1 // SPDX-License-Identifier: GPL-2.0
2 /*
3 * Copyright (c) 2017, 2019, The Linux Foundation. All rights reserved.
4 */
5
6 #include <linux/clk.h>
7 #include <linux/delay.h>
8 #include <linux/err.h>
9 #include <linux/io.h>
10 #include <linux/kernel.h>
11 #include <linux/mfd/syscon.h>
12 #include <linux/module.h>
13 #include <linux/nvmem-consumer.h>
14 #include <linux/of.h>
15 #include <linux/of_device.h>
16 #include <linux/phy/phy.h>
17 #include <linux/platform_device.h>
18 #include <linux/regmap.h>
19 #include <linux/regulator/consumer.h>
20 #include <linux/reset.h>
21 #include <linux/slab.h>
22
23 #include <dt-bindings/phy/phy-qcom-qusb2.h>
24
25 #define QUSB2PHY_PLL 0x0
26 #define QUSB2PHY_PLL_TEST 0x04
27 #define CLK_REF_SEL BIT(7)
28
29 #define QUSB2PHY_PLL_TUNE 0x08
30 #define QUSB2PHY_PLL_USER_CTL1 0x0c
31 #define QUSB2PHY_PLL_USER_CTL2 0x10
32 #define QUSB2PHY_PLL_AUTOPGM_CTL1 0x1c
33 #define QUSB2PHY_PLL_PWR_CTRL 0x18
34
35 /* QUSB2PHY_PLL_STATUS register bits */
36 #define PLL_LOCKED BIT(5)
37
38 /* QUSB2PHY_PLL_COMMON_STATUS_ONE register bits */
39 #define CORE_READY_STATUS BIT(0)
40
41 /* QUSB2PHY_PORT_POWERDOWN register bits */
42 #define CLAMP_N_EN BIT(5)
43 #define FREEZIO_N BIT(1)
44 #define POWER_DOWN BIT(0)
45
46 /* QUSB2PHY_PWR_CTRL1 register bits */
47 #define PWR_CTRL1_VREF_SUPPLY_TRIM BIT(5)
48 #define PWR_CTRL1_CLAMP_N_EN BIT(1)
49
50 #define QUSB2PHY_REFCLK_ENABLE BIT(0)
51
52 #define PHY_CLK_SCHEME_SEL BIT(0)
53
54 /* QUSB2PHY_INTR_CTRL register bits */
55 #define DMSE_INTR_HIGH_SEL BIT(4)
56 #define DPSE_INTR_HIGH_SEL BIT(3)
57 #define CHG_DET_INTR_EN BIT(2)
58 #define DMSE_INTR_EN BIT(1)
59 #define DPSE_INTR_EN BIT(0)
60
61 /* QUSB2PHY_PLL_CORE_INPUT_OVERRIDE register bits */
62 #define CORE_PLL_EN_FROM_RESET BIT(4)
63 #define CORE_RESET BIT(5)
64 #define CORE_RESET_MUX BIT(6)
65
66 /* QUSB2PHY_IMP_CTRL1 register bits */
67 #define IMP_RES_OFFSET_MASK GENMASK(5, 0)
68 #define IMP_RES_OFFSET_SHIFT 0x0
69
70 /* QUSB2PHY_PLL_BIAS_CONTROL_2 register bits */
71 #define BIAS_CTRL2_RES_OFFSET_MASK GENMASK(5, 0)
72 #define BIAS_CTRL2_RES_OFFSET_SHIFT 0x0
73
74 /* QUSB2PHY_CHG_CONTROL_2 register bits */
75 #define CHG_CTRL2_OFFSET_MASK GENMASK(5, 4)
76 #define CHG_CTRL2_OFFSET_SHIFT 0x4
77
78 /* QUSB2PHY_PORT_TUNE1 register bits */
79 #define HSTX_TRIM_MASK GENMASK(7, 4)
80 #define HSTX_TRIM_SHIFT 0x4
81 #define PREEMPH_WIDTH_HALF_BIT BIT(2)
82 #define PREEMPHASIS_EN_MASK GENMASK(1, 0)
83 #define PREEMPHASIS_EN_SHIFT 0x0
84
85 /* QUSB2PHY_PORT_TUNE2 register bits */
86 #define HSDISC_TRIM_MASK GENMASK(1, 0)
87 #define HSDISC_TRIM_SHIFT 0x0
88
89 #define QUSB2PHY_PLL_ANALOG_CONTROLS_TWO 0x04
90 #define QUSB2PHY_PLL_CLOCK_INVERTERS 0x18c
91 #define QUSB2PHY_PLL_CMODE 0x2c
92 #define QUSB2PHY_PLL_LOCK_DELAY 0x184
93 #define QUSB2PHY_PLL_DIGITAL_TIMERS_TWO 0xb4
94 #define QUSB2PHY_PLL_BIAS_CONTROL_1 0x194
95 #define QUSB2PHY_PLL_BIAS_CONTROL_2 0x198
96 #define QUSB2PHY_PWR_CTRL2 0x214
97 #define QUSB2PHY_IMP_CTRL1 0x220
98 #define QUSB2PHY_IMP_CTRL2 0x224
99 #define QUSB2PHY_CHG_CTRL2 0x23c
100
101 struct qusb2_phy_init_tbl {
102 unsigned int offset;
103 unsigned int val;
104 /*
105 * register part of layout ?
