1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3 * TI 3410/5052 USB Serial Driver
4 *
5 * Copyright (C) 2004 Texas Instruments
6 *
7 * This driver is based on the Linux io_ti driver, which is
8 * Copyright (C) 2000-2002 Inside Out Networks
9 * Copyright (C) 2001-2002 Greg Kroah-Hartman
10 *
11 * For questions or problems with this driver, contact Texas Instruments
12 * technical support, or Al Borchers <alborchers@steinerpoint.com>, or
13 * Peter Berger <pberger@brimson.com>.
14 */
15
16 #include <linux/kernel.h>
17 #include <linux/errno.h>
18 #include <linux/firmware.h>
19 #include <linux/slab.h>
20 #include <linux/tty.h>
21 #include <linux/tty_driver.h>
22 #include <linux/tty_flip.h>
23 #include <linux/module.h>
24 #include <linux/spinlock.h>
25 #include <linux/ioctl.h>
26 #include <linux/serial.h>
27 #include <linux/kfifo.h>
28 #include <linux/mutex.h>
29 #include <linux/uaccess.h>
30 #include <linux/usb.h>
31 #include <linux/usb/serial.h>
32
33 /* Configuration ids */
34 #define TI_BOOT_CONFIG 1
35 #define TI_ACTIVE_CONFIG 2
36
37 /* Vendor and product ids */
38 #define TI_VENDOR_ID 0x0451
39 #define IBM_VENDOR_ID 0x04b3
40 #define STARTECH_VENDOR_ID 0x14b0
41 #define TI_3410_PRODUCT_ID 0x3410
42 #define IBM_4543_PRODUCT_ID 0x4543
43 #define IBM_454B_PRODUCT_ID 0x454b
44 #define IBM_454C_PRODUCT_ID 0x454c
45 #define TI_3410_EZ430_ID 0xF430 /* TI ez430 development tool */
46 #define TI_5052_BOOT_PRODUCT_ID 0x5052 /* no EEPROM, no firmware */
47 #define TI_5152_BOOT_PRODUCT_ID 0x5152 /* no EEPROM, no firmware */
48 #define TI_5052_EEPROM_PRODUCT_ID 0x505A /* EEPROM, no firmware */
49 #define TI_5052_FIRMWARE_PRODUCT_ID 0x505F /* firmware is running */
50 #define FRI2_PRODUCT_ID 0x5053 /* Fish River Island II */
51
52 /* Multi-Tech vendor and product ids */
53 #define MTS_VENDOR_ID 0x06E0
54 #define MTS_GSM_NO_FW_PRODUCT_ID 0xF108
55 #define MTS_CDMA_NO_FW_PRODUCT_ID 0xF109
56 #define MTS_CDMA_PRODUCT_ID 0xF110
57 #define MTS_GSM_PRODUCT_ID 0xF111
58 #define MTS_EDGE_PRODUCT_ID 0xF112
59 #define MTS_MT9234MU_PRODUCT_ID 0xF114
60 #define MTS_MT9234ZBA_PRODUCT_ID 0xF115
61 #define MTS_MT9234ZBAOLD_PRODUCT_ID 0x0319
62
63 /* Abbott Diabetics vendor and product ids */
64 #define ABBOTT_VENDOR_ID 0x1a61
65 #define ABBOTT_STEREO_PLUG_ID 0x3410
66 #define ABBOTT_PRODUCT_ID ABBOTT_STEREO_PLUG_ID
67 #define ABBOTT_STRIP_PORT_ID 0x3420
68
69 /* Honeywell vendor and product IDs */
70 #define HONEYWELL_VENDOR_ID 0x10ac
71 #define HONEYWELL_HGI80_PRODUCT_ID 0x0102 /* Honeywell HGI80 */
72
73 /* Moxa UPORT 11x0 vendor and product IDs */
74 #define MXU1_VENDOR_ID 0x110a
75 #define MXU1_1110_PRODUCT_ID 0x1110
76 #define MXU1_1130_PRODUCT_ID 0x1130
77 #define MXU1_1150_PRODUCT_ID 0x1150
78 #define MXU1_1151_PRODUCT_ID 0x1151
79 #define MXU1_1131_PRODUCT_ID 0x1131
80
81 /* Commands */
82 #define TI_GET_VERSION 0x01
83 #define TI_GET_PORT_STATUS 0x02
84 #define TI_GET_PORT_DEV_INFO 0x03
85 #define TI_GET_CONFIG 0x04
86 #define TI_SET_CONFIG 0x05
87 #define TI_OPEN_PORT 0x06
88 #define TI_CLOSE_PORT 0x07
89 #define TI_START_PORT 0x08
90 #define TI_STOP_PORT 0x09
91 #define TI_TEST_PORT 0x0A
92 #define TI_PURGE_PORT 0x0B
93 #define TI_RESET_EXT_DEVICE 0x0C
94 #define TI_WRITE_DATA 0x80
95 #define TI_READ_DATA 0x81
96 #define TI_REQ_TYPE_CLASS 0x82
97
98 /* Module identifiers */
99 #define TI_I2C_PORT 0x01
100 #define TI_IEEE1284_PORT 0x02
101 #define TI_UART1_PORT 0x03
102 #define TI_UART2_PORT 0x04
103 #define TI_RAM_PORT 0x05
104
105 /* Modem status */
106 #define TI_MSR_DELTA_CTS 0x01
107 #define TI_MSR_DELTA_DSR 0x02
108 #define TI_MSR_DELTA_RI 0x04
109 #define TI_MSR_DELTA_CD 0x08
110 #define TI_MSR_CTS 0x10
111 #define TI_MSR_DSR 0x20
112 #define TI_MSR_RI 0x40
113 #define TI_MSR_CD 0x80
114 #define TI_MSR_DELTA_MASK 0x0F
115 #define TI_MSR_MASK 0xF0
116
117 /* Line status */
118 #define TI_LSR_OVERRUN_ERROR 0x01
119 #define TI_LSR_PARITY_ERROR 0x02
120 #define TI_LSR_FRAMING_ERROR 0x04
121 #define TI_LSR_BREAK 0x08
122 #define TI_LSR_ERROR 0x0F
123 #define TI_LSR_RX_FULL 0x10
124 #define TI_LSR_TX_EMPTY 0x20
125 #define TI_LSR_TX_EMPTY_BOTH 0x40
126
127 /* Line control */
128 #define TI_LCR_BREAK 0x40
129
130 /* Modem control */
131 #define TI_MCR_LOOP 0x04
132 #define TI_MCR_DTR 0x10
133 #define TI_MCR_RTS 0x20
134
135 /* Mask settings */
136 #define TI_UART_ENABLE_RTS_IN 0x0001
137 #define TI_UART_DISABLE_RTS 0x0002
138 #define TI_UART_ENABLE_PARITY_CHECKING 0x0008
139 #define TI_UART_ENABLE_DSR_OUT 0x0010
140 #define TI_UART_ENABLE_CTS_OUT 0x0020
141 #define TI_UART_ENABLE_X_OUT 0x0040
142 #define TI_UART_ENABLE_XA_OUT 0x0080
143 #define TI_UART_ENABLE_X_IN 0x0100
144 #define TI_UART_ENABLE_DTR_IN 0x0800
145 #define TI_UART_DISABLE_DTR 0x1000
146 #define TI_UART_ENABLE_MS_INTS 0x2000
147 #define TI_UART_ENABLE_AUTO_START_DMA 0x4000
148
149 /* Parity */
150 #define TI_UART_NO_PARITY 0x00
151 #define TI_UART_ODD_PARITY 0x01
152 #define TI_UART_EVEN_PARITY 0x02
153 #define TI_UART_MARK_PARITY 0x03
154 #define TI_UART_SPACE_PARITY 0x04
155
156 /* Stop bits */
157 #define TI_UART_1_STOP_BITS 0x00
158 #define TI_UART_1_5_STOP_BITS 0x01
159 #define TI_UART_2_STOP_BITS 0x02
160
161 /* Bits per character */
162 #define TI_UART_5_DATA_BITS 0x00
163 #define TI_UART_6_DATA_BITS 0x01
164 #define TI_UART_7_DATA_BITS 0x02
165 #define TI_UART_8_DATA_BITS 0x03
166
167 /* 232/485 modes */
168 #define TI_UART_232 0x00
169 #define TI_UART_485_RECEIVER_DISABLED 0x01
170 #define TI_UART_485_RECEIVER_ENABLED 0x02
171
172 /* Pipe transfer mode and timeout */
173 #define TI_PIPE_MODE_CONTINUOUS 0x01
174 #define TI_PIPE_MODE_MASK 0x03
175 #define TI_PIPE_TIMEOUT_MASK 0x7C
176 #define TI_PIPE_TIMEOUT_ENABLE 0x80
177
178 /* Config struct */
179 struct ti_uart_config {
180 __be16 wBaudRate;
181 __be16 wFlags;
182 u8 bDataBits;
183 u8 bParity;
184 u8 bStopBits;
185 char cXon;
186 char cXoff;
187 u8 bUartMode;
188 };
189
190 /* Get port status */
191 struct ti_port_status {
192 u8 bCmdCode;
193 u8 bModuleId;
194 u8 bErrorCode;
195 u8 bMSR;
196 u8 bLSR;
197 };
198
199 /* Purge modes */
200 #define TI_PURGE_OUTPUT 0x00
201 #define TI_PURGE_INPUT 0x80
202
203 /* Read/Write data */
204 #define TI_RW_DATA_ADDR_SFR 0x10
205 #define TI_RW_DATA_ADDR_IDATA 0x20
206 #define TI_RW_DATA_ADDR_XDATA 0x30
207 #define TI_RW_DATA_ADDR_CODE 0x40
208 #define TI_RW_DATA_ADDR_GPIO 0x50
209 #define TI_RW_DATA_ADDR_I2C 0x60
210 #define TI_RW_DATA_ADDR_FLASH 0x70
211 #define TI_RW_DATA_ADDR_DSP 0x80
212
