1 /*
2 * Common Flash Interface support:
3 * Generic utility functions not dependent on command set
4 *
5 * Copyright (C) 2002 Red Hat
6 * Copyright (C) 2003 STMicroelectronics Limited
7 *
8 * This code is covered by the GPL.
9 */
10
11 #include <linux/module.h>
12 #include <linux/types.h>
13 #include <linux/kernel.h>
14 #include <asm/io.h>
15 #include <asm/byteorder.h>
16
17 #include <linux/errno.h>
18 #include <linux/slab.h>
19 #include <linux/delay.h>
20 #include <linux/interrupt.h>
21 #include <linux/mtd/xip.h>
22 #include <linux/mtd/mtd.h>
23 #include <linux/mtd/map.h>
24 #include <linux/mtd/cfi.h>
25
cfi_udelay(int us)26 void cfi_udelay(int us)
27 {
28 if (us >= 1000) {
29 msleep(DIV_ROUND_UP(us, 1000));
30 } else {
31 udelay(us);
32 cond_resched();
33 }
34 }
35 EXPORT_SYMBOL(cfi_udelay);
36
37 /*
38 * Returns the command address according to the given geometry.
39 */
cfi_build_cmd_addr(uint32_t cmd_ofs,struct map_info * map,struct cfi_private * cfi)40 uint32_t cfi_build_cmd_addr(uint32_t cmd_ofs,
41 struct map_info *map, struct cfi_private *cfi)
42 {
43 unsigned bankwidth = map_bankwidth(map);
44 unsigned interleave = cfi_interleave(cfi);
45 unsigned type = cfi->device_type;
46 uint32_t addr;
47
48 addr = (cmd_ofs * type) * interleave;
49
50 /* Modify the unlock address if we are in compatibility mode.
51 * For 16bit devices on 8 bit busses
52 * and 32bit devices on 16 bit busses
53 * set the low bit of the alternating bit sequence of the address.
54 */
55 if (((type * interleave) > bankwidth) && ((cmd_ofs & 0xff) == 0xaa))
56 addr |= (type >> 1)*interleave;
57
58 return addr;
59 }
60 EXPORT_SYMBOL(cfi_build_cmd_addr);
61
62 /*
63 * Transforms the CFI command for the given geometry (bus width & interleave).
64 * It looks too long to be inline, but in the common case it should almost all
65 * get optimised away.
66 */
cfi_build_cmd(u_long cmd,struct map_info * map,struct cfi_private * cfi)67 map_word cfi_build_cmd(u_long cmd, struct map_info *map, struct cfi_private *cfi)
68 {
69 map_word val = { {0} };
70 int wordwidth, words_per_bus, chip_mode, chips_per_word;
71 unsigned long onecmd;
72 int i;
73
74 /* We do it this way to give the compiler a fighting chance
75 of optimising away all the crap for 'bankwidth' larger than
76 an unsigned long, in the common case where that support is
77 disabled */
78 if (map_bankwidth_is_large(map)) {
79 wordwidth = sizeof(unsigned long);
80 words_per_bus = (map_bankwidth(map)) / wordwidth; // i.e. normally 1
81 } else {
82 wordwidth = map_bankwidth(map);
83 words_per_bus = 1;
84 }
85
86 chip_mode = map_bankwidth(map) / cfi_interleave(cfi);
87 chips_per_word = wordwidth * cfi_interleave(cfi) / map_bankwidth(map);
88
89 /* First, determine what the bit-pattern should be for a single
90 device, according to chip mode and endianness... */
91 switch (chip_mode) {
92 default: BUG();
93 case 1:
94 onecmd = cmd;
95 break;
96 case 2:
97 onecmd = cpu_to_cfi16(map, cmd);
98 break;
99 case 4:
100 onecmd = cpu_to_cfi32(map, cmd);
101 break;
102 }
103
104 /* Now replicate it across the size of an unsigned long, or
105 just to the bus width as appropriate */
106 switch (chips_per_word) {
107 default: BUG();
108 #if BITS_PER_LONG >= 64
109 case 8:
110 onecmd |= (onecmd << (chip_mode * 32));
111 fallthrough;
112 #endif
113 case 4:
114 onecmd |= (onecmd << (chip_mode * 16));
