1 /*
2 * Copyright (c) 1997-2000 LAN Media Corporation (LMC)
3 * All rights reserved. www.lanmedia.com
4 * Generic HDLC port Copyright (C) 2008 Krzysztof Halasa <khc@pm.waw.pl>
5 *
6 * This code is written by:
7 * Andrew Stanley-Jones (asj@cban.com)
8 * Rob Braun (bbraun@vix.com),
9 * Michael Graff (explorer@vix.com) and
10 * Matt Thomas (matt@3am-software.com).
11 *
12 * With Help By:
13 * David Boggs
14 * Ron Crane
15 * Alan Cox
16 *
17 * This software may be used and distributed according to the terms
18 * of the GNU General Public License version 2, incorporated herein by reference.
19 *
20 * Driver for the LanMedia LMC5200, LMC5245, LMC1000, LMC1200 cards.
21 *
22 * To control link specific options lmcctl is required.
23 * It can be obtained from ftp.lanmedia.com.
24 *
25 * Linux driver notes:
26 * Linux uses the device struct lmc_private to pass private information
27 * around.
28 *
29 * The initialization portion of this driver (the lmc_reset() and the
30 * lmc_dec_reset() functions, as well as the led controls and the
31 * lmc_initcsrs() functions.
32 *
33 * The watchdog function runs every second and checks to see if
34 * we still have link, and that the timing source is what we expected
35 * it to be. If link is lost, the interface is marked down, and
36 * we no longer can transmit.
37 *
38 */
39
40 #include <linux/kernel.h>
41 #include <linux/module.h>
42 #include <linux/string.h>
43 #include <linux/timer.h>
44 #include <linux/ptrace.h>
45 #include <linux/errno.h>
46 #include <linux/ioport.h>
47 #include <linux/slab.h>
48 #include <linux/interrupt.h>
49 #include <linux/pci.h>
50 #include <linux/delay.h>
51 #include <linux/hdlc.h>
52 #include <linux/init.h>
53 #include <linux/in.h>
54 #include <linux/if_arp.h>
55 #include <linux/netdevice.h>
56 #include <linux/etherdevice.h>
57 #include <linux/skbuff.h>
58 #include <linux/inet.h>
59 #include <linux/bitops.h>
60 #include <asm/processor.h> /* Processor type for cache alignment. */
61 #include <asm/io.h>
62 #include <asm/dma.h>
63 #include <asm/uaccess.h>
64 //#include <asm/spinlock.h>
65
66 #define DRIVER_MAJOR_VERSION 1
67 #define DRIVER_MINOR_VERSION 34
68 #define DRIVER_SUB_VERSION 0
69
70 #define DRIVER_VERSION ((DRIVER_MAJOR_VERSION << 8) + DRIVER_MINOR_VERSION)
71
72 #include "lmc.h"
73 #include "lmc_var.h"
74 #include "lmc_ioctl.h"
75 #include "lmc_debug.h"
76 #include "lmc_proto.h"
77
78 static int LMC_PKT_BUF_SZ = 1542;
79
80 static DEFINE_PCI_DEVICE_TABLE(lmc_pci_tbl) = {
81 { PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_TULIP_FAST,
82 PCI_VENDOR_ID_LMC, PCI_ANY_ID },
83 { PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_TULIP_FAST,
84 PCI_ANY_ID, PCI_VENDOR_ID_LMC },
85 { 0 }
86 };
87
88 MODULE_DEVICE_TABLE(pci, lmc_pci_tbl);
89 MODULE_LICENSE("GPL v2");
90
91
92 static netdev_tx_t lmc_start_xmit(struct sk_buff *skb,
93 struct net_device *dev);
94 static int lmc_rx (struct net_device *dev);
95 static int lmc_open(struct net_device *dev);
96 static int lmc_close(struct net_device *dev);
97 static struct net_device_stats *lmc_get_stats(struct net_device *dev);
98 static irqreturn_t lmc_interrupt(int irq, void *dev_instance);
99 static void lmc_initcsrs(lmc_softc_t * const sc, lmc_csrptr_t csr_base, size_t csr_size);
100 static void lmc_softreset(lmc_softc_t * const);
101 static void lmc_running_reset(struct net_device *dev);
102 static int lmc_ifdown(struct net_device * const);
103 static void lmc_watchdog(unsigned long data);
104 static void lmc_reset(lmc_softc_t * const sc);
105 static void lmc_dec_reset(lmc_softc_t * const sc);
106 static void lmc_driver_timeout(struct net_device *dev);
107
108 /*
109 * linux reserves 16 device specific IOCTLs. We call them
110 * LMCIOC* to control various bits of our world.
111 */
lmc_ioctl(struct net_device * dev,struct ifreq * ifr,int cmd)112 int lmc_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) /*fold00*/
113 {
114 lmc_softc_t *sc = dev_to_sc(dev);
115 lmc_ctl_t ctl;
116 int ret = -EOPNOTSUPP;
117 u16 regVal;
118 unsigned long flags;
119
120 lmc_trace(dev, "lmc_ioctl in");
121
122 /*
123 * Most functions mess with the structure
124 * Disable interrupts while we do the polling
125 */
126
127 switch (cmd) {
128 /*
129 * Return current driver state. Since we keep this up
130 * To date internally, just copy this out to the user.
131 */
132 case LMCIOCGINFO: /*fold01*/
133 if (copy_to_user(ifr->ifr_data, &sc->ictl, sizeof(lmc_ctl_t)))
134 ret = -EFAULT;
135 else
136 ret = 0;
137 break;
138
139 case LMCIOCSINFO: /*fold01*/
140 if (!capable(CAP_NET_ADMIN)) {
141 ret = -EPERM;
142 break;
143 }
144
145 if(dev->flags & IFF_UP){
146 ret = -EBUSY;
147 break;
148 }
149
150 if (copy_from_user(&ctl, ifr->ifr_data, sizeof(lmc_ctl_t))) {
151 ret = -EFAULT;
152 break;
153 }
154
155 spin_lock_irqsave(&sc->lmc_lock, flags);
156 sc->lmc_media->set_status (sc, &ctl);
157
158 if(ctl.crc_length != sc->ictl.crc_length) {
159 sc->lmc_media->set_crc_length(sc, ctl.crc_length);
160 if (sc->ictl.crc_length == LMC_CTL_CRC_LENGTH_16)
161 sc->TxDescriptControlInit |= LMC_TDES_ADD_CRC_DISABLE;
162 else
163 sc->TxDescriptControlInit &= ~LMC_TDES_ADD_CRC_DISABLE;
164 }
165 spin_unlock_irqrestore(&sc->lmc_lock, flags);
166
167 ret = 0;
168 break;
169
170 case LMCIOCIFTYPE: /*fold01*/
171 {
172 u16 old_type = sc->if_type;
173 u16 new_type;
174
175 if (!capable(CAP_NET_ADMIN)) {
176 ret = -EPERM;
177 break;
178 }
179
180 if (copy_from_user(&new_type, ifr->ifr_data, sizeof(u16))) {
181 ret = -EFAULT;
182 break;
183 }
184
185
186 if (new_type == old_type)
187 {
188 ret = 0 ;
189 break; /* no change */
190 }
191
192 spin_lock_irqsave(&sc->lmc_lock, flags);
193 lmc_proto_close(sc);
194
195 sc->if_type = new_type;
196 lmc_proto_attach(sc);
197 ret = lmc_proto_open(sc);
198 spin_unlock_irqrestore(&sc->lmc_lock, flags);
199 break;
200 }
201
202 case LMCIOCGETXINFO: /*fold01*/
203 spin_lock_irqsave(&sc->lmc_lock, flags);
204 sc->lmc_xinfo.Magic0 = 0xBEEFCAFE;
205
206 sc->lmc_xinfo.PciCardType = sc->lmc_cardtype;
207 sc->lmc_xinfo.PciSlotNumber = 0;
208 sc->lmc_xinfo.DriverMajorVersion = DRIVER_MAJOR_VERSION;
209 sc->lmc_xinfo.DriverMinorVersion = DRIVER_MINOR_VERSION;
210 sc->lmc_xinfo.DriverSubVersion = DRIVER_SUB_VERSION;
211 sc->lmc_xinfo.XilinxRevisionNumber =
212 lmc_mii_readreg (sc, 0, 3) & 0xf;
213 sc->lmc_xinfo.MaxFrameSize = LMC_PKT_BUF_SZ;
214 sc->lmc_xinfo.link_status = sc->lmc_media->get_link_status (sc);
215 sc->lmc_xinfo.mii_reg16 = lmc_mii_readreg (sc, 0, 16);
216 spin_unlock_irqrestore(&sc->lmc_lock, flags);
217
218 sc->lmc_xinfo.Magic1 = 0xDEADBEEF;
219
220 if (copy_to_user(ifr->ifr_data, &sc->lmc_xinfo,
221 sizeof(struct lmc_xinfo)))
222 ret = -EFAULT;
223 else
224 ret = 0;
225
226 break;
227
228 case LMCIOCGETLMCSTATS:
229 spin_lock_irqsave(&sc->lmc_lock, flags);
230 if (sc->lmc_cardtype == LMC_CARDTYPE_T1) {
231 lmc_mii_writereg(sc, 0, 17, T1FRAMER_FERR_LSB);
232 sc->extra_stats.framingBitErrorCount +=
233 lmc_mii_readreg(sc, 0, 18) & 0xff;
234 lmc_mii_writereg(sc, 0, 17, T1FRAMER_FERR_MSB);
235 sc->extra_stats.framingBitErrorCount +=
236 (lmc_mii_readreg(sc, 0, 18) & 0xff) << 8;
237 lmc_mii_writereg(sc, 0, 17, T1FRAMER_LCV_LSB);
238 sc->extra_stats.lineCodeViolationCount +=
239 lmc_mii_readreg(sc, 0, 18) & 0xff;
240 lmc_mii_writereg(sc, 0, 17, T1FRAMER_LCV_MSB);
241 sc->extra_stats.lineCodeViolationCount +=
242 (lmc_mii_readreg(sc, 0, 18) & 0xff) << 8;
243 lmc_mii_writereg(sc, 0, 17, T1FRAMER_AERR);
244 regVal = lmc_mii_readreg(sc, 0, 18) & 0xff;
245
246 sc->extra_stats.lossOfFrameCount +=
247 (regVal & T1FRAMER_LOF_MASK) >> 4;
248 sc->extra_stats.changeOfFrameAlignmentCount +=
249 (regVal & T1FRAMER_COFA_MASK) >> 2;
250 sc->extra_stats.severelyErroredFrameCount +=
251 regVal & T1FRAMER_SEF_MASK;
252 }
253 spin_unlock_irqrestore(&sc->lmc_lock, flags);
254 if (copy_to_user(ifr->ifr_data, &sc->lmc_device->stats,
255 sizeof(sc->lmc_device->stats)) ||
256 copy_to_user(ifr->ifr_data + sizeof(sc->lmc_device->stats),
257 &sc->extra_stats, sizeof(sc->extra_stats)))
258 ret = -EFAULT;
259 else
260 ret = 0;
261 break;
262
263 case LMCIOCCLEARLMCSTATS:
264 if (!capable(CAP_NET_ADMIN)) {
265 ret = -EPERM;
266 break;
267 }
268
269 spin_lock_irqsave(&sc->lmc_lock, flags);
270 memset(&sc->lmc_device->stats, 0, sizeof(sc->lmc_device->stats));
271 memset(&sc->extra_stats, 0, sizeof(sc->extra_stats));
272 sc->extra_stats.check = STATCHECK;
273 sc->extra_stats.version_size = (DRIVER_VERSION << 16) +
274 sizeof(sc->lmc_device->stats) + sizeof(sc->extra_stats);
275 sc->extra_stats.lmc_cardtype = sc->lmc_cardtype;
276 spin_unlock_irqrestore(&sc->lmc_lock, flags);
277 ret = 0;
278 break;
279
280 case LMCIOCSETCIRCUIT: /*fold01*/
281 if (!capable(CAP_NET_ADMIN)){
282 ret = -EPERM;
283 break;
284 }
285
286 if(dev->flags & IFF_UP){
287 ret = -EBUSY;
288 break;
289 }
290
291 if (copy_from_user(&ctl, ifr->ifr_data, sizeof(lmc_ctl_t))) {
292 ret = -EFAULT;
293 break;
294 }
295 spin_lock_irqsave(&sc->lmc_lock, flags);
296 sc->lmc_media->set_circuit_type(sc, ctl.circuit_type);
297 sc->ictl.circuit_type = ctl.circuit_type;
298 spin_unlock_irqrestore(&sc->lmc_lock, flags);
299 ret = 0;
300
301 break;
302
303 case LMCIOCRESET: /*fold01*/
304 if (!capable(CAP_NET_ADMIN)){
305 ret = -EPERM;
306 break;
307 }
308
309 spin_lock_irqsave(&sc->lmc_lock, flags);
310 /* Reset driver and bring back to current state */
311 printk (" REG16 before reset +%04x\n", lmc_mii_readreg (sc, 0, 16));
312 lmc_running_reset (dev);
313 printk (" REG16 after reset +%04x\n", lmc_mii_readreg (sc, 0, 16));
314
315 LMC_EVENT_LOG(LMC_EVENT_FORCEDRESET, LMC_CSR_READ (sc, csr_status), lmc_mii_readreg (sc, 0, 16));
316 spin_unlock_irqrestore(&sc->lmc_lock, flags);
317
318 ret = 0;
319 break;
320
321 #ifdef DEBUG
322 case LMCIOCDUMPEVENTLOG:
323 if (copy_to_user(ifr->ifr_data, &lmcEventLogIndex, sizeof(u32))) {
324 ret = -EFAULT;
325 break;
326 }
327 if (copy_to_user(ifr->ifr_data + sizeof(u32), lmcEventLogBuf,
328 sizeof(lmcEventLogBuf)))
329 ret = -EFAULT;
330 else
331 ret = 0;
332
333 break;
334 #endif /* end ifdef _DBG_EVENTLOG */
335 case LMCIOCT1CONTROL: /*fold01*/
336 if (sc->lmc_cardtype != LMC_CARDTYPE_T1){
337 ret = -EOPNOTSUPP;
338 break;
339 }
340 break;
341 case LMCIOCXILINX: /*fold01*/
342 {
343 struct lmc_xilinx_control xc; /*fold02*/
344
345 if (!capable(CAP_NET_ADMIN)){
346 ret = -EPERM;
347 break;
348 }
349
350 /*
351 * Stop the xwitter whlie we restart the hardware
352 */
353 netif_stop_queue(dev);
354
355 if (copy_from_user(&xc, ifr->ifr_data, sizeof(struct lmc_xilinx_control))) {
356 ret = -EFAULT;
357 break;
358 }
359 switch(xc.command){
360 case lmc_xilinx_reset: /*fold02*/
361 {
362 u16 mii;
363 spin_lock_irqsave(&sc->lmc_lock, flags);
364 mii = lmc_mii_readreg (sc, 0, 16);
365
366 /*
367 * Make all of them 0 and make input
368 */
369 lmc_gpio_mkinput(sc, 0xff);
370
371 /*
372 * make the reset output
373 */
374 lmc_gpio_mkoutput(sc, LMC_GEP_RESET);
375
376 /*
377 * RESET low to force configuration. This also forces
378 * the transmitter clock to be internal, but we expect to reset
379 * that later anyway.
380 */
381
382 sc->lmc_gpio &= ~LMC_GEP_RESET;
383 LMC_CSR_WRITE(sc, csr_gp, sc->lmc_gpio);
384
385
386 /*
387 * hold for more than 10 microseconds
388 */
389 udelay(50);
390
391 sc->lmc_gpio |= LMC_GEP_RESET;
392 LMC_CSR_WRITE(sc, csr_gp, sc->lmc_gpio);
393
394
395 /*
396 * stop driving Xilinx-related signals
397 */
398 lmc_gpio_mkinput(sc, 0xff);
399
400 /* Reset the frammer hardware */
401 sc->lmc_media->set_link_status (sc, 1);
402 sc->lmc_media->set_status (sc, NULL);
403 // lmc_softreset(sc);
404
405 {
406 int i;
407 for(i = 0; i < 5; i++){
408 lmc_led_on(sc, LMC_DS3_LED0);
409 mdelay(100);
410 lmc_led_off(sc, LMC_DS3_LED0);
411 lmc_led_on(sc, LMC_DS3_LED1);
412 mdelay(100);
413 lmc_led_off(sc, LMC_DS3_LED1);
414 lmc_led_on(sc, LMC_DS3_LED3);
415 mdelay(100);
416 lmc_led_off(sc, LMC_DS3_LED3);
417 lmc_led_on(sc, LMC_DS3_LED2);
418 mdelay(100);
419 lmc_led_off(sc, LMC_DS3_LED2);
420 }
421 }
422 spin_unlock_irqrestore(&sc->lmc_lock, flags);
423
424
425
426 ret = 0x0;
427
428 }
429
430 break;
431 case lmc_xilinx_load_prom: /*fold02*/
432 {
433 u16 mii;
434 int timeout = 500000;
435 spin_lock_irqsave(&sc->lmc_lock, flags);
436 mii = lmc_mii_readreg (sc, 0, 16);
437
438 /*
439 * Make all of them 0 and make input
440 */
441 lmc_gpio_mkinput(sc, 0xff);
442
443 /*
444 * make the reset output
445 */
446 lmc_gpio_mkoutput(sc, LMC_GEP_DP | LMC_GEP_RESET);
447
448 /*
449 * RESET low to force configuration. This also forces
450 * the transmitter clock to be internal, but we expect to reset
451 * that later anyway.
452 */
453
454 sc->lmc_gpio &= ~(LMC_GEP_RESET | LMC_GEP_DP);
455 LMC_CSR_WRITE(sc, csr_gp, sc->lmc_gpio);
456
457
458 /*
459 * hold for more than 10 microseconds
460 */
461 udelay(50);
462
463 sc->lmc_gpio |= LMC_GEP_DP | LMC_GEP_RESET;
464 LMC_CSR_WRITE(sc, csr_gp, sc->lmc_gpio);
465
466 /*
467 * busy wait for the chip to reset
468 */
469 while( (LMC_CSR_READ(sc, csr_gp) & LMC_GEP_INIT) == 0 &&
470 (timeout-- > 0))
471 cpu_relax();
472
473
474 /*
475 * stop driving Xilinx-related signals
476 */
477 lmc_gpio_mkinput(sc, 0xff);
478 spin_unlock_irqrestore(&sc->lmc_lock, flags);
479
480 ret = 0x0;
481
482
483 break;
484
485 }
486
487 case lmc_xilinx_load: /*fold02*/
488 {
489 char *data;
490 int pos;
491 int timeout = 500000;
492
493 if (!xc.data) {
494 ret = -EINVAL;
495 break;
496 }
497
498 data = kmalloc(xc.len, GFP_KERNEL);
499 if (!data) {
500 ret = -ENOMEM;
501 break;
502 }
503
504 if(copy_from_user(data, xc.data, xc.len))
505 {
506 kfree(data);
507 ret = -ENOMEM;
508 break;
509 }
510
511 printk("%s: Starting load of data Len: %d at 0x%p == 0x%p\n", dev->name, xc.len, xc.data, data);
512
513 spin_lock_irqsave(&sc->lmc_lock, flags);
514 lmc_gpio_mkinput(sc, 0xff);
515
516 /*
517 * Clear the Xilinx and start prgramming from the DEC
518 */
519
520 /*
521 * Set ouput as:
522 * Reset: 0 (active)
523 * DP: 0 (active)
524 * Mode: 1
525 *
526 */
527 sc->lmc_gpio = 0x00;
528 sc->lmc_gpio &= ~LMC_GEP_DP;
529 sc->lmc_gpio &= ~LMC_GEP_RESET;
530 sc->lmc_gpio |= LMC_GEP_MODE;
531 LMC_CSR_WRITE(sc, csr_gp, sc->lmc_gpio);
532
533 lmc_gpio_mkoutput(sc, LMC_GEP_MODE | LMC_GEP_DP | LMC_GEP_RESET);
534
535 /*
536 * Wait at least 10 us 20 to be safe
537 */
538 udelay(50);
539
540 /*
541 * Clear reset and activate programming lines
542 * Reset: Input
543 * DP: Input
544 * Clock: Output
545 * Data: Output
546 * Mode: Output
547 */
548 lmc_gpio_mkinput(sc, LMC_GEP_DP | LMC_GEP_RESET);
549
550 /*
551 * Set LOAD, DATA, Clock to 1
552 */
553 sc->lmc_gpio = 0x00;
554 sc->lmc_gpio |= LMC_GEP_MODE;
555 sc->lmc_gpio |= LMC_GEP_DATA;
556 sc->lmc_gpio |= LMC_GEP_CLK;
557 LMC_CSR_WRITE(sc, csr_gp, sc->lmc_gpio);
558
559 lmc_gpio_mkoutput(sc, LMC_GEP_DATA | LMC_GEP_CLK | LMC_GEP_MODE );
560
561 /*
562 * busy wait for the chip to reset
563 */
564 while( (LMC_CSR_READ(sc, csr_gp) & LMC_GEP_INIT) == 0 &&
565 (timeout-- > 0))
566 cpu_relax();
567
568 printk(KERN_DEBUG "%s: Waited %d for the Xilinx to clear it's memory\n", dev->name, 500000-timeout);
569
570 for(pos = 0; pos < xc.len; pos++){
571 switch(data[pos]){
572 case 0:
573 sc->lmc_gpio &= ~LMC_GEP_DATA; /* Data is 0 */
574 break;
575 case 1:
576 sc->lmc_gpio |= LMC_GEP_DATA; /* Data is 1 */
577 break;
578 default:
579 printk(KERN_WARNING "%s Bad data in xilinx programming data at %d, got %d wanted 0 or 1\n", dev->name, pos, data[pos]);
580 sc->lmc_gpio |= LMC_GEP_DATA; /* Assume it's 1 */
581 }
582 sc->lmc_gpio &= ~LMC_GEP_CLK; /* Clock to zero */
583 sc->lmc_gpio |= LMC_GEP_MODE;
584 LMC_CSR_WRITE(sc, csr_gp, sc->lmc_gpio);
585 udelay(1);
586
587 sc->lmc_gpio |= LMC_GEP_CLK; /* Put the clack back to one */
588 sc->lmc_gpio |= LMC_GEP_MODE;
589 LMC_CSR_WRITE(sc, csr_gp, sc->lmc_gpio);
590 udelay(1);
591 }
592 if((LMC_CSR_READ(sc, csr_gp) & LMC_GEP_INIT) == 0){
593 printk(KERN_WARNING "%s: Reprogramming FAILED. Needs to be reprogrammed. (corrupted data)\n", dev->name);
594 }
595 else if((LMC_CSR_READ(sc, csr_gp) & LMC_GEP_DP) == 0){
596 printk(KERN_WARNING "%s: Reprogramming FAILED. Needs to be reprogrammed. (done)\n", dev->name);
597 }
598 else {
599 printk(KERN_DEBUG "%s: Done reprogramming Xilinx, %d bits, good luck!\n", dev->name, pos);