106 * if yes, then offset gives index in the reg-layout
107 */
108 int in_layout;
109 };
110
111 #define QUSB2_PHY_INIT_CFG(o, v) \
112 { \
113 .offset = o, \
114 .val = v, \
115 }
116
117 #define QUSB2_PHY_INIT_CFG_L(o, v) \
118 { \
119 .offset = o, \
120 .val = v, \
121 .in_layout = 1, \
122 }
123
124 /* set of registers with offsets different per-PHY */
125 enum qusb2phy_reg_layout {
126 QUSB2PHY_PLL_CORE_INPUT_OVERRIDE,
127 QUSB2PHY_PLL_STATUS,
128 QUSB2PHY_PORT_TUNE1,
129 QUSB2PHY_PORT_TUNE2,
130 QUSB2PHY_PORT_TUNE3,
131 QUSB2PHY_PORT_TUNE4,
132 QUSB2PHY_PORT_TUNE5,
133 QUSB2PHY_PORT_TEST1,
134 QUSB2PHY_PORT_TEST2,
135 QUSB2PHY_PORT_POWERDOWN,
136 QUSB2PHY_INTR_CTRL,
137 };
138
139 static const struct qusb2_phy_init_tbl ipq6018_init_tbl[] = {
140 QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL, 0x14),
141 QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE1, 0xF8),
142 QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE2, 0xB3),
143 QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE3, 0x83),
144 QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE4, 0xC0),
145 QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_TUNE, 0x30),
146 QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_USER_CTL1, 0x79),
147 QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_USER_CTL2, 0x21),
148 QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE5, 0x00),
149 QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_PWR_CTRL, 0x00),
150 QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TEST2, 0x14),
151 QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_TEST, 0x80),
152 QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_AUTOPGM_CTL1, 0x9F),
153 };
154
155 static const unsigned int ipq6018_regs_layout[] = {
156 [QUSB2PHY_PLL_STATUS] = 0x38,
157 [QUSB2PHY_PORT_TUNE1] = 0x80,
158 [QUSB2PHY_PORT_TUNE2] = 0x84,
159 [QUSB2PHY_PORT_TUNE3] = 0x88,
160 [QUSB2PHY_PORT_TUNE4] = 0x8C,
161 [QUSB2PHY_PORT_TUNE5] = 0x90,
162 [QUSB2PHY_PORT_TEST1] = 0x98,
163 [QUSB2PHY_PORT_TEST2] = 0x9C,
164 [QUSB2PHY_PORT_POWERDOWN] = 0xB4,
165 [QUSB2PHY_INTR_CTRL] = 0xBC,
166 };
167
168 static const unsigned int msm8996_regs_layout[] = {
169 [QUSB2PHY_PLL_STATUS] = 0x38,
170 [QUSB2PHY_PORT_TUNE1] = 0x80,
171 [QUSB2PHY_PORT_TUNE2] = 0x84,
172 [QUSB2PHY_PORT_TUNE3] = 0x88,
173 [QUSB2PHY_PORT_TUNE4] = 0x8c,
174 [QUSB2PHY_PORT_TUNE5] = 0x90,
175 [QUSB2PHY_PORT_TEST1] = 0xb8,
176 [QUSB2PHY_PORT_TEST2] = 0x9c,
177 [QUSB2PHY_PORT_POWERDOWN] = 0xb4,
178 [QUSB2PHY_INTR_CTRL] = 0xbc,
179 };
180
181 static const struct qusb2_phy_init_tbl msm8996_init_tbl[] = {
182 QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE1, 0xf8),
183 QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE2, 0xb3),
184 QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE3, 0x83),
185 QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE4, 0xc0),
186
187 QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_TUNE, 0x30),
188 QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_USER_CTL1, 0x79),
189 QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_USER_CTL2, 0x21),
190
191 QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TEST2, 0x14),
192
193 QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_AUTOPGM_CTL1, 0x9f),
194 QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_PWR_CTRL, 0x00),
195 };
196
197 static const unsigned int msm8998_regs_layout[] = {
198 [QUSB2PHY_PLL_CORE_INPUT_OVERRIDE] = 0xa8,
199 [QUSB2PHY_PLL_STATUS] = 0x1a0,
200 [QUSB2PHY_PORT_TUNE1] = 0x23c,
201 [QUSB2PHY_PORT_TUNE2] = 0x240,
202 [QUSB2PHY_PORT_TUNE3] = 0x244,
203 [QUSB2PHY_PORT_TUNE4] = 0x248,
204 [QUSB2PHY_PORT_TEST1] = 0x24c,
205 [QUSB2PHY_PORT_TEST2] = 0x250,
206 [QUSB2PHY_PORT_POWERDOWN] = 0x210,
207 [QUSB2PHY_INTR_CTRL] = 0x22c,
208 };
209
210 static const struct qusb2_phy_init_tbl msm8998_init_tbl[] = {
211 QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_ANALOG_CONTROLS_TWO, 0x13),
212 QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_CLOCK_INVERTERS, 0x7c),
213 QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_CMODE, 0x80),
214 QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_LOCK_DELAY, 0x0a),
215
216 QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE1, 0xa5),
217 QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE2, 0x09),
218
219 QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_DIGITAL_TIMERS_TWO, 0x19),
220 };
221
222 static const struct qusb2_phy_init_tbl sm6115_init_tbl[] = {
223 QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE1, 0xf8),
224 QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE2, 0x53),
225 QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE3, 0x81),
226 QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE4, 0x17),
227
228 QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_TUNE, 0x30),
229 QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_USER_CTL1, 0x79),
230 QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_USER_CTL2, 0x21),
231
232 QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TEST2, 0x14),
233
234 QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_AUTOPGM_CTL1, 0x9f),
235 QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_PWR_CTRL, 0x00),
236 };
237
238 static const unsigned int qusb2_v2_regs_layout[] = {
