1 /***********************license start***************
2  * Author: Cavium Networks
3  *
4  * Contact: support@caviumnetworks.com
5  * This file is part of the OCTEON SDK
6  *
7  * Copyright (c) 2003-2008 Cavium Networks
8  *
9  * This file is free software; you can redistribute it and/or modify
10  * it under the terms of the GNU General Public License, Version 2, as
11  * published by the Free Software Foundation.
12  *
13  * This file is distributed in the hope that it will be useful, but
14  * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
15  * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
16  * NONINFRINGEMENT.  See the GNU General Public License for more
17  * details.
18  *
19  * You should have received a copy of the GNU General Public License
20  * along with this file; if not, write to the Free Software
21  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
22  * or visit http://www.gnu.org/licenses/.
23  *
24  * This file may also be available under a different license from Cavium.
25  * Contact Cavium Networks for more information
26  ***********************license end**************************************/
27 
28 void __cvmx_interrupt_gmxx_enable(int interface);
29 void __cvmx_interrupt_spxx_int_msk_enable(int index);
30 void __cvmx_interrupt_stxx_int_msk_enable(int index);
31 
32 /*
33  * Functions for SPI initialization, configuration,
34  * and monitoring.
35  */
36 #include <asm/octeon/octeon.h>
37 
38 #include <asm/octeon/cvmx-config.h>
39 #include <asm/octeon/cvmx-spi.h>
40 #include <asm/octeon/cvmx-helper.h>
41 
42 #include <asm/octeon/cvmx-pip-defs.h>
43 #include <asm/octeon/cvmx-pko-defs.h>
44 
45 /*
46  * CVMX_HELPER_SPI_TIMEOUT is used to determine how long the SPI
47  * initialization routines wait for SPI training. You can override the
48  * value using executive-config.h if necessary.
49  */
50 #ifndef CVMX_HELPER_SPI_TIMEOUT
51 #define CVMX_HELPER_SPI_TIMEOUT 10
52 #endif
53 
__cvmx_helper_spi_enumerate(int interface)54 int __cvmx_helper_spi_enumerate(int interface)
55 {
56 	if ((cvmx_sysinfo_get()->board_type != CVMX_BOARD_TYPE_SIM) &&
57 	    cvmx_spi4000_is_present(interface)) {
58 		return 10;
59 	} else {
60 		return 16;
61 	}
62 }
63 
64 /**
65  * Probe a SPI interface and determine the number of ports
66  * connected to it. The SPI interface should still be down after
67  * this call.
68  *
69  * @interface: Interface to probe
70  *
71  * Returns Number of ports on the interface. Zero to disable.
72  */
__cvmx_helper_spi_probe(int interface)73 int __cvmx_helper_spi_probe(int interface)
74 {
75 	int num_ports = 0;
76 
77 	if ((cvmx_sysinfo_get()->board_type != CVMX_BOARD_TYPE_SIM) &&
78 	    cvmx_spi4000_is_present(interface)) {
79 		num_ports = 10;
80 	} else {
81 		union cvmx_pko_reg_crc_enable enable;
82 		num_ports = 16;
83 		/*
84 		 * Unlike the SPI4000, most SPI devices don't
85 		 * automatically put on the L2 CRC. For everything
86 		 * except for the SPI4000 have PKO append the L2 CRC
87 		 * to the packet.
88 		 */
89 		enable.u64 = cvmx_read_csr(CVMX_PKO_REG_CRC_ENABLE);
90 		enable.s.enable |= 0xffff << (interface * 16);
91 		cvmx_write_csr(CVMX_PKO_REG_CRC_ENABLE, enable.u64);
92 	}
93 	__cvmx_helper_setup_gmx(interface, num_ports);
94 	return num_ports;
95 }
96 
97 /**
98  * Bringup and enable a SPI interface. After this call packet I/O
99  * should be fully functional. This is called with IPD enabled but
100  * PKO disabled.
101  *
102  * @interface: Interface to bring up
103  *
104  * Returns Zero on success, negative on failure
105  */
__cvmx_helper_spi_enable(int interface)106 int __cvmx_helper_spi_enable(int interface)
107 {
108 	/*
109 	 * Normally the ethernet L2 CRC is checked and stripped in the
110 	 * GMX block.  When you are using SPI, this isn' the case and
111 	 * IPD needs to check the L2 CRC.
