1 // SPDX-License-Identifier: GPL-1.0+
2 /*
3  * Renesas USB driver
4  *
5  * Copyright (C) 2011 Renesas Solutions Corp.
6  * Copyright (C) 2019 Renesas Electronics Corporation
7  * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
8  */
9 #include <linux/interrupt.h>
10 
11 #include "common.h"
12 #include "mod.h"
13 
14 /*
15  *		autonomy
16  *
17  * these functions are used if platform doesn't have external phy.
18  *  -> there is no "notify_hotplug" callback from platform
19  *  -> call "notify_hotplug" by itself
20  *  -> use own interrupt to connect/disconnect
21  *  -> it mean module clock is always ON
22  *             ~~~~~~~~~~~~~~~~~~~~~~~~~
23  */
usbhsm_autonomy_get_vbus(struct platform_device * pdev)24 static int usbhsm_autonomy_get_vbus(struct platform_device *pdev)
25 {
26 	struct usbhs_priv *priv = usbhs_pdev_to_priv(pdev);
27 
28 	return  VBSTS & usbhs_read(priv, INTSTS0);
29 }
30 
usbhsm_autonomy_irq_vbus(struct usbhs_priv * priv,struct usbhs_irq_state * irq_state)31 static int usbhsm_autonomy_irq_vbus(struct usbhs_priv *priv,
32 				    struct usbhs_irq_state *irq_state)
33 {
34 	struct platform_device *pdev = usbhs_priv_to_pdev(priv);
35 
36 	usbhsc_schedule_notify_hotplug(pdev);
37 
38 	return 0;
39 }
40 
usbhs_mod_autonomy_mode(struct usbhs_priv * priv)41 void usbhs_mod_autonomy_mode(struct usbhs_priv *priv)
42 {
43 	struct usbhs_mod_info *info = usbhs_priv_to_modinfo(priv);
44 
45 	info->irq_vbus = usbhsm_autonomy_irq_vbus;
46 	info->get_vbus = usbhsm_autonomy_get_vbus;
47 
48 	usbhs_irq_callback_update(priv, NULL);
49 }
50 
usbhs_mod_non_autonomy_mode(struct usbhs_priv * priv)51 void usbhs_mod_non_autonomy_mode(struct usbhs_priv *priv)
52 {
53 	struct usbhs_mod_info *info = usbhs_priv_to_modinfo(priv);
54 
55 	info->get_vbus = priv->pfunc->get_vbus;
56 }
57 
58 /*
59  *		host / gadget functions
60  *
61  * renesas_usbhs host/gadget can register itself by below functions.
62  * these functions are called when probe
63  *
64  */
usbhs_mod_register(struct usbhs_priv * priv,struct usbhs_mod * mod,int id)65 void usbhs_mod_register(struct usbhs_priv *priv, struct usbhs_mod *mod, int id)
66 {
67 	struct usbhs_mod_info *info = usbhs_priv_to_modinfo(priv);
68 
69 	info->mod[id]	= mod;
70 	mod->priv	= priv;
71 }
72 
usbhs_mod_get(struct usbhs_priv * priv,int id)73 struct usbhs_mod *usbhs_mod_get(struct usbhs_priv *priv, int id)
74 {
75 	struct usbhs_mod_info *info = usbhs_priv_to_modinfo(priv);
76 	struct usbhs_mod *ret = NULL;
77 
78 	switch (id) {
79 	case USBHS_HOST:
80 	case USBHS_GADGET:
81 		ret = info->mod[id];
82 		break;
83 	}
84 
85 	return ret;
86 }
87 
usbhs_mod_is_host(struct usbhs_priv * priv)88 int usbhs_mod_is_host(struct usbhs_priv *priv)
89 {
90 	struct usbhs_mod *mod = usbhs_mod_get_current(priv);
91 	struct usbhs_mod_info *info = usbhs_priv_to_modinfo(priv);
92 
93 	if (!mod)
94 		return -EINVAL;
95 
96 	return info->mod[USBHS_HOST] == mod;
97 }
98 
usbhs_mod_get_current(struct usbhs_priv * priv)99 struct usbhs_mod *usbhs_mod_get_current(struct usbhs_priv *priv)
100 {
101 	struct usbhs_mod_info *info = usbhs_priv_to_modinfo(priv);
102 
103 	return info->curt;
104 }
105 
usbhs_mod_change(struct usbhs_priv * priv,int id)106 int usbhs_mod_change(struct usbhs_priv *priv, int id)
107 {
108 	struct usbhs_mod_info *info = usbhs_priv_to_modinfo(priv);
109 	struct usbhs_mod *mod = NULL;
110 	int ret = 0;
111 
112 	/* id < 0 mean no current */
113 	switch (id) {
114 	case USBHS_HOST:
115 	case USBHS_GADGET:
116 		mod = info->mod[id];