600 }
601
602 lmc_gpio_mkinput(sc, 0xff);
603
604 sc->lmc_miireg16 |= LMC_MII16_FIFO_RESET;
605 lmc_mii_writereg(sc, 0, 16, sc->lmc_miireg16);
606
607 sc->lmc_miireg16 &= ~LMC_MII16_FIFO_RESET;
608 lmc_mii_writereg(sc, 0, 16, sc->lmc_miireg16);
609 spin_unlock_irqrestore(&sc->lmc_lock, flags);
610
611 kfree(data);
612
613 ret = 0;
614
615 break;
616 }
617 default: /*fold02*/
618 ret = -EBADE;
619 break;
620 }
621
622 netif_wake_queue(dev);
623 sc->lmc_txfull = 0;
624
625 }
626 break;
627 default: /*fold01*/
628 /* If we don't know what to do, give the protocol a shot. */
629 ret = lmc_proto_ioctl (sc, ifr, cmd);
630 break;
631 }
632
633 lmc_trace(dev, "lmc_ioctl out");
634
635 return ret;
636 }
637
638
639 /* the watchdog process that cruises around */
lmc_watchdog(unsigned long data)640 static void lmc_watchdog (unsigned long data) /*fold00*/
641 {
642 struct net_device *dev = (struct net_device *)data;
643 lmc_softc_t *sc = dev_to_sc(dev);
644 int link_status;
645 u32 ticks;
646 unsigned long flags;
647
648 lmc_trace(dev, "lmc_watchdog in");
649
650 spin_lock_irqsave(&sc->lmc_lock, flags);
651
652 if(sc->check != 0xBEAFCAFE){
653 printk("LMC: Corrupt net_device struct, breaking out\n");
654 spin_unlock_irqrestore(&sc->lmc_lock, flags);
655 return;
656 }
657
658
659 /* Make sure the tx jabber and rx watchdog are off,
660 * and the transmit and receive processes are running.
661 */
662
663 LMC_CSR_WRITE (sc, csr_15, 0x00000011);
664 sc->lmc_cmdmode |= TULIP_CMD_TXRUN | TULIP_CMD_RXRUN;
665 LMC_CSR_WRITE (sc, csr_command, sc->lmc_cmdmode);
666
667 if (sc->lmc_ok == 0)
668 goto kick_timer;
669
670 LMC_EVENT_LOG(LMC_EVENT_WATCHDOG, LMC_CSR_READ (sc, csr_status), lmc_mii_readreg (sc, 0, 16));
671
672 /* --- begin time out check -----------------------------------
673 * check for a transmit interrupt timeout
674 * Has the packet xmt vs xmt serviced threshold been exceeded */
675 if (sc->lmc_taint_tx == sc->lastlmc_taint_tx &&
676 sc->lmc_device->stats.tx_packets > sc->lasttx_packets &&
677 sc->tx_TimeoutInd == 0)
678 {
679
680 /* wait for the watchdog to come around again */
681 sc->tx_TimeoutInd = 1;
682 }
683 else if (sc->lmc_taint_tx == sc->lastlmc_taint_tx &&
684 sc->lmc_device->stats.tx_packets > sc->lasttx_packets &&
685 sc->tx_TimeoutInd)
686 {
687
688 LMC_EVENT_LOG(LMC_EVENT_XMTINTTMO, LMC_CSR_READ (sc, csr_status), 0);
689
690 sc->tx_TimeoutDisplay = 1;
691 sc->extra_stats.tx_TimeoutCnt++;
692
693 /* DEC chip is stuck, hit it with a RESET!!!! */
694 lmc_running_reset (dev);
695
696
697 /* look at receive & transmit process state to make sure they are running */
698 LMC_EVENT_LOG(LMC_EVENT_RESET1, LMC_CSR_READ (sc, csr_status), 0);
699
700 /* look at: DSR - 02 for Reg 16
701 * CTS - 08
702 * DCD - 10
703 * RI - 20
704 * for Reg 17
705 */
706 LMC_EVENT_LOG(LMC_EVENT_RESET2, lmc_mii_readreg (sc, 0, 16), lmc_mii_readreg (sc, 0, 17));
707
708 /* reset the transmit timeout detection flag */
709 sc->tx_TimeoutInd = 0;
710 sc->lastlmc_taint_tx = sc->lmc_taint_tx;
711 sc->lasttx_packets = sc->lmc_device->stats.tx_packets;
712 } else {
713 sc->tx_TimeoutInd = 0;
714 sc->lastlmc_taint_tx = sc->lmc_taint_tx;
715 sc->lasttx_packets = sc->lmc_device->stats.tx_packets;
716 }
717
718 /* --- end time out check ----------------------------------- */
719
720
721 link_status = sc->lmc_media->get_link_status (sc);
722
723 /*
724 * hardware level link lost, but the interface is marked as up.
725 * Mark it as down.
726 */
727 if ((link_status == 0) && (sc->last_link_status != 0)) {
728 printk(KERN_WARNING "%s: hardware/physical link down\n", dev->name);
729 sc->last_link_status = 0;
730 /* lmc_reset (sc); Why reset??? The link can go down ok */
731
732 /* Inform the world that link has been lost */
733 netif_carrier_off(dev);
734 }
735
736 /*
737 * hardware link is up, but the interface is marked as down.
738 * Bring it back up again.
739 */
740 if (link_status != 0 && sc->last_link_status == 0) {
741 printk(KERN_WARNING "%s: hardware/physical link up\n", dev->name);
742 sc->last_link_status = 1;
743 /* lmc_reset (sc); Again why reset??? */
744
745 netif_carrier_on(dev);
746 }
747
748 /* Call media specific watchdog functions */
749 sc->lmc_media->watchdog(sc);
750
751 /*
752 * Poke the transmitter to make sure it
753 * never stops, even if we run out of mem
754 */
755 LMC_CSR_WRITE(sc, csr_rxpoll, 0);
756
757 /*
758 * Check for code that failed
759 * and try and fix it as appropriate
760 */
761 if(sc->failed_ring == 1){
762 /*
763 * Failed to setup the recv/xmit rin
764 * Try again
765 */
766 sc->failed_ring = 0;
767 lmc_softreset(sc);
768 }
769 if(sc->failed_recv_alloc == 1){
770 /*
771 * We failed to alloc mem in the
772 * interrupt handler, go through the rings
773 * and rebuild them
774 */
775 sc->failed_recv_alloc = 0;
776 lmc_softreset(sc);
777 }
778
779
780 /*
781 * remember the timer value
782 */
783 kick_timer:
784
785 ticks = LMC_CSR_READ (sc, csr_gp_timer);
786 LMC_CSR_WRITE (sc, csr_gp_timer, 0xffffffffUL);
787 sc->ictl.ticks = 0x0000ffff - (ticks & 0x0000ffff);
788
789 /*
790 * restart this timer.
791 */
792 sc->timer.expires = jiffies + (HZ);
793 add_timer (&sc->timer);
794
795 spin_unlock_irqrestore(&sc->lmc_lock, flags);
796
797 lmc_trace(dev, "lmc_watchdog out");
798
799 }
800
lmc_attach(struct net_device * dev,unsigned short encoding,unsigned short parity)801 static int lmc_attach(struct net_device *dev, unsigned short encoding,
802 unsigned short parity)
803 {
804 if (encoding == ENCODING_NRZ && parity == PARITY_CRC16_PR1_CCITT)
805 return 0;
806 return -EINVAL;
807 }
808
809 static const struct net_device_ops lmc_ops = {
810 .ndo_open = lmc_open,
811 .ndo_stop = lmc_close,
812 .ndo_change_mtu = hdlc_change_mtu,
813 .ndo_start_xmit = hdlc_start_xmit,
814 .ndo_do_ioctl = lmc_ioctl,
815 .ndo_tx_timeout = lmc_driver_timeout,
816 .ndo_get_stats = lmc_get_stats,
817 };
818
lmc_init_one(struct pci_dev * pdev,const struct pci_device_id * ent)819 static int __devinit lmc_init_one(struct pci_dev *pdev,
820 const struct pci_device_id *ent)
821 {
822 lmc_softc_t *sc;
823 struct net_device *dev;
824 u16 subdevice;
825 u16 AdapModelNum;
826 int err;
827 static int cards_found;
828
829 /* lmc_trace(dev, "lmc_init_one in"); */
830
831 err = pci_enable_device(pdev);
832 if (err) {
833 printk(KERN_ERR "lmc: pci enable failed: %d\n", err);
834 return err;
835 }
836
837 err = pci_request_regions(pdev, "lmc");
838 if (err) {
839 printk(KERN_ERR "lmc: pci_request_region failed\n");
840 goto err_req_io;
841 }
842
843 /*
844 * Allocate our own device structure
845 */
846 sc = kzalloc(sizeof(lmc_softc_t), GFP_KERNEL);
847 if (!sc) {
848 err = -ENOMEM;
849 goto err_kzalloc;
850 }
851
852 dev = alloc_hdlcdev(sc);
853 if (!dev) {
854 printk(KERN_ERR "lmc:alloc_netdev for device failed\n");
855 goto err_hdlcdev;
856 }
857
858
859 dev->type = ARPHRD_HDLC;
860 dev_to_hdlc(dev)->xmit = lmc_start_xmit;
861 dev_to_hdlc(dev)->attach = lmc_attach;
862 dev->netdev_ops = &lmc_ops;
863 dev->watchdog_timeo = HZ; /* 1 second */
864 dev->tx_queue_len = 100;
865 sc->lmc_device = dev;
866 sc->name = dev->name;
867 sc->if_type = LMC_PPP;
868 sc->check = 0xBEAFCAFE;
869 dev->base_addr = pci_resource_start(pdev, 0);
870 dev->irq = pdev->irq;
871 pci_set_drvdata(pdev, dev);
872 SET_NETDEV_DEV(dev, &pdev->dev);
873
874 /*
875 * This will get the protocol layer ready and do any 1 time init's
876 * Must have a valid sc and dev structure
877 */
878 lmc_proto_attach(sc);
879
880 /* Init the spin lock so can call it latter */
881
882 spin_lock_init(&sc->lmc_lock);
883 pci_set_master(pdev);
884
885 printk(KERN_INFO "%s: detected at %lx, irq %d\n", dev->name,
886 dev->base_addr, dev->irq);
887
888 err = register_hdlc_device(dev);
889 if (err) {
890 printk(KERN_ERR "%s: register_netdev failed.\n", dev->name);
891 free_netdev(dev);
892 goto err_hdlcdev;
893 }
894
895 sc->lmc_cardtype = LMC_CARDTYPE_UNKNOWN;
896 sc->lmc_timing = LMC_CTL_CLOCK_SOURCE_EXT;
897
898 /*
899 *
900 * Check either the subvendor or the subdevice, some systems reverse
901 * the setting in the bois, seems to be version and arch dependent?
