1 /*
2  * include/linux/fsl_devices.h
3  *
4  * Definitions for any platform device related flags or structures for
5  * Freescale processor devices
6  *
7  * Maintainer: Kumar Gala <galak@kernel.crashing.org>
8  *
9  * Copyright 2004 Freescale Semiconductor, Inc
10  *
11  * This program is free software; you can redistribute  it and/or modify it
12  * under  the terms of  the GNU General  Public License as published by the
13  * Free Software Foundation;  either version 2 of the  License, or (at your
14  * option) any later version.
15  */
16 
17 #ifndef _FSL_DEVICE_H_
18 #define _FSL_DEVICE_H_
19 
20 #include <linux/types.h>
21 
22 /*
23  * Some conventions on how we handle peripherals on Freescale chips
24  *
25  * unique device: a platform_device entry in fsl_plat_devs[] plus
26  * associated device information in its platform_data structure.
27  *
28  * A chip is described by a set of unique devices.
29  *
30  * Each sub-arch has its own master list of unique devices and
31  * enumerates them by enum fsl_devices in a sub-arch specific header
32  *
33  * The platform data structure is broken into two parts.  The
34  * first is device specific information that help identify any
35  * unique features of a peripheral.  The second is any
36  * information that may be defined by the board or how the device
37  * is connected externally of the chip.
38  *
39  * naming conventions:
40  * - platform data structures: <driver>_platform_data
41  * - platform data device flags: FSL_<driver>_DEV_<FLAG>
42  * - platform data board flags: FSL_<driver>_BRD_<FLAG>
43  *
44  */
45 
46 enum fsl_usb2_operating_modes {
47 	FSL_USB2_MPH_HOST,
48 	FSL_USB2_DR_HOST,
49 	FSL_USB2_DR_DEVICE,
50 	FSL_USB2_DR_OTG,
51 };
52 
53 enum fsl_usb2_phy_modes {
54 	FSL_USB2_PHY_NONE,
55 	FSL_USB2_PHY_ULPI,
56 	FSL_USB2_PHY_UTMI,
57 	FSL_USB2_PHY_UTMI_WIDE,
58 	FSL_USB2_PHY_SERIAL,
59 };
60 
61 struct clk;
62 struct platform_device;
63 
64 struct fsl_usb2_platform_data {
65 	/* board specific information */
66 	enum fsl_usb2_operating_modes	operating_mode;
67 	enum fsl_usb2_phy_modes		phy_mode;
68 	unsigned int			port_enables;
69 	unsigned int			workaround;
70 
71 	int		(*init)(struct platform_device *);
72 	void		(*exit)(struct platform_device *);
73 	void __iomem	*regs;		/* ioremap'd register base */
74 	struct clk	*clk;
75 	unsigned	power_budget;	/* hcd->power_budget */
76 	unsigned	big_endian_mmio:1;
77 	unsigned	big_endian_desc:1;
78 	unsigned	es:1;		/* need USBMODE:ES */
79 	unsigned	le_setup_buf:1;
80 	unsigned	have_sysif_regs:1;
81 	unsigned	invert_drvvbus:1;
82 	unsigned	invert_pwr_fault:1;
83 
84 	unsigned	suspended:1;
85 	unsigned	already_suspended:1;
86 
87 	/* register save area for suspend/resume */
88 	u32		pm_command;
89 	u32		pm_status;
90 	u32		pm_intr_enable;
91 	u32		pm_frame_index;
92 	u32		pm_segment;
93 	u32		pm_frame_list;
94 	u32		pm_async_next;
95 	u32		pm_configured_flag;
96 	u32		pm_portsc;
97 	u32		pm_usbgenctrl;
98 };
99 
100 /* Flags in fsl_usb2_mph_platform_data */
101 #define FSL_USB2_PORT0_ENABLED	0x00000001
102 #define FSL_USB2_PORT1_ENABLED	0x00000002
103 
104 #define FLS_USB2_WORKAROUND_ENGCM09152	(1 << 0)
105 
106 struct spi_device;
107 
108 struct fsl_spi_platform_data {
109 	u32 	initial_spmode;	/* initial SPMODE value */
110 	s16	bus_num;
111 	unsigned int flags;
112 #define SPI_QE_CPU_MODE		(1 << 0) /* QE CPU ("PIO") mode */
113 #define SPI_CPM_MODE		(1 << 1) /* CPM/QE ("DMA") mode */
114 #define SPI_CPM1		(1 << 2) /* SPI unit is in CPM1 block */
115 #define SPI_CPM2		(1 << 3) /* SPI unit is in CPM2 block */
116 #define SPI_QE			(1 << 4) /* SPI unit is in QE block */
117 	/* board specific information */
118 	u16	max_chipselect;
119 	void	(*cs_control)(struct spi_device *spi, bool on);
120 	u32	sysclk;
121 };
122 
123 struct mpc8xx_pcmcia_ops {
124 	void(*hw_ctrl)(int slot, int enable);
125 	int(*voltage_set)(int slot, int vcc, int vpp);
126 };
127 
128 /* Returns non-zero if the current suspend operation would
129  * lead to a deep sleep (i.e. power removed from the core,
130  * instead of just the clock).
131  */
132 #if defined(CONFIG_PPC_83xx) && defined(CONFIG_SUSPEND)
133 int fsl_deep_sleep(void);
134 #else
fsl_deep_sleep(void)135 static inline int fsl_deep_sleep(void) { return 0; }
136 #endif
137 
138 #endif /* _FSL_DEVICE_H_ */
139