1 /* linux/arch/arm/mach-s3c2410/mach-jive.c
2 *
3 * Copyright 2007 Simtec Electronics
4 * Ben Dooks <ben@simtec.co.uk>
5 *
6 * http://armlinux.simtec.co.uk/
7 *
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License version 2 as
10 * published by the Free Software Foundation.
11 */
12
13 #include <linux/kernel.h>
14 #include <linux/types.h>
15 #include <linux/interrupt.h>
16 #include <linux/list.h>
17 #include <linux/timer.h>
18 #include <linux/init.h>
19 #include <linux/gpio.h>
20 #include <linux/syscore_ops.h>
21 #include <linux/serial_core.h>
22 #include <linux/platform_device.h>
23 #include <linux/i2c.h>
24
25 #include <video/ili9320.h>
26
27 #include <linux/spi/spi.h>
28 #include <linux/spi/spi_gpio.h>
29
30 #include <asm/mach/arch.h>
31 #include <asm/mach/map.h>
32 #include <asm/mach/irq.h>
33
34 #include <plat/regs-serial.h>
35 #include <plat/nand.h>
36 #include <plat/iic.h>
37
38 #include <mach/regs-power.h>
39 #include <mach/regs-gpio.h>
40 #include <mach/regs-mem.h>
41 #include <mach/regs-lcd.h>
42 #include <mach/fb.h>
43
44 #include <asm/mach-types.h>
45
46 #include <linux/mtd/mtd.h>
47 #include <linux/mtd/nand.h>
48 #include <linux/mtd/nand_ecc.h>
49 #include <linux/mtd/partitions.h>
50
51 #include <plat/s3c2412.h>
52 #include <plat/gpio-cfg.h>
53 #include <plat/clock.h>
54 #include <plat/devs.h>
55 #include <plat/cpu.h>
56 #include <plat/pm.h>
57 #include <plat/udc.h>
58
59 static struct map_desc jive_iodesc[] __initdata = {
60 };
61
62 #define UCON S3C2410_UCON_DEFAULT
63 #define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE
64 #define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
65
66 static struct s3c2410_uartcfg jive_uartcfgs[] = {
67 [0] = {
68 .hwport = 0,
69 .flags = 0,
70 .ucon = UCON,
71 .ulcon = ULCON,
72 .ufcon = UFCON,
73 },
74 [1] = {
75 .hwport = 1,
76 .flags = 0,
77 .ucon = UCON,
78 .ulcon = ULCON,
79 .ufcon = UFCON,
80 },
81 [2] = {
82 .hwport = 2,
83 .flags = 0,
84 .ucon = UCON,
85 .ulcon = ULCON,
86 .ufcon = UFCON,
87 }
88 };
89
90 /* Jive flash assignment
91 *
92 * 0x00000000-0x00028000 : uboot
93 * 0x00028000-0x0002c000 : uboot env
94 * 0x0002c000-0x00030000 : spare
95 * 0x00030000-0x00200000 : zimage A
96 * 0x00200000-0x01600000 : cramfs A
97 * 0x01600000-0x017d0000 : zimage B
98 * 0x017d0000-0x02bd0000 : cramfs B
99 * 0x02bd0000-0x03fd0000 : yaffs
100 */
101 static struct mtd_partition __initdata jive_imageA_nand_part[] = {
102
103 #ifdef CONFIG_MACH_JIVE_SHOW_BOOTLOADER
104 /* Don't allow access to the bootloader from linux */
105 {
106 .name = "uboot",
107 .offset = 0,
108 .size = (160 * SZ_1K),
109 .mask_flags = MTD_WRITEABLE, /* force read-only */
110 },
111
112 /* spare */
113 {
114 .name = "spare",
115 .offset = (176 * SZ_1K),
116 .size = (16 * SZ_1K),
117 },
118 #endif
119
120 /* booted images */
121 {
122 .name = "kernel (ro)",
123 .offset = (192 * SZ_1K),
124 .size = (SZ_2M) - (192 * SZ_1K),
125 .mask_flags = MTD_WRITEABLE, /* force read-only */