115 fallthrough;
116 case 2:
117 onecmd |= (onecmd << (chip_mode * 8));
118 fallthrough;
119 case 1:
120 ;
121 }
122
123 /* And finally, for the multi-word case, replicate it
124 in all words in the structure */
125 for (i=0; i < words_per_bus; i++) {
126 val.x[i] = onecmd;
127 }
128
129 return val;
130 }
131 EXPORT_SYMBOL(cfi_build_cmd);
132
cfi_merge_status(map_word val,struct map_info * map,struct cfi_private * cfi)133 unsigned long cfi_merge_status(map_word val, struct map_info *map,
134 struct cfi_private *cfi)
135 {
136 int wordwidth, words_per_bus, chip_mode, chips_per_word;
137 unsigned long onestat, res = 0;
138 int i;
139
140 /* We do it this way to give the compiler a fighting chance
141 of optimising away all the crap for 'bankwidth' larger than
142 an unsigned long, in the common case where that support is
143 disabled */
144 if (map_bankwidth_is_large(map)) {
145 wordwidth = sizeof(unsigned long);
146 words_per_bus = (map_bankwidth(map)) / wordwidth; // i.e. normally 1
147 } else {
148 wordwidth = map_bankwidth(map);
149 words_per_bus = 1;
150 }
151
152 chip_mode = map_bankwidth(map) / cfi_interleave(cfi);
153 chips_per_word = wordwidth * cfi_interleave(cfi) / map_bankwidth(map);
154
155 onestat = val.x[0];
156 /* Or all status words together */
157 for (i=1; i < words_per_bus; i++) {
158 onestat |= val.x[i];
159 }
160
161 res = onestat;
162 switch(chips_per_word) {
163 default: BUG();
164 #if BITS_PER_LONG >= 64
165 case 8:
166 res |= (onestat >> (chip_mode * 32));
167 fallthrough;
168 #endif
169 case 4:
170 res |= (onestat >> (chip_mode * 16));
171 fallthrough;
172 case 2:
173 res |= (onestat >> (chip_mode * 8));
174 fallthrough;
175 case 1:
176 ;
177 }
178
179 /* Last, determine what the bit-pattern should be for a single
180 device, according to chip mode and endianness... */
181 switch (chip_mode) {
182 case 1:
183 break;
184 case 2:
185 res = cfi16_to_cpu(map, res);
186 break;
187 case 4:
188 res = cfi32_to_cpu(map, res);
189 break;
190 default: BUG();
191 }
192 return res;
193 }
194 EXPORT_SYMBOL(cfi_merge_status);
195
196 /*
197 * Sends a CFI command to a bank of flash for the given geometry.
198 *
199 * Returns the offset in flash where the command was written.
200 * If prev_val is non-null, it will be set to the value at the command address,
201 * before the command was written.
202 */
cfi_send_gen_cmd(u_char cmd,uint32_t cmd_addr,uint32_t base,struct map_info * map,struct cfi_private * cfi,int type,map_word * prev_val)203 uint32_t cfi_send_gen_cmd(u_char cmd, uint32_t cmd_addr, uint32_t base,
204 struct map_info *map, struct cfi_private *cfi,
205 int type, map_word *prev_val)
206 {
207 map_word val;
208 uint32_t addr = base + cfi_build_cmd_addr(cmd_addr, map, cfi);
209 val = cfi_build_cmd(cmd, map, cfi);
210
211 if (prev_val)
212 *prev_val = map_read(map, addr);
213
214 map_write(map, val, addr);
215
216 return addr - base;
217 }
218 EXPORT_SYMBOL(cfi_send_gen_cmd);
219
cfi_qry_present(struct map_info * map,__u32 base,struct cfi_private * cfi)220 int __xipram cfi_qry_present(struct map_info *map, __u32 base,
221 struct cfi_private *cfi)
222 {
223 int osf = cfi->interleave * cfi->device_type; /* scale factor */
224 map_word val[3];
225 map_word qry[3];
226
227 qry[0] = cfi_build_cmd('Q', map, cfi);
228 qry[1] = cfi_build_cmd('R', map, cfi);
229 qry[2] = cfi_build_cmd('Y', map, cfi);
