1 /*
2 * SMC 37C93X initialization code
3 */
4
5 #include <linux/kernel.h>
6
7 #include <linux/mm.h>
8 #include <linux/init.h>
9 #include <linux/delay.h>
10
11 #include <asm/hwrpb.h>
12 #include <asm/io.h>
13 #include <asm/segment.h>
14
15 #define SMC_DEBUG 0
16
17 #if SMC_DEBUG
18 # define DBG_DEVS(args) printk args
19 #else
20 # define DBG_DEVS(args)
21 #endif
22
23 #define KB 1024
24 #define MB (1024*KB)
25 #define GB (1024*MB)
26
27 /* device "activate" register contents */
28 #define DEVICE_ON 1
29 #define DEVICE_OFF 0
30
31 /* configuration on/off keys */
32 #define CONFIG_ON_KEY 0x55
33 #define CONFIG_OFF_KEY 0xaa
34
35 /* configuration space device definitions */
36 #define FDC 0
37 #define IDE1 1
38 #define IDE2 2
39 #define PARP 3
40 #define SER1 4
41 #define SER2 5
42 #define RTCL 6
43 #define KYBD 7
44 #define AUXIO 8
45
46 /* Chip register offsets from base */
47 #define CONFIG_CONTROL 0x02
48 #define INDEX_ADDRESS 0x03
49 #define LOGICAL_DEVICE_NUMBER 0x07
50 #define DEVICE_ID 0x20
51 #define DEVICE_REV 0x21
52 #define POWER_CONTROL 0x22
53 #define POWER_MGMT 0x23
54 #define OSC 0x24
55
56 #define ACTIVATE 0x30
57 #define ADDR_HI 0x60
58 #define ADDR_LO 0x61
59 #define INTERRUPT_SEL 0x70
60 #define INTERRUPT_SEL_2 0x72 /* KYBD/MOUS only */
61 #define DMA_CHANNEL_SEL 0x74 /* FDC/PARP only */
62
63 #define FDD_MODE_REGISTER 0x90
64 #define FDD_OPTION_REGISTER 0x91
65
66 /* values that we read back that are expected ... */
67 #define VALID_DEVICE_ID 2
68
69 /* default device addresses */
70 #define KYBD_INTERRUPT 1
71 #define MOUS_INTERRUPT 12
72 #define COM2_BASE 0x2f8
73 #define COM2_INTERRUPT 3
74 #define COM1_BASE 0x3f8
75 #define COM1_INTERRUPT 4
76 #define PARP_BASE 0x3bc
77 #define PARP_INTERRUPT 7
78
SMCConfigState(unsigned long baseAddr)79 static unsigned long __init SMCConfigState(unsigned long baseAddr)
80 {
81 unsigned char devId;
82
83 unsigned long configPort;
84 unsigned long indexPort;
85 unsigned long dataPort;
86
87 int i;
88
89 configPort = indexPort = baseAddr;
90 dataPort = configPort + 1;
91
92 #define NUM_RETRIES 5
93
94 for (i = 0; i < NUM_RETRIES; i++)
95 {
96 outb(CONFIG_ON_KEY, configPort);
97 outb(CONFIG_ON_KEY, configPort);
98 outb(DEVICE_ID, indexPort);
99 devId = inb(dataPort);
100 if (devId == VALID_DEVICE_ID) {
101 outb(DEVICE_REV, indexPort);
102 /* unsigned char devRev = */ inb(dataPort);
103 break;
104 }
105 else
106 udelay(100);
107 }
108 return (i != NUM_RETRIES) ? baseAddr : 0L;
109 }
110
SMCRunState(unsigned long baseAddr)111 static void __init SMCRunState(unsigned long baseAddr)
112 {
113 outb(CONFIG_OFF_KEY, baseAddr);
114 }
115
SMCDetectUltraIO(void)116 static unsigned long __init SMCDetectUltraIO(void)
117 {
118 unsigned long baseAddr;
119
120 baseAddr = 0x3F0;
121 if ( ( baseAddr = SMCConfigState( baseAddr ) ) == 0x3F0 ) {
122 return( baseAddr );
123 }
124 baseAddr = 0x370;
125 if ( ( baseAddr = SMCConfigState( baseAddr ) ) == 0x370 ) {
126 return( baseAddr );
127 }
128 return( ( unsigned long )0 );
129 }
130
SMCEnableDevice(unsigned long baseAddr,unsigned long device,unsigned long portaddr,unsigned long interrupt)131 static void __init SMCEnableDevice(unsigned long baseAddr,
132 unsigned long device,
133 unsigned long portaddr,
134 unsigned long interrupt)
135 {
136 unsigned long indexPort;
137 unsigned long dataPort;
138
139 indexPort = baseAddr;
140 dataPort = baseAddr + 1;
141
142 outb(LOGICAL_DEVICE_NUMBER, indexPort);
143 outb(device, dataPort);
144
145 outb(ADDR_LO, indexPort);
146 outb(( portaddr & 0xFF ), dataPort);
147
148 outb(ADDR_HI, indexPort);
149 outb((portaddr >> 8) & 0xFF, dataPort);
150