239 [QUSB2PHY_PLL_CORE_INPUT_OVERRIDE] = 0xa8,
240 [QUSB2PHY_PLL_STATUS] = 0x1a0,
241 [QUSB2PHY_PORT_TUNE1] = 0x240,
242 [QUSB2PHY_PORT_TUNE2] = 0x244,
243 [QUSB2PHY_PORT_TUNE3] = 0x248,
244 [QUSB2PHY_PORT_TUNE4] = 0x24c,
245 [QUSB2PHY_PORT_TUNE5] = 0x250,
246 [QUSB2PHY_PORT_TEST1] = 0x254,
247 [QUSB2PHY_PORT_TEST2] = 0x258,
248 [QUSB2PHY_PORT_POWERDOWN] = 0x210,
249 [QUSB2PHY_INTR_CTRL] = 0x230,
250 };
251
252 static const struct qusb2_phy_init_tbl qusb2_v2_init_tbl[] = {
253 QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_ANALOG_CONTROLS_TWO, 0x03),
254 QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_CLOCK_INVERTERS, 0x7c),
255 QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_CMODE, 0x80),
256 QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_LOCK_DELAY, 0x0a),
257 QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_DIGITAL_TIMERS_TWO, 0x19),
258 QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_BIAS_CONTROL_1, 0x40),
259 QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_BIAS_CONTROL_2, 0x20),
260 QUSB2_PHY_INIT_CFG(QUSB2PHY_PWR_CTRL2, 0x21),
261 QUSB2_PHY_INIT_CFG(QUSB2PHY_IMP_CTRL1, 0x0),
262 QUSB2_PHY_INIT_CFG(QUSB2PHY_IMP_CTRL2, 0x58),
263
264 QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE1, 0x30),
265 QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE2, 0x29),
266 QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE3, 0xca),
267 QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE4, 0x04),
268 QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE5, 0x03),
269
270 QUSB2_PHY_INIT_CFG(QUSB2PHY_CHG_CTRL2, 0x0),
271 };
272
273 struct qusb2_phy_cfg {
274 const struct qusb2_phy_init_tbl *tbl;
275 /* number of entries in the table */
276 unsigned int tbl_num;
277 /* offset to PHY_CLK_SCHEME register in TCSR map */
278 unsigned int clk_scheme_offset;
279
280 /* array of registers with different offsets */
281 const unsigned int *regs;
282 unsigned int mask_core_ready;
283 unsigned int disable_ctrl;
284 unsigned int autoresume_en;
285
286 /* true if PHY has PLL_TEST register to select clk_scheme */
287 bool has_pll_test;
288
289 /* true if TUNE1 register must be updated by fused value, else TUNE2 */
290 bool update_tune1_with_efuse;
291
292 /* true if PHY has PLL_CORE_INPUT_OVERRIDE register to reset PLL */
293 bool has_pll_override;
294
295 /* true if PHY default clk scheme is single-ended */
296 bool se_clk_scheme_default;
297 };
298
299 static const struct qusb2_phy_cfg msm8996_phy_cfg = {
300 .tbl = msm8996_init_tbl,
301 .tbl_num = ARRAY_SIZE(msm8996_init_tbl),
302 .regs = msm8996_regs_layout,
303
304 .has_pll_test = true,
305 .se_clk_scheme_default = true,
306 .disable_ctrl = (CLAMP_N_EN | FREEZIO_N | POWER_DOWN),
307 .mask_core_ready = PLL_LOCKED,
308 .autoresume_en = BIT(3),
309 };
310
311 static const struct qusb2_phy_cfg msm8998_phy_cfg = {
312 .tbl = msm8998_init_tbl,
313 .tbl_num = ARRAY_SIZE(msm8998_init_tbl),
314 .regs = msm8998_regs_layout,
315
316 .disable_ctrl = POWER_DOWN,
317 .mask_core_ready = CORE_READY_STATUS,
318 .has_pll_override = true,
319 .se_clk_scheme_default = true,
320 .autoresume_en = BIT(0),
321 .update_tune1_with_efuse = true,
322 };
323
324 static const struct qusb2_phy_cfg ipq6018_phy_cfg = {
325 .tbl = ipq6018_init_tbl,
326 .tbl_num = ARRAY_SIZE(ipq6018_init_tbl),
327 .regs = ipq6018_regs_layout,
328
329 .disable_ctrl = POWER_DOWN,
330 .mask_core_ready = PLL_LOCKED,
331 /* autoresume not used */
332 .autoresume_en = BIT(0),
333 };
334
335 static const struct qusb2_phy_cfg qusb2_v2_phy_cfg = {
336 .tbl = qusb2_v2_init_tbl,
337 .tbl_num = ARRAY_SIZE(qusb2_v2_init_tbl),
338 .regs = qusb2_v2_regs_layout,
339
340 .disable_ctrl = (PWR_CTRL1_VREF_SUPPLY_TRIM | PWR_CTRL1_CLAMP_N_EN |
341 POWER_DOWN),
342 .mask_core_ready = CORE_READY_STATUS,
343 .has_pll_override = true,
344 .se_clk_scheme_default = true,
345 .autoresume_en = BIT(0),
346 .update_tune1_with_efuse = true,
347 };
348
349 static const struct qusb2_phy_cfg sdm660_phy_cfg = {
350 .tbl = msm8996_init_tbl,
351 .tbl_num = ARRAY_SIZE(msm8996_init_tbl),
352 .regs = msm8996_regs_layout,
353
354 .has_pll_test = true,
355 .se_clk_scheme_default = false,
356 .disable_ctrl = (CLAMP_N_EN | FREEZIO_N | POWER_DOWN),
357 .mask_core_ready = PLL_LOCKED,
358 .autoresume_en = BIT(3),
359 };
360
361 static const struct qusb2_phy_cfg sm6115_phy_cfg = {
362 .tbl = sm6115_init_tbl,
363 .tbl_num = ARRAY_SIZE(sm6115_init_tbl),
364 .regs = msm8996_regs_layout,
365
366 .has_pll_test = true,
367 .se_clk_scheme_default = true,
368 .disable_ctrl = (CLAMP_N_EN | FREEZIO_N | POWER_DOWN),
369 .mask_core_ready = PLL_LOCKED,
370 .autoresume_en = BIT(3),
371 };
372
373 static const char * const qusb2_phy_vreg_names[] = {
374 "vdd", "vdda-pll", "vdda-phy-dpdm",
375 };
376
377 #define QUSB2_NUM_VREGS ARRAY_SIZE(qusb2_phy_vreg_names)
378
379 /* struct override_param - structure holding qusb2 v2 phy overriding param
380 * set override true if the device tree property exists and read and assign
381 * to value
382 */
383 struct override_param {
384 bool override;
385 u8 value;
386 };
387
388 /*struct override_params - structure holding qusb2 v2 phy overriding params
389 * @imp_res_offset: rescode offset to be updated in IMP_CTRL1 register