213 #define TI_RW_DATA_UNSPECIFIED 0x00
214 #define TI_RW_DATA_BYTE 0x01
215 #define TI_RW_DATA_WORD 0x02
216 #define TI_RW_DATA_DOUBLE_WORD 0x04
217
218 struct ti_write_data_bytes {
219 u8 bAddrType;
220 u8 bDataType;
221 u8 bDataCounter;
222 __be16 wBaseAddrHi;
223 __be16 wBaseAddrLo;
224 u8 bData[];
225 } __packed;
226
227 struct ti_read_data_request {
228 u8 bAddrType;
229 u8 bDataType;
230 u8 bDataCounter;
231 __be16 wBaseAddrHi;
232 __be16 wBaseAddrLo;
233 } __packed;
234
235 struct ti_read_data_bytes {
236 u8 bCmdCode;
237 u8 bModuleId;
238 u8 bErrorCode;
239 u8 bData[];
240 };
241
242 /* Interrupt struct */
243 struct ti_interrupt {
244 u8 bICode;
245 u8 bIInfo;
246 };
247
248 /* Interrupt codes */
249 #define TI_CODE_HARDWARE_ERROR 0xFF
250 #define TI_CODE_DATA_ERROR 0x03
251 #define TI_CODE_MODEM_STATUS 0x04
252
253 /* Download firmware max packet size */
254 #define TI_DOWNLOAD_MAX_PACKET_SIZE 64
255
256 /* Firmware image header */
257 struct ti_firmware_header {
258 __le16 wLength;
259 u8 bCheckSum;
260 } __packed;
261
262 /* UART addresses */
263 #define TI_UART1_BASE_ADDR 0xFFA0 /* UART 1 base address */
264 #define TI_UART2_BASE_ADDR 0xFFB0 /* UART 2 base address */
265 #define TI_UART_OFFSET_LCR 0x0002 /* UART MCR register offset */
266 #define TI_UART_OFFSET_MCR 0x0004 /* UART MCR register offset */
267
268 #define TI_DRIVER_AUTHOR "Al Borchers <alborchers@steinerpoint.com>"
269 #define TI_DRIVER_DESC "TI USB 3410/5052 Serial Driver"
270
271 #define TI_FIRMWARE_BUF_SIZE 16284
272
273 #define TI_TRANSFER_TIMEOUT 2
274
275 /* read urb states */
276 #define TI_READ_URB_RUNNING 0
277 #define TI_READ_URB_STOPPING 1
278 #define TI_READ_URB_STOPPED 2
279
280 #define TI_EXTRA_VID_PID_COUNT 5
281
282 struct ti_port {
283 int tp_is_open;
284 u8 tp_msr;
285 u8 tp_shadow_mcr;
286 u8 tp_uart_mode; /* 232 or 485 modes */
287 unsigned int tp_uart_base_addr;
288 struct ti_device *tp_tdev;
289 struct usb_serial_port *tp_port;
290 spinlock_t tp_lock;
291 int tp_read_urb_state;
292 int tp_write_urb_in_use;
293 };
294
295 struct ti_device {
296 struct mutex td_open_close_lock;
297 int td_open_port_count;
298 struct usb_serial *td_serial;
299 int td_is_3410;
300 bool td_rs485_only;
301 };
302
303 static int ti_startup(struct usb_serial *serial);
304 static void ti_release(struct usb_serial *serial);
305 static int ti_port_probe(struct usb_serial_port *port);
306 static void ti_port_remove(struct usb_serial_port *port);
307 static int ti_open(struct tty_struct *tty, struct usb_serial_port *port);
308 static void ti_close(struct usb_serial_port *port);
309 static int ti_write(struct tty_struct *tty, struct usb_serial_port *port,
310 const unsigned char *data, int count);
311 static unsigned int ti_write_room(struct tty_struct *tty);
312 static unsigned int ti_chars_in_buffer(struct tty_struct *tty);
313 static bool ti_tx_empty(struct usb_serial_port *port);
314 static void ti_throttle(struct tty_struct *tty);
315 static void ti_unthrottle(struct tty_struct *tty);
316 static void ti_set_termios(struct tty_struct *tty,
317 struct usb_serial_port *port, struct ktermios *old_termios);
318 static int ti_tiocmget(struct tty_struct *tty);
319 static int ti_tiocmset(struct tty_struct *tty,
320 unsigned int set, unsigned int clear);
321 static void ti_break(struct tty_struct *tty, int break_state);
322 static void ti_interrupt_callback(struct urb *urb);
323 static void ti_bulk_in_callback(struct urb *urb);
324 static void ti_bulk_out_callback(struct urb *urb);
325
326 static void ti_recv(struct usb_serial_port *port, unsigned char *data,
327 int length);
328 static void ti_send(struct ti_port *tport);
329 static int ti_set_mcr(struct ti_port *tport, unsigned int mcr);
330 static int ti_get_lsr(struct ti_port *tport, u8 *lsr);
331 static void ti_get_serial_info(struct tty_struct *tty, struct serial_struct *ss);
332 static void ti_handle_new_msr(struct ti_port *tport, u8 msr);
333
334 static void ti_stop_read(struct ti_port *tport, struct tty_struct *tty);
335 static int ti_restart_read(struct ti_port *tport, struct tty_struct *tty);
336
337 static int ti_command_out_sync(struct usb_device *udev, u8 command,
338 u16 moduleid, u16 value, void *data, int size);
339 static int ti_command_in_sync(struct usb_device *udev, u8 command,
340 u16 moduleid, u16 value, void *data, int size);
341 static int ti_port_cmd_out(struct usb_serial_port *port, u8 command,
342 u16 value, void *data, int size);
343 static int ti_port_cmd_in(struct usb_serial_port *port, u8 command,
344 u16 value, void *data, int size);
345
346 static int ti_write_byte(struct usb_serial_port *port, struct ti_device *tdev,
347 unsigned long addr, u8 mask, u8 byte);
348
349 static int ti_download_firmware(struct ti_device *tdev);
350
351 static const struct usb_device_id ti_id_table_3410[] = {
352 { USB_DEVICE(TI_VENDOR_ID, TI_3410_PRODUCT_ID) },
353 { USB_DEVICE(TI_VENDOR_ID, TI_3410_EZ430_ID) },
354 { USB_DEVICE(MTS_VENDOR_ID, MTS_GSM_NO_FW_PRODUCT_ID) },
355 { USB_DEVICE(MTS_VENDOR_ID, MTS_CDMA_NO_FW_PRODUCT_ID) },
356 { USB_DEVICE(MTS_VENDOR_ID, MTS_CDMA_PRODUCT_ID) },
357 { USB_DEVICE(MTS_VENDOR_ID, MTS_GSM_PRODUCT_ID) },
358 { USB_DEVICE(MTS_VENDOR_ID, MTS_EDGE_PRODUCT_ID) },
359 { USB_DEVICE(MTS_VENDOR_ID, MTS_MT9234MU_PRODUCT_ID) },
360 { USB_DEVICE(MTS_VENDOR_ID, MTS_MT9234ZBA_PRODUCT_ID) },
361 { USB_DEVICE(MTS_VENDOR_ID, MTS_MT9234ZBAOLD_PRODUCT_ID) },
362 { USB_DEVICE(IBM_VENDOR_ID, IBM_4543_PRODUCT_ID) },
363 { USB_DEVICE(IBM_VENDOR_ID, IBM_454B_PRODUCT_ID) },
364 { USB_DEVICE(IBM_VENDOR_ID, IBM_454C_PRODUCT_ID) },
365 { USB_DEVICE(ABBOTT_VENDOR_ID, ABBOTT_STEREO_PLUG_ID) },
366 { USB_DEVICE(ABBOTT_VENDOR_ID, ABBOTT_STRIP_PORT_ID) },
367 { USB_DEVICE(TI_VENDOR_ID, FRI2_PRODUCT_ID) },
368 { USB_DEVICE(HONEYWELL_VENDOR_ID, HONEYWELL_HGI80_PRODUCT_ID) },
369 { USB_DEVICE(MXU1_VENDOR_ID, MXU1_1110_PRODUCT_ID) },
370 { USB_DEVICE(MXU1_VENDOR_ID, MXU1_1130_PRODUCT_ID) },
371 { USB_DEVICE(MXU1_VENDOR_ID, MXU1_1131_PRODUCT_ID) },
372 { USB_DEVICE(MXU1_VENDOR_ID, MXU1_1150_PRODUCT_ID) },
373 { USB_DEVICE(MXU1_VENDOR_ID, MXU1_1151_PRODUCT_ID) },
374 { USB_DEVICE(STARTECH_VENDOR_ID, TI_3410_PRODUCT_ID) },
375 { } /* terminator */
376 };
377
378 static const struct usb_device_id ti_id_table_5052[] = {
379 { USB_DEVICE(TI_VENDOR_ID, TI_5052_BOOT_PRODUCT_ID) },
380 { USB_DEVICE(TI_VENDOR_ID, TI_5152_BOOT_PRODUCT_ID) },
381 { USB_DEVICE(TI_VENDOR_ID, TI_5052_EEPROM_PRODUCT_ID) },
382 { USB_DEVICE(TI_VENDOR_ID, TI_5052_FIRMWARE_PRODUCT_ID) },
