1 /*
2 * Siemens Gigaset 307x driver
3 * Common header file for all connection variants
4 *
5 * Written by Stefan Eilers
6 * and Hansjoerg Lipp <hjlipp@web.de>
7 *
8 * =====================================================================
9 * This program is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License as
11 * published by the Free Software Foundation; either version 2 of
12 * the License, or (at your option) any later version.
13 * =====================================================================
14 */
15
16 #ifndef GIGASET_H
17 #define GIGASET_H
18
19 /* define global prefix for pr_ macros in linux/kernel.h */
20 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
21
22 #include <linux/kernel.h>
23 #include <linux/sched.h>
24 #include <linux/compiler.h>
25 #include <linux/types.h>
26 #include <linux/ctype.h>
27 #include <linux/slab.h>
28 #include <linux/spinlock.h>
29 #include <linux/skbuff.h>
30 #include <linux/netdevice.h>
31 #include <linux/ppp_defs.h>
32 #include <linux/timer.h>
33 #include <linux/interrupt.h>
34 #include <linux/tty.h>
35 #include <linux/tty_driver.h>
36 #include <linux/list.h>
37 #include <asm/atomic.h>
38
39 #define GIG_VERSION {0, 5, 0, 0}
40 #define GIG_COMPAT {0, 4, 0, 0}
41
42 #define MAX_REC_PARAMS 10 /* Max. number of params in response string */
43 #define MAX_RESP_SIZE 511 /* Max. size of a response string */
44
45 #define MAX_EVENTS 64 /* size of event queue */
46
47 #define RBUFSIZE 8192
48
49 #define GIG_TICK 100 /* in milliseconds */
50
51 /* timeout values (unit: 1 sec) */
52 #define INIT_TIMEOUT 1
53
54 /* timeout values (unit: 0.1 sec) */
55 #define RING_TIMEOUT 3 /* for additional parameters to RING */
56 #define BAS_TIMEOUT 20 /* for response to Base USB ops */
57 #define ATRDY_TIMEOUT 3 /* for HD_READY_SEND_ATDATA */
58
59 #define BAS_RETRY 3 /* max. retries for base USB ops */
60
61 #define MAXACT 3
62
63 extern int gigaset_debuglevel; /* "needs" cast to (enum debuglevel) */
64
65 /* debug flags, combine by adding/bitwise OR */
66 enum debuglevel {
67 DEBUG_INTR = 0x00008, /* interrupt processing */
68 DEBUG_CMD = 0x00020, /* sent/received LL commands */
69 DEBUG_STREAM = 0x00040, /* application data stream I/O events */
70 DEBUG_STREAM_DUMP = 0x00080, /* application data stream content */
71 DEBUG_LLDATA = 0x00100, /* sent/received LL data */
72 DEBUG_EVENT = 0x00200, /* event processing */
73 DEBUG_HDLC = 0x00800, /* M10x HDLC processing */
74 DEBUG_CHANNEL = 0x01000, /* channel allocation/deallocation */
75 DEBUG_TRANSCMD = 0x02000, /* AT-COMMANDS+RESPONSES */
76 DEBUG_MCMD = 0x04000, /* COMMANDS THAT ARE SENT VERY OFTEN */
77 DEBUG_INIT = 0x08000, /* (de)allocation+initialization of data
78 structures */
79 DEBUG_SUSPEND = 0x10000, /* suspend/resume processing */
80 DEBUG_OUTPUT = 0x20000, /* output to device */
81 DEBUG_ISO = 0x40000, /* isochronous transfers */
82 DEBUG_IF = 0x80000, /* character device operations */
83 DEBUG_USBREQ = 0x100000, /* USB communication (except payload
84 data) */
85 DEBUG_LOCKCMD = 0x200000, /* AT commands and responses when
86 MS_LOCKED */
87
88 DEBUG_ANY = 0x3fffff, /* print message if any of the others is
89 activated */
90 };
91
92 #ifdef CONFIG_GIGASET_DEBUG
93
94 #define gig_dbg(level, format, arg...) \
95 do { \
96 if (unlikely(((enum debuglevel)gigaset_debuglevel) & (level))) \
97 printk(KERN_DEBUG KBUILD_MODNAME ": " format "\n", \