902 * Fix the error, exchange the two values
903 */
904 if ((subdevice = pdev->subsystem_device) == PCI_VENDOR_ID_LMC)
905 subdevice = pdev->subsystem_vendor;
906
907 switch (subdevice) {
908 case PCI_DEVICE_ID_LMC_HSSI:
909 printk(KERN_INFO "%s: LMC HSSI\n", dev->name);
910 sc->lmc_cardtype = LMC_CARDTYPE_HSSI;
911 sc->lmc_media = &lmc_hssi_media;
912 break;
913 case PCI_DEVICE_ID_LMC_DS3:
914 printk(KERN_INFO "%s: LMC DS3\n", dev->name);
915 sc->lmc_cardtype = LMC_CARDTYPE_DS3;
916 sc->lmc_media = &lmc_ds3_media;
917 break;
918 case PCI_DEVICE_ID_LMC_SSI:
919 printk(KERN_INFO "%s: LMC SSI\n", dev->name);
920 sc->lmc_cardtype = LMC_CARDTYPE_SSI;
921 sc->lmc_media = &lmc_ssi_media;
922 break;
923 case PCI_DEVICE_ID_LMC_T1:
924 printk(KERN_INFO "%s: LMC T1\n", dev->name);
925 sc->lmc_cardtype = LMC_CARDTYPE_T1;
926 sc->lmc_media = &lmc_t1_media;
927 break;
928 default:
929 printk(KERN_WARNING "%s: LMC UNKNOWN CARD!\n", dev->name);
930 break;
931 }
932
933 lmc_initcsrs (sc, dev->base_addr, 8);
934
935 lmc_gpio_mkinput (sc, 0xff);
936 sc->lmc_gpio = 0; /* drive no signals yet */
937
938 sc->lmc_media->defaults (sc);
939
940 sc->lmc_media->set_link_status (sc, LMC_LINK_UP);
941
942 /* verify that the PCI Sub System ID matches the Adapter Model number
943 * from the MII register
944 */
945 AdapModelNum = (lmc_mii_readreg (sc, 0, 3) & 0x3f0) >> 4;
946
947 if ((AdapModelNum != LMC_ADAP_T1 || /* detect LMC1200 */
948 subdevice != PCI_DEVICE_ID_LMC_T1) &&
949 (AdapModelNum != LMC_ADAP_SSI || /* detect LMC1000 */
950 subdevice != PCI_DEVICE_ID_LMC_SSI) &&
951 (AdapModelNum != LMC_ADAP_DS3 || /* detect LMC5245 */
952 subdevice != PCI_DEVICE_ID_LMC_DS3) &&
953 (AdapModelNum != LMC_ADAP_HSSI || /* detect LMC5200 */
954 subdevice != PCI_DEVICE_ID_LMC_HSSI))
955 printk(KERN_WARNING "%s: Model number (%d) miscompare for PCI"
956 " Subsystem ID = 0x%04x\n",
957 dev->name, AdapModelNum, subdevice);
958
959 /*
960 * reset clock
961 */
962 LMC_CSR_WRITE (sc, csr_gp_timer, 0xFFFFFFFFUL);
963
964 sc->board_idx = cards_found++;
965 sc->extra_stats.check = STATCHECK;
966 sc->extra_stats.version_size = (DRIVER_VERSION << 16) +
967 sizeof(sc->lmc_device->stats) + sizeof(sc->extra_stats);
968 sc->extra_stats.lmc_cardtype = sc->lmc_cardtype;
969
970 sc->lmc_ok = 0;
971 sc->last_link_status = 0;
972
973 lmc_trace(dev, "lmc_init_one out");
974 return 0;
975
976 err_hdlcdev:
977 pci_set_drvdata(pdev, NULL);
978 kfree(sc);
979 err_kzalloc:
980 pci_release_regions(pdev);
981 err_req_io:
982 pci_disable_device(pdev);
983 return err;
984 }
985
986 /*
987 * Called from pci when removing module.
988 */
lmc_remove_one(struct pci_dev * pdev)989 static void __devexit lmc_remove_one(struct pci_dev *pdev)
990 {
991 struct net_device *dev = pci_get_drvdata(pdev);
992
993 if (dev) {
994 printk(KERN_DEBUG "%s: removing...\n", dev->name);
995 unregister_hdlc_device(dev);
996 free_netdev(dev);
997 pci_release_regions(pdev);
998 pci_disable_device(pdev);
999 pci_set_drvdata(pdev, NULL);
1000 }
1001 }
1002
1003 /* After this is called, packets can be sent.
1004 * Does not initialize the addresses
1005 */
lmc_open(struct net_device * dev)1006 static int lmc_open(struct net_device *dev)
1007 {
1008 lmc_softc_t *sc = dev_to_sc(dev);
1009 int err;
1010
1011 lmc_trace(dev, "lmc_open in");
1012
1013 lmc_led_on(sc, LMC_DS3_LED0);
1014
1015 lmc_dec_reset(sc);
1016 lmc_reset(sc);
1017
1018 LMC_EVENT_LOG(LMC_EVENT_RESET1, LMC_CSR_READ(sc, csr_status), 0);
1019 LMC_EVENT_LOG(LMC_EVENT_RESET2, lmc_mii_readreg(sc, 0, 16),
1020 lmc_mii_readreg(sc, 0, 17));
1021
1022 if (sc->lmc_ok){
1023 lmc_trace(dev, "lmc_open lmc_ok out");
1024 return 0;
1025 }
1026
1027 lmc_softreset (sc);
1028
1029 /* Since we have to use PCI bus, this should work on x86,alpha,ppc */
1030 if (request_irq (dev->irq, lmc_interrupt, IRQF_SHARED, dev->name, dev)){
1031 printk(KERN_WARNING "%s: could not get irq: %d\n", dev->name, dev->irq);
1032 lmc_trace(dev, "lmc_open irq failed out");
1033 return -EAGAIN;
1034 }
1035 sc->got_irq = 1;
1036
1037 /* Assert Terminal Active */
1038 sc->lmc_miireg16 |= LMC_MII16_LED_ALL;
1039 sc->lmc_media->set_link_status (sc, LMC_LINK_UP);
1040
1041 /*
1042 * reset to last state.
1043 */
1044 sc->lmc_media->set_status (sc, NULL);
1045
1046 /* setup default bits to be used in tulip_desc_t transmit descriptor
1047 * -baz */
1048 sc->TxDescriptControlInit = (
1049 LMC_TDES_INTERRUPT_ON_COMPLETION
1050 | LMC_TDES_FIRST_SEGMENT
1051 | LMC_TDES_LAST_SEGMENT
1052 | LMC_TDES_SECOND_ADDR_CHAINED
1053 | LMC_TDES_DISABLE_PADDING
1054 );
1055
1056 if (sc->ictl.crc_length == LMC_CTL_CRC_LENGTH_16) {
1057 /* disable 32 bit CRC generated by ASIC */
1058 sc->TxDescriptControlInit |= LMC_TDES_ADD_CRC_DISABLE;
1059 }
1060 sc->lmc_media->set_crc_length(sc, sc->ictl.crc_length);
1061 /* Acknoledge the Terminal Active and light LEDs */
1062
1063 /* dev->flags |= IFF_UP; */
1064
1065 if ((err = lmc_proto_open(sc)) != 0)
1066 return err;
1067
1068 netif_start_queue(dev);
1069 sc->extra_stats.tx_tbusy0++;
1070
1071 /*
1072 * select what interrupts we want to get
1073 */
1074 sc->lmc_intrmask = 0;
1075 /* Should be using the default interrupt mask defined in the .h file. */
1076 sc->lmc_intrmask |= (TULIP_STS_NORMALINTR
1077 | TULIP_STS_RXINTR
1078 | TULIP_STS_TXINTR
1079 | TULIP_STS_ABNRMLINTR
1080 | TULIP_STS_SYSERROR
1081 | TULIP_STS_TXSTOPPED
1082 | TULIP_STS_TXUNDERFLOW
1083 | TULIP_STS_RXSTOPPED
1084 | TULIP_STS_RXNOBUF
1085 );
1086 LMC_CSR_WRITE (sc, csr_intr, sc->lmc_intrmask);
1087
1088 sc->lmc_cmdmode |= TULIP_CMD_TXRUN;
1089 sc->lmc_cmdmode |= TULIP_CMD_RXRUN;
1090 LMC_CSR_WRITE (sc, csr_command, sc->lmc_cmdmode);
1091
1092 sc->lmc_ok = 1; /* Run watchdog */
1093
1094 /*
1095 * Set the if up now - pfb
1096 */
1097
1098 sc->last_link_status = 1;
1099
1100 /*
1101 * Setup a timer for the watchdog on probe, and start it running.
1102 * Since lmc_ok == 0, it will be a NOP for now.