383 { }
384 };
385
386 static const struct usb_device_id ti_id_table_combined[] = {
387 { USB_DEVICE(TI_VENDOR_ID, TI_3410_PRODUCT_ID) },
388 { USB_DEVICE(TI_VENDOR_ID, TI_3410_EZ430_ID) },
389 { USB_DEVICE(MTS_VENDOR_ID, MTS_GSM_NO_FW_PRODUCT_ID) },
390 { USB_DEVICE(MTS_VENDOR_ID, MTS_CDMA_NO_FW_PRODUCT_ID) },
391 { USB_DEVICE(MTS_VENDOR_ID, MTS_CDMA_PRODUCT_ID) },
392 { USB_DEVICE(MTS_VENDOR_ID, MTS_GSM_PRODUCT_ID) },
393 { USB_DEVICE(MTS_VENDOR_ID, MTS_EDGE_PRODUCT_ID) },
394 { USB_DEVICE(MTS_VENDOR_ID, MTS_MT9234MU_PRODUCT_ID) },
395 { USB_DEVICE(MTS_VENDOR_ID, MTS_MT9234ZBA_PRODUCT_ID) },
396 { USB_DEVICE(MTS_VENDOR_ID, MTS_MT9234ZBAOLD_PRODUCT_ID) },
397 { USB_DEVICE(TI_VENDOR_ID, TI_5052_BOOT_PRODUCT_ID) },
398 { USB_DEVICE(TI_VENDOR_ID, TI_5152_BOOT_PRODUCT_ID) },
399 { USB_DEVICE(TI_VENDOR_ID, TI_5052_EEPROM_PRODUCT_ID) },
400 { USB_DEVICE(TI_VENDOR_ID, TI_5052_FIRMWARE_PRODUCT_ID) },
401 { USB_DEVICE(IBM_VENDOR_ID, IBM_4543_PRODUCT_ID) },
402 { USB_DEVICE(IBM_VENDOR_ID, IBM_454B_PRODUCT_ID) },
403 { USB_DEVICE(IBM_VENDOR_ID, IBM_454C_PRODUCT_ID) },
404 { USB_DEVICE(ABBOTT_VENDOR_ID, ABBOTT_PRODUCT_ID) },
405 { USB_DEVICE(ABBOTT_VENDOR_ID, ABBOTT_STRIP_PORT_ID) },
406 { USB_DEVICE(TI_VENDOR_ID, FRI2_PRODUCT_ID) },
407 { USB_DEVICE(HONEYWELL_VENDOR_ID, HONEYWELL_HGI80_PRODUCT_ID) },
408 { USB_DEVICE(MXU1_VENDOR_ID, MXU1_1110_PRODUCT_ID) },
409 { USB_DEVICE(MXU1_VENDOR_ID, MXU1_1130_PRODUCT_ID) },
410 { USB_DEVICE(MXU1_VENDOR_ID, MXU1_1131_PRODUCT_ID) },
411 { USB_DEVICE(MXU1_VENDOR_ID, MXU1_1150_PRODUCT_ID) },
412 { USB_DEVICE(MXU1_VENDOR_ID, MXU1_1151_PRODUCT_ID) },
413 { USB_DEVICE(STARTECH_VENDOR_ID, TI_3410_PRODUCT_ID) },
414 { } /* terminator */
415 };
416
417 static struct usb_serial_driver ti_1port_device = {
418 .driver = {
419 .owner = THIS_MODULE,
420 .name = "ti_usb_3410_5052_1",
421 },
422 .description = "TI USB 3410 1 port adapter",
423 .id_table = ti_id_table_3410,
424 .num_ports = 1,
425 .num_bulk_out = 1,
426 .attach = ti_startup,
427 .release = ti_release,
428 .port_probe = ti_port_probe,
429 .port_remove = ti_port_remove,
430 .open = ti_open,
431 .close = ti_close,
432 .write = ti_write,
433 .write_room = ti_write_room,
434 .chars_in_buffer = ti_chars_in_buffer,
435 .tx_empty = ti_tx_empty,
436 .throttle = ti_throttle,
437 .unthrottle = ti_unthrottle,
438 .get_serial = ti_get_serial_info,
439 .set_termios = ti_set_termios,
440 .tiocmget = ti_tiocmget,
441 .tiocmset = ti_tiocmset,
442 .tiocmiwait = usb_serial_generic_tiocmiwait,
443 .get_icount = usb_serial_generic_get_icount,
444 .break_ctl = ti_break,
445 .read_int_callback = ti_interrupt_callback,
446 .read_bulk_callback = ti_bulk_in_callback,
447 .write_bulk_callback = ti_bulk_out_callback,
448 };
449
450 static struct usb_serial_driver ti_2port_device = {
451 .driver = {
452 .owner = THIS_MODULE,
453 .name = "ti_usb_3410_5052_2",
454 },
455 .description = "TI USB 5052 2 port adapter",
456 .id_table = ti_id_table_5052,
457 .num_ports = 2,
458 .num_bulk_out = 1,
459 .attach = ti_startup,
460 .release = ti_release,
461 .port_probe = ti_port_probe,
462 .port_remove = ti_port_remove,
463 .open = ti_open,
464 .close = ti_close,
465 .write = ti_write,
466 .write_room = ti_write_room,
467 .chars_in_buffer = ti_chars_in_buffer,
468 .tx_empty = ti_tx_empty,
469 .throttle = ti_throttle,
470 .unthrottle = ti_unthrottle,
471 .get_serial = ti_get_serial_info,
472 .set_termios = ti_set_termios,
473 .tiocmget = ti_tiocmget,
474 .tiocmset = ti_tiocmset,
475 .tiocmiwait = usb_serial_generic_tiocmiwait,
476 .get_icount = usb_serial_generic_get_icount,
477 .break_ctl = ti_break,
478 .read_int_callback = ti_interrupt_callback,
479 .read_bulk_callback = ti_bulk_in_callback,
480 .write_bulk_callback = ti_bulk_out_callback,
481 };
482
483 static struct usb_serial_driver * const serial_drivers[] = {
484 &ti_1port_device, &ti_2port_device, NULL
485 };
486
487 MODULE_AUTHOR(TI_DRIVER_AUTHOR);
488 MODULE_DESCRIPTION(TI_DRIVER_DESC);
489 MODULE_LICENSE("GPL");
490
491 MODULE_FIRMWARE("ti_3410.fw");
492 MODULE_FIRMWARE("ti_5052.fw");
493 MODULE_FIRMWARE("mts_cdma.fw");
494 MODULE_FIRMWARE("mts_gsm.fw");
495 MODULE_FIRMWARE("mts_edge.fw");
496 MODULE_FIRMWARE("mts_mt9234mu.fw");
497 MODULE_FIRMWARE("mts_mt9234zba.fw");
498 MODULE_FIRMWARE("moxa/moxa-1110.fw");
499 MODULE_FIRMWARE("moxa/moxa-1130.fw");
500 MODULE_FIRMWARE("moxa/moxa-1131.fw");
501 MODULE_FIRMWARE("moxa/moxa-1150.fw");
502 MODULE_FIRMWARE("moxa/moxa-1151.fw");
503
504 MODULE_DEVICE_TABLE(usb, ti_id_table_combined);
505
506 module_usb_serial_driver(serial_drivers, ti_id_table_combined);
507
ti_startup(struct usb_serial * serial)508 static int ti_startup(struct usb_serial *serial)
509 {
510 struct ti_device *tdev;
511 struct usb_device *dev = serial->dev;
512 struct usb_host_interface *cur_altsetting;
513 int num_endpoints;
514 u16 vid, pid;
515 int status;
516
517 dev_dbg(&dev->dev,
518 "%s - product 0x%4X, num configurations %d, configuration value %d\n",
519 __func__, le16_to_cpu(dev->descriptor.idProduct),
520 dev->descriptor.bNumConfigurations,
521 dev->actconfig->desc.bConfigurationValue);
522
523 tdev = kzalloc(sizeof(struct ti_device), GFP_KERNEL);
524 if (!tdev)
525 return -ENOMEM;
526
527 mutex_init(&tdev->td_open_close_lock);
528 tdev->td_serial = serial;
529 usb_set_serial_data(serial, tdev);
530
531 /* determine device type */
532 if (serial->type == &ti_1port_device)
533 tdev->td_is_3410 = 1;
534 dev_dbg(&dev->dev, "%s - device type is %s\n", __func__,
535 tdev->td_is_3410 ? "3410" : "5052");
536
537 vid = le16_to_cpu(dev->descriptor.idVendor);
538 pid = le16_to_cpu(dev->descriptor.idProduct);
539 if (vid == MXU1_VENDOR_ID) {
540 switch (pid) {
541 case MXU1_1130_PRODUCT_ID:
542 case MXU1_1131_PRODUCT_ID:
543 tdev->td_rs485_only = true;
544 break;
545 }
546 }
547
548 cur_altsetting = serial->interface->cur_altsetting;
549 num_endpoints = cur_altsetting->desc.bNumEndpoints;
550
551 /* if we have only 1 configuration and 1 endpoint, download firmware */
552 if (dev->descriptor.bNumConfigurations == 1 && num_endpoints == 1) {
553 status = ti_download_firmware(tdev);
554
555 if (status != 0)
556 goto free_tdev;
557
558 /* 3410 must be reset, 5052 resets itself */
559 if (tdev->td_is_3410) {
560 msleep_interruptible(100);
561 usb_reset_device(dev);
562 }
563
564 status = -ENODEV;
565 goto free_tdev;
566 }
567
568 /* the second configuration must be set */
569 if (dev->actconfig->desc.bConfigurationValue == TI_BOOT_CONFIG) {