98 ## arg); \
99 } while (0)
100 #define DEBUG_DEFAULT (DEBUG_TRANSCMD | DEBUG_CMD | DEBUG_USBREQ)
101
102 #else
103
104 #define gig_dbg(level, format, arg...) do {} while (0)
105 #define DEBUG_DEFAULT 0
106
107 #endif
108
109 void gigaset_dbg_buffer(enum debuglevel level, const unsigned char *msg,
110 size_t len, const unsigned char *buf);
111
112 /* connection state */
113 #define ZSAU_NONE 0
114 #define ZSAU_DISCONNECT_IND 4
115 #define ZSAU_OUTGOING_CALL_PROCEEDING 1
116 #define ZSAU_PROCEEDING 1
117 #define ZSAU_CALL_DELIVERED 2
118 #define ZSAU_ACTIVE 3
119 #define ZSAU_NULL 5
120 #define ZSAU_DISCONNECT_REQ 6
121 #define ZSAU_UNKNOWN -1
122
123 /* USB control transfer requests */
124 #define OUT_VENDOR_REQ (USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_ENDPOINT)
125 #define IN_VENDOR_REQ (USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_ENDPOINT)
126
127 /* interrupt pipe messages */
128 #define HD_B1_FLOW_CONTROL 0x80
129 #define HD_B2_FLOW_CONTROL 0x81
130 #define HD_RECEIVEATDATA_ACK (0x35) /* 3070 */
131 #define HD_READY_SEND_ATDATA (0x36) /* 3070 */
132 #define HD_OPEN_ATCHANNEL_ACK (0x37) /* 3070 */
133 #define HD_CLOSE_ATCHANNEL_ACK (0x38) /* 3070 */
134 #define HD_DEVICE_INIT_OK (0x11) /* ISurf USB + 3070 */
135 #define HD_OPEN_B1CHANNEL_ACK (0x51) /* ISurf USB + 3070 */
136 #define HD_OPEN_B2CHANNEL_ACK (0x52) /* ISurf USB + 3070 */
137 #define HD_CLOSE_B1CHANNEL_ACK (0x53) /* ISurf USB + 3070 */
138 #define HD_CLOSE_B2CHANNEL_ACK (0x54) /* ISurf USB + 3070 */
139 #define HD_SUSPEND_END (0x61) /* ISurf USB */
140 #define HD_RESET_INTERRUPT_PIPE_ACK (0xFF) /* ISurf USB + 3070 */
141
142 /* control requests */
143 #define HD_OPEN_B1CHANNEL (0x23) /* ISurf USB + 3070 */
144 #define HD_CLOSE_B1CHANNEL (0x24) /* ISurf USB + 3070 */
145 #define HD_OPEN_B2CHANNEL (0x25) /* ISurf USB + 3070 */
146 #define HD_CLOSE_B2CHANNEL (0x26) /* ISurf USB + 3070 */
147 #define HD_RESET_INTERRUPT_PIPE (0x27) /* ISurf USB + 3070 */
148 #define HD_DEVICE_INIT_ACK (0x34) /* ISurf USB + 3070 */
149 #define HD_WRITE_ATMESSAGE (0x12) /* 3070 */
150 #define HD_READ_ATMESSAGE (0x13) /* 3070 */
151 #define HD_OPEN_ATCHANNEL (0x28) /* 3070 */
152 #define HD_CLOSE_ATCHANNEL (0x29) /* 3070 */
153
154 /* number of B channels supported by base driver */
155 #define BAS_CHANNELS 2
156
157 /* USB frames for isochronous transfer */
158 #define BAS_FRAMETIME 1 /* number of milliseconds between frames */
159 #define BAS_NUMFRAMES 8 /* number of frames per URB */
160 #define BAS_MAXFRAME 16 /* allocated bytes per frame */
161 #define BAS_NORMFRAME 8 /* send size without flow control */
162 #define BAS_HIGHFRAME 10 /* " " with positive flow control */
163 #define BAS_LOWFRAME 5 /* " " with negative flow control */
164 #define BAS_CORRFRAMES 4 /* flow control multiplicator */
165
166 #define BAS_INBUFSIZE (BAS_MAXFRAME * BAS_NUMFRAMES)
167 /* size of isoc in buf per URB */
168 #define BAS_OUTBUFSIZE 4096 /* size of common isoc out buffer */
169 #define BAS_OUTBUFPAD BAS_MAXFRAME /* size of pad area for isoc out buf */
170
171 #define BAS_INURBS 3
172 #define BAS_OUTURBS 3
173
174 /* variable commands in struct bc_state */
175 #define AT_ISO 0
176 #define AT_DIAL 1
177 #define AT_MSN 2
178 #define AT_BC 3
179 #define AT_PROTO 4
180 #define AT_TYPE 5
181 #define AT_CLIP 6
182 /* total number */
183 #define AT_NUM 7
184