112 	 */
113 	int num_ports = cvmx_helper_ports_on_interface(interface);
114 	int ipd_port;
115 	for (ipd_port = interface * 16; ipd_port < interface * 16 + num_ports;
116 	     ipd_port++) {
117 		union cvmx_pip_prt_cfgx port_config;
118 		port_config.u64 = cvmx_read_csr(CVMX_PIP_PRT_CFGX(ipd_port));
119 		port_config.s.crc_en = 1;
120 		cvmx_write_csr(CVMX_PIP_PRT_CFGX(ipd_port), port_config.u64);
121 	}
122 
123 	if (cvmx_sysinfo_get()->board_type != CVMX_BOARD_TYPE_SIM) {
124 		cvmx_spi_start_interface(interface, CVMX_SPI_MODE_DUPLEX,
125 					 CVMX_HELPER_SPI_TIMEOUT, num_ports);
126 		if (cvmx_spi4000_is_present(interface))
127 			cvmx_spi4000_initialize(interface);
128 	}
129 	__cvmx_interrupt_spxx_int_msk_enable(interface);
130 	__cvmx_interrupt_stxx_int_msk_enable(interface);
131 	__cvmx_interrupt_gmxx_enable(interface);
132 	return 0;
133 }
134 
135 /**
136  * Return the link state of an IPD/PKO port as returned by
137  * auto negotiation. The result of this function may not match
138  * Octeon's link config if auto negotiation has changed since
139  * the last call to cvmx_helper_link_set().
140  *
141  * @ipd_port: IPD/PKO port to query
142  *
143  * Returns Link state
144  */
__cvmx_helper_spi_link_get(int ipd_port)145 cvmx_helper_link_info_t __cvmx_helper_spi_link_get(int ipd_port)
146 {
147 	cvmx_helper_link_info_t result;
148 	int interface = cvmx_helper_get_interface_num(ipd_port);
149 	int index = cvmx_helper_get_interface_index_num(ipd_port);
150 	result.u64 = 0;
151 
152 	if (cvmx_sysinfo_get()->board_type == CVMX_BOARD_TYPE_SIM) {
153 		/* The simulator gives you a simulated full duplex link */
154 		result.s.link_up = 1;
155 		result.s.full_duplex = 1;
156 		result.s.speed = 10000;
157 	} else if (cvmx_spi4000_is_present(interface)) {
158 		union cvmx_gmxx_rxx_rx_inbnd inband =
159 		    cvmx_spi4000_check_speed(interface, index);
160 		result.s.link_up = inband.s.status;
161 		result.s.full_duplex = inband.s.duplex;
162 		switch (inband.s.speed) {
163 		case 0:	/* 10 Mbps */
164 			result.s.speed = 10;
165 			break;
166 		case 1:	/* 100 Mbps */
167 			result.s.speed = 100;
168 			break;
169 		case 2:	/* 1 Gbps */
170 			result.s.speed = 1000;
171 			break;
172 		case 3:	/* Illegal */
173 			result.s.speed = 0;
174 			result.s.link_up = 0;
175 			break;
176 		}
177 	} else {
178 		/* For generic SPI we can't determine the link, just return some
179 		   sane results */
180 		result.s.link_up = 1;
181 		result.s.full_duplex = 1;
182 		result.s.speed = 10000;
183 	}
184 	return result;
185 }
186 
187 /**
188  * Configure an IPD/PKO port for the specified link state. This
189  * function does not influence auto negotiation at the PHY level.
190  * The passed link state must always match the link state returned
191  * by cvmx_helper_link_get(). It is normally best to use
192  * cvmx_helper_link_autoconf() instead.
193  *
194  * @ipd_port:  IPD/PKO port to configure
195  * @link_info: The new link state
196  *
197  * Returns Zero on success, negative on failure
198  */
__cvmx_helper_spi_link_set(int ipd_port,cvmx_helper_link_info_t link_info)199 int __cvmx_helper_spi_link_set(int ipd_port, cvmx_helper_link_info_t link_info)
200 {
201 	/* Nothing to do. If we have a SPI4000 then the setup was already performed
202 	   by cvmx_spi4000_check_speed(). If not then there isn't any link
203 	   info */
204 	return 0;
205 }
206