570 status = usb_driver_set_configuration(dev, TI_ACTIVE_CONFIG);
571 status = status ? status : -ENODEV;
572 goto free_tdev;
573 }
574
575 if (serial->num_bulk_in < serial->num_ports ||
576 serial->num_bulk_out < serial->num_ports) {
577 dev_err(&serial->interface->dev, "missing endpoints\n");
578 status = -ENODEV;
579 goto free_tdev;
580 }
581
582 return 0;
583
584 free_tdev:
585 kfree(tdev);
586 usb_set_serial_data(serial, NULL);
587 return status;
588 }
589
590
ti_release(struct usb_serial * serial)591 static void ti_release(struct usb_serial *serial)
592 {
593 struct ti_device *tdev = usb_get_serial_data(serial);
594
595 kfree(tdev);
596 }
597
ti_port_probe(struct usb_serial_port * port)598 static int ti_port_probe(struct usb_serial_port *port)
599 {
600 struct ti_port *tport;
601
602 tport = kzalloc(sizeof(*tport), GFP_KERNEL);
603 if (!tport)
604 return -ENOMEM;
605
606 spin_lock_init(&tport->tp_lock);
607 if (port == port->serial->port[0])
608 tport->tp_uart_base_addr = TI_UART1_BASE_ADDR;
609 else
610 tport->tp_uart_base_addr = TI_UART2_BASE_ADDR;
611 tport->tp_port = port;
612 tport->tp_tdev = usb_get_serial_data(port->serial);
613
614 if (tport->tp_tdev->td_rs485_only)
615 tport->tp_uart_mode = TI_UART_485_RECEIVER_DISABLED;
616 else
617 tport->tp_uart_mode = TI_UART_232;
618
619 usb_set_serial_port_data(port, tport);
620
621 /*
622 * The TUSB5052 LSR does not tell when the transmitter shift register
623 * has emptied so add a one-character drain delay.
624 */
625 if (!tport->tp_tdev->td_is_3410)
626 port->port.drain_delay = 1;
627
628 return 0;
629 }
630
ti_port_remove(struct usb_serial_port * port)631 static void ti_port_remove(struct usb_serial_port *port)
632 {
633 struct ti_port *tport;
634
635 tport = usb_get_serial_port_data(port);
636 kfree(tport);
637 }
638
ti_open(struct tty_struct * tty,struct usb_serial_port * port)639 static int ti_open(struct tty_struct *tty, struct usb_serial_port *port)
640 {
641 struct ti_port *tport = usb_get_serial_port_data(port);
642 struct ti_device *tdev;
643 struct usb_device *dev;
644 struct urb *urb;
645 int status;
646 u16 open_settings;
647
648 open_settings = (TI_PIPE_MODE_CONTINUOUS |
649 TI_PIPE_TIMEOUT_ENABLE |
650 (TI_TRANSFER_TIMEOUT << 2));
651
652 dev = port->serial->dev;
653 tdev = tport->tp_tdev;
654
655 /* only one open on any port on a device at a time */
656 if (mutex_lock_interruptible(&tdev->td_open_close_lock))
657 return -ERESTARTSYS;
658
659 tport->tp_msr = 0;
660 tport->tp_shadow_mcr |= (TI_MCR_RTS | TI_MCR_DTR);
661
662 /* start interrupt urb the first time a port is opened on this device */
663 if (tdev->td_open_port_count == 0) {
664 dev_dbg(&port->dev, "%s - start interrupt in urb\n", __func__);
665 urb = tdev->td_serial->port[0]->interrupt_in_urb;
666 if (!urb) {
667 dev_err(&port->dev, "%s - no interrupt urb\n", __func__);
668 status = -EINVAL;
669 goto release_lock;
670 }
671 urb->context = tdev;
672 status = usb_submit_urb(urb, GFP_KERNEL);
673 if (status) {
674 dev_err(&port->dev, "%s - submit interrupt urb failed, %d\n", __func__, status);
675 goto release_lock;
676 }
677 }
678
679 if (tty)
680 ti_set_termios(tty, port, &tty->termios);
681
682 status = ti_port_cmd_out(port, TI_OPEN_PORT, open_settings, NULL, 0);
683 if (status) {
684 dev_err(&port->dev, "%s - cannot send open command, %d\n",
685 __func__, status);
686 goto unlink_int_urb;
687 }
688
689 status = ti_port_cmd_out(port, TI_START_PORT, 0, NULL, 0);
690 if (status) {
691 dev_err(&port->dev, "%s - cannot send start command, %d\n",
692 __func__, status);
693 goto unlink_int_urb;
694 }
695
696 status = ti_port_cmd_out(port, TI_PURGE_PORT, TI_PURGE_INPUT, NULL, 0);
697 if (status) {
698 dev_err(&port->dev, "%s - cannot clear input buffers, %d\n",
699 __func__, status);
700 goto unlink_int_urb;
701 }
702 status = ti_port_cmd_out(port, TI_PURGE_PORT, TI_PURGE_OUTPUT, NULL, 0);
703 if (status) {
704 dev_err(&port->dev, "%s - cannot clear output buffers, %d\n",
705 __func__, status);
706 goto unlink_int_urb;
707 }
708
709 /* reset the data toggle on the bulk endpoints to work around bug in
710 * host controllers where things get out of sync some times */
711 usb_clear_halt(dev, port->write_urb->pipe);
712 usb_clear_halt(dev, port->read_urb->pipe);
713
714 if (tty)
715 ti_set_termios(tty, port, &tty->termios);
716
717 status = ti_port_cmd_out(port, TI_OPEN_PORT, open_settings, NULL, 0);
718 if (status) {
719 dev_err(&port->dev, "%s - cannot send open command (2), %d\n",
720 __func__, status);
721 goto unlink_int_urb;
722 }
723
724 status = ti_port_cmd_out(port, TI_START_PORT, 0, NULL, 0);
725 if (status) {
726 dev_err(&port->dev, "%s - cannot send start command (2), %d\n",
727 __func__, status);
728 goto unlink_int_urb;
729 }
730
731 /* start read urb */
732 urb = port->read_urb;
733 if (!urb) {
734 dev_err(&port->dev, "%s - no read urb\n", __func__);
735 status = -EINVAL;
736 goto unlink_int_urb;
737 }
738 tport->tp_read_urb_state = TI_READ_URB_RUNNING;
739 urb->context = tport;
740 status = usb_submit_urb(urb, GFP_KERNEL);
741 if (status) {
742 dev_err(&port->dev, "%s - submit read urb failed, %d\n",
743 __func__, status);
744 goto unlink_int_urb;
745 }
746
747 tport->tp_is_open = 1;
748 ++tdev->td_open_port_count;
749
750 goto release_lock;
751
752 unlink_int_urb:
753 if (tdev->td_open_port_count == 0)
754 usb_kill_urb(port->serial->port[0]->interrupt_in_urb);
755 release_lock:
756 mutex_unlock(&tdev->td_open_close_lock);
757 return status;
758 }
759
760
ti_close(struct usb_serial_port * port)761 static void ti_close(struct usb_serial_port *port)
762 {
763 struct ti_device *tdev;
764 struct ti_port *tport;
765 int status;
766 unsigned long flags;
767
768 tdev = usb_get_serial_data(port->serial);
769 tport = usb_get_serial_port_data(port);
770
771 tport->tp_is_open = 0;
772
773 usb_kill_urb(port->read_urb);
774 usb_kill_urb(port->write_urb);
775 tport->tp_write_urb_in_use = 0;
776 spin_lock_irqsave(&tport->tp_lock, flags);
777 kfifo_reset_out(&port->write_fifo);
778 spin_unlock_irqrestore(&tport->tp_lock, flags);
779
780 status = ti_port_cmd_out(port, TI_CLOSE_PORT, 0, NULL, 0);
781 if (status)
782 dev_err(&port->dev,
783 "%s - cannot send close port command, %d\n"
784 , __func__, status);
785
786 mutex_lock(&tdev->td_open_close_lock);
787 --tdev->td_open_port_count;
788 if (tdev->td_open_port_count == 0) {
789 /* last port is closed, shut down interrupt urb */
790 usb_kill_urb(port->serial->port[0]->interrupt_in_urb);