185 /* variables in struct at_state_t */
186 #define VAR_ZSAU 0
187 #define VAR_ZDLE 1
188 #define VAR_ZCTP 2
189 #define VAR_NUM 3
190
191 #define STR_NMBR 0
192 #define STR_ZCPN 1
193 #define STR_ZCON 2
194 #define STR_ZBC 3
195 #define STR_ZHLC 4
196 #define STR_NUM 5
197
198 #define EV_TIMEOUT -105
199 #define EV_IF_VER -106
200 #define EV_PROC_CIDMODE -107
201 #define EV_SHUTDOWN -108
202 #define EV_START -110
203 #define EV_STOP -111
204 #define EV_IF_LOCK -112
205 #define EV_ACCEPT -114
206 #define EV_DIAL -115
207 #define EV_HUP -116
208 #define EV_BC_OPEN -117
209 #define EV_BC_CLOSED -118
210
211 /* input state */
212 #define INS_command 0x0001 /* receiving messages (not payload data) */
213 #define INS_DLE_char 0x0002 /* DLE flag received (in DLE mode) */
214 #define INS_byte_stuff 0x0004
215 #define INS_have_data 0x0008
216 #define INS_DLE_command 0x0020 /* DLE message start (<DLE> X) received */
217 #define INS_flag_hunt 0x0040
218
219 /* channel state */
220 #define CHS_D_UP 0x01
221 #define CHS_B_UP 0x02
222 #define CHS_NOTIFY_LL 0x04
223
224 #define ICALL_REJECT 0
225 #define ICALL_ACCEPT 1
226 #define ICALL_IGNORE 2
227
228 /* device state */
229 #define MS_UNINITIALIZED 0
230 #define MS_INIT 1
231 #define MS_LOCKED 2
232 #define MS_SHUTDOWN 3
233 #define MS_RECOVER 4
234 #define MS_READY 5
235
236 /* mode */
237 #define M_UNKNOWN 0
238 #define M_CONFIG 1
239 #define M_UNIMODEM 2
240 #define M_CID 3
241
242 /* start mode */
243 #define SM_LOCKED 0
244 #define SM_ISDN 1 /* default */
245
246 /* layer 2 protocols (AT^SBPR=...) */
247 #define L2_BITSYNC 0
248 #define L2_HDLC 1
249 #define L2_VOICE 2
250
251 struct gigaset_ops;
252 struct gigaset_driver;
253
254 struct usb_cardstate;
255 struct ser_cardstate;
256 struct bas_cardstate;
257
258 struct bc_state;
259 struct usb_bc_state;
260 struct ser_bc_state;
261 struct bas_bc_state;
262
263 struct reply_t {
264 int resp_code; /* RSP_XXXX */
265 int min_ConState; /* <0 => ignore */
266 int max_ConState; /* <0 => ignore */
267 int parameter; /* e.g. ZSAU_XXXX <0: ignore*/
268 int new_ConState; /* <0 => ignore */
269 int timeout; /* >0 => *HZ; <=0 => TOUT_XXXX*/
270 int action[MAXACT]; /* ACT_XXXX */
271 char *command; /* NULL==none */
272 };
273
274 extern struct reply_t gigaset_tab_cid[];
275 extern struct reply_t gigaset_tab_nocid[];
276
277 struct inbuf_t {
278 struct cardstate *cs;
279 int inputstate;
280 int head, tail;
281 unsigned char data[RBUFSIZE];
282 };
283
284 /* isochronous write buffer structure
285 * circular buffer with pad area for extraction of complete USB frames
286 * - data[read..nextread-1] is valid data already submitted to the USB subsystem
287 * - data[nextread..write-1] is valid data yet to be sent
288 * - data[write] is the next byte to write to
289 * - in byte-oriented L2 procotols, it is completely free
290 * - in bit-oriented L2 procotols, it may contain a partial byte of valid data
291 * - data[write+1..read-1] is free
292 * - wbits is the number of valid data bits in data[write], starting at the LSB
293 * - writesem is the semaphore for writing to the buffer:
294 * if writesem <= 0, data[write..read-1] is currently being written to
295 * - idle contains the byte value to repeat when the end of valid data is
296 * reached; if nextread==write (buffer contains no data to send), either the
297 * BAS_OUTBUFPAD bytes immediately before data[write] (if