230
231 val[0] = map_read(map, base + osf*0x10);
232 val[1] = map_read(map, base + osf*0x11);
233 val[2] = map_read(map, base + osf*0x12);
234
235 if (!map_word_equal(map, qry[0], val[0]))
236 return 0;
237
238 if (!map_word_equal(map, qry[1], val[1]))
239 return 0;
240
241 if (!map_word_equal(map, qry[2], val[2]))
242 return 0;
243
244 return 1; /* "QRY" found */
245 }
246 EXPORT_SYMBOL_GPL(cfi_qry_present);
247
cfi_qry_mode_on(uint32_t base,struct map_info * map,struct cfi_private * cfi)248 int __xipram cfi_qry_mode_on(uint32_t base, struct map_info *map,
249 struct cfi_private *cfi)
250 {
251 cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL);
252 cfi_send_gen_cmd(0x98, 0x55, base, map, cfi, cfi->device_type, NULL);
253 if (cfi_qry_present(map, base, cfi))
254 return 1;
255 /* QRY not found probably we deal with some odd CFI chips */
256 /* Some revisions of some old Intel chips? */
257 cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL);
258 cfi_send_gen_cmd(0xFF, 0, base, map, cfi, cfi->device_type, NULL);
259 cfi_send_gen_cmd(0x98, 0x55, base, map, cfi, cfi->device_type, NULL);
260 if (cfi_qry_present(map, base, cfi))
261 return 1;
262 /* ST M29DW chips */
263 cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL);
264 cfi_send_gen_cmd(0x98, 0x555, base, map, cfi, cfi->device_type, NULL);
265 if (cfi_qry_present(map, base, cfi))
266 return 1;
267 /* some old SST chips, e.g. 39VF160x/39VF320x */
268 cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL);
269 cfi_send_gen_cmd(0xAA, 0x5555, base, map, cfi, cfi->device_type, NULL);
270 cfi_send_gen_cmd(0x55, 0x2AAA, base, map, cfi, cfi->device_type, NULL);
271 cfi_send_gen_cmd(0x98, 0x5555, base, map, cfi, cfi->device_type, NULL);
272 if (cfi_qry_present(map, base, cfi))
273 return 1;
274 /* SST 39VF640xB */
275 cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL);
276 cfi_send_gen_cmd(0xAA, 0x555, base, map, cfi, cfi->device_type, NULL);
277 cfi_send_gen_cmd(0x55, 0x2AA, base, map, cfi, cfi->device_type, NULL);
278 cfi_send_gen_cmd(0x98, 0x555, base, map, cfi, cfi->device_type, NULL);
279 if (cfi_qry_present(map, base, cfi))
280 return 1;
281 /* QRY not found */
282 return 0;
283 }
284 EXPORT_SYMBOL_GPL(cfi_qry_mode_on);
285
cfi_qry_mode_off(uint32_t base,struct map_info * map,struct cfi_private * cfi)286 void __xipram cfi_qry_mode_off(uint32_t base, struct map_info *map,
287 struct cfi_private *cfi)
288 {
289 cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL);
290 cfi_send_gen_cmd(0xFF, 0, base, map, cfi, cfi->device_type, NULL);
291 /* M29W128G flashes require an additional reset command
292 when exit qry mode */
293 if ((cfi->mfr == CFI_MFR_ST) && (cfi->id == 0x227E || cfi->id == 0x7E))
294 cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL);
295 }
296 EXPORT_SYMBOL_GPL(cfi_qry_mode_off);
297
298 struct cfi_extquery *
cfi_read_pri(struct map_info * map,__u16 adr,__u16 size,const char * name)299 __xipram cfi_read_pri(struct map_info *map, __u16 adr, __u16 size, const char* name)
300 {
301 struct cfi_private *cfi = map->fldrv_priv;
302 __u32 base = 0; // cfi->chips[0].start;
303 int ofs_factor = cfi->interleave * cfi->device_type;
304 int i;
305 struct cfi_extquery *extp = NULL;
306
307 if (!adr)
308 goto out;
309
310 printk(KERN_INFO "%s Extended Query Table at 0x%4.4X\n", name, adr);
311
312 extp = kmalloc(size, GFP_KERNEL);