117 		break;
118 	default:
119 		ret = -EINVAL;
120 	}
121 	info->curt = mod;
122 
123 	return ret;
124 }
125 
126 static irqreturn_t usbhs_interrupt(int irq, void *data);
usbhs_mod_probe(struct usbhs_priv * priv)127 int usbhs_mod_probe(struct usbhs_priv *priv)
128 {
129 	struct device *dev = usbhs_priv_to_dev(priv);
130 	int ret;
131 
132 	/*
133 	 * install host/gadget driver
134 	 */
135 	ret = usbhs_mod_host_probe(priv);
136 	if (ret < 0)
137 		return ret;
138 
139 	ret = usbhs_mod_gadget_probe(priv);
140 	if (ret < 0)
141 		goto mod_init_host_err;
142 
143 	/* irq settings */
144 	ret = devm_request_irq(dev, priv->irq, usbhs_interrupt,
145 			       0, dev_name(dev), priv);
146 	if (ret) {
147 		dev_err(dev, "irq request err\n");
148 		goto mod_init_gadget_err;
149 	}
150 
151 	return ret;
152 
153 mod_init_gadget_err:
154 	usbhs_mod_gadget_remove(priv);
155 mod_init_host_err:
156 	usbhs_mod_host_remove(priv);
157 
158 	return ret;
159 }
160 
usbhs_mod_remove(struct usbhs_priv * priv)161 void usbhs_mod_remove(struct usbhs_priv *priv)
162 {
163 	usbhs_mod_host_remove(priv);
164 	usbhs_mod_gadget_remove(priv);
165 }
166 
167 /*
168  *		status functions
169  */
usbhs_status_get_device_state(struct usbhs_irq_state * irq_state)170 int usbhs_status_get_device_state(struct usbhs_irq_state *irq_state)
171 {
172 	return (int)irq_state->intsts0 & DVSQ_MASK;
173 }
174 
usbhs_status_get_ctrl_stage(struct usbhs_irq_state * irq_state)175 int usbhs_status_get_ctrl_stage(struct usbhs_irq_state *irq_state)
176 {
177 	/*
178 	 * return value
179 	 *
180 	 * IDLE_SETUP_STAGE
181 	 * READ_DATA_STAGE
182 	 * READ_STATUS_STAGE
183 	 * WRITE_DATA_STAGE
184 	 * WRITE_STATUS_STAGE
185 	 * NODATA_STATUS_STAGE
186 	 * SEQUENCE_ERROR
187 	 */
188 	return (int)irq_state->intsts0 & CTSQ_MASK;
189 }
190 
usbhs_status_get_each_irq(struct usbhs_priv * priv,struct usbhs_irq_state * state)191 static int usbhs_status_get_each_irq(struct usbhs_priv *priv,
192 				     struct usbhs_irq_state *state)
193 {
194 	struct usbhs_mod *mod = usbhs_mod_get_current(priv);
195 	u16 intenb0, intenb1;
196 	unsigned long flags;
197 
198 	/********************  spin lock ********************/
199 	usbhs_lock(priv, flags);
200 	state->intsts0 = usbhs_read(priv, INTSTS0);
201 	intenb0 = usbhs_read(priv, INTENB0);
202 
203 	if (usbhs_mod_is_host(priv)) {
204 		state->intsts1 = usbhs_read(priv, INTSTS1);
205 		intenb1 = usbhs_read(priv, INTENB1);
206 	} else {
207 		state->intsts1 = intenb1 = 0;
208 	}
209 
210 	/* mask */
211 	if (mod) {
212 		state->brdysts = usbhs_read(priv, BRDYSTS);
213 		state->nrdysts = usbhs_read(priv, NRDYSTS);
214 		state->bempsts = usbhs_read(priv, BEMPSTS);
215 
216 		state->bempsts &= mod->irq_bempsts;
217 		state->brdysts &= mod->irq_brdysts;
218 	}
219 	usbhs_unlock(priv, flags);
220 	/********************  spin unlock ******************/
221 
222 	return 0;
223 }
224 
225 /*
226  *		interrupt
227  */
228 #define INTSTS0_MAGIC 0xF800 /* acknowledge magical interrupt sources */
229 #define INTSTS1_MAGIC 0xA870 /* acknowledge magical interrupt sources */
usbhs_interrupt(int irq,void * data)230 static irqreturn_t usbhs_interrupt(int irq, void *data)
231 {
232 	struct usbhs_priv *priv = data;
233 	struct usbhs_irq_state irq_state;
234 
235 	if (usbhs_status_get_each_irq(priv, &irq_state) < 0)
236 		return IRQ_NONE;
237 
238 	/*
239 	 * clear interrupt
240 	 *
241 	 * The hardware is _very_ picky to clear interrupt bit.
242 	 * Especially INTSTS0_MAGIC, INTSTS1_MAGIC value.