1103 */
1104 init_timer (&sc->timer);
1105 sc->timer.expires = jiffies + HZ;
1106 sc->timer.data = (unsigned long) dev;
1107 sc->timer.function = lmc_watchdog;
1108 add_timer (&sc->timer);
1109
1110 lmc_trace(dev, "lmc_open out");
1111
1112 return 0;
1113 }
1114
1115 /* Total reset to compensate for the AdTran DSU doing bad things
1116 * under heavy load
1117 */
1118
lmc_running_reset(struct net_device * dev)1119 static void lmc_running_reset (struct net_device *dev) /*fold00*/
1120 {
1121 lmc_softc_t *sc = dev_to_sc(dev);
1122
1123 lmc_trace(dev, "lmc_runnig_reset in");
1124
1125 /* stop interrupts */
1126 /* Clear the interrupt mask */
1127 LMC_CSR_WRITE (sc, csr_intr, 0x00000000);
1128
1129 lmc_dec_reset (sc);
1130 lmc_reset (sc);
1131 lmc_softreset (sc);
1132 /* sc->lmc_miireg16 |= LMC_MII16_LED_ALL; */
1133 sc->lmc_media->set_link_status (sc, 1);
1134 sc->lmc_media->set_status (sc, NULL);
1135
1136 netif_wake_queue(dev);
1137
1138 sc->lmc_txfull = 0;
1139 sc->extra_stats.tx_tbusy0++;
1140
1141 sc->lmc_intrmask = TULIP_DEFAULT_INTR_MASK;
1142 LMC_CSR_WRITE (sc, csr_intr, sc->lmc_intrmask);
1143
1144 sc->lmc_cmdmode |= (TULIP_CMD_TXRUN | TULIP_CMD_RXRUN);
1145 LMC_CSR_WRITE (sc, csr_command, sc->lmc_cmdmode);
1146
1147 lmc_trace(dev, "lmc_runnin_reset_out");
1148 }
1149
1150
1151 /* This is what is called when you ifconfig down a device.
1152 * This disables the timer for the watchdog and keepalives,
1153 * and disables the irq for dev.
1154 */
lmc_close(struct net_device * dev)1155 static int lmc_close(struct net_device *dev)
1156 {
1157 /* not calling release_region() as we should */
1158 lmc_softc_t *sc = dev_to_sc(dev);
1159
1160 lmc_trace(dev, "lmc_close in");
1161
1162 sc->lmc_ok = 0;
1163 sc->lmc_media->set_link_status (sc, 0);
1164 del_timer (&sc->timer);
1165 lmc_proto_close(sc);
1166 lmc_ifdown (dev);
1167
1168 lmc_trace(dev, "lmc_close out");
1169
1170 return 0;
1171 }
1172
1173 /* Ends the transfer of packets */
1174 /* When the interface goes down, this is called */
lmc_ifdown(struct net_device * dev)1175 static int lmc_ifdown (struct net_device *dev) /*fold00*/
1176 {
1177 lmc_softc_t *sc = dev_to_sc(dev);
1178 u32 csr6;
1179 int i;
1180
1181 lmc_trace(dev, "lmc_ifdown in");
1182
1183 /* Don't let anything else go on right now */
1184 // dev->start = 0;
1185 netif_stop_queue(dev);
1186 sc->extra_stats.tx_tbusy1++;
1187
1188 /* stop interrupts */
1189 /* Clear the interrupt mask */
1190 LMC_CSR_WRITE (sc, csr_intr, 0x00000000);
1191
1192 /* Stop Tx and Rx on the chip */
1193 csr6 = LMC_CSR_READ (sc, csr_command);
1194 csr6 &= ~LMC_DEC_ST; /* Turn off the Transmission bit */
1195 csr6 &= ~LMC_DEC_SR; /* Turn off the Receive bit */
1196 LMC_CSR_WRITE (sc, csr_command, csr6);
1197
1198 sc->lmc_device->stats.rx_missed_errors +=
1199 LMC_CSR_READ(sc, csr_missed_frames) & 0xffff;
1200
1201 /* release the interrupt */
1202 if(sc->got_irq == 1){
1203 free_irq (dev->irq, dev);
1204 sc->got_irq = 0;
1205 }
1206
1207 /* free skbuffs in the Rx queue */
1208 for (i = 0; i < LMC_RXDESCS; i++)
1209 {
1210 struct sk_buff *skb = sc->lmc_rxq[i];
1211 sc->lmc_rxq[i] = NULL;
1212 sc->lmc_rxring[i].status = 0;
1213 sc->lmc_rxring[i].length = 0;
1214 sc->lmc_rxring[i].buffer1 = 0xDEADBEEF;
1215 if (skb != NULL)
1216 dev_kfree_skb(skb);
1217 sc->lmc_rxq[i] = NULL;
1218 }
1219
1220 for (i = 0; i < LMC_TXDESCS; i++)
1221 {
1222 if (sc->lmc_txq[i] != NULL)
1223 dev_kfree_skb(sc->lmc_txq[i]);
1224 sc->lmc_txq[i] = NULL;
1225 }
1226
1227 lmc_led_off (sc, LMC_MII16_LED_ALL);
1228
1229 netif_wake_queue(dev);
1230 sc->extra_stats.tx_tbusy0++;
1231
1232 lmc_trace(dev, "lmc_ifdown out");
1233
1234 return 0;
1235 }
1236
1237 /* Interrupt handling routine. This will take an incoming packet, or clean
1238 * up after a trasmit.
1239 */
lmc_interrupt(int irq,void * dev_instance)1240 static irqreturn_t lmc_interrupt (int irq, void *dev_instance) /*fold00*/
1241 {
1242 struct net_device *dev = (struct net_device *) dev_instance;
1243 lmc_softc_t *sc = dev_to_sc(dev);
1244 u32 csr;
1245 int i;
1246 s32 stat;
1247 unsigned int badtx;
1248 u32 firstcsr;
1249 int max_work = LMC_RXDESCS;
1250 int handled = 0;
1251
1252 lmc_trace(dev, "lmc_interrupt in");
1253
1254 spin_lock(&sc->lmc_lock);
1255
1256 /*
1257 * Read the csr to find what interrupts we have (if any)
1258 */
1259 csr = LMC_CSR_READ (sc, csr_status);
1260
1261 /*
1262 * Make sure this is our interrupt
1263 */
1264 if ( ! (csr & sc->lmc_intrmask)) {
1265 goto lmc_int_fail_out;
1266 }
1267
1268 firstcsr = csr;
1269
1270 /* always go through this loop at least once */
1271 while (csr & sc->lmc_intrmask) {
1272 handled = 1;
1273
1274 /*
1275 * Clear interrupt bits, we handle all case below
1276 */
1277 LMC_CSR_WRITE (sc, csr_status, csr);
1278
1279 /*
1280 * One of
1281 * - Transmit process timed out CSR5<1>
1282 * - Transmit jabber timeout CSR5<3>
1283 * - Transmit underflow CSR5<5>
1284 * - Transmit Receiver buffer unavailable CSR5<7>
1285 * - Receive process stopped CSR5<8>
1286 * - Receive watchdog timeout CSR5<9>
1287 * - Early transmit interrupt CSR5<10>
1288 *
1289 * Is this really right? Should we do a running reset for jabber?
1290 * (being a WAN card and all)
1291 */
1292 if (csr & TULIP_STS_ABNRMLINTR){
1293 lmc_running_reset (dev);
1294 break;
1295 }
1296
1297 if (csr & TULIP_STS_RXINTR){
1298 lmc_trace(dev, "rx interrupt");
1299 lmc_rx (dev);
1300
1301 }
1302 if (csr & (TULIP_STS_TXINTR | TULIP_STS_TXNOBUF | TULIP_STS_TXSTOPPED)) {
1303
1304 int n_compl = 0 ;
1305 /* reset the transmit timeout detection flag -baz */
1306 sc->extra_stats.tx_NoCompleteCnt = 0;
1307
1308 badtx = sc->lmc_taint_tx;
1309 i = badtx % LMC_TXDESCS;
1310
1311 while ((badtx < sc->lmc_next_tx)) {
1312 stat = sc->lmc_txring[i].status;
1313
1314 LMC_EVENT_LOG (LMC_EVENT_XMTINT, stat,
1315 sc->lmc_txring[i].length);
1316 /*
1317 * If bit 31 is 1 the tulip owns it break out of the loop
1318 */
1319 if (stat & 0x80000000)
1320 break;
1321
1322 n_compl++ ; /* i.e., have an empty slot in ring */
1323 /*
1324 * If we have no skbuff or have cleared it
1325 * Already continue to the next buffer
1326 */
1327 if (sc->lmc_txq[i] == NULL)
1328 continue;
1329
1330 /*
1331 * Check the total error summary to look for any errors
1332 */
1333 if (stat & 0x8000) {
1334 sc->lmc_device->stats.tx_errors++;
1335 if (stat & 0x4104)
1336 sc->lmc_device->stats.tx_aborted_errors++;
1337 if (stat & 0x0C00)
1338 sc->lmc_device->stats.tx_carrier_errors++;
1339 if (stat & 0x0200)
1340 sc->lmc_device->stats.tx_window_errors++;
1341 if (stat & 0x0002)
1342 sc->lmc_device->stats.tx_fifo_errors++;
1343 } else {
1344 sc->lmc_device->stats.tx_bytes += sc->lmc_txring[i].length & 0x7ff;
1345
1346 sc->lmc_device->stats.tx_packets++;
1347 }
1348
1349 // dev_kfree_skb(sc->lmc_txq[i]);
1350 dev_kfree_skb_irq(sc->lmc_txq[i]);
1351 sc->lmc_txq[i] = NULL;
1352
1353 badtx++;
1354 i = badtx % LMC_TXDESCS;
1355 }
1356
1357 if (sc->lmc_next_tx - badtx > LMC_TXDESCS)
1358 {
1359 printk ("%s: out of sync pointer\n", dev->name);
1360 badtx += LMC_TXDESCS;
1361 }
1362 LMC_EVENT_LOG(LMC_EVENT_TBUSY0, n_compl, 0);
1363 sc->lmc_txfull = 0;
1364 netif_wake_queue(dev);
1365 sc->extra_stats.tx_tbusy0++;
1366
1367
1368 #ifdef DEBUG
1369 sc->extra_stats.dirtyTx = badtx;
1370 sc->extra_stats.lmc_next_tx = sc->lmc_next_tx;
1371 sc->extra_stats.lmc_txfull = sc->lmc_txfull;
1372 #endif
1373 sc->lmc_taint_tx = badtx;
1374
1375 /*
1376 * Why was there a break here???