298 * write>=BAS_OUTBUFPAD) or those of the pad area (if write<BAS_OUTBUFPAD)
299 * are also filled with that value
300 */
301 struct isowbuf_t {
302 int read;
303 int nextread;
304 int write;
305 atomic_t writesem;
306 int wbits;
307 unsigned char data[BAS_OUTBUFSIZE + BAS_OUTBUFPAD];
308 unsigned char idle;
309 };
310
311 /* isochronous write URB context structure
312 * data to be stored along with the URB and retrieved when it is returned
313 * as completed by the USB subsystem
314 * - urb: pointer to the URB itself
315 * - bcs: pointer to the B Channel control structure
316 * - limit: end of write buffer area covered by this URB
317 * - status: URB completion status
318 */
319 struct isow_urbctx_t {
320 struct urb *urb;
321 struct bc_state *bcs;
322 int limit;
323 int status;
324 };
325
326 /* AT state structure
327 * data associated with the state of an ISDN connection, whether or not
328 * it is currently assigned a B channel
329 */
330 struct at_state_t {
331 struct list_head list;
332 int waiting;
333 int getstring;
334 unsigned timer_index;
335 unsigned long timer_expires;
336 int timer_active;
337 unsigned int ConState; /* State of connection */
338 struct reply_t *replystruct;
339 int cid;
340 int int_var[VAR_NUM]; /* see VAR_XXXX */
341 char *str_var[STR_NUM]; /* see STR_XXXX */
342 unsigned pending_commands; /* see PC_XXXX */
343 unsigned seq_index;
344
345 struct cardstate *cs;
346 struct bc_state *bcs;
347 };
348
349 struct event_t {
350 int type;
351 void *ptr, *arg;
352 int parameter;
353 int cid;
354 struct at_state_t *at_state;
355 };
356
357 /* This buffer holds all information about the used B-Channel */
358 struct bc_state {
359 struct sk_buff *tx_skb; /* Current transfer buffer to modem */
360 struct sk_buff_head squeue; /* B-Channel send Queue */
361
362 /* Variables for debugging .. */
363 int corrupted; /* Counter for corrupted packages */
364 int trans_down; /* Counter of packages (downstream) */
365 int trans_up; /* Counter of packages (upstream) */
366
367 struct at_state_t at_state;
368
369 /* receive buffer */
370 unsigned rx_bufsize; /* max size accepted by application */
371 struct sk_buff *rx_skb;
372 __u16 rx_fcs;
373 int inputstate; /* see INS_XXXX */
374
375 int channel;
376
377 struct cardstate *cs;
378
379 unsigned chstate; /* bitmap (CHS_*) */
380 int ignore;
381 unsigned proto2; /* layer 2 protocol (L2_*) */
382 char *commands[AT_NUM]; /* see AT_XXXX */
383
384 #ifdef CONFIG_GIGASET_DEBUG
385 int emptycount;
386 #endif
387 int busy;
388 int use_count;
389
390 /* private data of hardware drivers */
391 union {
392 struct ser_bc_state *ser; /* serial hardware driver */
393 struct usb_bc_state *usb; /* usb hardware driver (m105) */
394 struct bas_bc_state *bas; /* usb hardware driver (base) */
395 } hw;
396
397 void *ap; /* associated LL application */
398 int apconnstate; /* LL application connection state */
399 spinlock_t aplock;
400 };
401
402 struct cardstate {
403 struct gigaset_driver *driver;
404 unsigned minor_index;
405 struct device *dev;
406 struct device *tty_dev;
407 unsigned flags;
408
409 const struct gigaset_ops *ops;
410
411 /* Stuff to handle communication */
412 wait_queue_head_t waitqueue;
413 int waiting;
414 int mode; /* see M_XXXX */
415 int mstate; /* Modem state: see MS_XXXX */
416 /* only changed by the event layer */
417 int cmd_result;
418
419 int channels;
