524 static DRIVER_ATTR_RO(version);
4525
4526 #if DEBUG
debug_flag_store(struct device_driver * ddp,const char * buf,size_t count)4527 static ssize_t debug_flag_store(struct device_driver *ddp,
4528 const char *buf, size_t count)
4529 {
4530 /* We only care what the first byte of the data is the rest is unused.
4531 * if it's a '1' we turn on debug and if it's a '0' we disable it. All
4532 * other values have -EINVAL returned if they are passed in.
4533 */
4534 if (count > 0) {
4535 if (buf[0] == '0') {
4536 debugging = NO_DEBUG;
4537 return count;
4538 } else if (buf[0] == '1') {
4539 debugging = 1;
4540 return count;
4541 }
4542 }
4543 return -EINVAL;
4544 }
4545
debug_flag_show(struct device_driver * ddp,char * buf)4546 static ssize_t debug_flag_show(struct device_driver *ddp, char *buf)
4547 {
4548 return scnprintf(buf, PAGE_SIZE, "%d\n", debugging);
4549 }
4550 static DRIVER_ATTR_RW(debug_flag);
4551 #endif
4552
4553 static struct attribute *st_drv_attrs[] = {
4554 &driver_attr_try_direct_io.attr,
4555 &driver_attr_fixed_buffer_size.attr,
4556 &driver_attr_max_sg_segs.attr,
4557 &driver_attr_version.attr,
4558 #if DEBUG
4559 &driver_attr_debug_flag.attr,
4560 #endif
4561 NULL,
4562 };
4563 ATTRIBUTE_GROUPS(st_drv);
4564
4565 /* The sysfs simple class interface */
4566 static ssize_t
defined_show(struct device * dev,struct device_attribute * attr,char * buf)4567 defined_show(struct device *dev, struct device_attribute *attr, char *buf)
4568 {
4569 struct st_modedef *STm = dev_get_drvdata(dev);
4570 ssize_t l = 0;
4571
4572 l = snprintf(buf, PAGE_SIZE, "%d\n", STm->defined);
4573 return l;
4574 }
4575 static DEVICE_ATTR_RO(defined);
4576
4577 static ssize_t
default_blksize_show(struct device * dev,struct device_attribute * attr,char * buf)4578 default_blksize_show(struct device *dev, struct device_attribute *attr,
4579 char *buf)
4580 {
4581 struct st_modedef *STm = dev_get_drvdata(dev);
4582 ssize_t l = 0;
4583
4584 l = snprintf(buf, PAGE_SIZE, "%d\n", STm->default_blksize);
4585 return l;
4586 }
4587 static DEVICE_ATTR_RO(default_blksize);
4588
4589 static ssize_t
default_density_show(struct device * dev,struct device_attribute * attr,char * buf)4590 default_density_show(struct device *dev, struct device_attribute *attr,
4591 char *buf)
4592 {
4593 struct st_modedef *STm = dev_get_drvdata(dev);
4594 ssize_t l = 0;
4595 char *fmt;
4596
4597 fmt = STm->default_density >= 0 ? "0x%02x\n" : "%d\n";
4598 l = snprintf(buf, PAGE_SIZE, fmt, STm->default_density);
4599 return l;
4600 }
4601 static DEVICE_ATTR_RO(default_density);
4602
4603 static ssize_t
default_compression_show(struct device * dev,struct device_attribute * attr,char * buf)4604 default_compression_show(struct device *dev, struct device_attribute *attr,
4605 char *buf)
4606 {
4607 struct st_modedef *STm = dev_get_drvdata(dev);
4608 ssize_t l = 0;
4609
4610 l = snprintf(buf, PAGE_SIZE, "%d\n", STm->default_compression - 1);
4611 return l;
4612 }
4613 static DEVICE_ATTR_RO(default_compression);
4614
4615 static ssize_t
options_show(struct device * dev,struct device_attribute * attr,char * buf)4616 options_show(struct device *dev, struct device_attribute *attr, char *buf)
4617 {
4618 struct st_modedef *STm = dev_get_drvdata(dev);
4619 struct scsi_tape *STp = STm->tape;
4620 int options;
4621 ssize_t l = 0;
4622
4623 options = STm->do_buffer_writes ? MT_ST_BUFFER_WRITES : 0;
4624 options |= STm->do_async_writes ? MT_ST_ASYNC_WRITES : 0;