1377 */
1378 } /* end handle transmit interrupt */
1379
1380 if (csr & TULIP_STS_SYSERROR) {
1381 u32 error;
1382 printk (KERN_WARNING "%s: system bus error csr: %#8.8x\n", dev->name, csr);
1383 error = csr>>23 & 0x7;
1384 switch(error){
1385 case 0x000:
1386 printk(KERN_WARNING "%s: Parity Fault (bad)\n", dev->name);
1387 break;
1388 case 0x001:
1389 printk(KERN_WARNING "%s: Master Abort (naughty)\n", dev->name);
1390 break;
1391 case 0x010:
1392 printk(KERN_WARNING "%s: Target Abort (not so naughty)\n", dev->name);
1393 break;
1394 default:
1395 printk(KERN_WARNING "%s: This bus error code was supposed to be reserved!\n", dev->name);
1396 }
1397 lmc_dec_reset (sc);
1398 lmc_reset (sc);
1399 LMC_EVENT_LOG(LMC_EVENT_RESET1, LMC_CSR_READ (sc, csr_status), 0);
1400 LMC_EVENT_LOG(LMC_EVENT_RESET2,
1401 lmc_mii_readreg (sc, 0, 16),
1402 lmc_mii_readreg (sc, 0, 17));
1403
1404 }
1405
1406
1407 if(max_work-- <= 0)
1408 break;
1409
1410 /*
1411 * Get current csr status to make sure
1412 * we've cleared all interrupts
1413 */
1414 csr = LMC_CSR_READ (sc, csr_status);
1415 } /* end interrupt loop */
1416 LMC_EVENT_LOG(LMC_EVENT_INT, firstcsr, csr);
1417
1418 lmc_int_fail_out:
1419
1420 spin_unlock(&sc->lmc_lock);
1421
1422 lmc_trace(dev, "lmc_interrupt out");
1423 return IRQ_RETVAL(handled);
1424 }
1425
lmc_start_xmit(struct sk_buff * skb,struct net_device * dev)1426 static netdev_tx_t lmc_start_xmit(struct sk_buff *skb,
1427 struct net_device *dev)
1428 {
1429 lmc_softc_t *sc = dev_to_sc(dev);
1430 u32 flag;
1431 int entry;
1432 unsigned long flags;
1433
1434 lmc_trace(dev, "lmc_start_xmit in");
1435
1436 spin_lock_irqsave(&sc->lmc_lock, flags);
1437
1438 /* normal path, tbusy known to be zero */
1439
1440 entry = sc->lmc_next_tx % LMC_TXDESCS;
1441
1442 sc->lmc_txq[entry] = skb;
1443 sc->lmc_txring[entry].buffer1 = virt_to_bus (skb->data);
1444
1445 LMC_CONSOLE_LOG("xmit", skb->data, skb->len);
1446
1447 #ifndef GCOM
1448 /* If the queue is less than half full, don't interrupt */
1449 if (sc->lmc_next_tx - sc->lmc_taint_tx < LMC_TXDESCS / 2)
1450 {
1451 /* Do not interrupt on completion of this packet */
1452 flag = 0x60000000;
1453 netif_wake_queue(dev);
1454 }
1455 else if (sc->lmc_next_tx - sc->lmc_taint_tx == LMC_TXDESCS / 2)
1456 {
1457 /* This generates an interrupt on completion of this packet */
1458 flag = 0xe0000000;
1459 netif_wake_queue(dev);
1460 }
1461 else if (sc->lmc_next_tx - sc->lmc_taint_tx < LMC_TXDESCS - 1)
1462 {
1463 /* Do not interrupt on completion of this packet */
1464 flag = 0x60000000;
1465 netif_wake_queue(dev);
1466 }
1467 else
1468 {
1469 /* This generates an interrupt on completion of this packet */
1470 flag = 0xe0000000;
1471 sc->lmc_txfull = 1;
1472 netif_stop_queue(dev);
1473 }
1474 #else
1475 flag = LMC_TDES_INTERRUPT_ON_COMPLETION;
1476
1477 if (sc->lmc_next_tx - sc->lmc_taint_tx >= LMC_TXDESCS - 1)
1478 { /* ring full, go busy */
1479 sc->lmc_txfull = 1;
1480 netif_stop_queue(dev);
1481 sc->extra_stats.tx_tbusy1++;
1482 LMC_EVENT_LOG(LMC_EVENT_TBUSY1, entry, 0);
1483 }
1484 #endif
1485
1486
1487 if (entry == LMC_TXDESCS - 1) /* last descriptor in ring */
1488 flag |= LMC_TDES_END_OF_RING; /* flag as such for Tulip */
1489
1490 /* don't pad small packets either */
1491 flag = sc->lmc_txring[entry].length = (skb->len) | flag |
1492 sc->TxDescriptControlInit;
1493
1494 /* set the transmit timeout flag to be checked in
1495 * the watchdog timer handler. -baz
1496 */
1497
1498 sc->extra_stats.tx_NoCompleteCnt++;
1499 sc->lmc_next_tx++;
1500
1501 /* give ownership to the chip */
1502 LMC_EVENT_LOG(LMC_EVENT_XMT, flag, entry);
1503 sc->lmc_txring[entry].status = 0x80000000;
1504
1505 /* send now! */
1506 LMC_CSR_WRITE (sc, csr_txpoll, 0);
1507
1508 spin_unlock_irqrestore(&sc->lmc_lock, flags);
1509
1510 lmc_trace(dev, "lmc_start_xmit_out");
1511 return NETDEV_TX_OK;
1512 }
1513
1514
lmc_rx(struct net_device * dev)1515 static int lmc_rx(struct net_device *dev)
1516 {
1517 lmc_softc_t *sc = dev_to_sc(dev);
1518 int i;
1519 int rx_work_limit = LMC_RXDESCS;
1520 unsigned int next_rx;
1521 int rxIntLoopCnt; /* debug -baz */
1522 int localLengthErrCnt = 0;
1523 long stat;
1524 struct sk_buff *skb, *nsb;
1525 u16 len;
1526
1527 lmc_trace(dev, "lmc_rx in");
1528
1529 lmc_led_on(sc, LMC_DS3_LED3);
1530
1531 rxIntLoopCnt = 0; /* debug -baz */
1532
1533 i = sc->lmc_next_rx % LMC_RXDESCS;
1534 next_rx = sc->lmc_next_rx;
1535
1536 while (((stat = sc->lmc_rxring[i].status) & LMC_RDES_OWN_BIT) != DESC_OWNED_BY_DC21X4)
1537 {
1538 rxIntLoopCnt++; /* debug -baz */
1539 len = ((stat & LMC_RDES_FRAME_LENGTH) >> RDES_FRAME_LENGTH_BIT_NUMBER);
1540 if ((stat & 0x0300) != 0x0300) { /* Check first segment and last segment */
1541 if ((stat & 0x0000ffff) != 0x7fff) {
1542 /* Oversized frame */
1543 sc->lmc_device->stats.rx_length_errors++;
1544 goto skip_packet;
1545 }
1546 }
1547
1548 if (stat & 0x00000008) { /* Catch a dribbling bit error */
1549 sc->lmc_device->stats.rx_errors++;
1550 sc->lmc_device->stats.rx_frame_errors++;
1551 goto skip_packet;
1552 }
1553
1554
1555 if (stat & 0x00000004) { /* Catch a CRC error by the Xilinx */
1556 sc->lmc_device->stats.rx_errors++;
1557 sc->lmc_device->stats.rx_crc_errors++;
1558 goto skip_packet;
1559 }
1560
1561 if (len > LMC_PKT_BUF_SZ) {
1562 sc->lmc_device->stats.rx_length_errors++;
1563 localLengthErrCnt++;
1564 goto skip_packet;
1565 }
1566
1567 if (len < sc->lmc_crcSize + 2) {
1568 sc->lmc_device->stats.rx_length_errors++;
1569 sc->extra_stats.rx_SmallPktCnt++;
1570 localLengthErrCnt++;
1571 goto skip_packet;
1572 }
1573
1574 if(stat & 0x00004000){
1575 printk(KERN_WARNING "%s: Receiver descriptor error, receiver out of sync?\n", dev->name);
1576 }
1577
1578 len -= sc->lmc_crcSize;
1579
1580 skb = sc->lmc_rxq[i];
1581
1582 /*
1583 * We ran out of memory at some point
1584 * just allocate an skb buff and continue.
1585 */
1586
1587 if (!skb) {
1588 nsb = dev_alloc_skb (LMC_PKT_BUF_SZ + 2);
1589 if (nsb) {
1590 sc->lmc_rxq[i] = nsb;
1591 nsb->dev = dev;
1592 sc->lmc_rxring[i].buffer1 = virt_to_bus(skb_tail_pointer(nsb));
1593 }
1594 sc->failed_recv_alloc = 1;
1595 goto skip_packet;
1596 }
1597
1598 sc->lmc_device->stats.rx_packets++;
1599 sc->lmc_device->stats.rx_bytes += len;
1600
1601 LMC_CONSOLE_LOG("recv", skb->data, len);
1602
1603 /*
1604 * I'm not sure of the sanity of this
1605 * Packets could be arriving at a constant
1606 * 44.210mbits/sec and we're going to copy
1607 * them into a new buffer??