126 }, {
127 .name = "root (ro)",
128 .offset = (SZ_2M),
129 .size = (20 * SZ_1M),
130 .mask_flags = MTD_WRITEABLE, /* force read-only */
131 },
132
133 /* yaffs */
134 {
135 .name = "yaffs",
136 .offset = (44 * SZ_1M),
137 .size = (20 * SZ_1M),
138 },
139
140 /* bootloader environment */
141 {
142 .name = "env",
143 .offset = (160 * SZ_1K),
144 .size = (16 * SZ_1K),
145 },
146
147 /* upgrade images */
148 {
149 .name = "zimage",
150 .offset = (22 * SZ_1M),
151 .size = (2 * SZ_1M) - (192 * SZ_1K),
152 }, {
153 .name = "cramfs",
154 .offset = (24 * SZ_1M) - (192*SZ_1K),
155 .size = (20 * SZ_1M),
156 },
157 };
158
159 static struct mtd_partition __initdata jive_imageB_nand_part[] = {
160
161 #ifdef CONFIG_MACH_JIVE_SHOW_BOOTLOADER
162 /* Don't allow access to the bootloader from linux */
163 {
164 .name = "uboot",
165 .offset = 0,
166 .size = (160 * SZ_1K),
167 .mask_flags = MTD_WRITEABLE, /* force read-only */
168 },
169
170 /* spare */
171 {
172 .name = "spare",
173 .offset = (176 * SZ_1K),
174 .size = (16 * SZ_1K),
175 },
176 #endif
177
178 /* booted images */
179 {
180 .name = "kernel (ro)",
181 .offset = (22 * SZ_1M),
182 .size = (2 * SZ_1M) - (192 * SZ_1K),
183 .mask_flags = MTD_WRITEABLE, /* force read-only */
184 },
185 {
186 .name = "root (ro)",
187 .offset = (24 * SZ_1M) - (192 * SZ_1K),
188 .size = (20 * SZ_1M),
189 .mask_flags = MTD_WRITEABLE, /* force read-only */
190 },
191
192 /* yaffs */
193 {
194 .name = "yaffs",
195 .offset = (44 * SZ_1M),
196 .size = (20 * SZ_1M),
197 },
198
199 /* bootloader environment */
200 {
201 .name = "env",
202 .offset = (160 * SZ_1K),
203 .size = (16 * SZ_1K),
204 },
205
206 /* upgrade images */
207 {
208 .name = "zimage",
209 .offset = (192 * SZ_1K),
210 .size = (2 * SZ_1M) - (192 * SZ_1K),
211 }, {
212 .name = "cramfs",
213 .offset = (2 * SZ_1M),
214 .size = (20 * SZ_1M),
215 },
216 };
217
218 static struct s3c2410_nand_set __initdata jive_nand_sets[] = {
219 [0] = {
220 .name = "flash",
221 .nr_chips = 1,
222 .nr_partitions = ARRAY_SIZE(jive_imageA_nand_part),
223 .partitions = jive_imageA_nand_part,
224 },
225 };
226
227 static struct s3c2410_platform_nand __initdata jive_nand_info = {
228 /* set taken from osiris nand timings, possibly still conservative */
229 .tacls = 30,
230 .twrph0 = 55,
231 .twrph1 = 40,
232 .sets = jive_nand_sets,
233 .nr_sets = ARRAY_SIZE(jive_nand_sets),
234 };
235
jive_mtdset(char * options)236 static int __init jive_mtdset(char *options)
237 {
238 struct s3c2410_nand_set *nand = &jive_nand_sets[0];
239 unsigned long set;
240
241 if (options == NULL || options[0] == '\0')
242 return 0;
243
244 if (strict_strtoul(options, 10, &set)) {
245 printk(KERN_ERR "failed to parse mtdset=%s\n", options);
246 return 0;
247 }
248
249 switch (set) {
250 case 1:
251 nand->nr_partitions = ARRAY_SIZE(jive_imageB_nand_part);
252 nand->partitions = jive_imageB_nand_part;
253 case 0:
254 /* this is already setup in the nand info */
255 break;