390 * @hstx_trim: HSTX_TRIM to be updated in TUNE1 register
391 * @preemphasis: Amplitude Pre-Emphasis to be updated in TUNE1 register
392 * @preemphasis_width: half/full-width Pre-Emphasis updated via TUNE1
393 * @bias_ctrl: bias ctrl to be updated in BIAS_CONTROL_2 register
394 * @charge_ctrl: charge ctrl to be updated in CHG_CTRL2 register
395 * @hsdisc_trim: disconnect threshold to be updated in TUNE2 register
396 */
397 struct override_params {
398 struct override_param imp_res_offset;
399 struct override_param hstx_trim;
400 struct override_param preemphasis;
401 struct override_param preemphasis_width;
402 struct override_param bias_ctrl;
403 struct override_param charge_ctrl;
404 struct override_param hsdisc_trim;
405 };
406
407 /**
408 * struct qusb2_phy - structure holding qusb2 phy attributes
409 *
410 * @phy: generic phy
411 * @base: iomapped memory space for qubs2 phy
412 *
413 * @cfg_ahb_clk: AHB2PHY interface clock
414 * @ref_clk: phy reference clock
415 * @iface_clk: phy interface clock
416 * @phy_reset: phy reset control
417 * @vregs: regulator supplies bulk data
418 *
419 * @tcsr: TCSR syscon register map
420 * @cell: nvmem cell containing phy tuning value
421 *
422 * @overrides: pointer to structure for all overriding tuning params
423 *
424 * @cfg: phy config data
425 * @has_se_clk_scheme: indicate if PHY has single-ended ref clock scheme
426 * @phy_initialized: indicate if PHY has been initialized
427 * @mode: current PHY mode
428 */
429 struct qusb2_phy {
430 struct phy *phy;
431 void __iomem *base;
432
433 struct clk *cfg_ahb_clk;
434 struct clk *ref_clk;
435 struct clk *iface_clk;
436 struct reset_control *phy_reset;
437 struct regulator_bulk_data vregs[QUSB2_NUM_VREGS];
438
439 struct regmap *tcsr;
440 struct nvmem_cell *cell;
441
442 struct override_params overrides;
443
444 const struct qusb2_phy_cfg *cfg;
445 bool has_se_clk_scheme;
446 bool phy_initialized;
447 enum phy_mode mode;
448 };
449
qusb2_write_mask(void __iomem * base,u32 offset,u32 val,u32 mask)450 static inline void qusb2_write_mask(void __iomem *base, u32 offset,
451 u32 val, u32 mask)
452 {
453 u32 reg;
454
455 reg = readl(base + offset);
456 reg &= ~mask;
457 reg |= val & mask;
458 writel(reg, base + offset);
459
460 /* Ensure above write is completed */
461 readl(base + offset);
462 }
463
qusb2_setbits(void __iomem * base,u32 offset,u32 val)464 static inline void qusb2_setbits(void __iomem *base, u32 offset, u32 val)
465 {
466 u32 reg;
467
468 reg = readl(base + offset);
469 reg |= val;
470 writel(reg, base + offset);
471
472 /* Ensure above write is completed */
473 readl(base + offset);
474 }
475
qusb2_clrbits(void __iomem * base,u32 offset,u32 val)476 static inline void qusb2_clrbits(void __iomem *base, u32 offset, u32 val)
477 {
478 u32 reg;
479
480 reg = readl(base + offset);
481 reg &= ~val;
482 writel(reg, base + offset);
483
484 /* Ensure above write is completed */
485 readl(base + offset);
486 }
487
488 static inline
qcom_qusb2_phy_configure(void __iomem * base,const unsigned int * regs,const struct qusb2_phy_init_tbl tbl[],int num)489 void qcom_qusb2_phy_configure(void __iomem *base,
490 const unsigned int *regs,
491 const struct qusb2_phy_init_tbl tbl[], int num)
492 {
493 int i;
494
495 for (i = 0; i < num; i++) {
496 if (tbl[i].in_layout)
497 writel(tbl[i].val, base + regs[tbl[i].offset]);
498 else
499 writel(tbl[i].val, base + tbl[i].offset);
500 }
501 }
502
503 /*
504 * Update board specific PHY tuning override values if specified from
505 * device tree.
506 */
qusb2_phy_override_phy_params(struct qusb2_phy * qphy)507 static void qusb2_phy_override_phy_params(struct qusb2_phy *qphy)
508 {
509 const struct qusb2_phy_cfg *cfg = qphy->cfg;
510 struct override_params *or = &qphy->overrides;
511
512 if (or->imp_res_offset.override)
513 qusb2_write_mask(qphy->base, QUSB2PHY_IMP_CTRL1,
514 or->imp_res_offset.value << IMP_RES_OFFSET_SHIFT,
515 IMP_RES_OFFSET_MASK);
516
517 if (or->bias_ctrl.override)
518 qusb2_write_mask(qphy->base, QUSB2PHY_PLL_BIAS_CONTROL_2,
519 or->bias_ctrl.value << BIAS_CTRL2_RES_OFFSET_SHIFT,
520 BIAS_CTRL2_RES_OFFSET_MASK);
521
522 if (or->charge_ctrl.override)
523 qusb2_write_mask(qphy->base, QUSB2PHY_CHG_CTRL2,
524 or->charge_ctrl.value << CHG_CTRL2_OFFSET_SHIFT,
525 CHG_CTRL2_OFFSET_MASK);
526
527 if (or->hstx_trim.override)
528 qusb2_write_mask(qphy->base, cfg->regs[QUSB2PHY_PORT_TUNE1],
529 or->hstx_trim.value << HSTX_TRIM_SHIFT,
530 HSTX_TRIM_MASK);
531
532 if (or->preemphasis.override)
533 qusb2_write_mask(qphy->base, cfg->regs[QUSB2PHY_PORT_TUNE1],
534 or->preemphasis.value << PREEMPHASIS_EN_SHIFT,
535 PREEMPHASIS_EN_MASK);
536
537 if (or->preemphasis_width.override) {
538 if (or->preemphasis_width.value ==
539 QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT)
540 qusb2_setbits(qphy->base,
541 cfg->regs[QUSB2PHY_PORT_TUNE1],
542 PREEMPH_WIDTH_HALF_BIT);
543 else
544 qusb2_clrbits(qphy->base,
545 cfg->regs[QUSB2PHY_PORT_TUNE1],
546 PREEMPH_WIDTH_HALF_BIT);
547 }
548
549 if (or->hsdisc_trim.override)
550 qusb2_write_mask(qphy->base, cfg->regs[QUSB2PHY_PORT_TUNE2],
551 or->hsdisc_trim.value << HSDISC_TRIM_SHIFT,
552 HSDISC_TRIM_MASK);
553 }
554
555 /*
556 * Fetches HS Tx tuning value from nvmem and sets the
557 * QUSB2PHY_PORT_TUNE1/2 register.
