1 /*
2  * Copyright(c) 2007 Intel Corporation. All rights reserved.
3  *
4  * This program is free software; you can redistribute it and/or modify it
5  * under the terms and conditions of the GNU General Public License,
6  * version 2, as published by the Free Software Foundation.
7  *
8  * This program is distributed in the hope it will be useful, but WITHOUT
9  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
10  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
11  * more details.
12  *
13  * You should have received a copy of the GNU General Public License along with
14  * this program; if not, write to the Free Software Foundation, Inc.,
15  * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
16  *
17  * Maintained at www.Open-FCoE.org
18  */
19 
20 #ifndef _FC_FCP_H_
21 #define	_FC_FCP_H_
22 
23 /*
24  * Fibre Channel Protocol for SCSI.
25  * From T10 FCP-3, T10 project 1560-D Rev 4, Sept. 13, 2005.
26  */
27 
28 /*
29  * fc/fs.h defines FC_TYPE_FCP.
30  */
31 
32 /*
33  * Service parameter page parameters (word 3 bits) for Process Login.
34  */
35 #define	FCP_SPPF_TASK_RETRY_ID	0x0200	/* task retry ID requested */
36 #define	FCP_SPPF_RETRY		0x0100	/* retry supported */
37 #define	FCP_SPPF_CONF_COMPL	0x0080	/* confirmed completion allowed */
38 #define	FCP_SPPF_OVLY_ALLOW	0x0040	/* data overlay allowed */
39 #define	FCP_SPPF_INIT_FCN	0x0020	/* initiator function */
40 #define	FCP_SPPF_TARG_FCN	0x0010	/* target function */
41 #define	FCP_SPPF_RD_XRDY_DIS	0x0002	/* disable XFER_RDY for reads */
42 #define	FCP_SPPF_WR_XRDY_DIS	0x0001	/* disable XFER_RDY for writes */
43 
44 /*
45  * FCP_CMND IU Payload.
46  */
47 struct fcp_cmnd {
48 	__u8		fc_lun[8];	/* logical unit number */
49 	__u8		fc_cmdref;	/* command reference number */
50 	__u8		fc_pri_ta;	/* priority and task attribute */
51 	__u8		fc_tm_flags;	/* task management flags */
52 	__u8		fc_flags;	/* additional len & flags */
53 	__u8		fc_cdb[16];	/* base CDB */
54 	__be32		fc_dl;		/* data length (must follow fc_cdb) */
55 };
56 
57 #define	FCP_CMND_LEN	32	/* expected length of structure */
58 
59 struct fcp_cmnd32 {
60 	__u8		fc_lun[8];	/* logical unit number */
61 	__u8		fc_cmdref;	/* command reference number */
62 	__u8		fc_pri_ta;	/* priority and task attribute */
63 	__u8		fc_tm_flags;	/* task management flags */
64 	__u8		fc_flags;	/* additional len & flags */
65 	__u8		fc_cdb[32];	/* base CDB */
66 	__be32		fc_dl;		/* data length (must follow fc_cdb) */
67 };
68 
69 #define	FCP_CMND32_LEN	    48	/* expected length of structure */
70 #define	FCP_CMND32_ADD_LEN  (16 / 4)	/* Additional cdb length */
71 
72 /*
73  * fc_pri_ta.
74  */
75 #define	FCP_PTA_SIMPLE	    0	/* simple task attribute */
76 #define	FCP_PTA_HEADQ	    1	/* head of queue task attribute */
77 #define	FCP_PTA_ORDERED     2	/* ordered task attribute */
78 #define	FCP_PTA_ACA	    4	/* auto. contingent allegiance */
79 #define	FCP_PTA_MASK	    7	/* mask for task attribute field */
80 #define	FCP_PRI_SHIFT	    3	/* priority field starts in bit 3 */
81 #define	FCP_PRI_RESVD_MASK  0x80	/* reserved bits in priority field */
82 
83 /*
84  * fc_tm_flags - task management flags field.
85  */
86 #define	FCP_TMF_CLR_ACA		0x40	/* clear ACA condition */
87 #define	FCP_TMF_TGT_RESET	0x20	/* target reset task management,
88 					   deprecated as of FCP-3 */
89 #define	FCP_TMF_LUN_RESET	0x10	/* logical unit reset task management */
90 #define	FCP_TMF_CLR_TASK_SET	0x04	/* clear task set */
91 #define	FCP_TMF_ABT_TASK_SET	0x02	/* abort task set */
92 
93 /*
94  * fc_flags.
95  *  Bits 7:2 are the additional FCP_CDB length / 4.
96  */
97 #define	FCP_CFL_LEN_MASK	0xfc	/* mask for additional length */
98 #define	FCP_CFL_LEN_SHIFT	2	/* shift bits for additional length */
99 #define	FCP_CFL_RDDATA		0x02	/* read data */
100 #define	FCP_CFL_WRDATA		0x01	/* write data */
101 
102 /*
103  * FCP_TXRDY IU - transfer ready payload.