4625 options |= STm->do_read_ahead ? MT_ST_READ_AHEAD : 0;
4626 DEB( options |= debugging ? MT_ST_DEBUGGING : 0 );
4627 options |= STp->two_fm ? MT_ST_TWO_FM : 0;
4628 options |= STp->fast_mteom ? MT_ST_FAST_MTEOM : 0;
4629 options |= STm->defaults_for_writes ? MT_ST_DEF_WRITES : 0;
4630 options |= STp->can_bsr ? MT_ST_CAN_BSR : 0;
4631 options |= STp->omit_blklims ? MT_ST_NO_BLKLIMS : 0;
4632 options |= STp->can_partitions ? MT_ST_CAN_PARTITIONS : 0;
4633 options |= STp->scsi2_logical ? MT_ST_SCSI2LOGICAL : 0;
4634 options |= STm->sysv ? MT_ST_SYSV : 0;
4635 options |= STp->immediate ? MT_ST_NOWAIT : 0;
4636 options |= STp->immediate_filemark ? MT_ST_NOWAIT_EOF : 0;
4637 options |= STp->sili ? MT_ST_SILI : 0;
4638
4639 l = snprintf(buf, PAGE_SIZE, "0x%08x\n", options);
4640 return l;
4641 }
4642 static DEVICE_ATTR_RO(options);
4643
4644 /* Support for tape stats */
4645
4646 /**
4647 * read_cnt_show - return read count - count of reads made from tape drive
4648 * @dev: struct device
4649 * @attr: attribute structure
4650 * @buf: buffer to return formatted data in
4651 */
read_cnt_show(struct device * dev,struct device_attribute * attr,char * buf)4652 static ssize_t read_cnt_show(struct device *dev,
4653 struct device_attribute *attr, char *buf)
4654 {
4655 struct st_modedef *STm = dev_get_drvdata(dev);
4656
4657 return sprintf(buf, "%lld",
4658 (long long)atomic64_read(&STm->tape->stats->read_cnt));
4659 }
4660 static DEVICE_ATTR_RO(read_cnt);
4661
4662 /**
4663 * read_byte_cnt_show - return read byte count - tape drives
4664 * may use blocks less than 512 bytes this gives the raw byte count of
4665 * of data read from the tape drive.
4666 * @dev: struct device
4667 * @attr: attribute structure
4668 * @buf: buffer to return formatted data in
4669 */
read_byte_cnt_show(struct device * dev,struct device_attribute * attr,char * buf)4670 static ssize_t read_byte_cnt_show(struct device *dev,
4671 struct device_attribute *attr, char *buf)
4672 {
4673 struct st_modedef *STm = dev_get_drvdata(dev);
4674
4675 return sprintf(buf, "%lld",
4676 (long long)atomic64_read(&STm->tape->stats->read_byte_cnt));
4677 }
4678 static DEVICE_ATTR_RO(read_byte_cnt);
4679
4680 /**
4681 * read_ns_show - return read ns - overall time spent waiting on reads in ns.
4682 * @dev: struct device
4683 * @attr: attribute structure
4684 * @buf: buffer to return formatted data in
4685 */
read_ns_show(struct device * dev,struct device_attribute * attr,char * buf)4686 static ssize_t read_ns_show(struct device *dev,
4687 struct device_attribute *attr, char *buf)
4688 {
4689 struct st_modedef *STm = dev_get_drvdata(dev);
4690
4691 return sprintf(buf, "%lld",
4692 (long long)atomic64_read(&STm->tape->stats->tot_read_time));
4693 }
4694 static DEVICE_ATTR_RO(read_ns);
4695
4696 /**
4697 * write_cnt_show - write count - number of user calls
4698 * to write(2) that have written data to tape.
4699 * @dev: struct device
4700 * @attr: attribute structure
4701 * @buf: buffer to return formatted data in
4702 */
write_cnt_show(struct device * dev,struct device_attribute * attr,char * buf)4703 static ssize_t write_cnt_show(struct device *dev,
4704 struct device_attribute *attr, char *buf)
4705 {
4706 struct st_modedef *STm = dev_get_drvdata(dev);
4707
4708 return sprintf(buf, "%lld",
4709 (long long)atomic64_read(&STm->tape->stats->write_cnt));
4710 }
4711 static DEVICE_ATTR_RO(write_cnt);
4712
4713 /**
4714 * write_byte_cnt_show - write byte count - raw count of
4715 * bytes written to tape.