1608 */
1609
1610 if(len > (LMC_MTU - (LMC_MTU>>2))){ /* len > LMC_MTU * 0.75 */
1611 /*
1612 * If it's a large packet don't copy it just hand it up
1613 */
1614 give_it_anyways:
1615
1616 sc->lmc_rxq[i] = NULL;
1617 sc->lmc_rxring[i].buffer1 = 0x0;
1618
1619 skb_put (skb, len);
1620 skb->protocol = lmc_proto_type(sc, skb);
1621 skb_reset_mac_header(skb);
1622 /* skb_reset_network_header(skb); */
1623 skb->dev = dev;
1624 lmc_proto_netif(sc, skb);
1625
1626 /*
1627 * This skb will be destroyed by the upper layers, make a new one
1628 */
1629 nsb = dev_alloc_skb (LMC_PKT_BUF_SZ + 2);
1630 if (nsb) {
1631 sc->lmc_rxq[i] = nsb;
1632 nsb->dev = dev;
1633 sc->lmc_rxring[i].buffer1 = virt_to_bus(skb_tail_pointer(nsb));
1634 /* Transferred to 21140 below */
1635 }
1636 else {
1637 /*
1638 * We've run out of memory, stop trying to allocate
1639 * memory and exit the interrupt handler
1640 *
1641 * The chip may run out of receivers and stop
1642 * in which care we'll try to allocate the buffer
1643 * again. (once a second)
1644 */
1645 sc->extra_stats.rx_BuffAllocErr++;
1646 LMC_EVENT_LOG(LMC_EVENT_RCVINT, stat, len);
1647 sc->failed_recv_alloc = 1;
1648 goto skip_out_of_mem;
1649 }
1650 }
1651 else {
1652 nsb = dev_alloc_skb(len);
1653 if(!nsb) {
1654 goto give_it_anyways;
1655 }
1656 skb_copy_from_linear_data(skb, skb_put(nsb, len), len);
1657
1658 nsb->protocol = lmc_proto_type(sc, nsb);
1659 skb_reset_mac_header(nsb);
1660 /* skb_reset_network_header(nsb); */
1661 nsb->dev = dev;
1662 lmc_proto_netif(sc, nsb);
1663 }
1664
1665 skip_packet:
1666 LMC_EVENT_LOG(LMC_EVENT_RCVINT, stat, len);
1667 sc->lmc_rxring[i].status = DESC_OWNED_BY_DC21X4;
1668
1669 sc->lmc_next_rx++;
1670 i = sc->lmc_next_rx % LMC_RXDESCS;
1671 rx_work_limit--;
1672 if (rx_work_limit < 0)
1673 break;
1674 }
1675
1676 /* detect condition for LMC1000 where DSU cable attaches and fills
1677 * descriptors with bogus packets
1678 *
1679 if (localLengthErrCnt > LMC_RXDESCS - 3) {
1680 sc->extra_stats.rx_BadPktSurgeCnt++;
1681 LMC_EVENT_LOG(LMC_EVENT_BADPKTSURGE, localLengthErrCnt,
1682 sc->extra_stats.rx_BadPktSurgeCnt);
1683 } */
1684
1685 /* save max count of receive descriptors serviced */
1686 if (rxIntLoopCnt > sc->extra_stats.rxIntLoopCnt)
1687 sc->extra_stats.rxIntLoopCnt = rxIntLoopCnt; /* debug -baz */
1688
1689 #ifdef DEBUG
1690 if (rxIntLoopCnt == 0)
1691 {
1692 for (i = 0; i < LMC_RXDESCS; i++)
1693 {
1694 if ((sc->lmc_rxring[i].status & LMC_RDES_OWN_BIT)
1695 != DESC_OWNED_BY_DC21X4)
1696 {
1697 rxIntLoopCnt++;
1698 }
1699 }
1700 LMC_EVENT_LOG(LMC_EVENT_RCVEND, rxIntLoopCnt, 0);
1701 }
1702 #endif
1703
1704
1705 lmc_led_off(sc, LMC_DS3_LED3);
1706
1707 skip_out_of_mem:
1708
1709 lmc_trace(dev, "lmc_rx out");
1710
1711 return 0;
1712 }
1713
lmc_get_stats(struct net_device * dev)1714 static struct net_device_stats *lmc_get_stats(struct net_device *dev)
1715 {
1716 lmc_softc_t *sc = dev_to_sc(dev);
1717 unsigned long flags;
1718
1719 lmc_trace(dev, "lmc_get_stats in");
1720
1721 spin_lock_irqsave(&sc->lmc_lock, flags);
1722
1723 sc->lmc_device->stats.rx_missed_errors += LMC_CSR_READ(sc, csr_missed_frames) & 0xffff;
1724
1725 spin_unlock_irqrestore(&sc->lmc_lock, flags);
1726
1727 lmc_trace(dev, "lmc_get_stats out");
1728
1729 return &sc->lmc_device->stats;
1730 }
1731
1732 static struct pci_driver lmc_driver = {
1733 .name = "lmc",
1734 .id_table = lmc_pci_tbl,
1735 .probe = lmc_init_one,
1736 .remove = __devexit_p(lmc_remove_one),
1737 };
1738
init_lmc(void)1739 static int __init init_lmc(void)
1740 {
1741 return pci_register_driver(&lmc_driver);
1742 }
1743
exit_lmc(void)1744 static void __exit exit_lmc(void)
1745 {
1746 pci_unregister_driver(&lmc_driver);
1747 }
1748
1749 module_init(init_lmc);
1750 module_exit(exit_lmc);
1751
lmc_mii_readreg(lmc_softc_t * const sc,unsigned devaddr,unsigned regno)1752 unsigned lmc_mii_readreg (lmc_softc_t * const sc, unsigned devaddr, unsigned regno) /*fold00*/
1753 {
1754 int i;
1755 int command = (0xf6 << 10) | (devaddr << 5) | regno;
1756 int retval = 0;
1757
1758 lmc_trace(sc->lmc_device, "lmc_mii_readreg in");
1759
1760 LMC_MII_SYNC (sc);
1761
1762 lmc_trace(sc->lmc_device, "lmc_mii_readreg: done sync");
1763
1764 for (i = 15; i >= 0; i--)
1765 {
1766 int dataval = (command & (1 << i)) ? 0x20000 : 0;
1767
1768 LMC_CSR_WRITE (sc, csr_9, dataval);
1769 lmc_delay ();
1770 /* __SLOW_DOWN_IO; */
1771 LMC_CSR_WRITE (sc, csr_9, dataval | 0x10000);
1772 lmc_delay ();
1773 /* __SLOW_DOWN_IO; */
1774 }
1775
1776 lmc_trace(sc->lmc_device, "lmc_mii_readreg: done1");
1777
1778 for (i = 19; i > 0; i--)
1779 {
1780 LMC_CSR_WRITE (sc, csr_9, 0x40000);
1781 lmc_delay ();
1782 /* __SLOW_DOWN_IO; */
1783 retval = (retval << 1) | ((LMC_CSR_READ (sc, csr_9) & 0x80000) ? 1 : 0);
1784 LMC_CSR_WRITE (sc, csr_9, 0x40000 | 0x10000);
1785 lmc_delay ();
1786 /* __SLOW_DOWN_IO; */
1787 }
1788
1789 lmc_trace(sc->lmc_device, "lmc_mii_readreg out");
1790
1791 return (retval >> 1) & 0xffff;
1792 }
1793
lmc_mii_writereg(lmc_softc_t * const sc,unsigned devaddr,unsigned regno,unsigned data)1794 void lmc_mii_writereg (lmc_softc_t * const sc, unsigned devaddr, unsigned regno, unsigned data) /*fold00*/
1795 {
1796 int i = 32;
1797 int command = (0x5002 << 16) | (devaddr << 23) | (regno << 18) | data;
1798
1799 lmc_trace(sc->lmc_device, "lmc_mii_writereg in");
1800
1801 LMC_MII_SYNC (sc);
1802
1803 i = 31;
1804 while (i >= 0)
1805 {
1806 int datav;
1807
1808 if (command & (1 << i))
1809 datav = 0x20000;
1810 else
1811 datav = 0x00000;
1812
1813 LMC_CSR_WRITE (sc, csr_9, datav);
1814 lmc_delay ();
1815 /* __SLOW_DOWN_IO; */
1816 LMC_CSR_WRITE (sc, csr_9, (datav | 0x10000));
1817 lmc_delay ();
1818 /* __SLOW_DOWN_IO; */
1819 i--;
1820 }
1821
1822 i = 2;
1823 while (i > 0)
1824 {
1825 LMC_CSR_WRITE (sc, csr_9, 0x40000);
1826 lmc_delay ();
1827 /* __SLOW_DOWN_IO; */
1828 LMC_CSR_WRITE (sc, csr_9, 0x50000);
1829 lmc_delay ();
1830 /* __SLOW_DOWN_IO; */
1831 i--;
1832 }
1833
1834 lmc_trace(sc->lmc_device, "lmc_mii_writereg out");
1835 }
1836
lmc_softreset(lmc_softc_t * const sc)1837 static void lmc_softreset (lmc_softc_t * const sc) /*fold00*/
1838 {
1839 int i;
1840
1841 lmc_trace(sc->lmc_device, "lmc_softreset in");
1842
1843 /* Initialize the receive rings and buffers. */
1844 sc->lmc_txfull = 0;
1845 sc->lmc_next_rx = 0;
1846 sc->lmc_next_tx = 0;
1847 sc->lmc_taint_rx = 0;
1848 sc->lmc_taint_tx = 0;
1849
1850 /*
1851 * Setup each one of the receiver buffers
1852 * allocate an skbuff for each one, setup the descriptor table
1853 * and point each buffer at the next one
1854 */
1855
1856 for (i = 0; i < LMC_RXDESCS; i++)
1857 {
1858 struct sk_buff *skb;
1859
1860 if (sc->lmc_rxq[i] == NULL)
1861 {
1862 skb = dev_alloc_skb (LMC_PKT_BUF_SZ + 2);
1863 if(skb == NULL){
1864 printk(KERN_WARNING "%s: Failed to allocate receiver ring, will try again\n", sc->name);
1865 sc->failed_ring = 1;
1866 break;
1867 }
1868 else{
1869 sc->lmc_rxq[i] = skb;
1870 }
1871 }
1872 else
1873 {
1874 skb = sc->lmc_rxq[i];
1875 }
1876
1877 skb->dev = sc->lmc_device;
1878
1879 /* owned by 21140 */
1880 sc->lmc_rxring[i].status = 0x80000000;
1881
1882 /* used to be PKT_BUF_SZ now uses skb since we lose some to head room */
1883 sc->lmc_rxring[i].length = skb_tailroom(skb);
1884
1885 /* use to be tail which is dumb since you're thinking why write
1886 * to the end of the packj,et but since there's nothing there tail == data
1887 */
1888 sc->lmc_rxring[i].buffer1 = virt_to_bus (skb->data);
1889
1890 /* This is fair since the structure is static and we have the next address */
1891 sc->lmc_rxring[i].buffer2 = virt_to_bus (&sc->lmc_rxring[i + 1]);
1892
1893 }
1894
1895 /*
1896 * Sets end of ring
1897 */
1898 if (i != 0) {
1899 sc->lmc_rxring[i - 1].length |= 0x02000000; /* Set end of buffers flag */
1900 sc->lmc_rxring[i - 1].buffer2 = virt_to_bus(&sc->lmc_rxring[0]); /* Point back to the start */
1901 }
1902 LMC_CSR_WRITE (sc, csr_rxlist, virt_to_bus (sc->lmc_rxring)); /* write base address */
1903
1904 /* Initialize the transmit rings and buffers */
1905 for (i = 0; i < LMC_TXDESCS; i++)
1906 {
1907 if (sc->lmc_txq[i] != NULL){ /* have buffer */
1908 dev_kfree_skb(sc->lmc_txq[i]); /* free it */
1909 sc->lmc_device->stats.tx_dropped++; /* We just dropped a packet */
1910 }
1911 sc->lmc_txq[i] = NULL;
1912 sc->lmc_txring[i].status = 0x00000000;
1913 sc->lmc_txring[i].buffer2 = virt_to_bus (&sc->lmc_txring[i + 1]);
1914 }
1915 sc->lmc_txring[i - 1].buffer2 = virt_to_bus (&sc->lmc_txring[0]);
1916 LMC_CSR_WRITE (sc, csr_txlist, virt_to_bus (sc->lmc_txring));
1917
1918 lmc_trace(sc->lmc_device, "lmc_softreset out");
1919 }
1920
lmc_gpio_mkinput(lmc_softc_t * const sc,u32 bits)1921 void lmc_gpio_mkinput(lmc_softc_t * const sc, u32 bits) /*fold00*/
1922 {
1923 lmc_trace(sc->lmc_device, "lmc_gpio_mkinput in");
1924 sc->lmc_gpio_io &= ~bits;
1925 LMC_CSR_WRITE(sc, csr_gp, TULIP_GP_PINSET | (sc->lmc_gpio_io));
1926 lmc_trace(sc->lmc_device, "lmc_gpio_mkinput out");
1927 }
1928
lmc_gpio_mkoutput(lmc_softc_t * const sc,u32 bits)1929 void lmc_gpio_mkoutput(lmc_softc_t * const sc, u32 bits) /*fold00*/
1930 {
1931 lmc_trace(sc->lmc_device, "lmc_gpio_mkoutput in");
1932 sc->lmc_gpio_io |= bits;
1933 LMC_CSR_WRITE(sc, csr_gp, TULIP_GP_PINSET | (sc->lmc_gpio_io));
1934 lmc_trace(sc->lmc_device, "lmc_gpio_mkoutput out");
1935 }
1936
lmc_led_on(lmc_softc_t * const sc,u32 led)1937 void lmc_led_on(lmc_softc_t * const sc, u32 led) /*fold00*/
1938 {
1939 lmc_trace(sc->lmc_device, "lmc_led_on in");
1940 if((~sc->lmc_miireg16) & led){ /* Already on! */
1941 lmc_trace(sc->lmc_device, "lmc_led_on aon out");
1942 return;
1943 }
1944
1945 sc->lmc_miireg16 &= ~led;
1946 lmc_mii_writereg(sc, 0, 16, sc->lmc_miireg16);
1947 lmc_trace(sc->lmc_device, "lmc_led_on out");
1948 }
1949
lmc_led_off(lmc_softc_t * const sc,u32 led)1950 void lmc_led_off(lmc_softc_t * const sc, u32 led) /*fold00*/
1951 {
1952 lmc_trace(sc->lmc_device, "lmc_led_off in");
1953 if(sc->lmc_miireg16 & led){ /* Already set don't do anything */
1954 lmc_trace(sc->lmc_device, "lmc_led_off aoff out");
1955 return;
1956 }
1957
1958 sc->lmc_miireg16 |= led;
1959 lmc_mii_writereg(sc, 0, 16, sc->lmc_miireg16);
1960 lmc_trace(sc->lmc_device, "lmc_led_off out");
1961 }
1962
lmc_reset(lmc_softc_t * const sc)1963 static void lmc_reset(lmc_softc_t * const sc) /*fold00*/
1964 {
1965 lmc_trace(sc->lmc_device, "lmc_reset in");
1966 sc->lmc_miireg16 |= LMC_MII16_FIFO_RESET;
1967 lmc_mii_writereg(sc, 0, 16, sc->lmc_miireg16);
1968
1969 sc->lmc_miireg16 &= ~LMC_MII16_FIFO_RESET;
1970 lmc_mii_writereg(sc, 0, 16, sc->lmc_miireg16);
1971
1972 /*
1973 * make some of the GPIO pins be outputs
1974 */
1975 lmc_gpio_mkoutput(sc, LMC_GEP_RESET);
1976
1977 /*
1978 * RESET low to force state reset. This also forces
1979 * the transmitter clock to be internal, but we expect to reset
1980 * that later anyway.