420 struct bc_state *bcs; /* Array of struct bc_state */
421
422 int onechannel; /* data and commands transmitted in one
423 stream (M10x) */
424
425 spinlock_t lock;
426 struct at_state_t at_state; /* at_state_t for cid == 0 */
427 struct list_head temp_at_states;/* list of temporary "struct
428 at_state_t"s without B channel */
429
430 struct inbuf_t *inbuf;
431
432 struct cmdbuf_t *cmdbuf, *lastcmdbuf;
433 spinlock_t cmdlock;
434 unsigned curlen, cmdbytes;
435
436 unsigned open_count;
437 struct tty_struct *tty;
438 struct tasklet_struct if_wake_tasklet;
439 unsigned control_state;
440
441 unsigned fwver[4];
442 int gotfwver;
443
444 unsigned running; /* !=0 if events are handled */
445 unsigned connected; /* !=0 if hardware is connected */
446 unsigned isdn_up; /* !=0 after gigaset_isdn_start() */
447
448 unsigned cidmode;
449
450 int myid; /* id for communication with LL */
451 void *iif; /* LL interface structure */
452 unsigned short hw_hdr_len; /* headroom needed in data skbs */
453
454 struct reply_t *tabnocid;
455 struct reply_t *tabcid;
456 int cs_init;
457 int ignoreframes; /* frames to ignore after setting up the
458 B channel */
459 struct mutex mutex; /* locks this structure:
460 * connected is not changed,
461 * hardware_up is not changed,
462 * MState is not changed to or from
463 * MS_LOCKED */
464
465 struct timer_list timer;
466 int retry_count;
467 int dle; /* !=0 if DLE mode is active
468 (ZDLE=1 received -- M10x only) */
469 int cur_at_seq; /* sequence of AT commands being
470 processed */
471 int curchannel; /* channel those commands are meant
472 for */
473 int commands_pending; /* flag(s) in xxx.commands_pending have
474 been set */
475 struct tasklet_struct event_tasklet;
476 /* tasklet for serializing AT commands.
477 * Scheduled
478 * -> for modem reponses (and
479 * incoming data for M10x)
480 * -> on timeout
481 * -> after setting bits in
482 * xxx.at_state.pending_command
483 * (e.g. command from LL) */
484 struct tasklet_struct write_tasklet;
485 /* tasklet for serial output
486 * (not used in base driver) */
487
488 /* event queue */
489 struct event_t events[MAX_EVENTS];
490 unsigned ev_tail, ev_head;
491 spinlock_t ev_lock;
492
493 /* current modem response */
494 unsigned char respdata[MAX_RESP_SIZE+1];
495 unsigned cbytes;
496
497 /* private data of hardware drivers */
498 union {
499 struct usb_cardstate *usb; /* USB hardware driver (m105) */
500 struct ser_cardstate *ser; /* serial hardware driver */
501 struct bas_cardstate *bas; /* USB hardware driver (base) */
502 } hw;
503 };
504
505 struct gigaset_driver {
506 struct list_head list;
507 spinlock_t lock; /* locks minor tables and blocked */
508 struct tty_driver *tty;
509 unsigned have_tty;
510 unsigned minor;
511 unsigned minors;
512 struct cardstate *cs;
513 int blocked;
514
515 const struct gigaset_ops *ops;
516 struct module *owner;
517 };
518
519 struct cmdbuf_t {
520 struct cmdbuf_t *next, *prev;
521 int len, offset;
522 struct tasklet_struct *wake_tasklet;
523 unsigned char buf[0];
524 };
525
526 struct bas_bc_state {
527 /* isochronous output state */
528 int running;
529 atomic_t corrbytes;
530 spinlock_t isooutlock;
531 struct isow_urbctx_t isoouturbs[BAS_OUTURBS];
532 struct isow_urbctx_t *isooutdone, *isooutfree, *isooutovfl;
533 struct isowbuf_t *isooutbuf;
534 unsigned numsub; /* submitted URB counter
535 (for diagnostic messages only) */
