1 /* 2 * arch/powerpc/sysdev/qe_lib/qe_ic.h 3 * 4 * QUICC ENGINE Interrupt Controller Header 5 * 6 * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved. 7 * 8 * Author: Li Yang <leoli@freescale.com> 9 * Based on code from Shlomi Gridish <gridish@freescale.com> 10 * 11 * This program is free software; you can redistribute it and/or modify it 12 * under the terms of the GNU General Public License as published by the 13 * Free Software Foundation; either version 2 of the License, or (at your 14 * option) any later version. 15 */ 16 #ifndef _POWERPC_SYSDEV_QE_IC_H 17 #define _POWERPC_SYSDEV_QE_IC_H 18 19 #include <asm/qe_ic.h> 20 21 #define NR_QE_IC_INTS 64 22 23 /* QE IC registers offset */ 24 #define QEIC_CICR 0x00 25 #define QEIC_CIVEC 0x04 26 #define QEIC_CRIPNR 0x08 27 #define QEIC_CIPNR 0x0c 28 #define QEIC_CIPXCC 0x10 29 #define QEIC_CIPYCC 0x14 30 #define QEIC_CIPWCC 0x18 31 #define QEIC_CIPZCC 0x1c 32 #define QEIC_CIMR 0x20 33 #define QEIC_CRIMR 0x24 34 #define QEIC_CICNR 0x28 35 #define QEIC_CIPRTA 0x30 36 #define QEIC_CIPRTB 0x34 37 #define QEIC_CRICR 0x3c 38 #define QEIC_CHIVEC 0x60 39 40 /* Interrupt priority registers */ 41 #define CIPCC_SHIFT_PRI0 29 42 #define CIPCC_SHIFT_PRI1 26 43 #define CIPCC_SHIFT_PRI2 23 44 #define CIPCC_SHIFT_PRI3 20 45 #define CIPCC_SHIFT_PRI4 13 46 #define CIPCC_SHIFT_PRI5 10 47 #define CIPCC_SHIFT_PRI6 7 48 #define CIPCC_SHIFT_PRI7 4 49 50 /* CICR priority modes */ 51 #define CICR_GWCC 0x00040000 52 #define CICR_GXCC 0x00020000 53 #define CICR_GYCC 0x00010000 54 #define CICR_GZCC 0x00080000 55 #define CICR_GRTA 0x00200000 56 #define CICR_GRTB 0x00400000 57 #define CICR_HPIT_SHIFT 8 58 #define CICR_HPIT_MASK 0x00000300 59 #define CICR_HP_SHIFT 24 60 #define CICR_HP_MASK 0x3f000000 61 62 /* CICNR */ 63 #define CICNR_WCC1T_SHIFT 20 64 #define CICNR_ZCC1T_SHIFT 28 65 #define CICNR_YCC1T_SHIFT 12 66 #define CICNR_XCC1T_SHIFT 4 67 68 /* CRICR */ 69 #define CRICR_RTA1T_SHIFT 20 70 #define CRICR_RTB1T_SHIFT 28 71 72 /* Signal indicator */ 73 #define SIGNAL_MASK 3 74 #define SIGNAL_HIGH 2 75 #define SIGNAL_LOW 0 76 77 struct qe_ic { 78 /* Control registers offset */ 79 volatile u32 __iomem *regs; 80 81 /* The remapper for this QEIC */ 82 struct irq_domain *irqhost; 83 84 /* The "linux" controller struct */ 85 struct irq_chip hc_irq; 86 87 /* VIRQ numbers of QE high/low irqs */ 88 unsigned int virq_high; 89 unsigned int virq_low; 90 }; 91 92 /* 93 * QE interrupt controller internal structure 94 */ 95 struct qe_ic_info { 96 u32 mask; /* location of this source at the QIMR register. */ 97 u32 mask_reg; /* Mask register offset */ 98 u8 pri_code; /* for grouped interrupts sources - the interrupt 99 code as appears at the group priority register */ 100 u32 pri_reg; /* Group priority register offset */ 101 }; 102 103 #endif /* _POWERPC_SYSDEV_QE_IC_H */ 104