1981 */
1982 sc->lmc_gpio &= ~(LMC_GEP_RESET);
1983 LMC_CSR_WRITE(sc, csr_gp, sc->lmc_gpio);
1984
1985 /*
1986 * hold for more than 10 microseconds
1987 */
1988 udelay(50);
1989
1990 /*
1991 * stop driving Xilinx-related signals
1992 */
1993 lmc_gpio_mkinput(sc, LMC_GEP_RESET);
1994
1995 /*
1996 * Call media specific init routine
1997 */
1998 sc->lmc_media->init(sc);
1999
2000 sc->extra_stats.resetCount++;
2001 lmc_trace(sc->lmc_device, "lmc_reset out");
2002 }
2003
lmc_dec_reset(lmc_softc_t * const sc)2004 static void lmc_dec_reset(lmc_softc_t * const sc) /*fold00*/
2005 {
2006 u32 val;
2007 lmc_trace(sc->lmc_device, "lmc_dec_reset in");
2008
2009 /*
2010 * disable all interrupts
2011 */
2012 sc->lmc_intrmask = 0;
2013 LMC_CSR_WRITE(sc, csr_intr, sc->lmc_intrmask);
2014
2015 /*
2016 * Reset the chip with a software reset command.
2017 * Wait 10 microseconds (actually 50 PCI cycles but at
2018 * 33MHz that comes to two microseconds but wait a
2019 * bit longer anyways)
2020 */
2021 LMC_CSR_WRITE(sc, csr_busmode, TULIP_BUSMODE_SWRESET);
2022 udelay(25);
2023 #ifdef __sparc__
2024 sc->lmc_busmode = LMC_CSR_READ(sc, csr_busmode);
2025 sc->lmc_busmode = 0x00100000;
2026 sc->lmc_busmode &= ~TULIP_BUSMODE_SWRESET;
2027 LMC_CSR_WRITE(sc, csr_busmode, sc->lmc_busmode);
2028 #endif
2029 sc->lmc_cmdmode = LMC_CSR_READ(sc, csr_command);
2030
2031 /*
2032 * We want:
2033 * no ethernet address in frames we write
2034 * disable padding (txdesc, padding disable)
2035 * ignore runt frames (rdes0 bit 15)
2036 * no receiver watchdog or transmitter jabber timer
2037 * (csr15 bit 0,14 == 1)
2038 * if using 16-bit CRC, turn off CRC (trans desc, crc disable)
2039 */
2040
2041 sc->lmc_cmdmode |= ( TULIP_CMD_PROMISCUOUS
2042 | TULIP_CMD_FULLDUPLEX
2043 | TULIP_CMD_PASSBADPKT
2044 | TULIP_CMD_NOHEARTBEAT
2045 | TULIP_CMD_PORTSELECT
2046 | TULIP_CMD_RECEIVEALL
2047 | TULIP_CMD_MUSTBEONE
2048 );
2049 sc->lmc_cmdmode &= ~( TULIP_CMD_OPERMODE
2050 | TULIP_CMD_THRESHOLDCTL
2051 | TULIP_CMD_STOREFWD
2052 | TULIP_CMD_TXTHRSHLDCTL
2053 );
2054
2055 LMC_CSR_WRITE(sc, csr_command, sc->lmc_cmdmode);
2056
2057 /*
2058 * disable receiver watchdog and transmit jabber
2059 */
2060 val = LMC_CSR_READ(sc, csr_sia_general);
2061 val |= (TULIP_WATCHDOG_TXDISABLE | TULIP_WATCHDOG_RXDISABLE);
2062 LMC_CSR_WRITE(sc, csr_sia_general, val);
2063
2064 lmc_trace(sc->lmc_device, "lmc_dec_reset out");
2065 }
2066
lmc_initcsrs(lmc_softc_t * const sc,lmc_csrptr_t csr_base,size_t csr_size)2067 static void lmc_initcsrs(lmc_softc_t * const sc, lmc_csrptr_t csr_base, /*fold00*/
2068 size_t csr_size)
2069 {
2070 lmc_trace(sc->lmc_device, "lmc_initcsrs in");
2071 sc->lmc_csrs.csr_busmode = csr_base + 0 * csr_size;
2072 sc->lmc_csrs.csr_txpoll = csr_base + 1 * csr_size;
2073 sc->lmc_csrs.csr_rxpoll = csr_base + 2 * csr_size;
2074 sc->lmc_csrs.csr_rxlist = csr_base + 3 * csr_size;
2075 sc->lmc_csrs.csr_txlist = csr_base + 4 * csr_size;
2076 sc->lmc_csrs.csr_status = csr_base + 5 * csr_size;
2077 sc->lmc_csrs.csr_command = csr_base + 6 * csr_size;
2078 sc->lmc_csrs.csr_intr = csr_base + 7 * csr_size;
2079 sc->lmc_csrs.csr_missed_frames = csr_base + 8 * csr_size;
2080 sc->lmc_csrs.csr_9 = csr_base + 9 * csr_size;
2081 sc->lmc_csrs.csr_10 = csr_base + 10 * csr_size;
2082 sc->lmc_csrs.csr_11 = csr_base + 11 * csr_size;
2083 sc->lmc_csrs.csr_12 = csr_base + 12 * csr_size;
2084 sc->lmc_csrs.csr_13 = csr_base + 13 * csr_size;
2085 sc->lmc_csrs.csr_14 = csr_base + 14 * csr_size;
2086 sc->lmc_csrs.csr_15 = csr_base + 15 * csr_size;
2087 lmc_trace(sc->lmc_device, "lmc_initcsrs out");
2088 }
2089
lmc_driver_timeout(struct net_device * dev)2090 static void lmc_driver_timeout(struct net_device *dev)
2091 {
2092 lmc_softc_t *sc = dev_to_sc(dev);
2093 u32 csr6;
2094 unsigned long flags;
2095
2096 lmc_trace(dev, "lmc_driver_timeout in");
2097
2098 spin_lock_irqsave(&sc->lmc_lock, flags);
2099
2100 printk("%s: Xmitter busy|\n", dev->name);
2101
2102 sc->extra_stats.tx_tbusy_calls++;
2103 if (jiffies - dev_trans_start(dev) < TX_TIMEOUT)
2104 goto bug_out;
2105
2106 /*
2107 * Chip seems to have locked up
2108 * Reset it
2109 * This whips out all our decriptor
2110 * table and starts from scartch
2111 */
2112
2113 LMC_EVENT_LOG(LMC_EVENT_XMTPRCTMO,
2114 LMC_CSR_READ (sc, csr_status),
2115 sc->extra_stats.tx_ProcTimeout);
2116
2117 lmc_running_reset (dev);
2118
2119 LMC_EVENT_LOG(LMC_EVENT_RESET1, LMC_CSR_READ (sc, csr_status), 0);
2120 LMC_EVENT_LOG(LMC_EVENT_RESET2,
2121 lmc_mii_readreg (sc, 0, 16),
2122 lmc_mii_readreg (sc, 0, 17));
2123
2124 /* restart the tx processes */
2125 csr6 = LMC_CSR_READ (sc, csr_command);
2126 LMC_CSR_WRITE (sc, csr_command, csr6 | 0x0002);
2127 LMC_CSR_WRITE (sc, csr_command, csr6 | 0x2002);
2128
2129 /* immediate transmit */
2130 LMC_CSR_WRITE (sc, csr_txpoll, 0);
2131
2132 sc->lmc_device->stats.tx_errors++;
2133 sc->extra_stats.tx_ProcTimeout++; /* -baz */
2134
2135 dev->trans_start = jiffies; /* prevent tx timeout */
2136
2137 bug_out:
2138
2139 spin_unlock_irqrestore(&sc->lmc_lock, flags);
2140
2141 lmc_trace(dev, "lmc_driver_timout out");
2142
2143
2144 }
2145