558 * For error case, skip setting the value and use the default value.
559 */
qusb2_phy_set_tune2_param(struct qusb2_phy * qphy)560 static void qusb2_phy_set_tune2_param(struct qusb2_phy *qphy)
561 {
562 struct device *dev = &qphy->phy->dev;
563 const struct qusb2_phy_cfg *cfg = qphy->cfg;
564 u8 *val, hstx_trim;
565
566 /* efuse register is optional */
567 if (!qphy->cell)
568 return;
569
570 /*
571 * Read efuse register having TUNE2/1 parameter's high nibble.
572 * If efuse register shows value as 0x0 (indicating value is not
573 * fused), or if we fail to find a valid efuse register setting,
574 * then use default value for high nibble that we have already
575 * set while configuring the phy.
576 */
577 val = nvmem_cell_read(qphy->cell, NULL);
578 if (IS_ERR(val)) {
579 dev_dbg(dev, "failed to read a valid hs-tx trim value\n");
580 return;
581 }
582 hstx_trim = val[0];
583 kfree(val);
584 if (!hstx_trim) {
585 dev_dbg(dev, "failed to read a valid hs-tx trim value\n");
586 return;
587 }
588
589 /* Fused TUNE1/2 value is the higher nibble only */
590 if (cfg->update_tune1_with_efuse)
591 qusb2_write_mask(qphy->base, cfg->regs[QUSB2PHY_PORT_TUNE1],
592 hstx_trim << HSTX_TRIM_SHIFT, HSTX_TRIM_MASK);
593 else
594 qusb2_write_mask(qphy->base, cfg->regs[QUSB2PHY_PORT_TUNE2],
595 hstx_trim << HSTX_TRIM_SHIFT, HSTX_TRIM_MASK);
596 }
597
qusb2_phy_set_mode(struct phy * phy,enum phy_mode mode,int submode)598 static int qusb2_phy_set_mode(struct phy *phy,
599 enum phy_mode mode, int submode)
600 {
601 struct qusb2_phy *qphy = phy_get_drvdata(phy);
602
603 qphy->mode = mode;
604
605 return 0;
606 }
607
qusb2_phy_runtime_suspend(struct device * dev)608 static int __maybe_unused qusb2_phy_runtime_suspend(struct device *dev)
609 {
610 struct qusb2_phy *qphy = dev_get_drvdata(dev);
611 const struct qusb2_phy_cfg *cfg = qphy->cfg;
612 u32 intr_mask;
613
614 dev_vdbg(dev, "Suspending QUSB2 Phy, mode:%d\n", qphy->mode);
615
616 if (!qphy->phy_initialized) {
617 dev_vdbg(dev, "PHY not initialized, bailing out\n");
618 return 0;
619 }
620
621 /*
622 * Enable DP/DM interrupts to detect line state changes based on current
623 * speed. In other words, enable the triggers _opposite_ of what the
624 * current D+/D- levels are e.g. if currently D+ high, D- low
625 * (HS 'J'/Suspend), configure the mask to trigger on D+ low OR D- high
626 */
627 intr_mask = DPSE_INTR_EN | DMSE_INTR_EN;
628 switch (qphy->mode) {
629 case PHY_MODE_USB_HOST_HS:
630 case PHY_MODE_USB_HOST_FS:
631 case PHY_MODE_USB_DEVICE_HS:
632 case PHY_MODE_USB_DEVICE_FS:
633 intr_mask |= DMSE_INTR_HIGH_SEL;
634 break;
635 case PHY_MODE_USB_HOST_LS:
636 case PHY_MODE_USB_DEVICE_LS:
637 intr_mask |= DPSE_INTR_HIGH_SEL;
638 break;
639 default:
640 /* No device connected, enable both DP/DM high interrupt */
641 intr_mask |= DMSE_INTR_HIGH_SEL;
642 intr_mask |= DPSE_INTR_HIGH_SEL;
643 break;
644 }
645
646 writel(intr_mask, qphy->base + cfg->regs[QUSB2PHY_INTR_CTRL]);
647
648 /* hold core PLL into reset */
649 if (cfg->has_pll_override) {
650 qusb2_setbits(qphy->base,
651 cfg->regs[QUSB2PHY_PLL_CORE_INPUT_OVERRIDE],
652 CORE_PLL_EN_FROM_RESET | CORE_RESET |
653 CORE_RESET_MUX);
654 }
655
656 /* enable phy auto-resume only if device is connected on bus */
657 if (qphy->mode != PHY_MODE_INVALID) {
658 qusb2_setbits(qphy->base, cfg->regs[QUSB2PHY_PORT_TEST1],
659 cfg->autoresume_en);
660 /* Autoresume bit has to be toggled in order to enable it */
661 qusb2_clrbits(qphy->base, cfg->regs[QUSB2PHY_PORT_TEST1],
662 cfg->autoresume_en);
663 }
664
665 if (!qphy->has_se_clk_scheme)
666 clk_disable_unprepare(qphy->ref_clk);
667
668 clk_disable_unprepare(qphy->cfg_ahb_clk);
669 clk_disable_unprepare(qphy->iface_clk);
670
671 return 0;
672 }
673
qusb2_phy_runtime_resume(struct device * dev)674 static int __maybe_unused qusb2_phy_runtime_resume(struct device *dev)