791 }
792 mutex_unlock(&tdev->td_open_close_lock);
793 }
794
795
ti_write(struct tty_struct * tty,struct usb_serial_port * port,const unsigned char * data,int count)796 static int ti_write(struct tty_struct *tty, struct usb_serial_port *port,
797 const unsigned char *data, int count)
798 {
799 struct ti_port *tport = usb_get_serial_port_data(port);
800
801 if (count == 0) {
802 return 0;
803 }
804
805 if (!tport->tp_is_open)
806 return -ENODEV;
807
808 count = kfifo_in_locked(&port->write_fifo, data, count,
809 &tport->tp_lock);
810 ti_send(tport);
811
812 return count;
813 }
814
815
ti_write_room(struct tty_struct * tty)816 static unsigned int ti_write_room(struct tty_struct *tty)
817 {
818 struct usb_serial_port *port = tty->driver_data;
819 struct ti_port *tport = usb_get_serial_port_data(port);
820 unsigned int room;
821 unsigned long flags;
822
823 spin_lock_irqsave(&tport->tp_lock, flags);
824 room = kfifo_avail(&port->write_fifo);
825 spin_unlock_irqrestore(&tport->tp_lock, flags);
826
827 dev_dbg(&port->dev, "%s - returns %u\n", __func__, room);
828 return room;
829 }
830
831
ti_chars_in_buffer(struct tty_struct * tty)832 static unsigned int ti_chars_in_buffer(struct tty_struct *tty)
833 {
834 struct usb_serial_port *port = tty->driver_data;
835 struct ti_port *tport = usb_get_serial_port_data(port);
836 unsigned int chars;
837 unsigned long flags;
838
839 spin_lock_irqsave(&tport->tp_lock, flags);
840 chars = kfifo_len(&port->write_fifo);
841 spin_unlock_irqrestore(&tport->tp_lock, flags);
842
843 dev_dbg(&port->dev, "%s - returns %u\n", __func__, chars);
844 return chars;
845 }
846
ti_tx_empty(struct usb_serial_port * port)847 static bool ti_tx_empty(struct usb_serial_port *port)
848 {
849 struct ti_port *tport = usb_get_serial_port_data(port);
850 u8 lsr, mask;
851 int ret;
852
853 /*
854 * TUSB5052 does not have the TEMT bit to tell if the shift register
855 * is empty.
856 */
857 if (tport->tp_tdev->td_is_3410)
858 mask = TI_LSR_TX_EMPTY_BOTH;
859 else
860 mask = TI_LSR_TX_EMPTY;
861
862 ret = ti_get_lsr(tport, &lsr);
863 if (!ret && !(lsr & mask))
864 return false;
865
866 return true;
867 }
868
ti_throttle(struct tty_struct * tty)869 static void ti_throttle(struct tty_struct *tty)
870 {
871 struct usb_serial_port *port = tty->driver_data;
872 struct ti_port *tport = usb_get_serial_port_data(port);
873
874 if (I_IXOFF(tty) || C_CRTSCTS(tty))
875 ti_stop_read(tport, tty);
876
877 }
878
879
ti_unthrottle(struct tty_struct * tty)880 static void ti_unthrottle(struct tty_struct *tty)
881 {
882 struct usb_serial_port *port = tty->driver_data;
883 struct ti_port *tport = usb_get_serial_port_data(port);
884 int status;
885
886 if (I_IXOFF(tty) || C_CRTSCTS(tty)) {
887 status = ti_restart_read(tport, tty);
888 if (status)
889 dev_err(&port->dev, "%s - cannot restart read, %d\n",
890 __func__, status);
891 }
892 }
893
ti_set_termios(struct tty_struct * tty,struct usb_serial_port * port,struct ktermios * old_termios)894 static void ti_set_termios(struct tty_struct *tty,
895 struct usb_serial_port *port, struct ktermios *old_termios)
896 {
897 struct ti_port *tport = usb_get_serial_port_data(port);
898 struct ti_uart_config *config;
899 int baud;
900 int status;
901 unsigned int mcr;
902 u16 wbaudrate;
903 u16 wflags = 0;
904
905 config = kmalloc(sizeof(*config), GFP_KERNEL);
906 if (!config)
907 return;
908
909 /* these flags must be set */
910 wflags |= TI_UART_ENABLE_MS_INTS;
911 wflags |= TI_UART_ENABLE_AUTO_START_DMA;
912 config->bUartMode = tport->tp_uart_mode;
913
914 switch (C_CSIZE(tty)) {
915 case CS5:
916 config->bDataBits = TI_UART_5_DATA_BITS;
917 break;
918 case CS6:
919 config->bDataBits = TI_UART_6_DATA_BITS;
920 break;
921 case CS7:
922 config->bDataBits = TI_UART_7_DATA_BITS;
923 break;
924 default:
925 case CS8:
926 config->bDataBits = TI_UART_8_DATA_BITS;
927 break;
928 }
929
930 /* CMSPAR isn't supported by this driver */
931 tty->termios.c_cflag &= ~CMSPAR;
932
933 if (C_PARENB(tty)) {
934 if (C_PARODD(tty)) {
935 wflags |= TI_UART_ENABLE_PARITY_CHECKING;
936 config->bParity = TI_UART_ODD_PARITY;
937 } else {
938 wflags |= TI_UART_ENABLE_PARITY_CHECKING;
939 config->bParity = TI_UART_EVEN_PARITY;
940 }
941 } else {
942 wflags &= ~TI_UART_ENABLE_PARITY_CHECKING;
943 config->bParity = TI_UART_NO_PARITY;
944 }
945
946 if (C_CSTOPB(tty))
947 config->bStopBits = TI_UART_2_STOP_BITS;
948 else
949 config->bStopBits = TI_UART_1_STOP_BITS;
950
951 if (C_CRTSCTS(tty)) {
952 /* RTS flow control must be off to drop RTS for baud rate B0 */
953 if ((C_BAUD(tty)) != B0)
954 wflags |= TI_UART_ENABLE_RTS_IN;
955 wflags |= TI_UART_ENABLE_CTS_OUT;
956 } else {
957 ti_restart_read(tport, tty);
958 }
959
960 if (I_IXOFF(tty) || I_IXON(tty)) {
961 config->cXon = START_CHAR(tty);
962 config->cXoff = STOP_CHAR(tty);
963
964 if (I_IXOFF(tty))
965 wflags |= TI_UART_ENABLE_X_IN;
966 else
967 ti_restart_read(tport, tty);
968
969 if (I_IXON(tty))
970 wflags |= TI_UART_ENABLE_X_OUT;
971 }
972
973 baud = tty_get_baud_rate(tty);
974 if (!baud)
975 baud = 9600;
976 if (tport->tp_tdev->td_is_3410)
977 wbaudrate = (923077 + baud/2) / baud;
978 else
979 wbaudrate = (461538 + baud/2) / baud;
980
981 /* FIXME: Should calculate resulting baud here and report it back */
982 if ((C_BAUD(tty)) != B0)
983 tty_encode_baud_rate(tty, baud, baud);
984
985 dev_dbg(&port->dev,
986 "%s - BaudRate=%d, wBaudRate=%d, wFlags=0x%04X, bDataBits=%d, bParity=%d, bStopBits=%d, cXon=%d, cXoff=%d, bUartMode=%d\n",
987 __func__, baud, wbaudrate, wflags,
988 config->bDataBits, config->bParity, config->bStopBits,
989 config->cXon, config->cXoff, config->bUartMode);
990
991 config->wBaudRate = cpu_to_be16(wbaudrate);
992 config->wFlags = cpu_to_be16(wflags);
993
994 status = ti_port_cmd_out(port, TI_SET_CONFIG, 0, config,
995 sizeof(*config));
996 if (status)
997 dev_err(&port->dev, "%s - cannot set config on port %d, %d\n",
998 __func__, port->port_number, status);
999
1000 /* SET_CONFIG asserts RTS and DTR, reset them correctly */
1001 mcr = tport->tp_shadow_mcr;
1002 /* if baud rate is B0, clear RTS and DTR */
1003 if (C_BAUD(tty) == B0)
1004 mcr &= ~(TI_MCR_DTR | TI_MCR_RTS);
1005 status = ti_set_mcr(tport, mcr);
1006 if (status)
1007 dev_err(&port->dev, "%s - cannot set modem control on port %d, %d\n",
1008 __func__, port->port_number, status);
1009
1010 kfree(config);
1011 }
1012
1013
ti_tiocmget(struct tty_struct * tty)1014 static int ti_tiocmget(struct tty_struct *tty)
1015 {