536 struct tasklet_struct sent_tasklet;
537
538 /* isochronous input state */
539 spinlock_t isoinlock;
540 struct urb *isoinurbs[BAS_INURBS];
541 unsigned char isoinbuf[BAS_INBUFSIZE * BAS_INURBS];
542 struct urb *isoindone; /* completed isoc read URB */
543 int isoinstatus; /* status of completed URB */
544 int loststatus; /* status of dropped URB */
545 unsigned isoinlost; /* number of bytes lost */
546 /* state of bit unstuffing algorithm
547 (in addition to BC_state.inputstate) */
548 unsigned seqlen; /* number of '1' bits not yet
549 unstuffed */
550 unsigned inbyte, inbits; /* collected bits for next byte */
551 /* statistics */
552 unsigned goodbytes; /* bytes correctly received */
553 unsigned alignerrs; /* frames with incomplete byte at end */
554 unsigned fcserrs; /* FCS errors */
555 unsigned frameerrs; /* framing errors */
556 unsigned giants; /* long frames */
557 unsigned runts; /* short frames */
558 unsigned aborts; /* HDLC aborts */
559 unsigned shared0s; /* '0' bits shared between flags */
560 unsigned stolen0s; /* '0' stuff bits also serving as
561 leading flag bits */
562 struct tasklet_struct rcvd_tasklet;
563 };
564
565 struct gigaset_ops {
566 /* Called from ev-layer.c/interface.c for sending AT commands to the
567 device */
568 int (*write_cmd)(struct cardstate *cs, struct cmdbuf_t *cb);
569
570 /* Called from interface.c for additional device control */
571 int (*write_room)(struct cardstate *cs);
572 int (*chars_in_buffer)(struct cardstate *cs);
573 int (*brkchars)(struct cardstate *cs, const unsigned char buf[6]);
574
575 /* Called from ev-layer.c after setting up connection
576 * Should call gigaset_bchannel_up(), when finished. */
577 int (*init_bchannel)(struct bc_state *bcs);
578
579 /* Called from ev-layer.c after hanging up
580 * Should call gigaset_bchannel_down(), when finished. */
581 int (*close_bchannel)(struct bc_state *bcs);
582
583 /* Called by gigaset_initcs() for setting up bcs->hw.xxx */
584 int (*initbcshw)(struct bc_state *bcs);
585
586 /* Called by gigaset_freecs() for freeing bcs->hw.xxx */
587 int (*freebcshw)(struct bc_state *bcs);
588
589 /* Called by gigaset_bchannel_down() for resetting bcs->hw.xxx */
590 void (*reinitbcshw)(struct bc_state *bcs);
591
592 /* Called by gigaset_initcs() for setting up cs->hw.xxx */
593 int (*initcshw)(struct cardstate *cs);
594
595 /* Called by gigaset_freecs() for freeing cs->hw.xxx */
596 void (*freecshw)(struct cardstate *cs);
597
598 /* Called from common.c/interface.c for additional serial port
599 control */
600 int (*set_modem_ctrl)(struct cardstate *cs, unsigned old_state,
601 unsigned new_state);
602 int (*baud_rate)(struct cardstate *cs, unsigned cflag);
603 int (*set_line_ctrl)(struct cardstate *cs, unsigned cflag);
604
605 /* Called from LL interface to put an skb into the send-queue.
606 * After sending is completed, gigaset_skb_sent() must be called
607 * with the skb's link layer header preserved. */
608 int (*send_skb)(struct bc_state *bcs, struct sk_buff *skb);
609
610 /* Called from ev-layer.c to process a block of data
611 * received through the common/control channel. */
612 void (*handle_input)(struct inbuf_t *inbuf);
613
614 };
615
616 /* = Common structures and definitions =======================================
617 */
618
619 /* Parser states for DLE-Event:
620 * <DLE-EVENT>: <DLE_FLAG> "X" <EVENT> <DLE_FLAG> "."