313 if (!extp)
314 goto out;
315
316 #ifdef CONFIG_MTD_XIP
317 local_irq_disable();
318 #endif
319
320 /* Switch it into Query Mode */
321 cfi_qry_mode_on(base, map, cfi);
322 /* Read in the Extended Query Table */
323 for (i=0; i<size; i++) {
324 ((unsigned char *)extp)[i] =
325 cfi_read_query(map, base+((adr+i)*ofs_factor));
326 }
327
328 /* Make sure it returns to read mode */
329 cfi_qry_mode_off(base, map, cfi);
330
331 #ifdef CONFIG_MTD_XIP
332 (void) map_read(map, base);
333 xip_iprefetch();
334 local_irq_enable();
335 #endif
336
337 out: return extp;
338 }
339
340 EXPORT_SYMBOL(cfi_read_pri);
341
cfi_fixup(struct mtd_info * mtd,struct cfi_fixup * fixups)342 void cfi_fixup(struct mtd_info *mtd, struct cfi_fixup *fixups)
343 {
344 struct map_info *map = mtd->priv;
345 struct cfi_private *cfi = map->fldrv_priv;
346 struct cfi_fixup *f;
347
348 for (f=fixups; f->fixup; f++) {
349 if (((f->mfr == CFI_MFR_ANY) || (f->mfr == cfi->mfr)) &&
350 ((f->id == CFI_ID_ANY) || (f->id == cfi->id))) {
351 f->fixup(mtd);
352 }
353 }
354 }
355
356 EXPORT_SYMBOL(cfi_fixup);
357
cfi_varsize_frob(struct mtd_info * mtd,varsize_frob_t frob,loff_t ofs,size_t len,void * thunk)358 int cfi_varsize_frob(struct mtd_info *mtd, varsize_frob_t frob,
359 loff_t ofs, size_t len, void *thunk)
360 {
361 struct map_info *map = mtd->priv;
362 struct cfi_private *cfi = map->fldrv_priv;
363 unsigned long adr;
364 int chipnum, ret = 0;
365 int i, first;
366 struct mtd_erase_region_info *regions = mtd->eraseregions;
367
368 /* Check that both start and end of the requested erase are
369 * aligned with the erasesize at the appropriate addresses.
370 */
371
372 i = 0;
373
374 /* Skip all erase regions which are ended before the start of
375 the requested erase. Actually, to save on the calculations,
376 we skip to the first erase region which starts after the
377 start of the requested erase, and then go back one.
378 */
379
380 while (i < mtd->numeraseregions && ofs >= regions[i].offset)
381 i++;
382 i--;
383
384 /* OK, now i is pointing at the erase region in which this
385 erase request starts. Check the start of the requested
386 erase range is aligned with the erase size which is in
387 effect here.
388 */
389
390 if (ofs & (regions[i].erasesize-1))
391 return -EINVAL;
392
393 /* Remember the erase region we start on */
394 first = i;
395
396 /* Next, check that the end of the requested erase is aligned
397 * with the erase region at that address.
398 */
399
400 while (i<mtd->numeraseregions && (ofs + len) >= regions[i].offset)
401 i++;
402
403 /* As before, drop back one to point at the region in which
404 the address actually falls
405 */
406 i--;
407
408 if ((ofs + len) & (regions[i].erasesize-1))
409 return -EINVAL;
410
411 chipnum = ofs >> cfi->chipshift;
412 adr = ofs - (chipnum << cfi->chipshift);
413
414 i=first;
415
416 while(len) {
417 int size = regions[i].erasesize;
418
419 ret = (*frob)(map, &cfi->chips[chipnum], adr, size, thunk);
420
421 if (ret)
422 return ret;
423
424 adr += size;
425 ofs += size;
426 len -= size;
427
428 if (ofs == regions[i].offset + size * regions[i].numblocks)
429 i++;
430
431 if (adr >> cfi->chipshift) {
432 adr = 0;
433 chipnum++;
434
435 if (chipnum >= cfi->numchips)
436 break;
437 }
438 }
439
440 return 0;
441 }
442
443 EXPORT_SYMBOL(cfi_varsize_frob);
444
445 MODULE_LICENSE("GPL");
446