4716 * @dev: struct device
4717 * @attr: attribute structure
4718 * @buf: buffer to return formatted data in
4719 */
write_byte_cnt_show(struct device * dev,struct device_attribute * attr,char * buf)4720 static ssize_t write_byte_cnt_show(struct device *dev,
4721 struct device_attribute *attr, char *buf)
4722 {
4723 struct st_modedef *STm = dev_get_drvdata(dev);
4724
4725 return sprintf(buf, "%lld",
4726 (long long)atomic64_read(&STm->tape->stats->write_byte_cnt));
4727 }
4728 static DEVICE_ATTR_RO(write_byte_cnt);
4729
4730 /**
4731 * write_ns_show - write ns - number of nanoseconds waiting on write
4732 * requests to complete.
4733 * @dev: struct device
4734 * @attr: attribute structure
4735 * @buf: buffer to return formatted data in
4736 */
write_ns_show(struct device * dev,struct device_attribute * attr,char * buf)4737 static ssize_t write_ns_show(struct device *dev,
4738 struct device_attribute *attr, char *buf)
4739 {
4740 struct st_modedef *STm = dev_get_drvdata(dev);
4741
4742 return sprintf(buf, "%lld",
4743 (long long)atomic64_read(&STm->tape->stats->tot_write_time));
4744 }
4745 static DEVICE_ATTR_RO(write_ns);
4746
4747 /**
4748 * in_flight_show - number of I/Os currently in flight -
4749 * in most cases this will be either 0 or 1. It may be higher if someone
4750 * has also issued other SCSI commands such as via an ioctl.
4751 * @dev: struct device
4752 * @attr: attribute structure
4753 * @buf: buffer to return formatted data in
4754 */
in_flight_show(struct device * dev,struct device_attribute * attr,char * buf)4755 static ssize_t in_flight_show(struct device *dev,
4756 struct device_attribute *attr, char *buf)
4757 {
4758 struct st_modedef *STm = dev_get_drvdata(dev);
4759
4760 return sprintf(buf, "%lld",
4761 (long long)atomic64_read(&STm->tape->stats->in_flight));
4762 }
4763 static DEVICE_ATTR_RO(in_flight);
4764
4765 /**
4766 * io_ns_show - io wait ns - this is the number of ns spent
4767 * waiting on all I/O to complete. This includes tape movement commands
4768 * such as rewinding, seeking to end of file or tape, it also includes
4769 * read and write. To determine the time spent on tape movement
4770 * subtract the read and write ns from this value.
4771 * @dev: struct device
4772 * @attr: attribute structure
4773 * @buf: buffer to return formatted data in
4774 */
io_ns_show(struct device * dev,struct device_attribute * attr,char * buf)4775 static ssize_t io_ns_show(struct device *dev,
4776 struct device_attribute *attr, char *buf)
4777 {
4778 struct st_modedef *STm = dev_get_drvdata(dev);
4779
4780 return sprintf(buf, "%lld",
4781 (long long)atomic64_read(&STm->tape->stats->tot_io_time));
4782 }
4783 static DEVICE_ATTR_RO(io_ns);
4784
4785 /**
4786 * other_cnt_show - other io count - this is the number of
4787 * I/O requests other than read and write requests.
4788 * Typically these are tape movement requests but will include driver
4789 * tape movement. This includes only requests issued by the st driver.
4790 * @dev: struct device
4791 * @attr: attribute structure
4792 * @buf: buffer to return formatted data in
4793 */
other_cnt_show(struct device * dev,struct device_attribute * attr,char * buf)4794 static ssize_t other_cnt_show(struct device *dev,
4795 struct device_attribute *attr, char *buf)
4796 {
4797 struct st_modedef *STm = dev_get_drvdata(dev);
4798
4799 return sprintf(buf, "%lld",
4800 (long long)atomic64_read(&STm->tape->stats->other_cnt));
4801 }
4802 static DEVICE_ATTR_RO(other_cnt);
4803
4804 /**
4805 * resid_cnt_show - A count of the number of times we get a residual
4806 * count - this should indicate someone issuing reads larger than the
4807 * block size on tape.
