1 /* mc146818rtc.h - register definitions for the Real-Time-Clock / CMOS RAM 2 * Copyright Torsten Duwe <duwe@informatik.uni-erlangen.de> 1993 3 * derived from Data Sheet, Copyright Motorola 1984 (!). 4 * It was written to be part of the Linux operating system. 5 */ 6 /* permission is hereby granted to copy, modify and redistribute this code 7 * in terms of the GNU Library General Public License, Version 2 or later, 8 * at your option. 9 */ 10 11 #ifndef _MC146818RTC_H 12 #define _MC146818RTC_H 13 14 #include <asm/io.h> 15 #include <linux/rtc.h> /* get the user-level API */ 16 #include <asm/mc146818rtc.h> /* register access macros */ 17 18 #ifdef __KERNEL__ 19 #include <linux/spinlock.h> /* spinlock_t */ 20 extern spinlock_t rtc_lock; /* serialize CMOS RAM access */ 21 22 /* Some RTCs extend the mc146818 register set to support alarms of more 23 * than 24 hours in the future; or dates that include a century code. 24 * This platform_data structure can pass this information to the driver. 25 * 26 * Also, some platforms need suspend()/resume() hooks to kick in special 27 * handling of wake alarms, e.g. activating ACPI BIOS hooks or setting up 28 * a separate wakeup alarm used by some almost-clone chips. 29 */ 30 struct cmos_rtc_board_info { 31 void (*wake_on)(struct device *dev); 32 void (*wake_off)(struct device *dev); 33 34 u8 rtc_day_alarm; /* zero, or register index */ 35 u8 rtc_mon_alarm; /* zero, or register index */ 36 u8 rtc_century; /* zero, or register index */ 37 }; 38 #endif 39 40 /********************************************************************** 41 * register summary 42 **********************************************************************/ 43 #define RTC_SECONDS 0 44 #define RTC_SECONDS_ALARM 1 45 #define RTC_MINUTES 2 46 #define RTC_MINUTES_ALARM 3 47 #define RTC_HOURS 4 48 #define RTC_HOURS_ALARM 5 49 /* RTC_*_alarm is always true if 2 MSBs are set */ 50 # define RTC_ALARM_DONT_CARE 0xC0 51 52 #define RTC_DAY_OF_WEEK 6 53 #define RTC_DAY_OF_MONTH 7 54 #define RTC_MONTH 8 55 #define RTC_YEAR 9 56 57 /* control registers - Moto names 58 */ 59 #define RTC_REG_A 10 60 #define RTC_REG_B 11 61 #define RTC_REG_C 12 62 #define RTC_REG_D 13 63 64 /********************************************************************** 65 * register details 66 **********************************************************************/ 67 #define RTC_FREQ_SELECT RTC_REG_A 68 69 /* update-in-progress - set to "1" 244 microsecs before RTC goes off the bus, 70 * reset after update (may take 1.984ms @ 32768Hz RefClock) is complete, 71 * totalling to a max high interval of 2.228 ms. 72 */ 73 # define RTC_UIP 0x80 74 # define RTC_DIV_CTL 0x70 75 /* divider control: refclock values 4.194 / 1.049 MHz / 32.768 kHz */ 76 # define RTC_REF_CLCK_4MHZ 0x00 77 # define RTC_REF_CLCK_1MHZ 0x10 78 # define RTC_REF_CLCK_32KHZ 0x20 79 /* 2 values for divider stage reset, others for "testing purposes only" */ 80 # define RTC_DIV_RESET1 0x60 81 # define RTC_DIV_RESET2 0x70 82 /* Periodic intr. / Square wave rate select. 0=none, 1=32.8kHz,... 15=2Hz */ 83 # define RTC_RATE_SELECT 0x0F 84 85 /**********************************************************************/ 86 #define RTC_CONTROL RTC_REG_B 87 # define RTC_SET 0x80 /* disable updates for clock setting */ 88 # define RTC_PIE 0x40 /* periodic interrupt enable */ 89 # define RTC_AIE 0x20 /* alarm interrupt enable */ 90 # define RTC_UIE 0x10 /* update-finished interrupt enable */ 91 # define RTC_SQWE 0x08 /* enable square-wave output */ 92 # define RTC_DM_BINARY 0x04 /* all time/date values are BCD if clear */ 93 # define RTC_24H 0x02 /* 24 hour mode - else hours bit 7 means pm */ 94 # define RTC_DST_EN 0x01 /* auto switch DST - works f. USA only */ 95 96 /**********************************************************************/ 97 #define RTC_INTR_FLAGS RTC_REG_C 98 /* caution - cleared by read */ 99 # define RTC_IRQF 0x80 /* any of the following 3 is active */ 100 # define RTC_PF 0x40 101 # define RTC_AF 0x20 102 # define RTC_UF 0x10 103 104 /**********************************************************************/ 105 #define RTC_VALID RTC_REG_D 106 # define RTC_VRT 0x80 /* valid RAM and time */ 107 /**********************************************************************/ 108 109 #ifndef ARCH_RTC_LOCATION /* Override by <asm/mc146818rtc.h>? */ 110 111 #define RTC_IO_EXTENT 0x8 112 #define RTC_IO_EXTENT_USED 0x2 113 #define RTC_IOMAPPED 1 /* Default to I/O mapping. */ 114 115 #else 116 #define RTC_IO_EXTENT_USED RTC_IO_EXTENT 117 #endif /* ARCH_RTC_LOCATION */ 118 119 #endif /* _MC146818RTC_H */ 120