621 * <DLE_FLAG>: 0x10
622 * <EVENT>: ((a-z)* | (A-Z)* | (0-10)*)+
623 */
624 #define DLE_FLAG 0x10
625
626 /* ===========================================================================
627 * Functions implemented in asyncdata.c
628 */
629
630 /* Called from LL interface to put an skb into the send queue. */
631 int gigaset_m10x_send_skb(struct bc_state *bcs, struct sk_buff *skb);
632
633 /* Called from ev-layer.c to process a block of data
634 * received through the common/control channel. */
635 void gigaset_m10x_input(struct inbuf_t *inbuf);
636
637 /* ===========================================================================
638 * Functions implemented in isocdata.c
639 */
640
641 /* Called from LL interface to put an skb into the send queue. */
642 int gigaset_isoc_send_skb(struct bc_state *bcs, struct sk_buff *skb);
643
644 /* Called from ev-layer.c to process a block of data
645 * received through the common/control channel. */
646 void gigaset_isoc_input(struct inbuf_t *inbuf);
647
648 /* Called from bas-gigaset.c to process a block of data
649 * received through the isochronous channel */
650 void gigaset_isoc_receive(unsigned char *src, unsigned count,
651 struct bc_state *bcs);
652
653 /* Called from bas-gigaset.c to put a block of data
654 * into the isochronous output buffer */
655 int gigaset_isoc_buildframe(struct bc_state *bcs, unsigned char *in, int len);
656
657 /* Called from bas-gigaset.c to initialize the isochronous output buffer */
658 void gigaset_isowbuf_init(struct isowbuf_t *iwb, unsigned char idle);
659
660 /* Called from bas-gigaset.c to retrieve a block of bytes for sending */
661 int gigaset_isowbuf_getbytes(struct isowbuf_t *iwb, int size);
662
663 /* ===========================================================================
664 * Functions implemented in LL interface
665 */
666
667 /* Called from common.c for setting up/shutting down with the ISDN subsystem */
668 void gigaset_isdn_regdrv(void);
669 void gigaset_isdn_unregdrv(void);
670 int gigaset_isdn_regdev(struct cardstate *cs, const char *isdnid);
671 void gigaset_isdn_unregdev(struct cardstate *cs);
672
673 /* Called from hardware module to indicate completion of an skb */
674 void gigaset_skb_sent(struct bc_state *bcs, struct sk_buff *skb);
675 void gigaset_skb_rcvd(struct bc_state *bcs, struct sk_buff *skb);
676 void gigaset_isdn_rcv_err(struct bc_state *bcs);
677
678 /* Called from common.c/ev-layer.c to indicate events relevant to the LL */
679 void gigaset_isdn_start(struct cardstate *cs);
680 void gigaset_isdn_stop(struct cardstate *cs);
681 int gigaset_isdn_icall(struct at_state_t *at_state);
682 void gigaset_isdn_connD(struct bc_state *bcs);
683 void gigaset_isdn_hupD(struct bc_state *bcs);
684 void gigaset_isdn_connB(struct bc_state *bcs);
685 void gigaset_isdn_hupB(struct bc_state *bcs);
686
687 /* ===========================================================================
688 * Functions implemented in ev-layer.c
689 */
690
691 /* tasklet called from common.c to process queued events */
692 void gigaset_handle_event(unsigned long data);
693
694 /* called from isocdata.c / asyncdata.c
695 * when a complete modem response line has been received */
696 void gigaset_handle_modem_response(struct cardstate *cs);
697
698 /* ===========================================================================
699 * Functions implemented in proc.c
700 */
701
702 /* initialize sysfs for device */
703 void gigaset_init_dev_sysfs(struct cardstate *cs);
704 void gigaset_free_dev_sysfs(struct cardstate *cs);
705
706 /* ===========================================================================
707 * Functions implemented in common.c/gigaset.h
708 */
709
710 void gigaset_bcs_reinit(struct bc_state *bcs);
711 void gigaset_at_init(struct at_state_t *at_state, struct bc_state *bcs,
712 struct cardstate *cs, int cid);
713 int gigaset_get_channel(struct bc_state *bcs);
714 struct bc_state *gigaset_get_free_channel(struct cardstate *cs);
715 void gigaset_free_channel(struct bc_state *bcs);
716 int gigaset_get_channels(struct cardstate *cs);
717 void gigaset_free_channels(struct cardstate *cs);
718 void gigaset_block_channels(struct cardstate *cs);
719
720 /* Allocate and initialize driver structure. */
721 struct gigaset_driver *gigaset_initdriver(unsigned minor, unsigned minors,
722 const char *procname,
723 const char *devname,
724 const struct gigaset_ops *ops,
725 struct module *owner);
726
727 /* Deallocate driver structure. */
728 void gigaset_freedriver(struct gigaset_driver *drv);
729
730 struct cardstate *gigaset_get_cs_by_tty(struct tty_struct *tty);
731 struct cardstate *gigaset_get_cs_by_id(int id);
732 void gigaset_blockdriver(struct gigaset_driver *drv);
733
734 /* Allocate and initialize card state. Calls hardware dependent
735 gigaset_init[b]cs(). */
736 struct cardstate *gigaset_initcs(struct gigaset_driver *drv, int channels,
737 int onechannel, int ignoreframes,
738 int cidmode, const char *modulename);
739
740 /* Free card state. Calls hardware dependent gigaset_free[b]cs(). */
741 void gigaset_freecs(struct cardstate *cs);
742
743 /* Tell common.c that hardware and driver are ready. */
744 int gigaset_start(struct cardstate *cs);
745
746 /* Tell common.c that the device is not present any more. */
747 void gigaset_stop(struct cardstate *cs);
748
749 /* Tell common.c that the driver is being unloaded. */
750 int gigaset_shutdown(struct cardstate *cs);
751
752 /* Tell common.c that an skb has been sent. */
753 void gigaset_skb_sent(struct bc_state *bcs, struct sk_buff *skb);
754
755 /* Append event to the queue.