1016 struct usb_serial_port *port = tty->driver_data;
1017 struct ti_port *tport = usb_get_serial_port_data(port);
1018 unsigned int result;
1019 unsigned int msr;
1020 unsigned int mcr;
1021 unsigned long flags;
1022
1023 spin_lock_irqsave(&tport->tp_lock, flags);
1024 msr = tport->tp_msr;
1025 mcr = tport->tp_shadow_mcr;
1026 spin_unlock_irqrestore(&tport->tp_lock, flags);
1027
1028 result = ((mcr & TI_MCR_DTR) ? TIOCM_DTR : 0)
1029 | ((mcr & TI_MCR_RTS) ? TIOCM_RTS : 0)
1030 | ((mcr & TI_MCR_LOOP) ? TIOCM_LOOP : 0)
1031 | ((msr & TI_MSR_CTS) ? TIOCM_CTS : 0)
1032 | ((msr & TI_MSR_CD) ? TIOCM_CAR : 0)
1033 | ((msr & TI_MSR_RI) ? TIOCM_RI : 0)
1034 | ((msr & TI_MSR_DSR) ? TIOCM_DSR : 0);
1035
1036 dev_dbg(&port->dev, "%s - 0x%04X\n", __func__, result);
1037
1038 return result;
1039 }
1040
1041
ti_tiocmset(struct tty_struct * tty,unsigned int set,unsigned int clear)1042 static int ti_tiocmset(struct tty_struct *tty,
1043 unsigned int set, unsigned int clear)
1044 {
1045 struct usb_serial_port *port = tty->driver_data;
1046 struct ti_port *tport = usb_get_serial_port_data(port);
1047 unsigned int mcr;
1048 unsigned long flags;
1049
1050 spin_lock_irqsave(&tport->tp_lock, flags);
1051 mcr = tport->tp_shadow_mcr;
1052
1053 if (set & TIOCM_RTS)
1054 mcr |= TI_MCR_RTS;
1055 if (set & TIOCM_DTR)
1056 mcr |= TI_MCR_DTR;
1057 if (set & TIOCM_LOOP)
1058 mcr |= TI_MCR_LOOP;
1059
1060 if (clear & TIOCM_RTS)
1061 mcr &= ~TI_MCR_RTS;
1062 if (clear & TIOCM_DTR)
1063 mcr &= ~TI_MCR_DTR;
1064 if (clear & TIOCM_LOOP)
1065 mcr &= ~TI_MCR_LOOP;
1066 spin_unlock_irqrestore(&tport->tp_lock, flags);
1067
1068 return ti_set_mcr(tport, mcr);
1069 }
1070
1071
ti_break(struct tty_struct * tty,int break_state)1072 static void ti_break(struct tty_struct *tty, int break_state)
1073 {
1074 struct usb_serial_port *port = tty->driver_data;
1075 struct ti_port *tport = usb_get_serial_port_data(port);
1076 int status;
1077
1078 dev_dbg(&port->dev, "%s - state = %d\n", __func__, break_state);
1079
1080 status = ti_write_byte(port, tport->tp_tdev,
1081 tport->tp_uart_base_addr + TI_UART_OFFSET_LCR,
1082 TI_LCR_BREAK, break_state == -1 ? TI_LCR_BREAK : 0);
1083
1084 if (status)
1085 dev_dbg(&port->dev, "%s - error setting break, %d\n", __func__, status);
1086 }
1087
ti_get_port_from_code(unsigned char code)1088 static int ti_get_port_from_code(unsigned char code)
1089 {
1090 return (code >> 6) & 0x01;
1091 }
1092
ti_get_func_from_code(unsigned char code)1093 static int ti_get_func_from_code(unsigned char code)
1094 {
1095 return code & 0x0f;
1096 }
1097
ti_interrupt_callback(struct urb * urb)1098 static void ti_interrupt_callback(struct urb *urb)
1099 {
1100 struct ti_device *tdev = urb->context;
1101 struct usb_serial_port *port;
1102 struct usb_serial *serial = tdev->td_serial;
1103 struct ti_port *tport;
1104 struct device *dev = &urb->dev->dev;
1105 unsigned char *data = urb->transfer_buffer;
1106 int length = urb->actual_length;
1107 int port_number;
1108 int function;
1109 int status = urb->status;
1110 int retval;
1111 u8 msr;
1112
1113 switch (status) {
1114 case 0:
1115 break;
1116 case -ECONNRESET:
1117 case -ENOENT:
1118 case -ESHUTDOWN:
1119 dev_dbg(dev, "%s - urb shutting down, %d\n", __func__, status);
1120 return;
1121 default:
1122 dev_err(dev, "%s - nonzero urb status, %d\n", __func__, status);
1123 goto exit;
1124 }
1125
1126 if (length != 2) {
1127 dev_dbg(dev, "%s - bad packet size, %d\n", __func__, length);
1128 goto exit;
1129 }
1130
1131 if (data[0] == TI_CODE_HARDWARE_ERROR) {
1132 dev_err(dev, "%s - hardware error, %d\n", __func__, data[1]);
1133 goto exit;
1134 }
1135
1136 port_number = ti_get_port_from_code(data[0]);
1137 function = ti_get_func_from_code(data[0]);
1138
1139 dev_dbg(dev, "%s - port_number %d, function %d, data 0x%02X\n",
1140 __func__, port_number, function, data[1]);
1141
1142 if (port_number >= serial->num_ports) {
1143 dev_err(dev, "%s - bad port number, %d\n",
1144 __func__, port_number);
1145 goto exit;
1146 }
1147
1148 port = serial->port[port_number];
1149
1150 tport = usb_get_serial_port_data(port);
1151 if (!tport)
1152 goto exit;
1153
1154 switch (function) {
1155 case TI_CODE_DATA_ERROR:
1156 dev_err(dev, "%s - DATA ERROR, port %d, data 0x%02X\n",
1157 __func__, port_number, data[1]);
1158 break;
1159
1160 case TI_CODE_MODEM_STATUS:
1161 msr = data[1];
1162 dev_dbg(dev, "%s - port %d, msr 0x%02X\n", __func__, port_number, msr);
1163 ti_handle_new_msr(tport, msr);
1164 break;
1165
1166 default:
1167 dev_err(dev, "%s - unknown interrupt code, 0x%02X\n",
1168 __func__, data[1]);
1169 break;
1170 }
1171
1172 exit:
1173 retval = usb_submit_urb(urb, GFP_ATOMIC);
1174 if (retval)
1175 dev_err(dev, "%s - resubmit interrupt urb failed, %d\n",
1176 __func__, retval);
1177 }
1178
1179
ti_bulk_in_callback(struct urb * urb)1180 static void ti_bulk_in_callback(struct urb *urb)
1181 {
1182 struct ti_port *tport = urb->context;
1183 struct usb_serial_port *port = tport->tp_port;
1184 struct device *dev = &urb->dev->dev;
1185 int status = urb->status;
1186 unsigned long flags;
1187 int retval = 0;
1188
1189 switch (status) {
1190 case 0:
1191 break;
1192 case -ECONNRESET:
1193 case -ENOENT:
1194 case -ESHUTDOWN:
1195 dev_dbg(dev, "%s - urb shutting down, %d\n", __func__, status);
1196 return;
1197 default:
1198 dev_err(dev, "%s - nonzero urb status, %d\n",
1199 __func__, status);
1200 }
1201
1202 if (status == -EPIPE)
1203 goto exit;
1204
1205 if (status) {
1206 dev_err(dev, "%s - stopping read!\n", __func__);
1207 return;
1208 }
1209
1210 if (urb->actual_length) {
1211 usb_serial_debug_data(dev, __func__, urb->actual_length,
1212 urb->transfer_buffer);
1213
1214 if (!tport->tp_is_open)
1215 dev_dbg(dev, "%s - port closed, dropping data\n",
1216 __func__);
1217 else
1218 ti_recv(port, urb->transfer_buffer, urb->actual_length);
1219 spin_lock_irqsave(&tport->tp_lock, flags);
1220 port->icount.rx += urb->actual_length;
1221 spin_unlock_irqrestore(&tport->tp_lock, flags);
1222 }
1223
1224 exit:
1225 /* continue to read unless stopping */
1226 spin_lock_irqsave(&tport->tp_lock, flags);
1227 if (tport->tp_read_urb_state == TI_READ_URB_RUNNING)
1228 retval = usb_submit_urb(urb, GFP_ATOMIC);
1229 else if (tport->tp_read_urb_state == TI_READ_URB_STOPPING)
1230 tport->tp_read_urb_state = TI_READ_URB_STOPPED;
1231
1232 spin_unlock_irqrestore(&tport->tp_lock, flags);
1233 if (retval)
1234 dev_err(dev, "%s - resubmit read urb failed, %d\n",
1235 __func__, retval);
1236 }