4808 * @dev: struct device
4809 * @attr: attribute structure
4810 * @buf: buffer to return formatted data in
4811 */
resid_cnt_show(struct device * dev,struct device_attribute * attr,char * buf)4812 static ssize_t resid_cnt_show(struct device *dev,
4813 struct device_attribute *attr, char *buf)
4814 {
4815 struct st_modedef *STm = dev_get_drvdata(dev);
4816
4817 return sprintf(buf, "%lld",
4818 (long long)atomic64_read(&STm->tape->stats->resid_cnt));
4819 }
4820 static DEVICE_ATTR_RO(resid_cnt);
4821
4822 static struct attribute *st_dev_attrs[] = {
4823 &dev_attr_defined.attr,
4824 &dev_attr_default_blksize.attr,
4825 &dev_attr_default_density.attr,
4826 &dev_attr_default_compression.attr,
4827 &dev_attr_options.attr,
4828 NULL,
4829 };
4830
4831 static struct attribute *st_stats_attrs[] = {
4832 &dev_attr_read_cnt.attr,
4833 &dev_attr_read_byte_cnt.attr,
4834 &dev_attr_read_ns.attr,
4835 &dev_attr_write_cnt.attr,
4836 &dev_attr_write_byte_cnt.attr,
4837 &dev_attr_write_ns.attr,
4838 &dev_attr_in_flight.attr,
4839 &dev_attr_io_ns.attr,
4840 &dev_attr_other_cnt.attr,
4841 &dev_attr_resid_cnt.attr,
4842 NULL,
4843 };
4844
4845 static struct attribute_group stats_group = {
4846 .name = "stats",
4847 .attrs = st_stats_attrs,
4848 };
4849
4850 static struct attribute_group st_group = {
4851 .attrs = st_dev_attrs,
4852 };
4853
4854 static const struct attribute_group *st_dev_groups[] = {
4855 &st_group,
4856 &stats_group,
4857 NULL,
4858 };
4859
4860 /* The following functions may be useful for a larger audience. */
sgl_map_user_pages(struct st_buffer * STbp,const unsigned int max_pages,unsigned long uaddr,size_t count,int rw)4861 static int sgl_map_user_pages(struct st_buffer *STbp,
4862 const unsigned int max_pages, unsigned long uaddr,
4863 size_t count, int rw)
4864 {
4865 unsigned long end = (uaddr + count + PAGE_SIZE - 1) >> PAGE_SHIFT;
4866 unsigned long start = uaddr >> PAGE_SHIFT;
4867 const int nr_pages = end - start;
4868 int res, i;
4869 struct page **pages;
4870 struct rq_map_data *mdata = &STbp->map_data;
4871
4872 /* User attempted Overflow! */
4873 if ((uaddr + count) < uaddr)
4874 return -EINVAL;
4875
4876 /* Too big */
4877 if (nr_pages > max_pages)
4878 return -ENOMEM;
4879
4880 /* Hmm? */
4881 if (count == 0)
4882 return 0;
4883
4884 pages = kmalloc_array(max_pages, sizeof(*pages), GFP_KERNEL);
4885 if (pages == NULL)
4886 return -ENOMEM;
4887
4888 /* Try to fault in all of the necessary pages */
4889 /* rw==READ means read from drive, write into memory area */
4890 res = pin_user_pages_fast(uaddr, nr_pages, rw == READ ? FOLL_WRITE : 0,
4891 pages);
4892
4893 /* Errors and no page mapped should return here */
4894 if (res < nr_pages)
4895 goto out_unmap;
4896
4897 for (i=0; i < nr_pages; i++) {
4898 /* FIXME: flush superflous for rw==READ,
4899 * probably wrong function for rw==WRITE
4900 */
4901 flush_dcache_page(pages[i]);
4902 }
4903
4904 mdata->offset = uaddr & ~PAGE_MASK;
4905 STbp->mapped_pages = pages;
4906
4907 return nr_pages;
4908 out_unmap:
4909 if (res > 0) {
4910 unpin_user_pages(pages, res);
4911 res = 0;
4912 }
4913 kfree(pages);
4914 return res;
4915 }
4916
4917
4918 /* And unmap them... */
sgl_unmap_user_pages(struct st_buffer * STbp,const unsigned int nr_pages,int dirtied)4919 static int sgl_unmap_user_pages(struct st_buffer *STbp,
4920 const unsigned int nr_pages, int dirtied)
4921 {
4922 /* FIXME: cache flush missing for rw==READ */
4923 unpin_user_pages_dirty_lock(STbp->mapped_pages, nr_pages, dirtied);
4924
4925 kfree(STbp->mapped_pages);
4926 STbp->mapped_pages = NULL;
4927
4928 return 0;
4929 }
4930