675 {
676 struct qusb2_phy *qphy = dev_get_drvdata(dev);
677 const struct qusb2_phy_cfg *cfg = qphy->cfg;
678 int ret;
679
680 dev_vdbg(dev, "Resuming QUSB2 phy, mode:%d\n", qphy->mode);
681
682 if (!qphy->phy_initialized) {
683 dev_vdbg(dev, "PHY not initialized, bailing out\n");
684 return 0;
685 }
686
687 ret = clk_prepare_enable(qphy->iface_clk);
688 if (ret) {
689 dev_err(dev, "failed to enable iface_clk, %d\n", ret);
690 return ret;
691 }
692
693 ret = clk_prepare_enable(qphy->cfg_ahb_clk);
694 if (ret) {
695 dev_err(dev, "failed to enable cfg ahb clock, %d\n", ret);
696 goto disable_iface_clk;
697 }
698
699 if (!qphy->has_se_clk_scheme) {
700 ret = clk_prepare_enable(qphy->ref_clk);
701 if (ret) {
702 dev_err(dev, "failed to enable ref clk, %d\n", ret);
703 goto disable_ahb_clk;
704 }
705 }
706
707 writel(0x0, qphy->base + cfg->regs[QUSB2PHY_INTR_CTRL]);
708
709 /* bring core PLL out of reset */
710 if (cfg->has_pll_override) {
711 qusb2_clrbits(qphy->base,
712 cfg->regs[QUSB2PHY_PLL_CORE_INPUT_OVERRIDE],
713 CORE_RESET | CORE_RESET_MUX);
714 }
715
716 return 0;
717
718 disable_ahb_clk:
719 clk_disable_unprepare(qphy->cfg_ahb_clk);
720 disable_iface_clk:
721 clk_disable_unprepare(qphy->iface_clk);
722
723 return ret;
724 }
725
qusb2_phy_init(struct phy * phy)726 static int qusb2_phy_init(struct phy *phy)
727 {
728 struct qusb2_phy *qphy = phy_get_drvdata(phy);
729 const struct qusb2_phy_cfg *cfg = qphy->cfg;
730 unsigned int val = 0;
731 unsigned int clk_scheme;
732 int ret;
733
734 dev_vdbg(&phy->dev, "%s(): Initializing QUSB2 phy\n", __func__);
735
736 /* turn on regulator supplies */
737 ret = regulator_bulk_enable(ARRAY_SIZE(qphy->vregs), qphy->vregs);
738 if (ret)
739 return ret;
740
741 ret = clk_prepare_enable(qphy->iface_clk);
742 if (ret) {
743 dev_err(&phy->dev, "failed to enable iface_clk, %d\n", ret);
744 goto poweroff_phy;
745 }
746
747 /* enable ahb interface clock to program phy */
748 ret = clk_prepare_enable(qphy->cfg_ahb_clk);
749 if (ret) {
750 dev_err(&phy->dev, "failed to enable cfg ahb clock, %d\n", ret);
751 goto disable_iface_clk;
752 }
753
754 /* Perform phy reset */
755 ret = reset_control_assert(qphy->phy_reset);
756 if (ret) {
757 dev_err(&phy->dev, "failed to assert phy_reset, %d\n", ret);
758 goto disable_ahb_clk;
759 }
760
761 /* 100 us delay to keep PHY in reset mode */
762 usleep_range(100, 150);
763
764 ret = reset_control_deassert(qphy->phy_reset);
765 if (ret) {
766 dev_err(&phy->dev, "failed to de-assert phy_reset, %d\n", ret);
767 goto disable_ahb_clk;
768 }
769
770 /* Disable the PHY */
771 qusb2_setbits(qphy->base, cfg->regs[QUSB2PHY_PORT_POWERDOWN],
772 qphy->cfg->disable_ctrl);
773
774 if (cfg->has_pll_test) {
775 /* save reset value to override reference clock scheme later */
776 val = readl(qphy->base + QUSB2PHY_PLL_TEST);
777 }
778
779 qcom_qusb2_phy_configure(qphy->base, cfg->regs, cfg->tbl,
780 cfg->tbl_num);
781
782 /* Override board specific PHY tuning values */
783 qusb2_phy_override_phy_params(qphy);
784
785 /* Set efuse value for tuning the PHY */
786 qusb2_phy_set_tune2_param(qphy);
787
788 /* Enable the PHY */
789 qusb2_clrbits(qphy->base, cfg->regs[QUSB2PHY_PORT_POWERDOWN],
790 POWER_DOWN);
791
792 /* Required to get phy pll lock successfully */
793 usleep_range(150, 160);
794
795 /*
796 * Not all the SoCs have got a readable TCSR_PHY_CLK_SCHEME
797 * register in the TCSR so, if there's none, use the default
798 * value hardcoded in the configuration.
799 */
800 qphy->has_se_clk_scheme = cfg->se_clk_scheme_default;
801
802 /*
803 * read TCSR_PHY_CLK_SCHEME register to check if single-ended
804 * clock scheme is selected. If yes, then disable differential
805 * ref_clk and use single-ended clock, otherwise use differential
806 * ref_clk only.