1237
1238
ti_bulk_out_callback(struct urb * urb)1239 static void ti_bulk_out_callback(struct urb *urb)
1240 {
1241 struct ti_port *tport = urb->context;
1242 struct usb_serial_port *port = tport->tp_port;
1243 int status = urb->status;
1244
1245 tport->tp_write_urb_in_use = 0;
1246
1247 switch (status) {
1248 case 0:
1249 break;
1250 case -ECONNRESET:
1251 case -ENOENT:
1252 case -ESHUTDOWN:
1253 dev_dbg(&port->dev, "%s - urb shutting down, %d\n", __func__, status);
1254 return;
1255 default:
1256 dev_err_console(port, "%s - nonzero urb status, %d\n",
1257 __func__, status);
1258 }
1259
1260 /* send any buffered data */
1261 ti_send(tport);
1262 }
1263
1264
ti_recv(struct usb_serial_port * port,unsigned char * data,int length)1265 static void ti_recv(struct usb_serial_port *port, unsigned char *data,
1266 int length)
1267 {
1268 int cnt;
1269
1270 do {
1271 cnt = tty_insert_flip_string(&port->port, data, length);
1272 if (cnt < length) {
1273 dev_err(&port->dev, "%s - dropping data, %d bytes lost\n",
1274 __func__, length - cnt);
1275 if (cnt == 0)
1276 break;
1277 }
1278 tty_flip_buffer_push(&port->port);
1279 data += cnt;
1280 length -= cnt;
1281 } while (length > 0);
1282 }
1283
1284
ti_send(struct ti_port * tport)1285 static void ti_send(struct ti_port *tport)
1286 {
1287 int count, result;
1288 struct usb_serial_port *port = tport->tp_port;
1289 unsigned long flags;
1290
1291 spin_lock_irqsave(&tport->tp_lock, flags);
1292
1293 if (tport->tp_write_urb_in_use)
1294 goto unlock;
1295
1296 count = kfifo_out(&port->write_fifo,
1297 port->write_urb->transfer_buffer,
1298 port->bulk_out_size);
1299
1300 if (count == 0)
1301 goto unlock;
1302
1303 tport->tp_write_urb_in_use = 1;
1304
1305 spin_unlock_irqrestore(&tport->tp_lock, flags);
1306
1307 usb_serial_debug_data(&port->dev, __func__, count,
1308 port->write_urb->transfer_buffer);
1309
1310 usb_fill_bulk_urb(port->write_urb, port->serial->dev,
1311 usb_sndbulkpipe(port->serial->dev,
1312 port->bulk_out_endpointAddress),
1313 port->write_urb->transfer_buffer, count,
1314 ti_bulk_out_callback, tport);
1315
1316 result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
1317 if (result) {
1318 dev_err_console(port, "%s - submit write urb failed, %d\n",
1319 __func__, result);
1320 tport->tp_write_urb_in_use = 0;
1321 /* TODO: reschedule ti_send */
1322 } else {
1323 spin_lock_irqsave(&tport->tp_lock, flags);
1324 port->icount.tx += count;
1325 spin_unlock_irqrestore(&tport->tp_lock, flags);
1326 }
1327
1328 /* more room in the buffer for new writes, wakeup */
1329 tty_port_tty_wakeup(&port->port);
1330
1331 return;
1332 unlock:
1333 spin_unlock_irqrestore(&tport->tp_lock, flags);
1334 return;
1335 }
1336
1337
ti_set_mcr(struct ti_port * tport,unsigned int mcr)1338 static int ti_set_mcr(struct ti_port *tport, unsigned int mcr)
1339 {
1340 unsigned long flags;
1341 int status;
1342
1343 status = ti_write_byte(tport->tp_port, tport->tp_tdev,
1344 tport->tp_uart_base_addr + TI_UART_OFFSET_MCR,
1345 TI_MCR_RTS | TI_MCR_DTR | TI_MCR_LOOP, mcr);
1346
1347 spin_lock_irqsave(&tport->tp_lock, flags);
1348 if (!status)
1349 tport->tp_shadow_mcr = mcr;
1350 spin_unlock_irqrestore(&tport->tp_lock, flags);
1351
1352 return status;
1353 }
1354
1355
ti_get_lsr(struct ti_port * tport,u8 * lsr)1356 static int ti_get_lsr(struct ti_port *tport, u8 *lsr)
1357 {
1358 int size, status;
1359 struct usb_serial_port *port = tport->tp_port;
1360 struct ti_port_status *data;
1361
1362 size = sizeof(struct ti_port_status);
1363 data = kmalloc(size, GFP_KERNEL);
1364 if (!data)
1365 return -ENOMEM;
1366
1367 status = ti_port_cmd_in(port, TI_GET_PORT_STATUS, 0, data, size);
1368 if (status) {
1369 dev_err(&port->dev,
1370 "%s - get port status command failed, %d\n",
1371 __func__, status);
1372 goto free_data;
1373 }
1374
1375 dev_dbg(&port->dev, "%s - lsr 0x%02X\n", __func__, data->bLSR);
1376
1377 *lsr = data->bLSR;
1378
1379 free_data:
1380 kfree(data);
1381 return status;
1382 }
1383
1384
ti_get_serial_info(struct tty_struct * tty,struct serial_struct * ss)1385 static void ti_get_serial_info(struct tty_struct *tty, struct serial_struct *ss)
1386 {
1387 struct usb_serial_port *port = tty->driver_data;
1388 struct ti_port *tport = usb_get_serial_port_data(port);
1389
1390 ss->baud_base = tport->tp_tdev->td_is_3410 ? 921600 : 460800;
1391 }
1392
1393
ti_handle_new_msr(struct ti_port * tport,u8 msr)1394 static void ti_handle_new_msr(struct ti_port *tport, u8 msr)
1395 {
1396 struct async_icount *icount;
1397 struct tty_struct *tty;
1398 unsigned long flags;
1399
1400 dev_dbg(&tport->tp_port->dev, "%s - msr 0x%02X\n", __func__, msr);
1401
1402 if (msr & TI_MSR_DELTA_MASK) {
1403 spin_lock_irqsave(&tport->tp_lock, flags);
1404 icount = &tport->tp_port->icount;
1405 if (msr & TI_MSR_DELTA_CTS)
1406 icount->cts++;
1407 if (msr & TI_MSR_DELTA_DSR)
1408 icount->dsr++;
1409 if (msr & TI_MSR_DELTA_CD)
1410 icount->dcd++;
1411 if (msr & TI_MSR_DELTA_RI)
1412 icount->rng++;
1413 wake_up_interruptible(&tport->tp_port->port.delta_msr_wait);
1414 spin_unlock_irqrestore(&tport->tp_lock, flags);
1415 }
1416
1417 tport->tp_msr = msr & TI_MSR_MASK;
1418
1419 /* handle CTS flow control */
1420 tty = tty_port_tty_get(&tport->tp_port->port);
1421 if (tty && C_CRTSCTS(tty)) {
1422 if (msr & TI_MSR_CTS)
1423 tty_wakeup(tty);
1424 }
1425 tty_kref_put(tty);
1426 }
1427
1428
ti_stop_read(struct ti_port * tport,struct tty_struct * tty)1429 static void ti_stop_read(struct ti_port *tport, struct tty_struct *tty)
1430 {
1431 unsigned long flags;
1432
1433 spin_lock_irqsave(&tport->tp_lock, flags);
1434
1435 if (tport->tp_read_urb_state == TI_READ_URB_RUNNING)
1436 tport->tp_read_urb_state = TI_READ_URB_STOPPING;
1437
1438 spin_unlock_irqrestore(&tport->tp_lock, flags);
1439 }
1440
1441
ti_restart_read(struct ti_port * tport,struct tty_struct * tty)1442 static int ti_restart_read(struct ti_port *tport, struct tty_struct *tty)
1443 {
1444 struct urb *urb;
1445 int status = 0;
1446 unsigned long flags;
1447
1448 spin_lock_irqsave(&tport->tp_lock, flags);
1449
1450 if (tport->tp_read_urb_state == TI_READ_URB_STOPPED) {
1451 tport->tp_read_urb_state = TI_READ_URB_RUNNING;
1452 urb = tport->tp_port->read_urb;
1453 spin_unlock_irqrestore(&tport->tp_lock, flags);
1454 urb->context = tport;
1455 status = usb_submit_urb(urb, GFP_KERNEL);
1456 } else {
1457 tport->tp_read_urb_state = TI_READ_URB_RUNNING;
1458 spin_unlock_irqrestore(&tport->tp_lock, flags);
1459 }
1460
