1config SIBYTE_SB1250
2	bool
3	select CEVT_SB1250
4	select CSRC_SB1250
5	select HW_HAS_PCI
6	select IRQ_CPU
7	select SIBYTE_ENABLE_LDT_IF_PCI
8	select SIBYTE_HAS_ZBUS_PROFILING
9	select SIBYTE_SB1xxx_SOC
10	select SYS_SUPPORTS_SMP
11
12config SIBYTE_BCM1120
13	bool
14	select CEVT_SB1250
15	select CSRC_SB1250
16	select IRQ_CPU
17	select SIBYTE_BCM112X
18	select SIBYTE_HAS_ZBUS_PROFILING
19	select SIBYTE_SB1xxx_SOC
20
21config SIBYTE_BCM1125
22	bool
23	select CEVT_SB1250
24	select CSRC_SB1250
25	select HW_HAS_PCI
26	select IRQ_CPU
27	select SIBYTE_BCM112X
28	select SIBYTE_HAS_ZBUS_PROFILING
29	select SIBYTE_SB1xxx_SOC
30
31config SIBYTE_BCM1125H
32	bool
33	select CEVT_SB1250
34	select CSRC_SB1250
35	select HW_HAS_PCI
36	select IRQ_CPU
37	select SIBYTE_BCM112X
38	select SIBYTE_ENABLE_LDT_IF_PCI
39	select SIBYTE_HAS_ZBUS_PROFILING
40	select SIBYTE_SB1xxx_SOC
41
42config SIBYTE_BCM112X
43	bool
44	select CEVT_SB1250
45	select CSRC_SB1250
46	select IRQ_CPU
47	select SIBYTE_SB1xxx_SOC
48	select SIBYTE_HAS_ZBUS_PROFILING
49
50config SIBYTE_BCM1x80
51	bool
52	select CEVT_BCM1480
53	select CSRC_BCM1480
54	select HW_HAS_PCI
55	select IRQ_CPU
56	select SIBYTE_HAS_ZBUS_PROFILING
57	select SIBYTE_SB1xxx_SOC
58	select SYS_SUPPORTS_SMP
59
60config SIBYTE_BCM1x55
61	bool
62	select CEVT_BCM1480
63	select CSRC_BCM1480
64	select HW_HAS_PCI
65	select IRQ_CPU
66	select SIBYTE_SB1xxx_SOC
67	select SIBYTE_HAS_ZBUS_PROFILING
68	select SYS_SUPPORTS_SMP
69
70config SIBYTE_SB1xxx_SOC
71	bool
72	select DMA_COHERENT
73	select IRQ_CPU
74	select SWAP_IO_SPACE
75	select SYS_SUPPORTS_32BIT_KERNEL
76	select SYS_SUPPORTS_64BIT_KERNEL
77	select CFE
78	select SYS_HAS_EARLY_PRINTK
79
80choice
81	prompt "SiByte SOC Stepping"
82	depends on SIBYTE_SB1xxx_SOC
83
84config CPU_SB1_PASS_1
85	bool "1250 Pass1"
86	depends on SIBYTE_SB1250
87	select CPU_HAS_PREFETCH
88
89config CPU_SB1_PASS_2_1250
90	bool "1250 An"
91	depends on SIBYTE_SB1250
92	select CPU_SB1_PASS_2
93	help
94	  Also called BCM1250 Pass 2
95
96config CPU_SB1_PASS_2_2
97	bool "1250 Bn"
98	depends on SIBYTE_SB1250
99	select CPU_HAS_PREFETCH
100	help
101	  Also called BCM1250 Pass 2.2
102
103config CPU_SB1_PASS_4
104	bool "1250 Cn"
105	depends on SIBYTE_SB1250
106	select CPU_HAS_PREFETCH
107	help
108	  Also called BCM1250 Pass 3
109
110config CPU_SB1_PASS_2_112x
111	bool "112x Hybrid"
112	depends on SIBYTE_BCM112X
113	select CPU_SB1_PASS_2
114
115config CPU_SB1_PASS_3
116	bool "112x An"
117	depends on SIBYTE_BCM112X
118	select CPU_HAS_PREFETCH
119
120endchoice
121
122config CPU_SB1_PASS_2
123	bool
124
125config SIBYTE_HAS_LDT
126	bool
127
128config SIBYTE_ENABLE_LDT_IF_PCI
129	bool
130	select SIBYTE_HAS_LDT if PCI
131
132config SB1_CEX_ALWAYS_FATAL
133	bool "All cache exceptions considered fatal (no recovery attempted)"
134	depends on SIBYTE_SB1xxx_SOC
135
136config SB1_CERR_STALL
137	bool "Stall (rather than panic) on fatal cache error"
138	depends on SIBYTE_SB1xxx_SOC
139
140config SIBYTE_CFE_CONSOLE
141	bool "Use firmware console"
142	depends on SIBYTE_SB1xxx_SOC
143	help
144	  Use the CFE API's console write routines during boot.  Other console
145	  options (VT console, sb1250 duart console, etc.) should not be
146	  configured.
147
148config SIBYTE_BUS_WATCHER
149	bool "Support for Bus Watcher statistics"
150	depends on SIBYTE_SB1xxx_SOC
151	help
152	  Handle and keep statistics on the bus error interrupts (COR_ECC,
153	  BAD_ECC, IO_BUS).
154
155config SIBYTE_BW_TRACE
156	bool "Capture bus trace before bus error"
157	depends on SIBYTE_BUS_WATCHER
158	help
159	  Run a continuous bus trace, dumping the raw data as soon as
160	  a ZBbus error is detected.  Cannot work if ZBbus profiling
161	  is turned on, and also will interfere with JTAG-based trace
162	  buffer activity.  Raw buffer data is dumped to console, and
163	  must be processed off-line.
164
165config SIBYTE_TBPROF
166	tristate "Support for ZBbus profiling"
167	depends on SIBYTE_HAS_ZBUS_PROFILING
168
169config SIBYTE_HAS_ZBUS_PROFILING
170	bool
171