104  */
105 struct fcp_txrdy {
106 	__be32		ft_data_ro;	/* data relative offset */
107 	__be32		ft_burst_len;	/* burst length */
108 	__u8		_ft_resvd[4];	/* reserved */
109 };
110 
111 #define	FCP_TXRDY_LEN	12	/* expected length of structure */
112 
113 /*
114  * FCP_RESP IU - response payload.
115  *
116  * The response payload comes in three parts: the flags/status, the
117  * sense/response lengths and the sense data/response info section.
118  *
119  * From FCP3r04, note 6 of section 9.5.13:
120  *
121  * Some early implementations presented the FCP_RSP IU without the FCP_RESID,
122  * FCP_SNS_LEN, and FCP_RSP_LEN fields if the FCP_RESID_UNDER, FCP_RESID_OVER,
123  * FCP_SNS_LEN_VALID, and FCP_RSP_LEN_VALID bits were all set to zero. This
124  * non-standard behavior should be tolerated.
125  *
126  * All response frames will always contain the fcp_resp template.  Some
127  * will also include the fcp_resp_len template.
128  */
129 struct fcp_resp {
130 	__u8		_fr_resvd[8];	/* reserved */
131 	__be16		fr_retry_delay;	/* retry delay timer */
132 	__u8		fr_flags;	/* flags */
133 	__u8		fr_status;	/* SCSI status code */
134 };
135 
136 #define	FCP_RESP_LEN	12	/* expected length of structure */
137 
138 struct fcp_resp_ext {
139 	__be32		fr_resid;	/* Residual value */
140 	__be32		fr_sns_len;	/* SCSI Sense length */
141 	__be32		fr_rsp_len;	/* Response Info length */
142 
143 	/*
144 	 * Optionally followed by RSP info and/or SNS info and/or
145 	 * bidirectional read residual length, if any.
146 	 */
147 };
148 
149 #define FCP_RESP_EXT_LEN    12  /* expected length of the structure */
150 
151 struct fcp_resp_rsp_info {
152     __u8      _fr_resvd[3];       /* reserved */
153     __u8      rsp_code;           /* Response Info Code */
154     __u8      _fr_resvd2[4];      /* reserved */
155 };
156 
157 struct fcp_resp_with_ext {
158 	struct fcp_resp resp;
159 	struct fcp_resp_ext ext;
160 };
161 
162 #define	FCP_RESP_WITH_EXT   (FCP_RESP_LEN + FCP_RESP_EXT_LEN)
163 
164 /*
165  * fr_flags.
166  */
167 #define	FCP_BIDI_RSP	    0x80	/* bidirectional read response */
168 #define	FCP_BIDI_READ_UNDER 0x40	/* bidir. read less than requested */
169 #define	FCP_BIDI_READ_OVER  0x20	/* DL insufficient for full transfer */
170 #define	FCP_CONF_REQ	    0x10	/* confirmation requested */
171 #define	FCP_RESID_UNDER     0x08	/* transfer shorter than expected */
172 #define	FCP_RESID_OVER	    0x04	/* DL insufficient for full transfer */
173 #define	FCP_SNS_LEN_VAL     0x02	/* SNS_LEN field is valid */
174 #define	FCP_RSP_LEN_VAL     0x01	/* RSP_LEN field is valid */
175 
176 /*
177  * rsp_codes
178  */
179 enum fcp_resp_rsp_codes {
180 	FCP_TMF_CMPL = 0,
181 	FCP_DATA_LEN_INVALID = 1,
182 	FCP_CMND_FIELDS_INVALID = 2,
183 	FCP_DATA_PARAM_MISMATCH = 3,
184 	FCP_TMF_REJECTED = 4,
185 	FCP_TMF_FAILED = 5,
186 	FCP_TMF_INVALID_LUN = 9,
187 };
188 
189 /*
190  * FCP SRR Link Service request - Sequence Retransmission Request.
191  */
192 struct fcp_srr {
193 	__u8		srr_op;		/* opcode ELS_SRR */
194 	__u8		srr_resvd[3];	/* opcode / reserved - must be zero */
195 	__be16		srr_ox_id;	/* OX_ID of failed command */
196 	__be16		srr_rx_id;	/* RX_ID of failed command */
197 	__be32		srr_rel_off;	/* relative offset */
198 	__u8		srr_r_ctl;	/* r_ctl for the information unit */
199 	__u8		srr_resvd2[3];	/* reserved */
200 };
201 
202 /*
203  * Feature bits in name server FC-4 Features object.
204  */
205 #define	FCP_FEAT_TARG	(1 << 0)	/* target function supported */
206 #define	FCP_FEAT_INIT	(1 << 1)	/* initiator function supported */
207 
208 #endif /* _FC_FCP_H_ */
209