1461 return status;
1462 }
1463
ti_command_out_sync(struct usb_device * udev,u8 command,u16 moduleid,u16 value,void * data,int size)1464 static int ti_command_out_sync(struct usb_device *udev, u8 command,
1465 u16 moduleid, u16 value, void *data, int size)
1466 {
1467 int status;
1468
1469 status = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), command,
1470 USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT,
1471 value, moduleid, data, size, 1000);
1472 if (status < 0)
1473 return status;
1474
1475 return 0;
1476 }
1477
ti_command_in_sync(struct usb_device * udev,u8 command,u16 moduleid,u16 value,void * data,int size)1478 static int ti_command_in_sync(struct usb_device *udev, u8 command,
1479 u16 moduleid, u16 value, void *data, int size)
1480 {
1481 int status;
1482
1483 status = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), command,
1484 USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
1485 value, moduleid, data, size, 1000);
1486 if (status == size)
1487 status = 0;
1488 else if (status >= 0)
1489 status = -ECOMM;
1490
1491 return status;
1492 }
1493
ti_port_cmd_out(struct usb_serial_port * port,u8 command,u16 value,void * data,int size)1494 static int ti_port_cmd_out(struct usb_serial_port *port, u8 command,
1495 u16 value, void *data, int size)
1496 {
1497 return ti_command_out_sync(port->serial->dev, command,
1498 TI_UART1_PORT + port->port_number,
1499 value, data, size);
1500 }
1501
ti_port_cmd_in(struct usb_serial_port * port,u8 command,u16 value,void * data,int size)1502 static int ti_port_cmd_in(struct usb_serial_port *port, u8 command,
1503 u16 value, void *data, int size)
1504 {
1505 return ti_command_in_sync(port->serial->dev, command,
1506 TI_UART1_PORT + port->port_number,
1507 value, data, size);
1508 }
1509
ti_write_byte(struct usb_serial_port * port,struct ti_device * tdev,unsigned long addr,u8 mask,u8 byte)1510 static int ti_write_byte(struct usb_serial_port *port,
1511 struct ti_device *tdev, unsigned long addr,
1512 u8 mask, u8 byte)
1513 {
1514 int status;
1515 unsigned int size;
1516 struct ti_write_data_bytes *data;
1517
1518 dev_dbg(&port->dev, "%s - addr 0x%08lX, mask 0x%02X, byte 0x%02X\n", __func__,
1519 addr, mask, byte);
1520
1521 size = sizeof(struct ti_write_data_bytes) + 2;
1522 data = kmalloc(size, GFP_KERNEL);
1523 if (!data)
1524 return -ENOMEM;
1525
1526 data->bAddrType = TI_RW_DATA_ADDR_XDATA;
1527 data->bDataType = TI_RW_DATA_BYTE;
1528 data->bDataCounter = 1;
1529 data->wBaseAddrHi = cpu_to_be16(addr>>16);
1530 data->wBaseAddrLo = cpu_to_be16(addr);
1531 data->bData[0] = mask;
1532 data->bData[1] = byte;
1533
1534 status = ti_command_out_sync(port->serial->dev, TI_WRITE_DATA,
1535 TI_RAM_PORT, 0, data, size);
1536 if (status < 0)
1537 dev_err(&port->dev, "%s - failed, %d\n", __func__, status);
1538
1539 kfree(data);
1540
1541 return status;
1542 }
1543
ti_do_download(struct usb_device * dev,int pipe,u8 * buffer,int size)1544 static int ti_do_download(struct usb_device *dev, int pipe,
1545 u8 *buffer, int size)
1546 {
1547 int pos;
1548 u8 cs = 0;
1549 int done;
1550 struct ti_firmware_header *header;
1551 int status = 0;
1552 int len;
1553
1554 for (pos = sizeof(struct ti_firmware_header); pos < size; pos++)
1555 cs = (u8)(cs + buffer[pos]);
1556
1557 header = (struct ti_firmware_header *)buffer;
1558 header->wLength = cpu_to_le16(size - sizeof(*header));
1559 header->bCheckSum = cs;
1560
1561 dev_dbg(&dev->dev, "%s - downloading firmware\n", __func__);
1562 for (pos = 0; pos < size; pos += done) {
1563 len = min(size - pos, TI_DOWNLOAD_MAX_PACKET_SIZE);
1564 status = usb_bulk_msg(dev, pipe, buffer + pos, len,
1565 &done, 1000);
1566 if (status)
1567 break;
1568 }
1569 return status;
1570 }
1571
ti_download_firmware(struct ti_device * tdev)1572 static int ti_download_firmware(struct ti_device *tdev)
1573 {
1574 int status;
1575 int buffer_size;
1576 u8 *buffer;
1577 struct usb_device *dev = tdev->td_serial->dev;
1578 unsigned int pipe = usb_sndbulkpipe(dev,
1579 tdev->td_serial->port[0]->bulk_out_endpointAddress);
1580 const struct firmware *fw_p;
1581 char buf[32];
1582
1583 if (le16_to_cpu(dev->descriptor.idVendor) == MXU1_VENDOR_ID) {
1584 snprintf(buf,
1585 sizeof(buf),
1586 "moxa/moxa-%04x.fw",
1587 le16_to_cpu(dev->descriptor.idProduct));
1588
1589 status = request_firmware(&fw_p, buf, &dev->dev);
1590 goto check_firmware;
1591 }
1592
1593 /* try ID specific firmware first, then try generic firmware */
1594 sprintf(buf, "ti_usb-v%04x-p%04x.fw",
1595 le16_to_cpu(dev->descriptor.idVendor),
1596 le16_to_cpu(dev->descriptor.idProduct));
1597 status = request_firmware(&fw_p, buf, &dev->dev);
1598
1599 if (status != 0) {
1600 buf[0] = '\0';
1601 if (le16_to_cpu(dev->descriptor.idVendor) == MTS_VENDOR_ID) {
1602 switch (le16_to_cpu(dev->descriptor.idProduct)) {
1603 case MTS_CDMA_PRODUCT_ID:
1604 strcpy(buf, "mts_cdma.fw");
1605 break;
1606 case MTS_GSM_PRODUCT_ID:
1607 strcpy(buf, "mts_gsm.fw");
1608 break;
1609 case MTS_EDGE_PRODUCT_ID:
1610 strcpy(buf, "mts_edge.fw");
1611 break;
1612 case MTS_MT9234MU_PRODUCT_ID:
1613 strcpy(buf, "mts_mt9234mu.fw");
1614 break;
1615 case MTS_MT9234ZBA_PRODUCT_ID:
1616 strcpy(buf, "mts_mt9234zba.fw");
1617 break;
1618 case MTS_MT9234ZBAOLD_PRODUCT_ID:
1619 strcpy(buf, "mts_mt9234zba.fw");
1620 break; }
1621 }
1622 if (buf[0] == '\0') {
1623 if (tdev->td_is_3410)
1624 strcpy(buf, "ti_3410.fw");
1625 else
1626 strcpy(buf, "ti_5052.fw");
1627 }
1628 status = request_firmware(&fw_p, buf, &dev->dev);
1629 }
1630
1631 check_firmware:
1632 if (status) {
1633 dev_err(&dev->dev, "%s - firmware not found\n", __func__);
1634 return -ENOENT;
1635 }
1636 if (fw_p->size > TI_FIRMWARE_BUF_SIZE) {
1637 dev_err(&dev->dev, "%s - firmware too large %zu\n", __func__, fw_p->size);
1638 release_firmware(fw_p);
1639 return -ENOENT;
1640 }
1641
1642 buffer_size = TI_FIRMWARE_BUF_SIZE + sizeof(struct ti_firmware_header);
1643 buffer = kmalloc(buffer_size, GFP_KERNEL);
1644 if (buffer) {
1645 memcpy(buffer, fw_p->data, fw_p->size);
1646 memset(buffer + fw_p->size, 0xff, buffer_size - fw_p->size);
1647 status = ti_do_download(dev, pipe, buffer, fw_p->size);
1648 kfree(buffer);
1649 } else {
1650 status = -ENOMEM;
1651 }
1652 release_firmware(fw_p);
1653 if (status) {
1654 dev_err(&dev->dev, "%s - error downloading firmware, %d\n",
1655 __func__, status);
1656 return status;
1657 }
1658
1659 dev_dbg(&dev->dev, "%s - download successful\n", __func__);
1660
1661 return 0;
1662 }
1663