256 default:
257 printk(KERN_ERR "Unknown mtd set %ld specified,"
258 "using default.", set);
259 }
260
261 return 0;
262 }
263
264 /* parse the mtdset= option given to the kernel command line */
265 __setup("mtdset=", jive_mtdset);
266
267 /* LCD timing and setup */
268
269 #define LCD_XRES (240)
270 #define LCD_YRES (320)
271 #define LCD_LEFT_MARGIN (12)
272 #define LCD_RIGHT_MARGIN (12)
273 #define LCD_LOWER_MARGIN (12)
274 #define LCD_UPPER_MARGIN (12)
275 #define LCD_VSYNC (2)
276 #define LCD_HSYNC (2)
277
278 #define LCD_REFRESH (60)
279
280 #define LCD_HTOT (LCD_HSYNC + LCD_LEFT_MARGIN + LCD_XRES + LCD_RIGHT_MARGIN)
281 #define LCD_VTOT (LCD_VSYNC + LCD_LOWER_MARGIN + LCD_YRES + LCD_UPPER_MARGIN)
282
283 static struct s3c2410fb_display jive_vgg2432a4_display[] = {
284 [0] = {
285 .width = LCD_XRES,
286 .height = LCD_YRES,
287 .xres = LCD_XRES,
288 .yres = LCD_YRES,
289 .left_margin = LCD_LEFT_MARGIN,
290 .right_margin = LCD_RIGHT_MARGIN,
291 .upper_margin = LCD_UPPER_MARGIN,
292 .lower_margin = LCD_LOWER_MARGIN,
293 .hsync_len = LCD_HSYNC,
294 .vsync_len = LCD_VSYNC,
295
296 .pixclock = (1000000000000LL /
297 (LCD_REFRESH * LCD_HTOT * LCD_VTOT)),
298
299 .bpp = 16,
300 .type = (S3C2410_LCDCON1_TFT16BPP |
301 S3C2410_LCDCON1_TFT),
302
303 .lcdcon5 = (S3C2410_LCDCON5_FRM565 |
304 S3C2410_LCDCON5_INVVLINE |
305 S3C2410_LCDCON5_INVVFRAME |
306 S3C2410_LCDCON5_INVVDEN |
307 S3C2410_LCDCON5_PWREN),
308 },
309 };
310
311 /* todo - put into gpio header */
312
313 #define S3C2410_GPCCON_MASK(x) (3 << ((x) * 2))
314 #define S3C2410_GPDCON_MASK(x) (3 << ((x) * 2))
315
316 static struct s3c2410fb_mach_info jive_lcd_config = {
317 .displays = jive_vgg2432a4_display,
318 .num_displays = ARRAY_SIZE(jive_vgg2432a4_display),
319 .default_display = 0,
320
321 /* Enable VD[2..7], VD[10..15], VD[18..23] and VCLK, syncs, VDEN
322 * and disable the pull down resistors on pins we are using for LCD
323 * data. */
324
325 .gpcup = (0xf << 1) | (0x3f << 10),
326
327 .gpccon = (S3C2410_GPC1_VCLK | S3C2410_GPC2_VLINE |
328 S3C2410_GPC3_VFRAME | S3C2410_GPC4_VM |
329 S3C2410_GPC10_VD2 | S3C2410_GPC11_VD3 |
330 S3C2410_GPC12_VD4 | S3C2410_GPC13_VD5 |
331 S3C2410_GPC14_VD6 | S3C2410_GPC15_VD7),
332
333 .gpccon_mask = (S3C2410_GPCCON_MASK(1) | S3C2410_GPCCON_MASK(2) |
334 S3C2410_GPCCON_MASK(3) | S3C2410_GPCCON_MASK(4) |
335 S3C2410_GPCCON_MASK(10) | S3C2410_GPCCON_MASK(11) |
336 S3C2410_GPCCON_MASK(12) | S3C2410_GPCCON_MASK(13) |
337 S3C2410_GPCCON_MASK(14) | S3C2410_GPCCON_MASK(15)),
338
339 .gpdup = (0x3f << 2) | (0x3f << 10),
340
341 .gpdcon = (S3C2410_GPD2_VD10 | S3C2410_GPD3_VD11 |
342 S3C2410_GPD4_VD12 | S3C2410_GPD5_VD13 |
343 S3C2410_GPD6_VD14 | S3C2410_GPD7_VD15 |
344 S3C2410_GPD10_VD18 | S3C2410_GPD11_VD19 |
345 S3C2410_GPD12_VD20 | S3C2410_GPD13_VD21 |
346 S3C2410_GPD14_VD22 | S3C2410_GPD15_VD23),
347
348 .gpdcon_mask = (S3C2410_GPDCON_MASK(2) | S3C2410_GPDCON_MASK(3) |
349 S3C2410_GPDCON_MASK(4) | S3C2410_GPDCON_MASK(5) |