243 	 *
244 	 * see
245 	 *	"Operation"
246 	 *	 - "Control Transfer (DCP)"
247 	 *	   - Function :: VALID bit should 0
248 	 */
249 	usbhs_write(priv, INTSTS0, ~irq_state.intsts0 & INTSTS0_MAGIC);
250 	if (usbhs_mod_is_host(priv))
251 		usbhs_write(priv, INTSTS1, ~irq_state.intsts1 & INTSTS1_MAGIC);
252 
253 	/*
254 	 * The driver should not clear the xxxSTS after the line of
255 	 * "call irq callback functions" because each "if" statement is
256 	 * possible to call the callback function for avoiding any side effects.
257 	 */
258 	if (irq_state.intsts0 & BRDY)
259 		usbhs_write(priv, BRDYSTS, ~irq_state.brdysts);
260 	usbhs_write(priv, NRDYSTS, ~irq_state.nrdysts);
261 	if (irq_state.intsts0 & BEMP)
262 		usbhs_write(priv, BEMPSTS, ~irq_state.bempsts);
263 
264 	/*
265 	 * call irq callback functions
266 	 * see also
267 	 *	usbhs_irq_setting_update
268 	 */
269 
270 	/* INTSTS0 */
271 	if (irq_state.intsts0 & VBINT)
272 		usbhs_mod_info_call(priv, irq_vbus, priv, &irq_state);
273 
274 	if (irq_state.intsts0 & DVST)
275 		usbhs_mod_call(priv, irq_dev_state, priv, &irq_state);
276 
277 	if (irq_state.intsts0 & CTRT)
278 		usbhs_mod_call(priv, irq_ctrl_stage, priv, &irq_state);
279 
280 	if (irq_state.intsts0 & BEMP)
281 		usbhs_mod_call(priv, irq_empty, priv, &irq_state);
282 
283 	if (irq_state.intsts0 & BRDY)
284 		usbhs_mod_call(priv, irq_ready, priv, &irq_state);
285 
286 	if (usbhs_mod_is_host(priv)) {
287 		/* INTSTS1 */
288 		if (irq_state.intsts1 & ATTCH)
289 			usbhs_mod_call(priv, irq_attch, priv, &irq_state);
290 
291 		if (irq_state.intsts1 & DTCH)
292 			usbhs_mod_call(priv, irq_dtch, priv, &irq_state);
293 
294 		if (irq_state.intsts1 & SIGN)
295 			usbhs_mod_call(priv, irq_sign, priv, &irq_state);
296 
297 		if (irq_state.intsts1 & SACK)
298 			usbhs_mod_call(priv, irq_sack, priv, &irq_state);
299 	}
300 	return IRQ_HANDLED;
301 }
302 
usbhs_irq_callback_update(struct usbhs_priv * priv,struct usbhs_mod * mod)303 void usbhs_irq_callback_update(struct usbhs_priv *priv, struct usbhs_mod *mod)
304 {
305 	u16 intenb0 = 0;
306 	u16 intenb1 = 0;
307 	struct usbhs_mod_info *info = usbhs_priv_to_modinfo(priv);
308 
309 	/*
310 	 * BEMPENB/BRDYENB are picky.
311 	 * below method is required
312 	 *
313 	 *  - clear  INTSTS0
314 	 *  - update BEMPENB/BRDYENB
315 	 *  - update INTSTS0
316 	 */
317 	usbhs_write(priv, INTENB0, 0);
318 	if (usbhs_mod_is_host(priv))
319 		usbhs_write(priv, INTENB1, 0);
320 
321 	usbhs_write(priv, BEMPENB, 0);
322 	usbhs_write(priv, BRDYENB, 0);
323 
324 	/*
325 	 * see also
326 	 *	usbhs_interrupt
327 	 */
328 
329 	if (info->irq_vbus)
330 		intenb0 |= VBSE;
331 
332 	if (mod) {
333 		/*
334 		 * INTSTS0
335 		 */
336 		if (mod->irq_ctrl_stage)
337 			intenb0 |= CTRE;
338 
339 		if (mod->irq_dev_state)
340 			intenb0 |= DVSE;
341 
342 		if (mod->irq_empty && mod->irq_bempsts) {
343 			usbhs_write(priv, BEMPENB, mod->irq_bempsts);
344 			intenb0 |= BEMPE;
345 		}
346 
347 		if (mod->irq_ready && mod->irq_brdysts) {
348 			usbhs_write(priv, BRDYENB, mod->irq_brdysts);
349 			intenb0 |= BRDYE;
350 		}
351 
352 		if (usbhs_mod_is_host(priv)) {
353 			/*
354 			 * INTSTS1
355 			 */
356 			if (mod->irq_attch)
357 				intenb1 |= ATTCHE;
358 
359 			if (mod->irq_dtch)
360 				intenb1 |= DTCHE;
361 
362 			if (mod->irq_sign)
363 				intenb1 |= SIGNE;
364 
365 			if (mod->irq_sack)
366 				intenb1 |= SACKE;
367 		}
368 	}
369 
370 	if (intenb0)
371 		usbhs_write(priv, INTENB0, intenb0);
372 
373 	if (usbhs_mod_is_host(priv) && intenb1)
374 		usbhs_write(priv, INTENB1, intenb1);
375 }
376