756 * Returns NULL on failure or a pointer to the event on success.
757 * ptr must be kmalloc()ed (and not be freed by the caller).
758 */
759 struct event_t *gigaset_add_event(struct cardstate *cs,
760 struct at_state_t *at_state, int type,
761 void *ptr, int parameter, void *arg);
762
763 /* Called on CONFIG1 command from frontend. */
764 int gigaset_enterconfigmode(struct cardstate *cs);
765
766 /* cs->lock must not be locked */
gigaset_schedule_event(struct cardstate * cs)767 static inline void gigaset_schedule_event(struct cardstate *cs)
768 {
769 unsigned long flags;
770 spin_lock_irqsave(&cs->lock, flags);
771 if (cs->running)
772 tasklet_schedule(&cs->event_tasklet);
773 spin_unlock_irqrestore(&cs->lock, flags);
774 }
775
776 /* Tell common.c that B channel has been closed. */
777 /* cs->lock must not be locked */
gigaset_bchannel_down(struct bc_state * bcs)778 static inline void gigaset_bchannel_down(struct bc_state *bcs)
779 {
780 gigaset_add_event(bcs->cs, &bcs->at_state, EV_BC_CLOSED, NULL, 0, NULL);
781 gigaset_schedule_event(bcs->cs);
782 }
783
784 /* Tell common.c that B channel has been opened. */
785 /* cs->lock must not be locked */
gigaset_bchannel_up(struct bc_state * bcs)786 static inline void gigaset_bchannel_up(struct bc_state *bcs)
787 {
788 gigaset_add_event(bcs->cs, &bcs->at_state, EV_BC_OPEN, NULL, 0, NULL);
789 gigaset_schedule_event(bcs->cs);
790 }
791
792 /* set up next receive skb for data mode */
gigaset_new_rx_skb(struct bc_state * bcs)793 static inline struct sk_buff *gigaset_new_rx_skb(struct bc_state *bcs)
794 {
795 struct cardstate *cs = bcs->cs;
796 unsigned short hw_hdr_len = cs->hw_hdr_len;
797
798 if (bcs->ignore) {
799 bcs->rx_skb = NULL;
800 } else {
801 bcs->rx_skb = dev_alloc_skb(bcs->rx_bufsize + hw_hdr_len);
802 if (bcs->rx_skb == NULL)
803 dev_warn(cs->dev, "could not allocate skb\n");
804 else
805 skb_reserve(bcs->rx_skb, hw_hdr_len);
806 }
807 return bcs->rx_skb;
808 }
809
810 /* append received bytes to inbuf */
811 int gigaset_fill_inbuf(struct inbuf_t *inbuf, const unsigned char *src,
812 unsigned numbytes);
813
814 /* ===========================================================================
815 * Functions implemented in interface.c
816 */
817
818 /* initialize interface */
819 void gigaset_if_initdriver(struct gigaset_driver *drv, const char *procname,
820 const char *devname);
821 /* release interface */
822 void gigaset_if_freedriver(struct gigaset_driver *drv);
823 /* add minor */
824 void gigaset_if_init(struct cardstate *cs);
825 /* remove minor */
826 void gigaset_if_free(struct cardstate *cs);
827 /* device received data */
828 void gigaset_if_receive(struct cardstate *cs,
829 unsigned char *buffer, size_t len);
830
831 #endif
832