350 S3C2410_GPDCON_MASK(6) | S3C2410_GPDCON_MASK(7) |
351 S3C2410_GPDCON_MASK(10) | S3C2410_GPDCON_MASK(11)|
352 S3C2410_GPDCON_MASK(12) | S3C2410_GPDCON_MASK(13)|
353 S3C2410_GPDCON_MASK(14) | S3C2410_GPDCON_MASK(15)),
354 };
355
356 /* ILI9320 support. */
357
jive_lcm_reset(unsigned int set)358 static void jive_lcm_reset(unsigned int set)
359 {
360 printk(KERN_DEBUG "%s(%d)\n", __func__, set);
361
362 gpio_set_value(S3C2410_GPG(13), set);
363 }
364
365 #undef LCD_UPPER_MARGIN
366 #define LCD_UPPER_MARGIN 2
367
368 static struct ili9320_platdata jive_lcm_config = {
369 .hsize = LCD_XRES,
370 .vsize = LCD_YRES,
371
372 .reset = jive_lcm_reset,
373 .suspend = ILI9320_SUSPEND_DEEP,
374
375 .entry_mode = ILI9320_ENTRYMODE_ID(3) | ILI9320_ENTRYMODE_BGR,
376 .display2 = (ILI9320_DISPLAY2_FP(LCD_UPPER_MARGIN) |
377 ILI9320_DISPLAY2_BP(LCD_LOWER_MARGIN)),
378 .display3 = 0x0,
379 .display4 = 0x0,
380 .rgb_if1 = (ILI9320_RGBIF1_RIM_RGB18 |
381 ILI9320_RGBIF1_RM | ILI9320_RGBIF1_CLK_RGBIF),
382 .rgb_if2 = ILI9320_RGBIF2_DPL,
383 .interface2 = 0x0,
384 .interface3 = 0x3,
385 .interface4 = (ILI9320_INTERFACE4_RTNE(16) |
386 ILI9320_INTERFACE4_DIVE(1)),
387 .interface5 = 0x0,
388 .interface6 = 0x0,
389 };
390
391 /* LCD SPI support */
392
393 static struct spi_gpio_platform_data jive_lcd_spi = {
394 .sck = S3C2410_GPG(8),
395 .mosi = S3C2410_GPB(8),
396 .miso = SPI_GPIO_NO_MISO,
397 };
398
399 static struct platform_device jive_device_lcdspi = {
400 .name = "spi-gpio",
401 .id = 1,
402 .dev.platform_data = &jive_lcd_spi,
403 };
404
405
406 /* WM8750 audio code SPI definition */
407
408 static struct spi_gpio_platform_data jive_wm8750_spi = {
409 .sck = S3C2410_GPB(4),
410 .mosi = S3C2410_GPB(9),
411 .miso = SPI_GPIO_NO_MISO,
412 };
413
414 static struct platform_device jive_device_wm8750 = {
415 .name = "spi-gpio",
416 .id = 2,
417 .dev.platform_data = &jive_wm8750_spi,
418 };
419
420 /* JIVE SPI devices. */
421
422 static struct spi_board_info __initdata jive_spi_devs[] = {
423 [0] = {
424 .modalias = "VGG2432A4",
425 .bus_num = 1,
426 .chip_select = 0,
427 .mode = SPI_MODE_3, /* CPOL=1, CPHA=1 */
428 .max_speed_hz = 100000,
429 .platform_data = &jive_lcm_config,
430 .controller_data = (void *)S3C2410_GPB(7),
431 }, {
432 .modalias = "WM8750",
433 .bus_num = 2,
434 .chip_select = 0,
435 .mode = SPI_MODE_0, /* CPOL=0, CPHA=0 */
436 .max_speed_hz = 100000,
437 .controller_data = (void *)S3C2410_GPH(10),
438 },
439 };
440
441 /* I2C bus and device configuration. */
442
443 static struct s3c2410_platform_i2c jive_i2c_cfg __initdata = {
444 .frequency = 80 * 1000,
445 .flags = S3C_IICFLG_FILTER,
446 .sda_delay = 2,
447 };
448
449 static struct i2c_board_info jive_i2c_devs[] __initdata = {
450 [0] = {
451 I2C_BOARD_INFO("lis302dl", 0x1c),
452 .irq = IRQ_EINT14,
453 },
454 };
455
456 /* The platform devices being used. */
457
458 static struct platform_device *jive_devices[] __initdata = {
459 &s3c_device_ohci,