807 */
808 if (qphy->tcsr) {
809 ret = regmap_read(qphy->tcsr, qphy->cfg->clk_scheme_offset,
810 &clk_scheme);
811 if (ret) {
812 dev_err(&phy->dev, "failed to read clk scheme reg\n");
813 goto assert_phy_reset;
814 }
815
816 /* is it a differential clock scheme ? */
817 if (!(clk_scheme & PHY_CLK_SCHEME_SEL)) {
818 dev_vdbg(&phy->dev, "%s(): select differential clk\n",
819 __func__);
820 qphy->has_se_clk_scheme = false;
821 } else {
822 dev_vdbg(&phy->dev, "%s(): select single-ended clk\n",
823 __func__);
824 }
825 }
826
827 if (!qphy->has_se_clk_scheme) {
828 ret = clk_prepare_enable(qphy->ref_clk);
829 if (ret) {
830 dev_err(&phy->dev, "failed to enable ref clk, %d\n",
831 ret);
832 goto assert_phy_reset;
833 }
834 }
835
836 if (cfg->has_pll_test) {
837 if (!qphy->has_se_clk_scheme)
838 val &= ~CLK_REF_SEL;
839 else
840 val |= CLK_REF_SEL;
841
842 writel(val, qphy->base + QUSB2PHY_PLL_TEST);
843
844 /* ensure above write is through */
845 readl(qphy->base + QUSB2PHY_PLL_TEST);
846 }
847
848 /* Required to get phy pll lock successfully */
849 usleep_range(100, 110);
850
851 val = readb(qphy->base + cfg->regs[QUSB2PHY_PLL_STATUS]);
852 if (!(val & cfg->mask_core_ready)) {
853 dev_err(&phy->dev,
854 "QUSB2PHY pll lock failed: status reg = %x\n", val);
855 ret = -EBUSY;
856 goto disable_ref_clk;
857 }
858 qphy->phy_initialized = true;
859
860 return 0;
861
862 disable_ref_clk:
863 if (!qphy->has_se_clk_scheme)
864 clk_disable_unprepare(qphy->ref_clk);
865 assert_phy_reset:
866 reset_control_assert(qphy->phy_reset);
867 disable_ahb_clk:
868 clk_disable_unprepare(qphy->cfg_ahb_clk);
869 disable_iface_clk:
870 clk_disable_unprepare(qphy->iface_clk);
871 poweroff_phy:
872 regulator_bulk_disable(ARRAY_SIZE(qphy->vregs), qphy->vregs);
873
874 return ret;
875 }
876
qusb2_phy_exit(struct phy * phy)877 static int qusb2_phy_exit(struct phy *phy)
878 {
879 struct qusb2_phy *qphy = phy_get_drvdata(phy);
880
881 /* Disable the PHY */
882 qusb2_setbits(qphy->base, qphy->cfg->regs[QUSB2PHY_PORT_POWERDOWN],
883 qphy->cfg->disable_ctrl);
884
885 if (!qphy->has_se_clk_scheme)
886 clk_disable_unprepare(qphy->ref_clk);
887
888 reset_control_assert(qphy->phy_reset);
889
890 clk_disable_unprepare(qphy->cfg_ahb_clk);
891 clk_disable_unprepare(qphy->iface_clk);
892
893 regulator_bulk_disable(ARRAY_SIZE(qphy->vregs), qphy->vregs);
894
895 qphy->phy_initialized = false;
896
897 return 0;
898 }
899
900 static const struct phy_ops qusb2_phy_gen_ops = {
901 .init = qusb2_phy_init,
902 .exit = qusb2_phy_exit,
903 .set_mode = qusb2_phy_set_mode,
904 .owner = THIS_MODULE,
905 };
906
907 static const struct of_device_id qusb2_phy_of_match_table[] = {
908 {
909 .compatible = "qcom,ipq6018-qusb2-phy",
910 .data = &ipq6018_phy_cfg,
911 }, {
912 .compatible = "qcom,ipq8074-qusb2-phy",
913 .data = &msm8996_phy_cfg,
914 }, {
915 .compatible = "qcom,msm8953-qusb2-phy",
916 .data = &msm8996_phy_cfg,
917 }, {
918 .compatible = "qcom,msm8996-qusb2-phy",
919 .data = &msm8996_phy_cfg,
920 }, {
921 .compatible = "qcom,msm8998-qusb2-phy",
922 .data = &msm8998_phy_cfg,
923 }, {
924 .compatible = "qcom,qcm2290-qusb2-phy",
925 .data = &sm6115_phy_cfg,
926 }, {
927 .compatible = "qcom,sdm660-qusb2-phy",
928 .data = &sdm660_phy_cfg,
929 }, {
930 .compatible = "qcom,sm4250-qusb2-phy",
931 .data = &sm6115_phy_cfg,
932 }, {
933 .compatible = "qcom,sm6115-qusb2-phy",
934 .data = &sm6115_phy_cfg,
935 }, {
936 /*
937 * Deprecated. Only here to support legacy device
938 * trees that didn't include "qcom,qusb2-v2-phy"
939 */
940 .compatible = "qcom,sdm845-qusb2-phy",
941 .data = &qusb2_v2_phy_cfg,
942 }, {
943 .compatible = "qcom,qusb2-v2-phy",
944 .data = &qusb2_v2_phy_cfg,
945 },
946 { },
947 };
948 MODULE_DEVICE_TABLE(of, qusb2_phy_of_match_table);
949
950 static const struct dev_pm_ops qusb2_phy_pm_ops = {
951 SET_RUNTIME_PM_OPS(qusb2_phy_runtime_suspend,
952 qusb2_phy_runtime_resume, NULL)
953 };
954
qusb2_phy_probe(struct platform_device * pdev)955 static int qusb2_phy_probe(struct platform_device *pdev)
956 {
957 struct device *dev = &pdev->dev;
958 struct qusb2_phy *qphy;
959 struct phy_provider *phy_provider;
960 struct phy *generic_phy;
961 int ret, i;
962 int num;
963 u32 value;
964 struct override_params *or;
965
966 qphy = devm_kzalloc(dev, sizeof(*qphy), GFP_KERNEL);
967 if (!qphy)
968 return -ENOMEM;
969 or = &qphy->overrides;
