1config SND_BF5XX_I2S
2	tristate "SoC I2S Audio for the ADI BF5xx chip"
3	depends on BLACKFIN
4	select SND_BF5XX_SOC_SPORT
5	help
6	  Say Y or M if you want to add support for codecs attached to
7	  the Blackfin SPORT (synchronous serial ports) interface in I2S
8	  mode (supports single stereo In/Out).
9	  You will also need to select the audio interfaces to support below.
10
11config SND_BF5XX_SOC_SSM2602
12	tristate "SoC SSM2602 Audio support for BF52x ezkit"
13	depends on SND_BF5XX_I2S
14	select SND_BF5XX_SOC_I2S
15	select SND_SOC_SSM2602
16	select I2C
17	help
18	  Say Y if you want to add support for SoC audio on BF527-EZKIT.
19
20config SND_BF5XX_SOC_AD73311
21	tristate "SoC AD73311 Audio support for Blackfin"
22	depends on SND_BF5XX_I2S
23	select SND_BF5XX_SOC_I2S
24	select SND_SOC_AD73311
25	help
26	  Say Y if you want to add support for AD73311 codec on Blackfin.
27
28config SND_BFIN_AD73311_SE
29	int "PF pin for AD73311L Chip Select"
30	depends on SND_BF5XX_SOC_AD73311
31	default 4
32	help
33	  Enter the GPIO used to control AD73311's SE pin. Acceptable
34	  values are 0 to 7
35
36config SND_BF5XX_TDM
37	tristate "SoC I2S(TDM mode) Audio for the ADI BF5xx chip"
38	depends on (BLACKFIN && SND_SOC)
39	select SND_BF5XX_SOC_SPORT
40	help
41	  Say Y or M if you want to add support for codecs attached to
42	  the Blackfin SPORT (synchronous serial ports) interface in TDM
43	  mode.
44	  You will also need to select the audio interfaces to support below.
45
46config SND_BF5XX_SOC_AD1836
47	tristate "SoC AD1836 Audio support for BF5xx"
48	depends on SND_BF5XX_TDM
49	select SND_BF5XX_SOC_TDM
50	select SND_SOC_AD1836
51	help
52	  Say Y if you want to add support for SoC audio on BF5xx STAMP/EZKIT.
53
54config SND_BF5XX_SOC_AD193X
55	tristate "SoC AD193X Audio support for Blackfin"
56	depends on SND_BF5XX_TDM
57	select SND_BF5XX_SOC_TDM
58	select SND_SOC_AD193X
59	help
60	  Say Y if you want to add support for AD193X codec on Blackfin.
61	  This driver supports AD1936, AD1937, AD1938 and AD1939.
62
63config SND_BF5XX_AC97
64	tristate "SoC AC97 Audio for the ADI BF5xx chip"
65	depends on BLACKFIN
66	select AC97_BUS
67	select SND_SOC_AC97_BUS
68	select SND_BF5XX_SOC_SPORT
69	select SND_BF5XX_SOC_AC97
70	help
71	  Say Y or M if you want to add support for codecs attached to
72	  the Blackfin SPORT (synchronous serial ports) interface in slot 16
73	  mode (pseudo AC97 interface).
74	  You will also need to select the audio interfaces to support below.
75
76	  Note:
77	  AC97 codecs which do not implement the slot-16 mode will not function
78	  properly with this driver. This driver is known to work with the
79	  Analog Devices line of AC97 codecs.
80
81config SND_BF5XX_MMAP_SUPPORT
82	bool "Enable MMAP Support"
83	depends on SND_BF5XX_AC97
84	default y
85	help
86	  Say y if you want AC97 driver to support mmap mode.
87	  We introduce an intermediate buffer to simulate mmap.
88
89config SND_BF5XX_MULTICHAN_SUPPORT
90	bool "Enable Multichannel Support"
91	depends on SND_BF5XX_AC97
92	default n
93	help
94	  Say y if you want AC97 driver to support up to 5.1 channel audio.
95	  this mode will consume much more memory for DMA.
96
97config SND_BF5XX_HAVE_COLD_RESET
98	bool "BOARD has COLD Reset GPIO"
99	depends on SND_BF5XX_AC97
100	default y if BFIN548_EZKIT
101	default n if !BFIN548_EZKIT
102
103config SND_BF5XX_RESET_GPIO_NUM
104	int "Set a GPIO for cold reset"
105	depends on SND_BF5XX_HAVE_COLD_RESET
106	range 0 159
107	default 19 if BFIN548_EZKIT
108	default 5 if BFIN537_STAMP
109	default 0
110	help
111	  Set the correct GPIO for RESET the sound chip.
112
113config SND_BF5XX_SOC_AD1980
114	tristate "SoC AD1980/1 Audio support for BF5xx (Obsolete)"
115	depends on SND_BF5XX_AC97
116	select SND_BF5XX_SOC_AC97
117	select SND_SOC_AD1980
118	help
119	  Say Y if you want to add support for SoC audio on BF5xx STAMP/EZKIT.
120
121	  Warning:
122	  Because Analog Devices Inc. discontinued the ad1980 sound chip since
123	  Sep. 2009, this ad1980 driver is not maintained, tested and supported
124	  by ADI now.
125
126config SND_BF5XX_SOC_SPORT
127	tristate
128
129config SND_BF5XX_SOC_I2S
130	tristate
131
132config SND_BF5XX_SOC_TDM
133	tristate
134
135config SND_BF5XX_SOC_AC97
136	tristate
137
138config SND_BF5XX_SPORT_NUM
139	int "Set a SPORT for Sound chip"
140	depends on (SND_BF5XX_I2S || SND_BF5XX_AC97 || SND_BF5XX_TDM)
141	range 0 3 if BF54x
142	range 0 1 if !BF54x
143	default 0
144	help
145	  Set the correct SPORT for sound chip.
146