460 &s3c_device_rtc,
461 &s3c_device_wdt,
462 &s3c_device_i2c0,
463 &s3c_device_lcd,
464 &jive_device_lcdspi,
465 &jive_device_wm8750,
466 &s3c_device_nand,
467 &s3c_device_usbgadget,
468 };
469
470 static struct s3c2410_udc_mach_info jive_udc_cfg __initdata = {
471 .vbus_pin = S3C2410_GPG(1), /* detect is on GPG1 */
472 };
473
474 /* Jive power management device */
475
476 #ifdef CONFIG_PM
jive_pm_suspend(void)477 static int jive_pm_suspend(void)
478 {
479 /* Write the magic value u-boot uses to check for resume into
480 * the INFORM0 register, and ensure INFORM1 is set to the
481 * correct address to resume from. */
482
483 __raw_writel(0x2BED, S3C2412_INFORM0);
484 __raw_writel(virt_to_phys(s3c_cpu_resume), S3C2412_INFORM1);
485
486 return 0;
487 }
488
jive_pm_resume(void)489 static void jive_pm_resume(void)
490 {
491 __raw_writel(0x0, S3C2412_INFORM0);
492 }
493
494 #else
495 #define jive_pm_suspend NULL
496 #define jive_pm_resume NULL
497 #endif
498
499 static struct syscore_ops jive_pm_syscore_ops = {
500 .suspend = jive_pm_suspend,
501 .resume = jive_pm_resume,
502 };
503
jive_map_io(void)504 static void __init jive_map_io(void)
505 {
506 s3c24xx_init_io(jive_iodesc, ARRAY_SIZE(jive_iodesc));
507 s3c24xx_init_clocks(12000000);
508 s3c24xx_init_uarts(jive_uartcfgs, ARRAY_SIZE(jive_uartcfgs));
509 }
510
jive_power_off(void)511 static void jive_power_off(void)
512 {
513 printk(KERN_INFO "powering system down...\n");
514
515 s3c2410_gpio_setpin(S3C2410_GPC(5), 1);
516 s3c_gpio_cfgpin(S3C2410_GPC(5), S3C2410_GPIO_OUTPUT);
517 }
518
jive_machine_init(void)519 static void __init jive_machine_init(void)
520 {
521 /* register system core operations for managing low level suspend */
522
523 register_syscore_ops(&jive_pm_syscore_ops);
524
525 /* write our sleep configurations for the IO. Pull down all unused
526 * IO, ensure that we have turned off all peripherals we do not
527 * need, and configure the ones we do need. */
528
529 /* Port B sleep */
530
531 __raw_writel(S3C2412_SLPCON_IN(0) |
532 S3C2412_SLPCON_PULL(1) |
533 S3C2412_SLPCON_HIGH(2) |
534 S3C2412_SLPCON_PULL(3) |
535 S3C2412_SLPCON_PULL(4) |
536 S3C2412_SLPCON_PULL(5) |
537 S3C2412_SLPCON_PULL(6) |
538 S3C2412_SLPCON_HIGH(7) |
539 S3C2412_SLPCON_PULL(8) |
540 S3C2412_SLPCON_PULL(9) |
541 S3C2412_SLPCON_PULL(10), S3C2412_GPBSLPCON);
542
543 /* Port C sleep */
544
545 __raw_writel(S3C2412_SLPCON_PULL(0) |
546 S3C2412_SLPCON_PULL(1) |
547 S3C2412_SLPCON_PULL(2) |
548 S3C2412_SLPCON_PULL(3) |
549 S3C2412_SLPCON_PULL(4) |
550 S3C2412_SLPCON_PULL(5) |
551 S3C2412_SLPCON_LOW(6) |
552 S3C2412_SLPCON_PULL(6) |
553 S3C2412_SLPCON_PULL(7) |
554 S3C2412_SLPCON_PULL(8) |
555 S3C2412_SLPCON_PULL(9) |
556 S3C2412_SLPCON_PULL(10) |
557 S3C2412_SLPCON_PULL(11) |
558 S3C2412_SLPCON_PULL(12) |
559 S3C2412_SLPCON_PULL(13) |
560 S3C2412_SLPCON_PULL(14) |
561 S3C2412_SLPCON_PULL(15), S3C2412_GPCSLPCON);
562
563 /* Port D sleep */
564