970
971 qphy->base = devm_platform_ioremap_resource(pdev, 0);
972 if (IS_ERR(qphy->base))
973 return PTR_ERR(qphy->base);
974
975 qphy->cfg_ahb_clk = devm_clk_get(dev, "cfg_ahb");
976 if (IS_ERR(qphy->cfg_ahb_clk)) {
977 ret = PTR_ERR(qphy->cfg_ahb_clk);
978 if (ret != -EPROBE_DEFER)
979 dev_err(dev, "failed to get cfg ahb clk, %d\n", ret);
980 return ret;
981 }
982
983 qphy->ref_clk = devm_clk_get(dev, "ref");
984 if (IS_ERR(qphy->ref_clk)) {
985 ret = PTR_ERR(qphy->ref_clk);
986 if (ret != -EPROBE_DEFER)
987 dev_err(dev, "failed to get ref clk, %d\n", ret);
988 return ret;
989 }
990
991 qphy->iface_clk = devm_clk_get_optional(dev, "iface");
992 if (IS_ERR(qphy->iface_clk))
993 return PTR_ERR(qphy->iface_clk);
994
995 qphy->phy_reset = devm_reset_control_get_by_index(&pdev->dev, 0);
996 if (IS_ERR(qphy->phy_reset)) {
997 dev_err(dev, "failed to get phy core reset\n");
998 return PTR_ERR(qphy->phy_reset);
999 }
1000
1001 num = ARRAY_SIZE(qphy->vregs);
1002 for (i = 0; i < num; i++)
1003 qphy->vregs[i].supply = qusb2_phy_vreg_names[i];
1004
1005 ret = devm_regulator_bulk_get(dev, num, qphy->vregs);
1006 if (ret) {
1007 if (ret != -EPROBE_DEFER)
1008 dev_err(dev, "failed to get regulator supplies: %d\n",
1009 ret);
1010 return ret;
1011 }
1012
1013 /* Get the specific init parameters of QMP phy */
1014 qphy->cfg = of_device_get_match_data(dev);
1015
1016 qphy->tcsr = syscon_regmap_lookup_by_phandle(dev->of_node,
1017 "qcom,tcsr-syscon");
1018 if (IS_ERR(qphy->tcsr)) {
1019 dev_dbg(dev, "failed to lookup TCSR regmap\n");
1020 qphy->tcsr = NULL;
1021 }
1022
1023 qphy->cell = devm_nvmem_cell_get(dev, NULL);
1024 if (IS_ERR(qphy->cell)) {
1025 if (PTR_ERR(qphy->cell) == -EPROBE_DEFER)
1026 return -EPROBE_DEFER;
1027 qphy->cell = NULL;
1028 dev_dbg(dev, "failed to lookup tune2 hstx trim value\n");
1029 }
1030
1031 if (!of_property_read_u32(dev->of_node, "qcom,imp-res-offset-value",
1032 &value)) {
1033 or->imp_res_offset.value = (u8)value;
1034 or->imp_res_offset.override = true;
1035 }
1036
1037 if (!of_property_read_u32(dev->of_node, "qcom,bias-ctrl-value",
1038 &value)) {
1039 or->bias_ctrl.value = (u8)value;
1040 or->bias_ctrl.override = true;
1041 }
1042
1043 if (!of_property_read_u32(dev->of_node, "qcom,charge-ctrl-value",
1044 &value)) {
1045 or->charge_ctrl.value = (u8)value;
1046 or->charge_ctrl.override = true;
1047 }
1048
1049 if (!of_property_read_u32(dev->of_node, "qcom,hstx-trim-value",
1050 &value)) {
1051 or->hstx_trim.value = (u8)value;
1052 or->hstx_trim.override = true;
1053 }
1054
1055 if (!of_property_read_u32(dev->of_node, "qcom,preemphasis-level",
1056 &value)) {
1057 or->preemphasis.value = (u8)value;
1058 or->preemphasis.override = true;
1059 }
1060
1061 if (!of_property_read_u32(dev->of_node, "qcom,preemphasis-width",
1062 &value)) {
1063 or->preemphasis_width.value = (u8)value;
1064 or->preemphasis_width.override = true;
1065 }
1066
1067 if (!of_property_read_u32(dev->of_node, "qcom,hsdisc-trim-value",
1068 &value)) {
1069 or->hsdisc_trim.value = (u8)value;
1070 or->hsdisc_trim.override = true;
1071 }
1072
1073 pm_runtime_set_active(dev);
1074 pm_runtime_enable(dev);
1075 /*
1076 * Prevent runtime pm from being ON by default. Users can enable
1077 * it using power/control in sysfs.
1078 */
1079 pm_runtime_forbid(dev);
1080
1081 generic_phy = devm_phy_create(dev, NULL, &qusb2_phy_gen_ops);
1082 if (IS_ERR(generic_phy)) {
1083 ret = PTR_ERR(generic_phy);
1084 dev_err(dev, "failed to create phy, %d\n", ret);
1085 pm_runtime_disable(dev);
1086 return ret;
1087 }
1088 qphy->phy = generic_phy;
1089
1090 dev_set_drvdata(dev, qphy);
1091 phy_set_drvdata(generic_phy, qphy);
1092
1093 phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
1094 if (!IS_ERR(phy_provider))
1095 dev_info(dev, "Registered Qcom-QUSB2 phy\n");
1096 else
1097 pm_runtime_disable(dev);
1098
1099 return PTR_ERR_OR_ZERO(phy_provider);
1100 }
1101
1102 static struct platform_driver qusb2_phy_driver = {
1103 .probe = qusb2_phy_probe,
1104 .driver = {
1105 .name = "qcom-qusb2-phy",
1106 .pm = &qusb2_phy_pm_ops,
1107 .of_match_table = qusb2_phy_of_match_table,
1108 },
1109 };
1110
1111 module_platform_driver(qusb2_phy_driver);
1112
1113 MODULE_AUTHOR("Vivek Gautam <vivek.gautam@codeaurora.org>");
1114 MODULE_DESCRIPTION("Qualcomm QUSB2 PHY driver");
1115 MODULE_LICENSE("GPL v2");
1116