151 outb(INTERRUPT_SEL, indexPort);
152 outb(interrupt, dataPort);
153
154 outb(ACTIVATE, indexPort);
155 outb(DEVICE_ON, dataPort);
156 }
157
SMCEnableKYBD(unsigned long baseAddr)158 static void __init SMCEnableKYBD(unsigned long baseAddr)
159 {
160 unsigned long indexPort;
161 unsigned long dataPort;
162
163 indexPort = baseAddr;
164 dataPort = baseAddr + 1;
165
166 outb(LOGICAL_DEVICE_NUMBER, indexPort);
167 outb(KYBD, dataPort);
168
169 outb(INTERRUPT_SEL, indexPort); /* Primary interrupt select */
170 outb(KYBD_INTERRUPT, dataPort);
171
172 outb(INTERRUPT_SEL_2, indexPort); /* Secondary interrupt select */
173 outb(MOUS_INTERRUPT, dataPort);
174
175 outb(ACTIVATE, indexPort);
176 outb(DEVICE_ON, dataPort);
177 }
178
SMCEnableFDC(unsigned long baseAddr)179 static void __init SMCEnableFDC(unsigned long baseAddr)
180 {
181 unsigned long indexPort;
182 unsigned long dataPort;
183
184 unsigned char oldValue;
185
186 indexPort = baseAddr;
187 dataPort = baseAddr + 1;
188
189 outb(LOGICAL_DEVICE_NUMBER, indexPort);
190 outb(FDC, dataPort);
191
192 outb(FDD_MODE_REGISTER, indexPort);
193 oldValue = inb(dataPort);
194
195 oldValue |= 0x0E; /* Enable burst mode */
196 outb(oldValue, dataPort);
197
198 outb(INTERRUPT_SEL, indexPort); /* Primary interrupt select */
199 outb(0x06, dataPort );
200
201 outb(DMA_CHANNEL_SEL, indexPort); /* DMA channel select */
202 outb(0x02, dataPort);
203
204 outb(ACTIVATE, indexPort);
205 outb(DEVICE_ON, dataPort);
206 }
207
208 #if SMC_DEBUG
SMCReportDeviceStatus(unsigned long baseAddr)209 static void __init SMCReportDeviceStatus(unsigned long baseAddr)
210 {
211 unsigned long indexPort;
212 unsigned long dataPort;
213 unsigned char currentControl;
214
215 indexPort = baseAddr;
216 dataPort = baseAddr + 1;
217
218 outb(POWER_CONTROL, indexPort);
219 currentControl = inb(dataPort);
220
221 printk(currentControl & (1 << FDC)
222 ? "\t+FDC Enabled\n" : "\t-FDC Disabled\n");
223 printk(currentControl & (1 << IDE1)
224 ? "\t+IDE1 Enabled\n" : "\t-IDE1 Disabled\n");
225 printk(currentControl & (1 << IDE2)
226 ? "\t+IDE2 Enabled\n" : "\t-IDE2 Disabled\n");
227 printk(currentControl & (1 << PARP)
228 ? "\t+PARP Enabled\n" : "\t-PARP Disabled\n");
229 printk(currentControl & (1 << SER1)
230 ? "\t+SER1 Enabled\n" : "\t-SER1 Disabled\n");
231 printk(currentControl & (1 << SER2)
232 ? "\t+SER2 Enabled\n" : "\t-SER2 Disabled\n");
233
234 printk( "\n" );
235 }
236 #endif
237
SMC93x_Init(void)238 int __init SMC93x_Init(void)
239 {
240 unsigned long SMCUltraBase;
241 unsigned long flags;
242
243 local_irq_save(flags);
244 if ((SMCUltraBase = SMCDetectUltraIO()) != 0UL) {
245 #if SMC_DEBUG
246 SMCReportDeviceStatus(SMCUltraBase);
247 #endif
248 SMCEnableDevice(SMCUltraBase, SER1, COM1_BASE, COM1_INTERRUPT);
249 DBG_DEVS(("SMC FDC37C93X: SER1 done\n"));
250 SMCEnableDevice(SMCUltraBase, SER2, COM2_BASE, COM2_INTERRUPT);
251 DBG_DEVS(("SMC FDC37C93X: SER2 done\n"));
252 SMCEnableDevice(SMCUltraBase, PARP, PARP_BASE, PARP_INTERRUPT);
253 DBG_DEVS(("SMC FDC37C93X: PARP done\n"));
254 /* On PC164, IDE on the SMC is not enabled;
255 CMD646 (PCI) on MB */
256 SMCEnableKYBD(SMCUltraBase);
257 DBG_DEVS(("SMC FDC37C93X: KYB done\n"));
258 SMCEnableFDC(SMCUltraBase);
259 DBG_DEVS(("SMC FDC37C93X: FDC done\n"));
260 #if SMC_DEBUG
261 SMCReportDeviceStatus(SMCUltraBase);
262 #endif
263 SMCRunState(SMCUltraBase);
264 local_irq_restore(flags);
265 printk("SMC FDC37C93X Ultra I/O Controller found @ 0x%lx\n",
266 SMCUltraBase);
267 return 1;
268 }
269 else {
270 local_irq_restore(flags);
271 DBG_DEVS(("No SMC FDC37C93X Ultra I/O Controller found\n"));
272 return 0;
273 }
274 }
275