565 __raw_writel(S3C2412_SLPCON_ALL_PULL, S3C2412_GPDSLPCON);
566
567 /* Port F sleep */
568
569 __raw_writel(S3C2412_SLPCON_LOW(0) |
570 S3C2412_SLPCON_LOW(1) |
571 S3C2412_SLPCON_LOW(2) |
572 S3C2412_SLPCON_EINT(3) |
573 S3C2412_SLPCON_EINT(4) |
574 S3C2412_SLPCON_EINT(5) |
575 S3C2412_SLPCON_EINT(6) |
576 S3C2412_SLPCON_EINT(7), S3C2412_GPFSLPCON);
577
578 /* Port G sleep */
579
580 __raw_writel(S3C2412_SLPCON_IN(0) |
581 S3C2412_SLPCON_IN(1) |
582 S3C2412_SLPCON_IN(2) |
583 S3C2412_SLPCON_IN(3) |
584 S3C2412_SLPCON_IN(4) |
585 S3C2412_SLPCON_IN(5) |
586 S3C2412_SLPCON_IN(6) |
587 S3C2412_SLPCON_IN(7) |
588 S3C2412_SLPCON_PULL(8) |
589 S3C2412_SLPCON_PULL(9) |
590 S3C2412_SLPCON_IN(10) |
591 S3C2412_SLPCON_PULL(11) |
592 S3C2412_SLPCON_PULL(12) |
593 S3C2412_SLPCON_PULL(13) |
594 S3C2412_SLPCON_IN(14) |
595 S3C2412_SLPCON_PULL(15), S3C2412_GPGSLPCON);
596
597 /* Port H sleep */
598
599 __raw_writel(S3C2412_SLPCON_PULL(0) |
600 S3C2412_SLPCON_PULL(1) |
601 S3C2412_SLPCON_PULL(2) |
602 S3C2412_SLPCON_PULL(3) |
603 S3C2412_SLPCON_PULL(4) |
604 S3C2412_SLPCON_PULL(5) |
605 S3C2412_SLPCON_PULL(6) |
606 S3C2412_SLPCON_IN(7) |
607 S3C2412_SLPCON_IN(8) |
608 S3C2412_SLPCON_PULL(9) |
609 S3C2412_SLPCON_IN(10), S3C2412_GPHSLPCON);
610
611 /* initialise the power management now we've setup everything. */
612
613 s3c_pm_init();
614
615 /** TODO - check that this is after the cmdline option! */
616 s3c_nand_set_platdata(&jive_nand_info);
617
618 /* initialise the spi */
619
620 gpio_request(S3C2410_GPG(13), "lcm reset");
621 gpio_direction_output(S3C2410_GPG(13), 0);
622
623 gpio_request(S3C2410_GPB(7), "jive spi");
624 gpio_direction_output(S3C2410_GPB(7), 1);
625
626 s3c2410_gpio_setpin(S3C2410_GPB(6), 0);
627 s3c_gpio_cfgpin(S3C2410_GPB(6), S3C2410_GPIO_OUTPUT);
628
629 s3c2410_gpio_setpin(S3C2410_GPG(8), 1);
630 s3c_gpio_cfgpin(S3C2410_GPG(8), S3C2410_GPIO_OUTPUT);
631
632 /* initialise the WM8750 spi */
633
634 gpio_request(S3C2410_GPH(10), "jive wm8750 spi");
635 gpio_direction_output(S3C2410_GPH(10), 1);
636
637 /* Turn off suspend on both USB ports, and switch the
638 * selectable USB port to USB device mode. */
639
640 s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
641 S3C2410_MISCCR_USBSUSPND0 |
642 S3C2410_MISCCR_USBSUSPND1, 0x0);
643
644 s3c24xx_udc_set_platdata(&jive_udc_cfg);
645 s3c24xx_fb_set_platdata(&jive_lcd_config);
646
647 spi_register_board_info(jive_spi_devs, ARRAY_SIZE(jive_spi_devs));
648
649 s3c_i2c0_set_platdata(&jive_i2c_cfg);
650 i2c_register_board_info(0, jive_i2c_devs, ARRAY_SIZE(jive_i2c_devs));
651
652 pm_power_off = jive_power_off;
653
654 platform_add_devices(jive_devices, ARRAY_SIZE(jive_devices));
655 }
656
657 MACHINE_START(JIVE, "JIVE")
658 /* Maintainer: Ben Dooks <ben-linux@fluff.org> */
659 .atag_offset = 0x100,
660
661 .init_irq = s3c24xx_init_irq,
662 .map_io = jive_map_io,
663 .init_machine = jive_machine_init,
664 .timer = &s3c24xx_timer,
665 .restart = s3c2412_restart,
666 MACHINE_END
667